Engineering Commons^™

Airline Brand Experience Passengers’ Perceptions Of The Big Three Carriers In The United States, Sarinthree Udchachone

Theses and Dissertations

The purpose of the study was to observe passengers’ perceptions about brand experience research in the airline industry by applying a transcendental or descriptive phenomenological methodology designed to evaluate interview transcriptions and organize derived knowledge into defined themes. The NVivo program was utilized to analyze data from textual transcriptions. The experiences of passengers of the Big Three United States legacy carriers, including American Airlines, Delta Air Lines, and United Airlines, were described. The participants comprised three couples and seven individuals, all frequent-flyer members of the Big Three carriers and their partnering global airline alliances. The researcher-constructed instrument was used for …

Surface Functionalization Of Biomedical Ti-6al-7nb Alloy By Liquid Metal Dealloying, Ilya Vladimirovich Okulov, Soo Hyun Joo, Artem Vladimirovich Okulov, Alexey Sergeevich Volegov, Bérengère Luthringer, Regine Willumeit-Römer, Lai-Chang Zhang, Lutz Mädler, Jürgen Eckert, Hidemi Kato

Research outputs 2014 to 2021

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. Surface functionalization is an effective approach to change the surface properties of a material to achieve a specific goal such as improving the biocompatibility of the material. Here, the surface of the commercial biomedical Ti-6Al-7Nb alloy was functionalized through synthesizing of a porous surface layer by liquid metal dealloying (LMD). During LMD, the Ti-6Al-7Nb alloy is immersed in liquid magnesium (Mg) and both materials react with each other. Particularly, aluminum (Al) is selectively dissolved from the Ti-6Al-7Nb alloy into liquid Mg while titanium (Ti) and niobium (Nb) diffuse along the metal/liquid …

Light Reflection Loss Reduction By Nano-Structured Gratings For Highly Efficient Next-Generation Gaas Solar Cells, Narottam Das, Devanandh Chandrasekar, Mohammad Nur-E-Alam, M. K.Masud Khan

Research outputs 2014 to 2021

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. This paper mainly focuses on increasing the conversion efficiency of GaAs solar cells by reducing the light reflection losses. The design of nano-structured gratings and their light trapping performance are modelled and optimised by using the finite-difference time-domain (FDTD) method. The sunlight directly impinges on the solar panel or cells, then a portion of the incident sunlight reflects back to the air from the surface of the panel, thus leading to a reduction in the light absorption capacity of the solar cells. In order to proliferate the light absorption capacity of …

Atomically Thin Heavy-Metal-Free Znte Nanoplatelets Formed From Magic-Size Nanoclusters, Fei Wang, Minyi Zhang, Wei Chen, Shaghraf Javaid, Heng Yang, Sheng Wang, Xuyong Yang, Lai-Chang Zhang, Mark A. Buntine, Chunsen Li, Guohua Jia

Research outputs 2014 to 2021

© The Royal Society of Chemistry. Atomically thin colloidal quasi-two-dimensional (2D) semiconductor nanoplatelets (NPLs) have attracted tremendous attention due to their excellent properties and stimulating applications. Although some advances have been achieved in Cd- and Pb-based semiconductor NPLs, research into heavy-metal-free NPLs has been reported less due to the difficulties in the synthesis and the knowledge gap in the understanding of the growth mechanism. Herein wurtzite ZnTe NPLs with an atomic thickness of about 1.5 nm have been successfully synthesized by using Superhydride (LiEt3BH) reduced tributylphosphine-Te (TBP-Te) as the tellurium precursor. Mechanistic studies, both experimentally and theoretically, elucidate the transformation …

Nonlinear Control And Observation Of Full-Variable Speed Wind Turbine Systems., Nicholas Hawkins

Electronic Theses and Dissertations

With increasing concern for the environmental effects of power generation from fossil fuels, wind energy is a competitive source for electrical power with higher efficiency than other clean sources. However, the nature of this power source makes controlling wind turbines difficult. The variability of wind as a source either requires highly accurate measurement equipment or sophisticated mathematical alternatives. In addition to the unknown quantities of the weather itself, the efficiency of power capture at the turbine blades is highly nonlinear in nature and difficult to ascertain. The ability of either determine these troublesome quantities, or control the system despite ignorance …

Model-Based Control Methods To Improve The Power Qualify Of Grid-Connected Single-Phase Inverters., Moath Alqatamin

