Engineering Commons^™

Optimization Of Process Parameters And Fermentation Strategy For Xylanase Production In A Stirred Tank Reactor Using A Mutant Aspergillus Nidulans Strain, Asmaa Abdella, Fernando Segato, Mark R. Wilkins

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The present work studied the optimization of aeration rate, agitation rate and oxygen transfer and the use of various batch fermentation strategies for xylanase production from a recombinant Aspergillus nidulans strain in a 3 L stirred tank reactor. Maximum xylanase production of 1250 U/mL with productivity of 313 U/mL/day was obtained under an aeration rate of 2 vvm and an agitation rate of 400 rpm using batch fermentation. The optimum volumetric oxygen transfer coefficient (kLa) for efficient xylanase production was found to be 38.6 h1. Fed batch mode and repeated batch fermentation was also performed with kLa was 38.6 h1. …

Antibiotic Resistance Gene Profile Changes In Cropland Soil After Manure Application And Rainfall, Morgan Meyers, Lisa Durso, John E. Gilley, Heidi Waldrip, Lana Castleberry, Amy Millmier Schmidt

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Land application of manure introduces gastrointestinal microbes into the environment, including bacteria carrying antibiotic resistance genes (ARGs). Measuring soil ARGs is important for active stewardship efforts to minimize gene flow from agricultural production systems; however, the variety of sampling protocols and target genes makes it difficult to compare ARG results between studies. We used polymerase chain reaction (PCR) methods to characterize and/or quantify 27 ARG targets in soils from 20 replicate, long-term no-till plots, before and after swine manure application and simulated rainfall and runoff. All samples were negative for the 10 b-lactamase genes assayed. For tetracycline resistance, only source …

Optimization Of Process Parameters And Fermentation Strategy For Xylanase Production In A Stirred Tank Reactor Using A Mutant Aspergillus Nidulans Strain, Asmaa Abdella, Fernando Segato, Mark R. Wilkins

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The present work studied the optimization of aeration rate, agitation rate and oxygen transfer and the use of various batch fermentation strategies for xylanase production from a recombinant Aspergillus nidulans strain in a 3 L stirred tank reactor. Maximum xylanase production of 1250 U/mL with productivity of 313 U/mL/day was obtained under an aeration rate of 2 vvm and an agitation rate of 400 rpm using batch fermentation. The optimum volumetric oxygen transfer coefficient (kLa) for efficient xylanase production was found to be 38.6 h-1. Fed batch mode and repeated batch fermentation was also performed with kLa was 38.6 h …

System For Optimizing Fed-Batch Hydrolysis Of Biomass, Chao Tai, Deepak R. Keshwani

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Provided herein is a system for optimizing the fed-batch hydrolysis of biomass.

System And Method For Monitoring Pleural Fluid, Dimitrios Miserlis, Kim Cluff, Abby M. Kelly, Suzanne J. Higgins, Max H. Twedt

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The disclosure is directed to intrapleural air leak detection and monitoring. According to various embodiments of the disclosure, an air leak may be detected utilizing at least one sensor to determine whether fluid extracted from a pleural cavity of a patient includes carbon dioxide and/or a second substance. The second substance may be a foreign substance inhaled by the patient to confirm presence of the air leak. The air leak may be further monitored over a period of time by collecting temporally successive measurements associated with detected concentrations of carbon dioxide. Therefore, tissue damage and recovery may be assessed according …

Hydrogen Peroxide Sensors For Biomedical Applications, Jakob Meier, Eric M. Hofferber, Joseph A. Stapleton, Nicole M. Iverson

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Hydrogen peroxide (H2O2) is an important molecule within the human body, but many of its roles in physiology and pathophysiology are not well understood. To better understand the importance of H2O2 in biological systems, it is essential that researchers are able to quantify this reactive species in various settings, including in vitro, ex vivo and in vivo systems. This review covers a broad range of H2O2 sensors that have been used in biological systems, highlighting advancements that have taken place since 2015.

