Engineering Commons^™

Predicting Complex System Behavior Using Hybrid Modeling And Computational Intelligence, Vinayaka Gude

Doctoral Dissertations

“Modeling and prediction of complex systems is a challenging problem due to the sub-system interactions and dependencies. This research examines combining various computational intelligence algorithms and modeling techniques to provide insights into these complex processes and allow for better decision making. This hybrid methodology provided additional capabilities to analyze and predict the overall system behavior where a single model cannot be used to understand the complex problem. The systems analyzed here are flooding events and fetal health care. The impact of floods on road infrastructure is investigated using graph theory, agent-based traffic simulation, and Long Short-Term Memory deep learning to …

Mesh Networking And Full-Duplex Communication For Wireless Networks, Arul Mathi Maran Chandran

Doctoral Dissertations

“Connectivity with large coverage area; and an increase in spectral efficiency of communications are highly desired features for any wireless network. The presented research work addresses these two feature improvements. First, the work analyzed mesh networks to enhance connectivity for wireless networks. The work analyzed both homogeneous and heterogeneous mesh networks. The work includes the development of an Android application to enable smartphones with multiple interfaces, such as Wi-Fi, Bluetooth, and cellular services, to become convergence devices. These convergence devices are then used to build a heterogeneous mesh network improving connectivity and coverage area. Second, the work explored full-duplex communications, …

An Integrated Wellbore Stability Study To Mitigate Expensive Wellbore Instability Problems While Drilling Into Zubair Shale/Sand Sequence, Southern Iraq, Ahmed Khudhair Abbas

Doctoral Dissertations

”The Zubair Formation is the most prolific reservoir in Iraq, which is comprised of sandstones interbedded with shale sequences. Due to the weak nature of the shale sequence, the instability of a wellbore is one of the most critical challenges that continuously appears during drilling across this formation. Historically, over 90% of wellbore problems in the Zubair Formation were due to wellbore instability. Problems associated with wellbore instability, such as tight hole, shale caving, stuck logging tools along with subsequent fishing, stuck pipe, and sidetracking result in increasing the non-productive time. This non-productive time has cost an enormous amount of …

Studies On The Stability Of Plasma Proteins And Their Fragments, Paul Praveen Nakka

Doctoral Dissertations

“The stability of a protein-based biological drug is an important concern during processing, storage or patient administration. There are various forces which contribute to the stabilizing of proteins. Both hydrogen bonds and hydrophobic interactions play an important role in protein stability. Improper folding or misfolding of proteins leads to aggregation, which is a major problem found in the bioprocessing industry. The objectives of this research are: 1) to determine the effect of environmental factors such as pH, temperature, additives or salts, and cosolvents on the stability human serum albumin (HAS), which is the most abundant protein in plasma, 2) to …

A Framework For A Successful Additive Repair System, Todd E. Sparks

Doctoral Dissertations

“The goal of this research is to generate a revolutionary improvement to the usability and usefulness of additive repair technology by integrating a set of tools into a seamless work flow. Insufficient automation in the current repair process is a huge hurdle in achieving cost-effective, reliable repairs. Many opportunities have been missed due to inconsistency, quality issues and lack of robustness and flexibility. The present work addresses deficiencies in preparatory steps such as 2D and 3D geometry processing, parameter estimation, and path planning as well as on-machine execution of the path plan. The bulk of the effort is focused on …

Accurate Modeling Techniques For Power Delivery, Jingdong Sun

Doctoral Dissertations

“Power delivery is essential in electronic systems to provide reliable power from voltage sources to load devices. Driven by the ambitious user demands and technology evolutions, the power delivery design is posed serious challenges. In this work, we focus on modeling two types of power delivery paths: the power distribution network (PDN) and the wireless power transfer (WPT) system.

