Engineering Commons^™

Quick Mobile Power Unit Trailer Connections, Patrick A. Beahan, Sam Ali, Eric Allon, Benjamin Robinson

Mechanical Engineering

This Final Design Review document encompasses the entirety of a sponsored senior project which was conducted by a group of four undergraduate mechanical engineers at California Polytechnic University San Luis Obispo. The primary sponsor of this project was Solar Turbines, a subsidiary of Caterpillar Incorporated. Solar Turbines is in the business of development and application of modern-day energy solutions with a large focus on gas powered turbines. Cal Poly acted as a supplemental support of this project and provide the students with mentorship as well as access to its state-of-the-art facilities for the development of an innovative solution to the …

Adaptive Exercise Equipment, Jake Ryan Walejko, Spencer Goodman, Kalina Burns, Journey Martinson

Mechanical Engineering

This document outlines the senior design project carried out by a team of mechanical engineering students at California Polytechnic State University, San Luis Obispo. The task is to design adapted exercise equipment for the non-profit organization, Achievement House. The objective of this Final Design Review is to document the final design, manufacturing plan, design verification plan, and project management plan. In addition, this document includes previously presented information on the project background, objectives, and concept design. The background and objective sections document various forms of customer research and include the project goals developed by the athletes and fitness instructors of …

Vehicle Wheelchair Storage Final Design Report, Alexander Nicholas Cherry, Alex Morcate, Chloe Ng, Tyler Habu

Mechanical Engineering

Many people who use wheelchairs are very active. They have errands to run and lives to live just like everybody else. For a busy person who uses a wheelchair there are currently no quick methods for storing and unloading your wheelchair from your vehicle that do not require expensive custom modifications which can ruin the resell value and the aesthetics of the vehicle. This has resulted in users hastily loading their wheelchairs which can cause damage to the wheelchair, the vehicle, and other passengers while the vehicle is in motion. The goal of this project was to develop a wheelchair …

California Solar Regatta, Nathan Harris Carlson, Niko Delfino Magaña Banks, Alexander R. Larson, Eric Steven Rinell

Mechanical Engineering

This Final Design Review report details the research, analysis, and design conducted by a Cal Poly Mechanical Engineering senior project team working on the propulsion system for a solar powered boat. Working in coordination with another senior project team responsible for making the hull, the two teams comprised the Cal Poly team who entered the Sacramento Municipal Utility District (SMUD) 2020 California Solar Regatta Competition. The SMUD Solar Regatta is an annual competition for high school and college students to design and build boats powered by solar power. The solar panels are provided by SMUD, and the battery storage is …

California Solar Regatta - Hull Team: Up A Creek, Torrey Duncan, Sean Neuman, Kyle Krietzman, Andrew Offhaus

Mechanical Engineering

The SMUD Solar Regatta competition tasks students with developing a solar-powered watercraft to compete in various events on a fresh water lake. Cal Poly has created two mechanical engineering senior project groups to coordinate the design of a boat for the Solar Regatta competition. Up a Creek, the boat construction team, has created the following Final Design Review document to highlight the group’s progress on the project over the year. This document captures the design process from the background research, project objectives, and early concepts to the final design, manufacturing processes, and planned testing procedures. Unfortunately, the COVID-19 pandemic halted …

Përformanca E Teknologjisë Së Turbinave Me Erë Dhe Efikasiteti I Tyre, Njomza Heta

Theses and Dissertations

Ky punim mundëson njohjen e shëndrrimit të energjisë së ripërtëritshme, konkretisht Energjinë me erë. Turbinat me erë kanë efikasitet gjenerues optimal, në përfitimin e energjisë elektrike dhe punë operacionale prej 80% kanë efikasitet në kontrollin ne lëndën që e prodhojnë, gjithashtu mund të jenë financiarisht në varësi të qëllimit dhe vendit ku i pozicionojm, kjo energji është tërsisht natyrale. Në ketë punim në formë të detajuar është paraqitur performanca e turbinave dhe teknologjia inovative e përdorur në sistemin e koncentrimit të tipit të gjerë e ndikuar nga pozita gjeografike ku janë të vendosura turbinat. Tipi i fermave (eco-parqe) më të …

