Engineering Commons^™

Saw Correlator Temperature Compensation Using A Pulse Width Modulated Temperature Controller, Daniel Betancourt

Electronic Theses and Dissertations

A Surface Acoustic Wave (SAW) correlator built on a Lithium Niobate substrate is temperature compensated in order to maintain a constant center frequency. Frequency shifts as a result of temperature variations limit device performance. An Arduino®-based PWM temperature controller is developed to read the device temperature from a resistance temperature detector located on the SAW wafer and to regulate its temperature to a specified setpoint by providing current to a heater which is co-located with the temperature sensor on the SAW correlator substrate. The final temperature controller achieves frequency shifts of 0.013 MHz from room temperature with a worst-case PPM …

Machine Learning And Neural Networks For Real-Time Scheduling, Daniel Hureira, Christian Vartanian

Recent Advances in Real-Time Systems

This paper aims to serve as an efficient survey of the processes, problems, and methodologies surrounding the use of Neural Networks, specifically Hopfield-Type, in order to solve Hard-Real-Time Scheduling problems. Our primary goal is to demystify the field of Neural Networks research and properly describe the methods in which Real-Time scheduling problems may be approached when using neural networks. Furthermore, to give an introduction of sorts on this niche topic in a niche field. This survey is derived from four main papers, namely: “A Neurodynamic Approach for Real-Time Scheduling via Maximizing Piecewise Linear Utility” and “Scheduling Multiprocessor Job with Resource …

Experiment And Computational Analysis On Effect Of Plasma Actuation Incompressible Flow Around Tandem Cylinders, Emmanuel C. Gabriel-Ohanu

Honors Undergraduate Theses

The utilization of steady state flow of air over tandem circular cylinders has several applications in engineering systems. Incompressible flow over circular cylinders in tandem at different spacing with and without plasma actuation on the leading cylinder will be investigated in this paper to understand the effects of plasma actuation on flow properties and wake region of the two cylinders in cross flow. The principal focus of the research is on the use of experimental and computational methods to study and provide valid results, the research will analyze the wake region, the effect of Reynolds number and the longitudinal spacing …

Comparative Nutrient Removal With Innovative Green Soprtion Media For Groundwater And Stormwater Co-Treatment, Dan Wen

Electronic Theses and Dissertations

As indicated by the National Academy of Engineering, the understanding of nitrogen cycle has been deemed as one of 14 grand challenges in engineering of the 21st century. Due to rapid population growth and urbanization, the stormwater runoff increased in quantity as well as its nutrient concentrations, which may trigger serious environmental issues such as eutrophication in aquatic systems and ecosystem degradation. This study focuses on stormwater and groundwater quality control via Biosorption Activated Media (BAM) which can be applied to enhance the nutrient removal potential as an emerging Best Management Practices (BMPs). BAM was tested in this study with …

Developing A Traffic Safety Diagnostics System For Unmanned Aerial Vehicles Usingdeep Learning Algorithms, Ou Zheng

Electronic Theses and Dissertations

This thesis presents an automated traffic safety diagnostics solution using deep learning techniques to process traffic videos by Unmanned Aerial Vehicle (UAV). Mask R-CNN is employed to better detect vehicles in UAV videos after video stabilization. The vehicle trajectories are generated when tracking the detected vehicle by Channel and Spatial Reliability Tracking (CSRT) algorithm. During the detection process, missing vehicles could be tracked by the process of identifying stopped vehicles and comparing Intersect of Union (IOU) between the tracking results and the detection results. In addition, rotated bounding rectangles based on the pixel-to- pixel manner masks that are generated by …

Investigation Of Computer Vision Concepts And Methods For Structural Health Monitoring And Identification Applications, Chuanzhi Dong