For the modeling of PDN, a novel pattern-based analytical method is proposed for PCB-level PDN impedance calculations, which constructs an equivalent circuit with one-to-one correspondences to the PCB’s physical structure. A practical modeling methodology is also introduced to optimize the PDN …

Advanced Control Methods On Three-Phase Inverters In Distributed Energy Resources, Sara Yazdani

Doctoral Dissertations

“This research is an endeavor to apply new and well-established control methodologies to improve transient response, stability and reliability of three-phase inverters in grid-connected and isolated mode of operation. In the course of studying the effect of these methodologies, model-based control is introduced and is extensively applied which is relatively a new approach. In addition, the application of this concept has been studied on developing “grid-forming” controls to allow wind and solar inverters to support voltage and frequency levels like traditional generators.

This research encloses the details of three major works of this research and their possible contributions on improving …

Human Behavior Understanding For Worker-Centered Intelligent Manufacturing, Wenjin Tao

Doctoral Dissertations

“In a worker-centered intelligent manufacturing system, sensing and understanding of the worker’s behavior are the primary tasks, which are essential for automatic performance evaluation & optimization, intelligent training & assistance, and human-robot collaboration. In this study, a worker-centered training & assistant system is proposed for intelligent manufacturing, which is featured with self-awareness and active-guidance. To understand the hand behavior, a method is proposed for complex hand gesture recognition using Convolutional Neural Networks (CNN) with multiview augmentation and inference fusion, from depth images captured by Microsoft Kinect. To sense and understand the worker in a more comprehensive way, a multi-modal approach …

Magnetic Control Of Transport Of Particles And Droplets In Low Reynolds Number Shear Flows, Jie Zhang

Doctoral Dissertations

“Magnetic particles and droplets have been used in a wide range applications including biomedicine, biological analysis and chemical reaction. The manipulation of magnetic microparticles or microdroplets in microscale fluid environments is one of the most critical processes in the systems and platforms based on microfluidic technology. The conventional methods are based on magnetic forces to manipulate magnetic particles or droplets in a viscous fluid.

In contrast to conventional magnetic separation method, several recent experimental and theoretical studies have demonstrated a different way to manipulate magnetic non-spherical particles by using a uniform magnetic field in the microchannel. However, the fundamental mechanism …

Integrated Approach To Investigate The Wellbore Integrity Under Downhole Conditions, Weicheng Zhang

Doctoral Dissertations

“The integrity of the cement sheath is the key part to maintain zonal isolation and prevent the inter-zonal communication. Loads arising from multiple stages of wellbore life span may induce various modes of cement failure within the cement (disking and radial cracks) and at the cement-casing and the cement-formation interfaces (debonding fractures). This research utilizes the integrated laboratory and numerical approach to investigate the cement hardening process, to predict the cement failure under various loading conditions. An innovative experimental setup is established to measure the cement pore pressure variation during the hardening process under downhole conditions, and a staged 3D …

Combustion And Emission Characteristics Of Ic Engines Fueled By Hydrogen And Hydrogen/Diesel Mixtures And Multi-Objective Optimization Of Operating Parameters, Abdulhakim Issa Jabbr

Doctoral Dissertations

“The present study considers combustion of hydrogen in IC engines. In general, the work focuses on simulating the engine performance and emissions at different operation parameters, and using optimization techniques. Task I work deals with the engine performance and emissions of a single cylinder spark-ignition (SI) engine fueled by hydrogen. The engine was simulated at different equivalence ratios, exhaust gas recirculation (EGR) and ignition timing. The results indicate that NOx emissions, engine power, and efficiency are reduced by increasing EGR level, and increased with increasing equivalence ratio and advanced ignition timing. The best operating conditions for hydrogen engines were obtained …

Development Of A System Architecture For The Prediction Of Student Success Using Machine Learning Techniques, Tatiana A. Cardona

Doctoral Dissertations

“ The goals of higher education have evolved through time based on the impact that technology development and industry have on productivity. Nowadays, jobs demand increased technical skills, and the supply of prepared personnel to assume those jobs is insufficient. The system of higher education needs to evaluate their practices to realize the potential of cultivating an educated and technically skilled workforce. Currently, completion rates at universities are too low to accomplish the aim of closing the workforce gap. Recent reports indicate that 40 percent of freshman at four-year public colleges will not graduate, and rates of completion are even …

Applications Of Information Theory In Filtering And Sensor Management, Matthew James Gualdoni