Research On School Zone Safety, Aemal Khattak, Yashu Kang

Nebraska Department of Transportation: Research Reports

This research investigated different aspects of school zone safety including the effects of speed differentials on drivers’ speeds in active school zones, the effects of school and surrounding characteristics on drivers’ speeds in active school zones, and the safety benefits and costs associated with active school zones. The research team identified 18 schools in Nebraska for data collection that consisted of drivers’ speed data, school and surrounding characteristics, and 2014-2018 reported crash data. The 18 schools were categorized by the school zone speed limit differentials: 35 to 25 mph, 40 to 25 mph, 30 to 25 mph, and 35 to …

Xas Analysis Of Copper Binding In Soils, Wapakorn Siriwong, Penphitcha Amonpattaratkit, Wantana Klysubun

Journal of Metals, Materials and Minerals

Ecological distribution of copper from soil is depended on its bioavailability and mobility. Copper binding on heterogeneous soil composition is a key information for understanding the long-term fate benefiting suitable management practice for copper in the environment. X-ray absorption spectroscopy (XAS) techniques were used to provide microscopic scale information of copper-binding on different soils. Soil samples containing 14.9-56.6% clay and 0.5-3.4% organic matter were studied. Dry-powder soil samples containing approximated 0.3% copper from batch equilibrated equilibrium experiments were analyzed. Copper K-edge spectrum were collected at the Synchrotron light research institute (SLRI), Thailand in X-ray absorption near edge structure (XANES) and …

Preparation Of Alginate/2-Hydroxyethyl Methacrylate Composite Beads: Role Of Fillers And Characteristics Of Bead Formation, Somkiet Urusetthanon, Somchai Udon, Boonsri Kusuktham

Journal of Metals, Materials and Minerals

In this research, alginate composite beads were prepared. The objective was to study the effect of particle size of fillers on the viscosity of alginate solution and bead formation. The sodium alginate solution with and without 2-hydroxyethyl methacrylate was dropped into calcium chloride to form the beads. The polymerization of the 2-hydroxyethyl methacrylate in the alginate matrix was occurred by using potassium persulphate as an initiator and N,N/-methylenebisacrylamide as a crosslinking agent and N,N,N/,N/ -tetramethylethylenediamine in the calcium chloride solution as an accelerator. For the preparation of the composite beads, the cotton dust, and sawdust at various ratios were mixed …

Effect Of Polystyrene Molecular Weight And Zinc Oxide Concentration On Dewetting Behavior Of Polymeric Thin Films, Kattaleeya Sujaroon, Phanawan Whangdee, Nampueng Pangpaiboon

Journal of Metals, Materials and Minerals

The separation between ultra-thin polymer film on metal oxide substrate is called dewetting. Dewetting causes the polymer films to loss their stability and other important properties, for example, the films may short circuit or reduce their transparency. Therefore, the stability of polymer thin films on substrate need to be improved. Addition of nanoparticles is one of the most popular technique used to increase the stability of polymer thin films. The correlation between the different of molecular weight and ZnO concentration on dewetting behavior was studied in this research. The appropriate concentration of ZnO on dewetting suppression in each molecular weight …

Effects Of Sodium Silicate As Liquid Phase Sintering Additives On Properties Of Alumina Ceramics, Kanyapak Siriphaisarntavee, Charusporn Mongkolkachit, Mateekul Jiarawattananon, Karn Serivalsatit, Thanakorn Wasanapiarnpong

Journal of Metals, Materials and Minerals

This research focused on the production of high-performance alumina products. The feasibility of using soluble alkali silicate in liquid phase sintering of alumina was studied. Liquid soluble alkali silicate was used to enhance the plastic forming of alumina and formed liquid phase sintering to attain fired alumina products with high strength, high alumina content and low water absorption. The methodology consisted of the mixing of organic binder with sodium silicate (Na2SiO3), used as liquid phase sintering additive, of 0-15 wt%. Magnesium carbonate (MgCO3), used as the grain growth inhibitor, of 0-1 wt% were added and followed by alumina powders. The …

Analysis Of Aquifer And Operational Conditions For Successful Soil Aquifer Treatment Of Treated Wastewater Via Synthesis Of Published Full-Scale And Laboratory-Scale Studies, Matthew I. Murray

Master's Theses

Soil aquifer treatment (SAT) of treated wastewater performance was evaluated across published full-scale and lab-scale studies developing insights on the aquifer and operational factors that affect SAT efficacy. The goal of this study was to develop a basis for predicting the contaminant removal capabilities of any given aquifer during managed recharge with treated wastewater.