Electronic Theses and Dissertations

Power electronic converters are commonly used for interfacing distributing generation sources (DGs) to the electrical power system networks. This is necessary because these DGs usually have different output characteristics and cannot be connected directly to the local load and/or the grid. The power electronic front-end converter is an inverter whose dc link is fed by an ac/dc converter or by a dc/dc converter, according to the DG source type. The commercial front-end inverters are designed to operate either in grid-connected (GC) mode or in stand-alone (SA) mode. In the SA mode, the inverter is connected to local load, but in …

Mathematical Models And Analysis For Demand Side Management In Residential Electricity Distribution Networks., Arnab Roy

Electronic Theses and Dissertations

Development of smart grids along with communication technologies have led to the increased attention and adoption of demand side management (DSM) in the residential sector. Among various DSM schemes, demand response (DR) is a market- based mechanism to shave peak electricity consumption at the system level. In the past decade, the academia has seen a growing literature studying load management methodologies for residential consumers. A typical demand response program has three important facets: the energy cost, comfort of the consumers and overall system efficiency. In this dissertation, we investigate and develop models for effective load control to minimize energy cost …

Weber Basin Water Conservancy District Bottom-Up Climate Vulnerability Study Using Riverware, Jacob Everitt

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

With so much uncertainty of what the future has in store for us, how can we prepare for what lies ahead? The Weber Basin Water Conservancy District (WBWCD) needs to know how they can best prepare for future climate changes and future growth, and where their water system is vulnerable. A bottom-up approach can be used to consider how factors and subfactors effect the vulnerability of their water system's storage and delivery. This approach is accomplished with the use of RiverWare, an advanced water system modeling program. Scenarios to represent the factors are as follows: range of future stream flows, …

Investigation Of Various Techniques For Controlled Void Formation In Fiberglass/Epoxy Composites, Donald A. Klosterman, Charles Browning, Issa Hakim, Kyle Lach

Chemical and Materials Engineering Faculty Publications

The effect of porosity in composite materials has been studied for years due to its deleterious effects on mechanical properties, especially matrix dominated properties. Currently there is an increasing use of composites in infrastructure worldwide, for example bridge components, residential and building structures, marine structures such as piers and docks, and large industrial chemical tanks. Most of these applications use fiberglass composites. Unfortunately, most of the published literature has focused on carbon fiber composites, in which fiber diameter and gas-fiber interactions are different than fiberglass composites. Therefore, the present study was undertaken to revisit the effect of porosity but specifically …

Lead Free Piezoelectric And Triboelectric Energy Film For Energy Harvesting And Sensory Applications, Abu Musa Abdullah

Theses and Dissertations

In recent times, Triboelectricity and Piezoelectricity has been widely used for utilizing mechanical energy from ambient environment. Scientists are focusing towards developing advanced material composites for utilizing piezoelectricity and triboelectricity for energy harvesting and sensory applications. This work includes two projects regarding the application of lead free piezoelectric and triboelectric energy for energy harvesting and sensory applications. Human motion has been attributed as a source of mechanical energy to drive electronic devices and sensors through Triboelectric Nanogenerator (TENG). Based on the principles of single electrode TENG, we have developed a Triboelectricity based Stepping and Tapping Energy Case (TESTEC) which magnifies …

Development Of Plant Extract-Based Composite Fibers And Aerogels, Raul C. Barbosa

Theses and Dissertations

The aim of this study is to use the solid templating process of pullulan nanofibers in order to produce biocompatible, biodegradable, and antibacterial aerogels. The developed aerogels were produced using cross-linked pullulan nanofibers, which provide a water-stable structure allowing them to be used as wound dressing material. The morphology, thermal properties, water solubility, and thermal and physical properties of the nanofibers and aerogels were characterized. Furthermore, the antibacterial effect against gram-negative bacteria, Escherichia coli, and the biocompatibility using mouse embryonic fibroblasts (NIH 3T3) were investigated.

Kinetics, Affinity, Thermodynamics, And Selectivity Of Phosphate Removal Using Immobilized Phosphate-Binding Proteins, Kaushik Venkiteshwaran, Erin Wells, Brooke K. Mayer

Civil and Environmental Engineering Faculty Research and Publications

A phosphate (P_i)-selective adsorption system featuring immobilized P_i-binding proteins (PBP) has recently attracted attention for ultralow P_i removal followed by recovery. This study investigated the adsorption kinetics, affinity, thermodynamics, and selectivity, as well as the effect of pH and temperature on P_i adsorption using immobilized PBP (PBP resin). Immobilizing PBP did not affect its P_i affinity. Kinetic studies at 22 °C and pH 7.1 showed that the PBP resin achieved 95% of its equilibrium capacity within 0.64 ± 0.2 min. The estimated Langmuir affinity constant (K_L) was 21 ± 5 …