Doctoral Dissertations

“A classical sensor tasking methodology is analyzed in the context of generating sensor schedules for monitoring resident space objects (RSOs). This approach, namely maximizing the expected Kullback-Leibler divergence in a measurement update, is evaluated from a probabilistic perspective to determine the accuracy of the conventional approach. In this investigation, a newdivergence-based approach is proposed to circumvent themyopic nature of the measure, forecasting the potential information contribution to a time of interest and leveraging the system dynamics and measurement model to do so. The forecasted objective exploits properties of a batch measurement update to frequently exhibit faster optimization times when compared …

Bond Behavior Of Advanced Fiber Reinforced Composite-Concrete Joints, Xingxing Zou

Doctoral Dissertations

“Externally bonding advanced composite materials to concrete structures is an effective way to improve their strength, ductility, and durability. The interfacial bond behavior is fundamental to understand the overall structural performance of concrete structures strengthened with advanced composite materials. This study includes a comprehensive investigation of the bond behavior of composite-concrete joints with different fiber reinforced composite types. First, a direct approach to determine the bond-slip relationship for fiber reinforced cementitious matrix (FRCM)-concrete joints based on fiber strain measurements was proposed. Then, an analytical solution to predict the full-range response of FRCM-concrete joints was derived by assuming a trilinear bond-slip …

Geo-Engineered Induced Seismicity And The Effects On Federal Infrastructure, Merissa L. Zuzulock

Doctoral Dissertations

“The study of human-induced seismicity and the effects on civil engineering systems are not completely understood or often studied. Moreover, existing studies are focused on the cause of the seismicity and not on the potential damage to infrastructure from these seismic events. There are recent studies that are beginning to focus on shallow induced seismic activity and the effects on infrastructure by establishing innovative ways to quantify that damage. These studies that focus on the potential damage neglect to included considerations for small magnitude cluster events. As geo-induced seismic events increase, soil fatigue becomes of greater concern to structures within …

An Approach To System Of Systems Resiliency Using Architecture And Agent-Based Behavioral Modeling, Paulette Bootz Acheson

Doctoral Dissertations

”In today’s world it is no longer a question of whether a system will be compromised but when the system will be compromised. Consider the recent compromise of the Democratic National Committee (DNC) and Hillary Clinton emails as well as the multiple Yahoo breaches and the break into the Target customer database. The list of exploited vulnerabilities and successful cyber-attacks goes on and on. Because of the amount and frequency of the cyber-attacks, resiliency has taken on a whole new meaning. There is a new perspective within defense to consider resiliency in terms of Mission Success.

This research develops a …

Development Of A Modeling Algorithm To Predict Lean Implementation Success, Richard Charles Barclay

Doctoral Dissertations

”Lean has become a common term and goal in organizations throughout the world. The approach of eliminating waste and continuous improvement may seem simple on the surface but can be more complex when it comes to implementation. Some firms implement lean with great success, getting complete organizational buy-in and realizing the efficiencies foundational to lean. Other organizations struggle to implement lean. Never able to get the buy-in or traction needed to really institute the sort of cultural change that is often needed to implement change. It would be beneficial to have a tool that organizations could use to assess their …

Enabling Flexibility Through Strategic Management Of Complex Engineering Systems, Walter Louis Barnes Ii

Doctoral Dissertations

”Flexibility is a highly desired attribute of many systems operating in changing or uncertain conditions. It is a common theme in complex systems to identify where flexibility is generated within a system and how to model the processes needed to maintain and sustain flexibility. The key research question that is addressed is: how do we create a new definition of workforce flexibility within a human-technology-artificial intelligence environment?