Over 40 published SAT studies were reviewed and systematically compared to determine the influence of five major factors on contaminant removal performance: geologic composition, geochemical conditions, hydrogeological conditions, operational methods, and source water quality. Removal mechanisms for standard contaminants (dissolved and total organic carbon, nitrogen, and …

Analysis And Optimization Of Colorimetric Nanosensors For Rapid Detection Of Microbes In Water, Ruby A. Lang

Master's Theses

Access to safe water is a basic human right recognized by the United Nations General Assembly in 2010 (WHO, 2020). However, a least 2.2 billion people globally still are without safely managed water services meaning they use a drinking water source that can be contaminated with faeces (WHO, 2020). With such a pressing global health issue, it is clear that improvement to water systems is important and required in the Agenda 2030 Sustainable Development Goals (SDGs). However, to improve water systems and prove they are safe water sources, water quality testing must occur. A solution to this issue is the …

Pier Portal, Alec W. Hardy

Master's Theses

The Pier Portal marine monitoring system is an internet controlled underwater camera that will enable students, researchers, and the general public the ability to monitor underwater marine life and ocean conditions. Installed at Cal Poly’s Center for Coastal Marine Science pier at Avila Beach, California, the camera can be commanded in real-time to raise or lower to any position between the top of the pier and the bottom of the ocean floor, while providing a live-stream video to the operator and general public. This thesis effort focused on the integration of the various subsystem components through software, and the development …

Closing The Data-Decisions Loop: Deploying Artificial Intelligence For Dynamic Resource Management, Pradeep Varakantham

Asian Management Insights

Improving predictions and allocations to determine the optimal matching of demand and supply in a dynamic, uncertain future.

The Effect Of Climate Change On Groundwater Recharge In The United Arab Emirates, Yuliya Fadlallah Saade

Civil and Environmental Theses

Climate change is impacting ecosystems and the water resources by causing temperature variation. Evapotranspiration rates are increasing when the temperature is high whereas, precipitation amount and intensity are varying based on geographical locations.

This change in precipitation has an inevitable impact on the groundwater recharge. Quantification of groundwater recharge is a prerequisite for efficient and sustainable groundwater resources management in arid regions.

Although, both surface and groundwater resources in the United Arab Emirates (UAE) are scarce; the anticipated climate change impacts could make these resources even scarcer. As such, the main aim of this thesis is to assess the potential …

An Analysis Of A Hurricane Loss Model, Validation From Tyndall Afb, And Applications For The Air Force, Nestor Hernandez

Theses and Dissertations

Recent reconstruction of infrastructure and its associated cost due to hurricanes justify research into hurricane loss models that can provide a more robust cost estimate. Academic research indicates that hurricane disasters are becoming more frequent and are becoming costlier. This research intends to explore hurricane loss models used by Federal Emergency Management Agency (FEMA), Risk Management Solution (RMS) and Florida State University (FSU). Within the literature review, key components of hurricane loss models were identified. These models and the key components were explored in order to help bring an understanding of loss estimation. The research found that the implementation of …

Design And Test Of An Autonomy Monitoring Service To Detect Divergent Behaviors On Unmanned Aerial Systems, Loay Y. Almannaei

Theses and Dissertations

Operation of Unmanned Aerial Vehicles (UAV) support many critical missions in the United State Air Force (USAF). Monitoring abnormal behavior is one of many responsibilities of the operator during a mission. Some behaviors are hard to be detect by an operator, especially when flying one or more autonomous vehicles; as such, detections require a high level of attention and focus to flight parameters. In this research, a monitoring system and its algorithm are designed and tested for a target fixed-wing UAV. The Autonomy Monitoring Service (AMS) compares the real vehicle or simulated Vehicle with a similar simulated vehicle using Software …

Tension-Tension Fatigue Behavior Of Nextel™ 720/Alumina-Mullite Ceramic Composite At 1200°C In Air And In Steam, Sarah A. Witzgall

Theses and Dissertations

Uniaxial tension-tension fatigue performance of an oxide-oxide continuous fiber ceramic composite was studied at 1200°C in laboratory air and in steam. The composite is reinforced with laminated, 0/90 mullite/alumina (NEXTEL™720) fibers woven in an eight-harness satin weave and has a porous alumina/mullite matrix. There is no interphase between the fiber and matrix. The composite relies on the porous matrix for crack deflection and flaw tolerance. Tension-tension fatigue was examined for maximum stresses of 45 – 136 MPa in air and in steam. To assess the effects of the steam environment on fatigue performance, experimental results obtained in air are compared …