Grain Yield, Crop And Basal Evapotranspiration, Production Functions And Water Productivity Response Of Drought-Tolerant And Non-Drought-Tolerant Maize Hybrids Under Different Irrigation Levels, And Population Densities: Part I. In Western Nebraska's Semi-Arid Environments, Ali T. Mohammed, Suat Irmak, William Kranz, Simon Van Donk, C. Dean Yonts

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Grain yield, crop evapotranspiration (ETc), basal evapotranspiration (ETb), ETc-yield production functions (ETYPF), and crop water use efficiency (CWUE) response of three drought-tolerant (DT) and one non-drought-tolerant (NDT) maize (Zea mays L.) hybrids to two plant population densities (PPDs) [84,000 plants ha-1 (high PPD) and 59,300 plants ha-1 (low PPD)] and three irrigation levels were researched at two semi-arid locations: North Platte (WCREC) and Scottsbluff (MAL), Nebraska, in 2010, 2011, and 2012. The irrigation levels were fully irrigated (FIT), early cutoff (ECOT), and rainfed (RFT). Precipitation in 2010 was above average, 2011 was a normal year, and 2012 was one of …

Damage Assessment Of A Sixteen Story Building Following The 2017 Central Mexico Earthquake, Yijun Liao, Richard L. Wood, M Ebrahim Mohammadi, Kanchan Devkota, Christine E. Wittich

Department of Civil and Environmental Engineering: Faculty Publications

The 2017 M7.1 Central Mexico Earthquake caused significant infrastructural damage in the Mexico City area. The earthquake contained a significant pulse in the long period, resulting in numerous buildings severely damaged or collapsed. This paper discusses a reinforced concrete building which was still partially occupied post-earthquake. The building’s interior walls were examined to have substantial damage, including some extensive cracking. In January 2018, the authors visited the structure and collected detailed assessment data. The data collection included ground-based lidar scans and recorded ambient vibrations of the damaged structure using accelerometers. Eleven scans were collected from the four exterior facades to …

Degradation Of Methylene Blue With Magnetic Co-Doped Fe3O4@Feooh Nanocomposites As Heterogeneous Catalysts Of Peroxymonosulfate, Kai Wang, Yi Yang, Tian C. Zhang, Ying Liang, Qingguo Wang

Department of Civil and Environmental Engineering: Faculty Publications

Magnetic Co-doped Fe₃O₄@FeOOH nanocomposites were prepared in one step using the hydrothermal synthesis process for catalyzing peroxymonosulfate (PMS) to degrade refractory methylene blue (MB) at a wide pH range (3.0–10.0). The catalysts' physiochemical properties were characterized by different equipment; Fe³⁺/Fe²⁺ and Co³⁺/Co²⁺ were confirmed to coexist in the nanocomposite by X-ray photoelectron spectroscopy. The nanocomposite effectively catalyzed PMS's decoloration (99.2%) and mineralization (64.7%) of MB. The formation of Co/Fe–OH complexes at the surface of nanoparticles was proposed to facilitate heterogeneous PMS activation. Compared with the observation for Fe₃O …

The Effect Of Piezo-Bumps On Energy Generation And Reduction Of The Global Carbon Emissions, Rania Rushdy Moussa

Architectural Engineering

Nowadays, renewable energy sources are taking high place in research agenda. In the last centuries, human activities are overloading the environment and the atmosphere with pollutant and carbon emissions which affect negatively the climate and produce global problems such as ozone depletion and global warming. Electricity could be considered as the most contributor part in these climate problems, the production of electricity overloads the environment by carbon emissions. Moreover, the production of domestic oil and natural gas are decreasing every day and relying on these type of Energy sources is no longer an option. Developing and implementing renewable energy approach …

Investigation On Utilizing Garbage As A Resource For A Sustainable Neighbourhood: Case Study Of A Neighbourhood In New Cairo, Egypt, Marianne N. Guirguis, Rania Rushdy Moussa