Electronic Theses and Dissertations

This study presents a comprehensive investigation of methods and technologies for developing a computer vision-based framework for Structural Health Monitoring (SHM) and Structural Identification (St-Id) for civil infrastructure systems, with particular emphasis on various types of bridges. SHM is implemented on various structures over the last two decades, yet, there are some issues such as considerable cost, field implementation time and excessive labor needs for the instrumentation of sensors, cable wiring work and possible interruptions during implementation. These issues make it only viable when major investments for SHM are warranted for decision making. For other cases, there needs to be …

Procedure To Measure The Penetration Of One Mechanical Filter For Nanoparticles: Validation By Comparison, Pooya Abdolghader, Clothilde Brochot, Fariborz Haghighat, Ali Bahloul

Études primaires

Nanoparticles (NPs) are particles of less than or equal to 100 nm in diameter. Due to their size, they have a significant effect on health and safety of people. Capture of these NPs in general ventilation systems by filters remains one of the most widely used means of protection due to its relative simplicity of implementation and its effectiveness for capturing various size of particles. In North America, filters used in general ventilation systems are tested by the ANSI/ASHRAE Standard 52.2 and are graded according to their efficiency, which is a function of particle diameter. However, the current standard limits …

Development Of Multicomponent Eam Potential For Ni-Based Superalloy, Muztoba Rabbani

Graduate Theses/Dissertations

We initiated the development of multi-component EAM potentials for Aluminides and Carbides, key phases in Ni-based Superalloys. The goal is to utilize the MD simulation to understand the deformation dynamics that contribute to the formation of voids and creep initiation. For this purpose, we constructed the raw data from ab-initio (molecular dynamics) MD simulations fed into the potential development code and used Nickel as the base metal with the addition of a number of various elements including Aluminum, Chromium, Tungsten. We then developed the EAM potentials for the aluminide and carbide phases using the force-fitting code MEAMfit. Our generated potential …

Secure Networked Control Via Software Rejuvenation, Paul Griffioen, Raffaele Romagnoli, Bruce H. Krogh, Bruno Sinopoli

Faculty Work Comprehensive List

Software rejuvenation has been proposed as a prevention mechanism against unanticipated and undetectable attacks on cyber-physical systems. Without needing to implement any detection algorithm, the system is periodically refreshed with a secure and trusted copy of the control software to eliminate any malicious modifications to the run-time code and data that may have corrupted the controller. Previous work has considered using software rejuvenation while being able to disconnect from the network when recovering from dangerous situations. In contrast, we consider using software rejuvenation in cases where a network connection is needed in order for proper recovery to occur. We present …

Technological Cooperation Network In Biotechnology Analysis Of Patents With Brazil As The Priority Country, Cristiano Goncalves Pereira, Rodrigo Ribeiro Da Silva, Joao Ricardo Lavoie, Geciane Silveira Porto

Engineering and Technology Management Faculty Publications and Presentations

Purpose – The establishment of partnerships between companies, government and universities aims to enhance innovation and the technological development of institutions. The biotechnology sector has grown in recent years mainly driven by its cooperative business model. Compared to other countries, this sector is slowly advancing in Brazil, with delays in science, technology and innovation, especially in the private sector. This paper aims to examine, through social network analysis, the collaborative networks between institutions that filed patents in biotechnology – medicinal preparations from plants – whose inventions had Brazil as the priority country. Design/methodology/approach – The study of technological cooperation using …

A Preliminary Strategic Framework For Enhancing The Sustainability Of International Technology Transfer: The Case Of Libya, Rafaa Ibrahim Khalifa, Maoloud Dabab, Husam Barham

Engineering and Technology Management Faculty Publications and Presentations

International Technology Transfer (ITT) has played a crucial role not only in the industrial growth of developing countries but also in enhancing the competitiveness of their enterprises in the global market. Libya is a North African country that is currently shifting from a strictly petroleum/mineral based economy to a broad-based economy competing with distinct advantages through selecting, planning, and adopting the right technology for the domestic market. This significant transition requires strategic access to global technology transfer. In this paper, a preliminary strategic framework is designed to enhance the sustainability of the ITT process from international donators to the Country …