Work-In-Progress: Augmented Reality System For Vehicle Health Diagnostics And Maintenance, Yuzhong Shen, Anthony W. Dean, Rafael Landaeta

Electrical & Computer Engineering Faculty Publications

This paper discusses undergraduate research to develop an augmented reality (AR) system for diagnostics and maintenance of the Joint Light Tactical Vehicle (JLTV) employed by U.S. Army and U.S. Marine Corps. The JLTV’s diagnostic information will be accessed by attaching a Bluetooth adaptor (Ford Reference Vehicle Interface) to JLTV’s On-board diagnostics (OBD) system. The proposed AR system will be developed for mobile devices (Android and iOS tablets and phones) and it communicates with the JLTV’s OBD via Bluetooth. The AR application will contain a simplistic user interface that reads diagnostic data from the JLTV, shows vehicle sensors, and allows users …

Virginia Digital Shipbuilding Program (Vdsp): Building An Agile Modern Workforce To Improve Performance In The Shipbuilding And Ship Repair Industry, Joseph Peter Kosteczko, Katherine Smith, Jessica Johnson, Rafael Diaz

VMASC Publications

Industry 4.0 is the latest stage in the Industrial Revolution and is reflected in the digital transformation and use of emergent technologies including the Internet of Things, Big Data, Robotic automation of processes, 3D printing and additive manufacturing, drones and Artificial Intelligence (AI) in the manufacturing industry. The implementation of these technologies in the Shipbuilding and Ship Repair Industry is currently in a nascent stage. Considering this, there is huge potential to increase cost savings, decrease production timelines, and drive down inefficiencies in Lifecyle management of ships. However, the implementation of these Industry 4.0 technologies is hindered by a noticeable …

A Multi-Criteria Logistics Analysis Of Photovoltaic Modules For Remote Applications, Nathan Thomsen, Dimitri Papazoglou, Torrey J. Wagner, Andrew J. Hoisington, Steven J. Schuldt

Faculty Publications

Reliable electrical power grids are frequently unavailable or inaccessible in remote locations, including developing nation communities, humanitarian relief camps, isolated construction sites, and military contingency bases. This often requires sites to rely on costly generators and continuous fuel supply. Renewable energy systems (RES) in the form of photovoltaic (PV) arrays and energy storage present a rapidly improving alternative to power these remote locations. Previous RES literature and PV optimization models focused on economics, reliability, and environmental concerns, neglecting the importance of logistics factors in remote installations. This paper proposes additional optimization variables applicable to remote PV systems and compares PV …

Detection Of Hydroxyl Radicals Using Cerium Oxide/Graphene Oxide Composite On Prussian Blue, Surachet Duanghathaipornsuk, Sushil R. Kanel, Emily F. Haushalter, Jessica Ruetz, Dong-Shik Kim

Faculty Publications

A composite sensor consisting of two separate inorganic layers of Prussian blue (PB) and a composite of cerium oxide nanoparticles (CeNPs) and graphene oxide (GO), is tested with •OH radicals. The signals from the interaction between the composite layers and •OH radicals are characterized using cyclic voltammetry (CV). The degradation of PB in the presence of H₂O₂ and •OH radicals is observed and its impact on the sensor efficiency is investigated. The results show that the composite sensor differentiates between the solutions with and without •OH radicals by the increase of electrochemical redox current in the presence …

Meeting Temporary Facility Energy Demand With Climate-Optimized Off-Grid Energy Systems, Jay F. Pearson, Torrey J. Wagner, Justin D. Delorit, Steven J. Schuldt

Faculty Publications

Remote and contingency operations, including military and disaster-relief activities, often require the use of temporary facilities powered by inefficient diesel generators that are expensive to operate and maintain. Site planners can reduce operating costs by increasing shelter insulation and augmenting generators with photovoltaic-battery hybrid energy systems, but they must select the optimal design configuration based on the region’s climate to meet the power demand at the lowest cost. To assist planners, this paper proposes an innovative, climate-optimized, hybrid energy system selection model capable of selecting the facility insulation type, solar array size, and battery backup system to minimize the annual …