Workforce flexibility is the management of organizational labor capacities and capabilities in operational environments using a broad and diffuse set of tools and approaches to mitigate system imbalances caused by uncertainties or changes. …

Modification Of The Optical Response Of Alpha Quartz Via The Deposition Of Gold Nanoparticles In Etched Ion Tracks, Maria C. Garcia Toro

Doctoral Dissertations

”This study addresses the experimental methods used to develop and characterize plasmonic devices capable of modifying the optical response of alpha quartz via the deposition of gold nanoparticles in etched ion tracks. In the first part of the research, the microstructural characterization of latent and etched ion tracks produced in alpha quartz (α-SiO₂) is presented. Single crystals of α-SiO₂ were irradiated with two highly energetic ions to different nominal fluences. As expected, the morphology of the resulting ion tracks depends on the energy of the incident ion and their stopping powers within the target material. Subsequent chemical …

Removal Of Non-Metallic Inclusions From Molten Steel By Ceramic Foam Filtration, Soumava Chakraborty

Doctoral Dissertations

”Ceramic filters are routinely used in steel foundries to remove non-metallic inclusions from steel melt. Removal efficiency for both solid and liquid inclusions by magnesia-stabilized zirconia foam filters (10ppi) were evaluated and distribution of the captured inclusions through the filter thickness was also investigated. A mold design was developed using a commercial computational fluid dynamics software package to produce two castings that fill simultaneously, one with a filter and the other without a filter, from a single ladle pour, while also matching the fill rates and avoid turbulence and reoxidation during pouring. An industrial-scale experiment was also performed to investigate …

The Development Of A Project Typology And Selection Tool To Improve Decision-Making In Sustainable Projects, Rakan Alyamani

Doctoral Dissertations

"Decision-making in sustainable projects is a complex and challenging process, especially during the initiating and planning phases of project development, due to influence from several external factors, as well as the uncertain environments surrounding their creation. It is essential to improve the decision-making process in sustainable projects during these two phases by relying on strong decision-making tools. The first contribution in this work identifies gaps in the literature of how institutionalization can impact sustainable projects through the effects of institutional isomorphisms from institutional theory. This helps decision makers better understand the relationship between institutionalization and sustainable projects. The second contribution …

Studying The Effects Of Various Process Parameters On Early Age Hydration Of Single- And Multi-Phase Cementitious Systems, Rachel Cook

Doctoral Dissertations

”The hydration of multi-phase ordinary Portland cement (OPC) and its pure phase derivatives, such as tricalcium silicate (C₃S) and belite (ß-C₂S), are studied in the context varying process parameters -- for instance, variable water content, water activity, superplasticizer structure and dose, and mineral additive type and particle size. These parameters are studied by means of physical experiments and numerical/computational techniques, such as: thermodynamic estimations; numerical kinetic-based modelling; and artificial intelligence techniques like machine learning (ML) models. In the past decade, numerical kinetic modeling has greatly improved in terms of fitting experimental, isothermal calorimetry to kinetic-based modelling …

Modeling And Optimization Of Froth Flotation Of Low-Grade Phosphate Ores: Experiments And Machine Learning, Ashraf Alsafasfeh

Doctoral Dissertations

”In this research work, bench-scale and micro-scale flotation tests were conducted to separate “minerals from silicate minerals using direct and reverse flotation approaches, respectively. Experiments were conducted at different flotation conditions including reagents’ type, reagents’ dosages, pulp’s pH, and flotation time.

In the direct flotation process, two polymers were selected to promote the depression of silicates: hybrid polyacrylamide-based polymers (Hy-PAM) and chitosan. Results indicated that the highest recovery of P₂O₅ (86.82%) was obtained when the Hy-PAM polymer was used compared with 66.7% and 40% when chitosan and commercial inorganic depressant were used, respectively. The experimental datasets obtained …

Critical Success Factors And Risk Mitigation Strategy For New Product Development, Rodney A. Ewing

Doctoral Dissertations

”Success in new product development (NPD) offers a competitive and comparative advantage in the marketplace. A primary objective in an NPD project is to launch world class products with minimal risk. To deliver the superior quality and performance customers require, a company must develop the right NPD structure and framework for seamless execution by the NPD project teams throughout the product lifecycle. Companies must understand how to identify and mitigate risk to enable the success of their NPD projects. The costs to develop new products are often a considerable portion of an organization’s budget; however, studies have shown only 60 …

Process Intensification Of Fuel Synthesis And Electrolysis, Jeremy Lee Hartvigsen