Cybersecurity Planning For Artificial Intelligent Systems In Space, Gary Langford, Lucas Beaulieu, Jeffery Carpenter, Ian Watkins, Brock Marsh, Teah Heidorn, Chris Chase

Engineering and Technology Management Faculty Publications and Presentations

CubeSats continue to proliferate and are an excellent low-cost method of remote sensing. A key piece of intelligent systems is sensory input, data storage, and data communications. With the continued miniaturization of technology, CubeSats will increase their sensory inputs with future miniaturization and enhance their robustness for autonomous operations if data and communications are secure. These futures inspire an intelligent system solution to on-orbit communications. This paper explores a dual-microprocessor approach to improve hardware cybersecurity of intelligent systems, with a view toward intensional intelligence as a means of adjudicating access to sensitive data onboard the CubeSat. With enhanced cybersecurity, Artificial …

Capital Efficiency For Development Stage Biotech-Based Firms: An Ipo Perspective, Mark J. Ahn, Amir Shaygan

Engineering and Technology Management Faculty Publications and Presentations

Access to multiple tranches of capital is critical for predominantly no revenue development stage biotech firms. While financing needs are monotonically increasing over multiple years in the product development approval cycle, the market for high risk, milestone driven biotech investment is significantly more volatile than the financial markets as a whole. In this paper, we analyzed the role and relative importance of global biotech IPOs, as well as other sources of capital such as strategic alliances, for research and development funding. We also explored and assessed the degree of mismatch between the access to capital, operational efficiencies, and how firms …

Analyzing The Effects Of Attitude Errors When Quantifying The On-Orbit Performance Of A Cubesat Micropropulsion System, Andrew Orion Watson

Masters Theses

"CubeSats and small satellites have become popular methods of performing space research. Accordingly, interest has also grown in designing micropropulsion systems to increase the lifespan of these satellites. This work describes the framework for analyzing the effects of imperfect attitude determination and control when quantifying the on-orbit performance of a micropropulsion system. The Gauss variation of parameters equations were implemented to model the orbital mechanics, with perturbing models for the zonal harmonics, atmospheric drag, and solar radiation pressure included. Two common sources for imperfections in a spacecraft's attitude were considered. The first was to consider the effect of the spacecraft …

Field Testing And Simulation Of Vadose-Zone Recharge Wells In The Mississippi River Valley Alluvial Aquifer As An Artificial Recharge Method, Kyungwon Kwak

Electronic Theses and Dissertations

Increasing concerns regarding depletion of groundwater in the Delta region of Mississippi have led to a need to augment natural recharge. Infiltration basins are often one of the simplest means of artificially recharging aquifers. However the Delta has a layer of clay and silt at the surface so it is a better idea to use vadose-zone recharge wells that are not limited by the surficial layer of fine soils. The purpose of this study is to use full-scale field testing to assess the feasibility of using vadose-zone wells for artificial recharge of the Mississippi River Valley alluvial aquifer by using …

Beyond 2020 Nextgen Compliance: Human Factors And Cognitive Loading Issues For Commercial And General Aviation Pilots, Mark D. Miller, Sam Holley

Publications

As previously identified by the authors, digitized flight decks have realigned SHELL model components and introduced cognitive overload con­cerns. Considering changes from implementing Next Generation air traffic management requirements in 2020, the authors assess digitized interfaces associated with cockpit displays of information integral to performance based navigation and similar operations. Focus is placed on Automatic Dependent Surveillance Broadcast, digitized communications, and expanded electronic flight bags. The ADSB (In) cockpit display will enable pilots to have flight visual awareness on aircraft, terrain, weather and hazards to flight through live satellite updates every second. Increased optical demands and cognitive loading are anticipated …

A Change In The Dark Room: The Effects Of Human Factors And Cognitive Loading Issues For Nextgen Tracon Air Traffic Controllers, Mark D. Miller, Sam Holley, Bettina Mrusek, Linda Weiland