Architectural Engineering

Waste management comprises the actions required for managing waste material produced from human activities from its source of origin to its final removal. Usually, it collects resources from all forms of matter such as gaseous, liquid, solid, and radioactive. This action is made to avoid the negative effects of wastes on the environment and human wellbeing. The effect of accumulating waste may be highly severe for numerous communities in developing countries such as Egypt. Egyptian neighbourhoods suffer from effects of accumulating local wastes and garbage. Public health and the visual image of the neighbourhoods, in addition to the different social, …

Piezoelectric Tiles Is A Sustainable Approach For Designing Interior Spaces And Creating Self- Sustain Projects., Madonna M. Solban, Rania Rushdy Moussa

Architectural Engineering

These days, the third worlds countries such as Egypt are facing a hug challenge toward energy production. Energy crisis is the most critical issue facing these developing countries. In the recent couple of years Egypt has experienced a serious shortage in the power supply which affect negatively the industry sector as well as the residential sector due to the shortage of natural gas production and fossil fuel which prevented the government from providing the basic needs of Energy to the community. Moreover, it affects negatively the developing of this country and building a new mega projects. Renewable energy sources can …

Novel Adsorbent For Industrial Wastewater Treatment Applications, Islam M. Al-Akraa, Ahmed Y. Zakaria Eng, Dalia A. Ali Eng, Hany A. Elazab Dr, Hoda A. Elsawy Dr

Chemical Engineering

In this study, the hydroxyapatite powder is investigated for both of methylene blue and thymol blue in aqueous solution. The physical and chemical properties of the adsorbent were evaluated systematically using the different techniques including Microsoft Excel programming, linear regression model and also the coefficient of determination. Batch adsorption experiments were conducted to determine the effect of contact time, solution pH, initial dye concentrations, and also the adsorbent dosage on adsorption. The adsorption kinetic parameters confirmed the better fitting of pseudo-second order kinetic model for both of methylene blue and thymol blue. The isotherm data of methylene blue and thymol …

Detection Of Offensive Youtube Comments, A Performance Comparison Of Deep Learning Approaches, Priyam Bansal

Dissertations

Social media data is open, free and available in massive quantities. However, there is a significant limitation in making sense of this data because of its high volume, variety, uncertain veracity, velocity, value and variability. This work provides a comprehensive framework of text processing and analysis performed on YouTube comments having offensive and non-offensive contents.

YouTube is a platform where every age group of people logs in and finds the type of content that most appeals to them. Apart from this, a massive increase in the use of offensive language has been apparent. As there are massive volume of new …

Phase Resolved Partial Discharge Evaluation At Dc Voltage, Tobias Dezenzo

Doctoral

Partial discharge diagnostics are common for the condition assessment of high voltage alternating current (ac) and direct current (dc) equipment. For ac applications the phase resolved partial discharge evaluation method has prevailed [1]. Even though, numerous methods for dc partial discharge diagnostics have been proposed no agreed standard exists. This is primarily because of the fact that these methods are not as easily applicable as the well-known, intuitive, pattern based phase resolved method. Due to the often assumed unavailability of a useable phase angle information [2]–[4] this method has never been transferred to dc partial discharge diagnostics. However, as a …

Modeled And Measured Ecosystem Respiration In Maize–Soybean Systems Over 10 Years, Ming Zhan, Adam Liska, Anthony Nguy-Robertson, Andrew E. Suyker, Matthew P. Pelton, Haishun Yang

Adam Liska Papers

Crop residue is an abundant resource for the potential production of biofuels, but a better understanding of its use on net carbon emissions must be developed to mitigate climate change. This analysis combines two established crop growth models (Hybrid-Maize and SoySim) with a simple soil and crop residue respiration model to estimate daily ecosystem respiration (ERe) from maize and soybean; ERe was estimated to be the sum of CO₂ emissions from the oxidation of the growing crop, crop residue, and soil organic carbon (SOC). Model-estimated CO₂ fluxes from irrigated continuous maize and irrigated maize–soybean cropping systems in eastern …