Doctoral Dissertations

”As more renewable energy is added to the electric grid, energy storage becomes a high priority. Suggestions have been made for energy storage in the form of fuel and chemicals. Currently, Solid Oxide Electrolysis systems can operate in endothermic mode and reduce the electrical requirement by supplying heat. Fuel synthesis from syngas is exothermic and can supply heat. However, the temperature mismatch in the normal operation of the electrolysis step and fuel synthesis step makes the direct utilization of this heat impossible. This work explores possibilities of alternate arrangements of coupling electrochemical systems and chemical synthesis. This work also explores …

Predictive Geohazard Mapping Using Lidar And Satellite Imagery In Missouri And Oklahoma, Usa, Olufeyisayo B. Ososami

Doctoral Dissertations

”Light Detection and Ranging (LiDAR) and satellite imagery have become the most utilized remote sensing technologies for compiling inventories of surficial geologic conditions. Point cloud data obtained from multi-spectral remote sensing methods provide a detailed characterization of the surface features, in particular, the detailed surface manifestations of underlying geologic structures. When combined, point clouds eliminate bias from visual inconsistencies and/or statistical values. This research explores the competence of point clouds derived from LiDAR and Unmanned Aerial Systems (UAS) as a predictive tool in evaluating various geohazards. It combines these data sets with other remote sensing techniques to evaluate the sensitivity …

Strategies To Improve The Electrochemical Performance Of Lithium-Ion Batteries By Stabilizing The Interface Of Electrode/Electrolyte, Ye Jin

Doctoral Dissertations

”Lithium-ion batteries (LIBs) provide great potential for electric vehicles, and smart grids as future energy-storage devices. However, there are many challenges in the development of the LIB industry, including low energy and power density of electrode materials, poor rate performance, short cycle life of electrode materials, and safety issues caused by the flammability of the conventional organic liquid electrolytes.

In this research, we were committed to using general approach to efficiently and economically synthesize or modify LIB materials by stabilizing the interface between electrode and electrolyte. Atomic layer deposition (ALD) method was used to coat metal oxide thin films on …

Development Of Lightweight Materials By Meso- And Microstructure Control, Myranda Shea Spratt

Doctoral Dissertations

”In this work, two lightweight structures – lattice structures and metal matrix syntactic foams (MMSF) – were studied. Honeycomb lattices were manufactured by powder bed selective laser melting (SLM) from 304L stainless steel. The wall thicknesses of these structures ranged from 0.2 to 0.5 mm. Surface roughness was the primary cause of dimensional mismatch between the expected and as-built structures with an average wall thickness increase of 0.12 mm. The strength of the honeycombs increased with increasing wall thickness. A feature of the SLM microstructure, the melt pool boundary, was also studied as a part of this work. 3D models …

Improved Attenuation And Crosstalk Modeling Techniques For High-Speed Channels, Shaohui Yong

Doctoral Dissertations

”As digital systems are moving in the direction of faster data transmission rate and higher density of circuits, the problem of the far-end crosstalk (FEXT) and frequency-dependent attenuation are becoming the major factors that limit signal integrity performance. This research is focusing on providing several more comprehensive and accurate modeling approaches for striplines on fabricated printed circuit board (PCB). By characterizing the dielectric permittivity of prepreg and core, dielectric loss tangent, and copper foil surface roughness using measurement data, a better agreement between the stripline model and measurement is achieved. First, a method is proposed to extract dielectric loss tangent …

Fabrication Of Micro-/Nanofluidic Models And Their Applications For Enhanced Oil Recovery Mechanism Study, Yandong Zhang

Doctoral Dissertations

”Micro-/nanofluidic model, as a potential powerful tool, has been used for decades for investigating fluid flow at pore-scale in energy field. It is still increasingly imperative nowadays to use different micromodels to direct observe pore-level fluid flow and analyze mechanisms of different enhanced oil recovery methods. In this work, three main tasks including three dimensional micromodels (1D,2D,3D) are proposed to fabricate and use for investigating different mechanisms of different enhanced oil recovery methods. For 1D capillary tube micromodel, we fabricate and use it to investigate the dynamics of a trapped oil droplet under seismic vibration. Seismic stimulation is a promising …