Nondestructive Electromagnetic Characterization Of Uniaxial Sheet Media Using A Two-Flanged Rectangular Waveguide Probe, Neil G. Rogers, Michael J. Havrilla, Milo W. Hyde Iv, Alexander G. Knisely

Faculty Publications

Excerpt: Recent advancements in fabrication capabilities have renewed interest in the electromagnetic characterization of complex media, as many metamaterials are anisotropic and/or inhomogeneous. Additionally, for composite materials, anisotropy can be introduced by load, strain, misalignment, or damage through the manufacturing process [1], [2]. Methods for obtaining the constitutive parameters for isotropic materials are well understood and widely employed [3]–[8]. Therefore, it is crucial to develop a practical method for the electromagnetic characterization of anisotropic materials.

Process-Dependent Composition, Microstructure, And Printability Of Al-Zn-Mg And Al-Zn-Mg-Sc-Zr Alloys Manufactured By Laser Powder Bed Fusion, Le Zhou, Holden Hyer, Saket Thapliyal, Rajiv S. Mishra, Brandon Mcwilliams, Kyu Cho, Yongho Sohn

Mechanical Engineering Faculty Research and Publications

Additive manufacturing (AM) technology for metallic alloys such as laser powder bed fusion (LPBF) brings tremendous opportunities for development of novel alloys specifically designed for AM that would desensitize the inherent process variability and requires a refined understanding of processing–structure–property relationship that would contribute to future alloy development. In this study, two different alloys, Al-6Zn-2Mg and Al-6Zn-2Mg-0.7Sc-0.3Zr in wt. pct, representing traditional and AM-specific novel aluminum alloys, respectively, were manufactured by LPBF technique using pre-alloyed gas atomized powders. The Al-Zn-Mg ternary alloys exhibited cracks at various LPBF processing parameters, primarily along the grain boundaries of the large columnar grains that …

Surface Autonomous Vehicle For Emergency Rescue, Max Emerick, Ryan Shields, Christopher Feickert, Raymond Impara

Mechanical Engineering

The goal of this document is to clearly define the problem parameters and project objectives and to clearly describe the design process, planned final design, and manufacturing and testing procedures for the senior design project of Team 26: SAVER -- the Surface Autonomous Vehicle for Emergency Rescue. This is both for the purpose of project planning and for clear communication between all parties involved in the project.

The objective of the SAVER project is to develop a proof of concept for an autonomous maritime search and rescue vehicle for aiding in man-overboard missions. To accomplish this goal, a list of …

Experimental Investigation For Moment Redistribution In Continuous Rc Beams Top Strengthened With Cfrp And Steel Plates, Amr Ibrahim, Shady Salem, Ayman Khalil, Mahmoud El-Kateb

Civil Engineering

An experimental study was conducted on eight T-section continuous reinforced concrete beams top strengthened with CFRP and steel plates. The beams had a constant cross section and flexural steel reinforcement which was designed to prevent brittle failure due to crushing of concrete before steel yielding. The plates were installed on both sides of the slab above the beam web as near surface mounted or externally bonded to investigate the effect of different plating techniques on the moment redistribution in reinforced concrete beams. The number of plates in each specimen was changed. Steel stirrups were used and designed so that no …

Analysis Of Burning Wood In The Transient State And The Application To Structural Design, Roberta Veliz, Kimberly Guzman

Architectural Engineering

Determining the extent of the contribution of exposed timber on compartment fire dynamics in open floor plans is a complex process. Designers traditionally used compartmentalization design methods which create spaces where flashover is likely, given the fuel load and ventilation conditions. However, due to the large geometric dimensions and spread of fuel, fires in open floor plans are more likely to remain as localized or traveling fires. As such, an understanding of not only ignition potential but also flame spread is critical to characterizing the contribution of exposed timber. An integral step in characterizing the potential contribution is through an …

Wine History Project Pavilion, Douglas Mcarthur

Architectural Engineering

The Wine History Pavilion Project is a continuing endeavor of Cal Poly students working on an exhibitive, traveling structure for the San Luis Obispo community. The project started during the 2019 Fall Quarter in the interdisciplinary Integrated Project Delivery (IPD) Studio and has progressed to the detailed design stage for its eventual fabrication and installation. This report discusses the detailed design stage that 4th year Architectural Engineering student, Douglas McArthur, worked on.