The Small Rna Teg41 Regulates Expression Of The Alpha Phenol-Soluble Modulins And Is Required For Virulence In Staphylococcus Aureus, Rachel L. Zapf, Richard E. Wiemels, Rebecca A. Keogh, Donald L. Holzschu, Kayla M. Howell, Emily Trzeciak, Andrew R. Caillet, Kellie A. King, Samantha A. Selhorst, Michael J. Naldrett, Jeffrey L. Bose, Ronan K. Carroll

Nebraska Center for Biotechnology: Faculty and Staff Publications

Small RNAs (sRNAs) remain an understudied class of regulatory molecules in bacteria in general and in Gram-positive bacteria in particular. In the major human pathogen Staphylococcus aureus, hundreds of sRNAs have been identified; however, only a few have been characterized in detail. In this study, we investigate the role of the sRNA Teg41 in S. aureus virulence. We demonstrate that Teg41, an sRNA divergently transcribed from the locus that encodes the cytolytic alpha phenolsoluble modulin (αPSM) peptides, plays a critical role in αPSM production. Overproduction of Teg41 leads to an increase in αPSM levels and a corresponding increase in …

Delineating The Role Of Fanca In Glucose-Stimulated Insulin Secretion In Β Cells Through Its Protein Interactome, Dragana Lagundzin, Wen-Feng Hu, Henry C. H. Law, Kimiko L. Krieger, Fangfang Qiao, Emalie J. Clement, Andjela T. Drincic, Olgica Nedic, Michael J. Naldrett, Sophie Alvarez, Nicholas T. Woods

Nebraska Center for Biotechnology: Faculty and Staff Publications

Hyperinsulinemia affects 72% of Fanconi anemia (FA) patients and an additional 25% experience lowered glucose tolerance or frank diabetes. The underlying molecular mechanisms contributing to the dysfunction of FA pancreas β cells is unknown. Therefore, we sought to evaluate the functional role of FANCA, the most commonly mutated gene in FA, in glucosestimulated insulin secretion (GSIS). This study reveals that FANCA or FANCB knockdown impairs GSIS in human pancreas β cell line EndoC-βH3. To identify potential pathways by which FANCA might regulate GSIS, we employed a proteomics approach to identify FANCA protein interactions in EndoC-βH3 differentially regulated in response to …

Big Data Investment And Knowledge Integration In Academic Libraries, Saher Manaseer, Afnan R. Alawneh, Dua Asoudi

Copyright, Fair Use, Scholarly Communication, etc.

Recently, big data investment has become important for organizations, especially with the fast growth of data following the huge expansion in the usage of social media applications, and websites. Many organizations depend on extracting and reaching the needed reports and statistics. As the investments on big data and its storage have become major challenges for organizations, many technologies and methods have been developed to tackle those challenges.

One of such technologies is Hadoop, a framework that is used to divide big data into packages and distribute those packages through nodes to be processed, consuming less cost than the traditional storage …

Mechanical Characterizations Of 3d-Printed Plla/Steel Particle Composites, Hozhabr Mozafari, Pengfei Dong, Haitham Hadidi, Michael P. Sealy, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

The objective of this study is to characterize the micromechanical properties of poly-L-lactic acid (PLLA) composites reinforced by grade 420 stainless steel (SS) particles with a specific focus on the interphase properties. The specimens were manufactured using 3D printing techniques due to its many benefits, including high accuracy, cost effectiveness and customized geometry. The adopted fused filament fabrication resulted in a thin interphase layer with an average thickness of 3 μm. The mechanical properties of each phase, as well as the interphase, were characterized by nanoindentation tests. The effect of matrix degradation, i.e., imperfect bonding, on the elastic modulus of …

Hemodynamic Interference Of Serial Stenoses And Its Impact On Ffr And Ifr Measurements, Siyeong Ju, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

The hemodynamic interference of serial stenoses poses challenges for identifying the functional severity using the fractional flow reserve (FFR) method. The instantaneous wave-free ratio (iFR), i.e., the distal-to-proximal pressure ratio at 75% of diastole, was recently proposed to overcome the disadvantages of the FFR. However, the underlying mechanism remained ambiguous due to the lack of quantitative definition of hemodynamic interference. The objective of this study is to quantitatively define the hemodynamic interference and then examine its role on the FFR and iFR measurements. Pressure distributions, velocity fields, and Q-criterion which identifies vortices, were obtained through the computational fluid dynamics (CFD) …