Publications

By 2020 all aircraft in United States airspace must use ADS-B (Automatic Dependent Surveillance-Broadcast) Out. This is a key component of the Next Generation (NextGen) Air Transportation System, which marks the first time all aircraft will be tracked continuously using satellites instead of ground-based radar. Standard Terminal Automation Replacement System (STARS) in the Terminal Radar Approach Control (TRACON) is a primary NextGen upgrade where digitized automation/information surrounds STARS controllers while controlling aircraft. Applying the SHELL model, the authors analyze human factors changes affecting TRACON controllers from pre-STARS technology through NextGen technologies on performance. Results of an informal survey of STARS …

Modelling Of Aerodynamic Process For Coal Waste Dump Located In Geodynamically Dangerous Zone, Elena Vishnevskaya, Alexander Kobylkin, Valeriya Musina, Andrian Batugin, Vladimir Ponomarev, Oksana Vorobyeva

Publications

Previously made evaluations show confinement of fire coal waste dumps to geodynamically dangerous zones which in this work are considered as borders of active blocks of the earth crust. According to the hypothesis under development, when disposing the dumps in geodynamically dangerous zones (GDZ), which have a high penetrating, aerodynamic relation of the dumps with the environment occurs, making the dumps firing possible. Firing of the dumps inflicts environmental, social and material damage. This research is aimed to study possible mechanism of gas mass transfer through GDZ into the body of dump on the base of computer modeling of aerodynamic …

Artificial Intelligence In The Aviation Manufacturing Process For Complex Assemblies And Components, Elena Vishnevskaya, Ian Mcandrew, Michael Johnson

Publications

Aviation manufacturing is at the leading edge of technology with materials, designs and processes where automation is not only integral; but complex systems require more advanced systems to produce and verify processes. Critical Infrastructure theory is now used to protect systems and equipment from external software infections and cybersecurity techniques add an extra layer of protection. In this research, it is argued that Artificial Intelligence can reduce these risks and allow complex processes to be less exposed to the threat of external problems, internal errors or mistakes in operation.

Test 2216: Kubota M7-172, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2214: Kubota M7-132, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Safety Culture, Training, Understanding, Aviation Passion: The Impact On Manual Flight And Operational Performance, Karlene Kassner Petitt

Doctoral Dissertations and Master's Theses

The objective of this study was to understand pilots’ proclivity toward automation usage by identifying the relationship among pilot training, aircraft and systems understanding, safety culture, manual flight behavior, and aviation passion. A survey instrument titled Manual Flight Inventory (MFI) was designed to gather and assess self-reported variables of manual flight behavior, aviation passion, safety culture perception, pilot training, and pilot understanding. Demographic data and automation opinion-based questions were also asked to fully understand pilots’ thoughts on automation, safety culture, policies, procedures, training methodologies and assessment measures, levels of understanding, and study techniques. Exploratory Factor Analysis (EFA) was utilized to …

Selective Word Encoding For Effective Text Representation, Savaş Özkan, Akin Özkan

Turkish Journal of Electrical Engineering and Computer Sciences

Determining the category of a text document from its semantic content is highly motivated in the literature and it has been extensively studied in various applications. Also, the compact representation of the text is a fundamental step in achieving precise results for the applications and the studies are generously concentrated to improve its performance. In particular, the studies which exploit the aggregation of word-level representations are the mainstream techniques used in the problem. In this paper, we tackle text representation to achieve high performance in different text classification tasks. Throughout the paper, three critical contributions are presented. First, to encode …

Management Strategy Evaluation: Transdisciplinary And Transparent Natural Resource Management, Eileen Hofmann, Lisa Maddison, Ingrid Van Putten