The Effects Of Radiation On Memristor-Based Electronic Spiking Neural Networks, Sumedha Gandharava Dahl

Boise State University Theses and Dissertations

In this dissertation, memristor-based spiking neural networks (SNNs) are used to analyze the effect of radiation on the spatio-temporal pattern recognition (STPR) capability of the networks. Two-terminal resistive memory devices (memristors) are used as synapses to manipulate conductivity paths in the network. Spike-timing-dependent plasticity (STDP) learning behavior results in pattern learning and is achieved using biphasic shaped pre- and post-synaptic spikes. A TiO₂ based non-linear drift memristor model designed in Verilog-A implements synaptic behavior and is modified to include experimentally observed effects of state-altering, ionizing, and off-state degradation radiation on the device. The impact of neuron “death” (disabled neuron …

Entrepreneurial Based Project: Minority Owned Guardrail Installation Company, Nicholas Rubio

Construction Management

This company will provide commercial and highway guardrail installation services to the Northern California Region. The organization will retain a Minority Owned Business Certification and will operate under a Class C-32 License for Parking and Highway Improvement. Due to the large backlog of guardrail projects and the lack of qualified contractors in Northern California, the company plans to partner with existing firms that are unable to take on work. After firmly establishing ourselves in the private commercial market, the organization plans to migrate to public road work where the Minority Owned title can provide more benefit. Through this process we …

Cable Harness Modeling Using Mtl Parameters Derived From Integral Equations, Muqi Ouyang, Xu Wang, Nevin Altunyurt, Varittha Sanphuang, Nitin Parsa, Jun Fan

Electrical and Computer Engineering Faculty Research & Creative Works

A method to calculate equivalent Multiconductor Transmission-Line (MTL) parameters through integral equations is proposed in this paper. In the mixed-potential integral equations (MPIE), the elements of harness part are converted to MTL parameters based on the relations between MTL parameters and partial elements of 1-D wire segments. Then, to include the effects of reference metal plane nearby, the equivalent MTL parameters can be derived from the MPIE equations with modified harness elements by keeping the solutions on harness part the same. The current distributions on wires calculated using the equivalent MTL parameters have good correlations with the results from the …

Calibration Loop Antenna For Multiple Probe Antenna Measurement System, Yuming Zheng, Zibin Weng, Yihong Qi, Jun Fan, Fuhai Li, Zhiping Yang, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

In order to achieve high accuracy in measurements of the multiple probe antenna measurement system (MPAMS), an omnidirectional calibration antenna with a small gain variation in the horizontal polarization (named calibration loop antenna, in convention) is required. This article presents such an antenna design. The proposed calibration loop antenna consists of four arc-folded dipoles with dimensions of 52 mm x52 mm x 1 mm, balun structures for suppressing common mode current, and four parasitic strips for impedance matching on each of the top and bottom planes. The experimental results show that the proposed calibration loop antenna has a small gain …

Total Isotropic Sensitivity Measurement In Switched Beam Antenna Systems, Jun Li, Yihong Qi, Wei Yu, Fuhai Li, Jun Fan, Zhiping Yang, Songping Wu, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

Smart antenna systems (SAS) play an important role in wireless communication systems, especially in rapidly developing fifth generation (5G) systems. In normal device under test (DUT) applications with SAS, the antenna's state may change in different external environments in order to obtain higher antenna gains and better connection with the base station, resulting in high uncertainties for over-the-air (OTA) tests using conventional methods. Before evaluating the transceiver performance, additional application programs are necessary to control the DUT, which increases the inconvenience for engineers and makes it impossible to reflect the real usage scenario. This article proposes a new convenient method …

Physics-Based Circuit Modeling Methodology For System Power Integrity Analysis And Design, Biyao Zhao, Siqi Bai, Samuel Connor, Wiren Dale Becker, Matteo Cocchini, Jonghyun Cho, Albert E. Ruehli, Bruce Archambeault, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

A physics-based circuit modeling methodology for system-level power integrity (PI) analysis and design is presented herein. The modeling methodology is based on representing the current paths in the power distribution network (PDN) with appropriate circuits based on cavity model and plane-pair partial element equivalent circuit (PEEC). The PDN input impedance looking from on-chip sources can be computed. A commercial simulation tool is used to corroborate the modeling approach where the system consists of a commercial integrated circuit, a complex organic package and a very high-layer-count printed circuit board. Two types of circuit models are proposed from the methodology with physical …