Hemodynamics And Wall Mechanics After Surgical Repair Of Aortic Arch: Implication For Better Clinical Decisions, Siyeong Ju, Ibrahim Abdullah, Shengmao Lin, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

Graft repair of aortic coarctation is commonly used to mimic the physiological aortic arch shape and function. Various graft materials and shapes have been adopted for the surgery. The goal of this work is to quantitatively assess the impact of graft materials and shapes in the hemodynamics and wall mechanics of the restored aortic arch and its correlation with clinical outcomes. A three-dimensional aortic arch model was reconstructed from magnetic resonance images. The fluid–structure interaction (FSI) analysis was performed to characterize the hemodynamics and solid wall mechanics of the repaired aortic arch. Two graft shapes (i.e., a half-moon shape and …

Interface Facilitated Reorientation Of Mg Nanolayers In Mg-Nb Nanolaminates, Y. Chen, Mingyu Gong, N. A. Mara, Jian Wang

Department of Mechanical and Materials Engineering: Faculty Publications

Mg/Nb nanolaminates synthesized through vapor deposition techniques exhibit high flow strength without conventional twinning in Mg. In this work, we investigated the influence of laminated microstructures on deformation mechanisms of Mg nanolayers. Using molecular dynamics simulations, we explored that (0001)-oriented Mg layers transform or re-orient to {10¯10}-oriented Mg layers through nucleation and growth of {10¯12} twins by atomic shuffling, instead of conventional {10¯12} twinning shear. Such a reorientation accommodates in-plane compressive strain and out-of-plane tensile strain when Mg/Nb laminates are subjected to compression parallel to the Mg/Nb interfaces. The nucleation of {10¯12} twins is promoted at the Mg/Nb interface due …

Predictive Peridynamic 3d Models Of Pitting Corrosion In Stainless Steel With Formation Of Lacy Covers, Siavash Jafarzadeh, Florin Bobaru, Ziguang Chen

Department of Mechanical and Materials Engineering: Faculty Publications

In this work, the peridynamic corrosion model is used for 3D simulation of pitting corrosion in stainless steel. Models for passivation and salt layer formation are employed to predict detailed characteristics of pit growth kinetic in stainless steels, such as lacy cover formation on top of the pit, and the diffusion-controlled regime at the pit bottom. The model is validated against an experimentally grown pit on 316L stainless steel in NaCl solution. Lacy covers in this model are formed autonomously during the simulation process. They are remarkably similar to the covers observed on top of the real pits.

Predictive Peridynamic 3d Models Of Pitting Corrosion In Stainless Steel With Formation Of Lacy Covers, Siavash Jafarzadeh, Florin Bobaru, Ziguang Chen

Department of Mechanical and Materials Engineering: Faculty Publications

In this work, the peridynamic corrosion model is used for 3D simulation of pitting corrosion in stainless steel. Models for passivation and salt layer formation are employed to predict detailed characteristics of pit growth kinetic in stainless steels, such as lacy cover formation on top of the pit, and the diffusion-controlled regime at the pit bottom. The model is validated against an experimentally grown pit on 316L stainless steel in NaCl solution. Lacy covers in this model are formed autonomously during the simulation process. They are remarkably similar to the covers observed on top of the real pits.