CCPO Publications

Management Strategy Evaluation (MSE) is a modelling tool used to evaluate sufficiently realistic simulations of potential policy choices in complex systems. As a contribution to the Integrated Marine Biosphere Research (IMBeR) project IMBIZO V, which occurred in October 2017, a workshop was convened with the goal of developing a coherent understanding of best-practice approaches for MSEs. MSEs are becoming standard approaches to characterizing risk across fisheries management organizations globally. MSEs are important tools that aid in delineating objectives, costs, and constraints that define risk and provide a possible mechanism to meet assessment challenges. The MSE workshop considered case studies drawn …

Optimal Power Flow Control Of Networked Dc Microgrids, Eddy H. Trinklein

Dissertations, Master's Theses and Master's Reports

The US military is moving toward the electrification of many weapon systems and platforms. Advanced weapon systems such as high energy radar, electro-magnetic kinetic weapons and directed energy pose significant integration challenges due to their pulsed power electrical load profile. Additionally, the weapons platforms, including ships, aircraft, and vehicles can be studied as a mobile microgrids with multiple generation sources, loads, and energy storage. There is also a desire to extend the mission profile and capabilities of these systems. Common goals are to increase fuel efficiency, maintaining system stability, and reduce energy storage size as typically required to enable pulsed …

Upright Sleep Device For Patients Required To Sleep Upright Post Surgery/Medical Procedure, Kristin J. Abele, Madeleine H. Hummel, Tayler R. Kastlunger

Biomedical Engineering

No abstract provided.

Surf Leg, Samantha Campbell, Oyundari Altansukh, Caroline Swanson, Kurtis Barth

Mechanical Engineering

The Surf Leg Prosthetic project team in conjunction with QL+ and Operation Surf designed a transtibial prosthetic to be used for surfing. The senior project team focused on the missions of QL+ and Operation Surf as they went through the design process during the 2018-2019 academic year. The problem solved was that a standard prosthetic for a transtibial amputee does not provide the flexibility in enough degrees of freedom for a user to squat and balance on a surfboard. The goal of this project was to create a device specifically designed to improve the user’s balance and control while surfing. …

Investigation Of Dredge Material Dewatering Through Hydraulic And Ground Improvement Methods, Monica Moody

Williams Honors College, Honors Research Projects

Every year almost 1.5 million tons of material is dredged from Lake Erie to allow passage for boat traffic. In the past, this material has been placed back into the open waters of the lake. However, starting July 2020 this will no long be permitted due to the passing of Senate Bill 1. Therefore, secondary uses of this dredging material are being investigated. To be used, the material needs to be quickly dewatered and stabilized. This project consists of literary reviews of two methods of rapid dewatering, hydraulic placement and ground improvement methods. Hydraulic placement dewatering requires the use of …

Effect Of Moisture Condition On Concrete Core Strengths, Wally Heyen, Lieska Halsey

Nebraska Department of Transportation: Research Reports

The main purpose of this study was to determine if there would be any major differences between curing methods of cores taken for acceptance testing from a highway slab on a project. The comparison provided data to determine the effect of the moisture gradients created by these different curing treatments on core strength and core permeability. The strengths were measured of moist cured cores and sealed plastic bag cured cores from the day cores were obtained (14, 21 and 26 days) until they reached 28 days. Permeability was also measured at 26, 28 and 32 days. According to ASTM C42, …

Investigating The Interaction Of Ndot Hot-Pour Pcc Joint Sealant And Penetrating Concrete Sealers, Bruce Barrett, Dale Byre, Wally Heyen, Lieska Halsey, David Hansen

Nebraska Department of Transportation: Research Reports

Based on the field observations on NE-83, PCS potentially impacts the bond between the concrete and hot-pour sealant after application. If penetrating sealers break the interfacial bond after application, concrete pavements could become compromised and subject to freeze-thaw damage, chloride attack, and other deleterious effects.

The results show that discoloration occurred when applying the five PCS products to the NE-3405 hot-pour sealed testing blocks. All three test methods of application; spraying, 1-min, and 5-min soaks, caused discoloration. The level of discoloration increased with the duration of contact with the PCS. Despite discoloration, none of the five PCS products caused de-bonding …