Seismic Design Coefficients For Speedcore Or Composite Plate Shear Walls - Concrete Filled (C-Psw/Cf), Shubham Agrawal, Morgan Broberg, Amit H. Varma

Bowen Laboratory Research Reports

This report summarizes the results from FEMA P695 analytical studies conducted to verify the seismic design factors for composite plate shear walls – concrete filled (C-PSW/CF), also referred to as Speedcore. ASCE 7-16 provides the seismic design factors, which include the seismic response modification factor, R, deflection amplification factor, C_d, and overstrength factor, Ω_o, for various approved seismic systems. C-PSW/CFs are assigned a response modification factor of 6.5, a deflection amplification factor of 5.5, and an overstrength factor of 2.5 for C-PSW/CFs. These seismic design factors were selected based on the seismic performance of similar structural …

Methods For Mass Data Acquisition Of Whiskey Webs., Adam D. Carrithers

Electronic Theses and Dissertations

Whiskey webs are a recently discovered phenomenon in which the monolayer collapse during evaporation of diluted American whiskey results in self-assembled, web-like structures. It was found that the pattern of weblike structures were unique between different American whiskey products. It is desirable to use these unique patterns as a “fingerprint” which can be used to identify whiskeys, their chemical constituents, and perhaps even counterfeits. In pursuit of identifying whiskey products based on their web pattern, it is necessary to have a large database of samples imaged for each product. The device discussed herein is the realization of an apparatus capable …

Experimental Study Of Graphene Energy Absorbing Layer In Femtosecond Infrared Laser Assisted Bioprinting, Chaoran Dou

Theses and Dissertations

The bioprinting, as a new branch of additive manufacturing, already shown its potential in organ transplantation, medicine develop and personalized medicine. There are three types of bioprinting: droplet based bioprinting, extrusion based bioprinting and laser assisted bioprinting (LAB). Compared with other types of bioprinting, the LAB is the only bioprinting method that does not have a nozzle, which gives it the ability to print high viscosity bioink. The LAB also enjoys higher resolution and cell viability than other methods.

The bubble/jet formation process is the most important process for the LAB, which deposits the bioink to the substrate. To utilize …

An Experimental Thrust Measurement Study On The Nozzle Asymmetry Of Turbulent Pulsed Jets, Cesar Alberto Leos Jr.

Theses and Dissertations

The resurgence of pulsejet engines has renewed the interest of the flow characteristics responsible for the high levels of thrust augmentation that are necessary for Vertical/Short Take-Off and Landing (V/STOL) aircraft. It is well known that pulsation of the engine plays an important role on the thrust performance, but many of the characteristics that are primarily responsible for these enhancements are not well understood. This study is carried out to elucidate the effect of nozzle exit Mach number and the nozzle exit geometry on the characteristics of a high Reynolds number (~105), turbulent free pulsed jet.

Direct thrust measurements are …

Hydrothermal Reaction Synthesis And Characterization Of Zns:Ag Scintillator, Yuchen Shao

All Theses

Thisworkaims at the development of a reactive ultrafiltration membrane scintillator for rapid activity determination and isotopic quantification of waterborne special nuclear materials (SNMs) based on ZnS:Ag. The effects of the pH of the precursor solution on ZnS:Ag synthesized under various conditions of temperature and time by the hydrothermal reaction synthesis method (200℃ for 6 hours, pH from 1 to 12; 100℃ for 2 hours, pH from 7 to 12;60℃ for 6 hours, pH from 7 to 12) were investigated. Samples were characterized on their structure, morphology and luminescence by X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), photoluminescence (PL) …

Brillouin Zone Center Phonon Modes In Znga2O4, Megan Stokey, Rafal Korlacki, Sean Knight, Matthew J. Hilfiker, Zbigniew Galazka, Klaus Irmscher, Vanya Darakchieva, Mathias Schubert

Department of Electrical and Computer Engineering: Faculty Publications

Infrared-active lattice mode properties of melt-grown high-quality single bulk crystals of ZnGa₂O₄ are investigated by combined spectroscopic ellipsometry and density functional theory computation analysis. The normal spinel structure crystals are measured by spectroscopic ellipsometry at room temperature in the range of 100 cm^–1–1200 cm^–1. The complex-valued dielectric function is determined from a wavenumber-by-wavenumber approach, which is then analyzed by the four-parameter semi-quantum model dielectric function approach augmented by impurity mode contributions. We determine four infrared-active transverse and longitudinal optical mode pairs, five localized impurity mode pairs, and the high frequency dielectric constant. All …