Propagating, Evanescent, And Complex Wavenumber Guided Waves In High-Performance Composites, Victor Giurgiutiu, Mohammad Faisal Haider

Faculty Publications

The study of propagating, evanescent and complex wavenumbers of guided waves (GWs) in high-performance composites using a stable and robust semi-analytical finite element (SAFE) method is presented. To facilitate understanding of the wavenumber trajectories, an incremental material change study is performed moving gradually from isotropic aluminum alloy to carbon fiber reinforced polymer (CFRP) composites. The SAFE results for an isotropic aluminum alloy plate are compared with the exact analytical solutions, which shows that N = 20 SAFE elements across the thickness provides <0.5% error in the highest evanescent wavenumber for the given frequency-wavenumber range. The material change study reveals that reducing the transverse and shear moduli moves the wavenumber solution towards one similar to composite material. The comparison of the propagating, evanescent and complex wavenumber trajectories between composites and aluminum alloy show that antisymmetric imaginary Lamb wave modes always exist in composites although they may not exist in isotropic aluminum alloy at some frequencies. The wavenumber trajectories for a unidirectional CFRP plate show that the range of real wavenumber is much smaller than in the isotropic aluminum alloy. For laminated CFRP composite plates (e.g., unidirectional, off-axis, transverse, cross-ply and quasi-isotropic laminates), the quasi Lamb wave and shear horizontal (SH) wave trajectories are also identified and discussed. The imaginary SH wave trajectories in laminated composites are distorted due to the presence of ±45 plies. The convergence study of the SAFE method in various CFRP laminates indicates that sufficient accuracy can always be achieved by increasing the number of SAFE elements. Future work will address the stress-continuity between composite layers.

The Legacy Project: Rodney L. Custer, Dte, Rodney L. Custer Dte, Johnny J. Moye Dte

STEMPS Faculty Publications

An interview with vice president of Dept. of Technical Education, Rodney Custer is presented. Topics discussed include interest in technology and engineering education; academic qualification; and experience as university department chair administrator and working with the Center for Math, Science, and Technology (CeMast).

Motivation In Transition: Development And Roles Of Expectancy, Task Values, And Costs In Early College Engineering, Kristy A. Robinson, You-Kyung Lee, Emily A. Bovee, Tony Perez, S. Patrick Wilson, Daina Briedis, Lisa Linnenbrink-Garcia

STEMPS Faculty Publications

This longitudinal study investigated development in expectancy for success (perceived competence), 3 types of task value (utility, interest, attainment), and 3 types of perceived cost (opportunity, effort, psychological) for engineering students during their first 2 years of college. Latent growth curve models indicated declines in expectancy and values, with attainment value declining more slowly than expectancy, interest value, and utility value. Costs increased over time, with effort cost increasing more rapidly than psychological cost. Demographic differences were observed in initial levels of motivation, but not in rates of change over time. Students with slower declines in expectancy and value and …

Spatial Fingerprinting Of Biogenic And Anthropogenic Volatile Organic Compounds In An Arid Unsaturated Zone, Christopher T. Green, Wentai Luo, Christopher H. Conaway, Karl B. Haase, Ronald J. Baker

Chemistry Faculty Publications and Presentations

Subsurface volatile organic compounds (VOCs) can pose risks to human and environmental health and mediate biological processes. Volatile organic compounds have both anthropogenic and biogenic origins, but the relative importance of these sources has not been explored in subsurface environments. This study synthesized 17 yr of VOC data from the Amargosa Desert Research Site in Nevada with the goal of improving understanding of spatial and temporal variations that distinguish sources of VOCs from a landfill and from ambient sources including biogenic VOCs (bVOCs). Gas samples were collected from 1999 to 2016 from an array of shallow sample points (0.5- and …

Toward Improving Ambient Volta Potential Measurements With Skpfm For Corrosion Studies, Corey M. Efaw, Thiago Da Silva, Paul H. Davis, Lan Li, Elton Graugnard, Michael F. Hurley

Materials Science and Engineering Faculty Publications and Presentations

Scanning Kelvin probe force microscopy (SKPFM) is used in corrosion studies to quantify the relative nobility of different microstructural features present within complex metallic systems and thereby elucidate possible corrosion initiation sites. However, Volta potential differences (VPDs) measured via SKPFM in the literature for metal alloys exhibit large variability, making interpretation and application for corrosion studies difficult. We have developed an improved method for referencing SKPFM VPDs by quantifying the closely related work function of the probe relative to an inert gold standard whose modified work function is calculated via density functional theory (DFT). By measuring and tracking changes in …