Climate Change And Market-Based Insurance Feedbacks, Eric R. Holley, Adam Liska, Cory Walters, Geoffrey C. Friesen, Michael Hayes, Max J. Rudolph, Donald A. Wilhite

Adam Liska Papers

Climatic events have accounted for 91% of $1.05 trillion in insured costs for global catastrophic events from 1980 to 2016. Costs are driven by socio-economic development and increased frequency and severity of climatic disasters driven by climate change. Government policies to reduce systemic risk (e.g., cap-and-trade, carbon tax) have been a predominant approach for mitigation and adaptation. Alternatively, market-based incentives for climate change adaptation and mitigation already operate via the insurance industry to lessen impacts on society. Insurance feedbacks include changes in 1) premiums and insurance policies, 2) non-coverage, and 3) policy making and litigation. Alongside government policies, insurance feedbacks …

Analysis Of Body And Tail Of A Flapping Drone, Yuan Chai

Student Works (2020-2029)

The Micro Aerial Vehicle (MAV) is a kind of unmanned aerial vehicle with a small size, which has a unique performance that larger aircrafts do not have. MAV can fly in confined spaces and perform hover, forward flight, etc. The flapping wing micro aerial vehicle is one type of flight imitates the insects (birds), which can fly based on the flapping wing. Compared with fixed-wing aircraft, the flapping wing micro aerial vehicle (FWMAV) has a smaller volume, lighter weight, and higher flight efficiency. FWMAV can be largely used in military and civil applications. In this project, the flapping drone is …

Three-Dimensional (3d) Reconstruction Of Ultrasound Foetal Images Using Visualisation Toolkit (Vtk), Henry Dusim Grace Anabela

Student Works (2020-2029)

Three-dimensional (3D) reconstruction of two-dimensional (2D) ultrasound images has been used for easier analysing of anatomy related to abnormalities. 3D image reconstruction is required as it helps doctors interpret results and assess any defects quickly. Not only does it improve the accuracy of diagnosis, but it also saves a lot of time. In this thesis, 295 slices of 2D ultrasound images of a foetal are used to do 3D reconstruction using surface rendering, volume rendering, and multiplanar rendering technique. A similar software known as 3D Slicer is also used to reconstruct the ultrasound image for comparison purpose. VTK can easily …

Fluid Flow Analysis Of Low-Altitute Agricultural Uav Pesticide Spraying Device, Dan Han

Student Works (2020-2029)

The nozzle is an important part of the drone pesticide spraying device. The quality of the nozzle directly affects the atomization performance. Fan nozzles are widely used in the field of plant protection in agriculture, forestry, pest control, and weed removal. When using drones to spray pesticides, the spraying velocity, the spraying range of the pesticides, and the atomized particle size are all key factors that directly affect the efficiency of pesticide use. This paper uses SOLIDWORKS and ANSYS software to design and simulate. The boundary conditions are kept the same, and the influence of the nozzle's grooving angle (α), …

Synthesis And Characterization Of Bimetallic Gold-Silver (Au-Ag) Nanocatalyst Via Seed Colloid Technique, Berahim Nurafaliana

Student Works (2020-2029)

In the present study, unique catalysts of monometallic gold (Au), silver (Ag) and bimetallic gold-silver (Au-Ag) nanoparticles (NPs) were prepared with different size or diameters by the citrate-thermal reduction and the seed colloidal techniques, respectively. The catalytic nanoparticles were characterized by various advanced analytical techniques such as Ultraviolet-visible spectroscopy (UV-vis), zeta potential, electron dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), High-angle annular dark-field (HAADF) scanning transmission-electron microscopy (STEM) imaging and the energy dispersive spectroscopy (EDS) elemental mapping. The catalytic performance of the nanoparticles were ascertained through the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in …

Cfd Modelling Of Multiphase Flow In Static Mixer, Silverrajan Viknesvaran

Student Works (2020-2029)

Modelling of Multiphase flow through a Kenics static mixer were presented in this paper. Multiphase mixing is a challenging process in industries such as pharmaceutical, food and petroleum since two-different phases can be immiscible towards each other. Stirred tank mixing is the most common method used in industries. However, this type of method costs a lot in terms of energy and manpower specially when mixing immiscible liquids. Hence, The Kenics Static Mixer could be a good solution for multiphase mixing when its correctly configured and studied. Two phases used in this paper were aqueous solution: refined CMC as continuous phase …