Engineering Commons^™

Detection Of Ddh In Infants And Children Using Audible Acoustics, Tanvir Hassan

Electronic Theses and Dissertations

Detection of developmental dysplasia of the hip (DDH) in infants and children is important as it leads to permanent hip instability. Current methods for detecting DDH, such as ultrasound and x-rays, are relatively expensive and need qualified medical personnel to administer the test. Furthermore, x-ray ionizing radiation can have potential harmful effects. In the current study, an acoustic non-invasive and simple approach was investigated for detection of DDH. Different benchtop simplified models and pig models were constructed and tested. Models were stimulated with band-limited white acoustic noise (10-2500 Hz) and the response of the models was measured. The power spectrum …

Basic Turbo Roundabouts As An Alternative To Conventional Double-Lane Roundabouts: Operational Performance Evaluation, Zuhair Elhassy

Electronic Theses and Dissertations

Conventional roundabouts have been prevalent worldwide since the emergence of modern roundabouts in 1966. An innovative design of multilane roundabouts known as turbo roundabouts, however, has been recently introduced as an alternative to conventional multilane roundabouts. Due to several reasons, there has been no general consensus on the operational performance of turbo roundabouts throughout the world. Nationwide, turbo roundabouts have yet to be part of roadway systems, but there is an ongoing project expected to be finished in early 2020. Therefore, this dissertation aims to evaluate the operational performance of a widespread variant of turbo roundabouts, namely basic turbo roundabouts, …

Fundamental Properties Of Metallic Nanolasers, William Hayenga

Electronic Theses and Dissertations

The last two decades have witnessed tremendous advancements in the area of nanophotonics and plasmonics, which has helped propel the development of integrated photonic sources. Of central importance to such circuits is compact, scalable, low threshold, and efficient coherent sources that can be driven at high modulation frequencies. In this regard, metallic nanolasers offer a unique platform. Their introduction has enabled confinement of light at a subwavelength scale and the ultra-small size of the modes afforded by these structures allows for cavity enhancing effects that can help facilitate thresholdless lasing and large direct modulation bandwidths. In this report, I present …

Processing Of Advanced Infrared Materials, Daniel Mcgill

Electronic Theses and Dissertations

Infrared transparent glassy and crystalline materials often have unique and complex processing requirements but are an important class of materials for such applications as optical windows, lenses, waveplates, polarizers and beam splitters. This thesis investigates two specific materials, one amorphous and one crystalline, that are candidates for use in the short and midwave-infrared and mid and longwave infrared, respectively. It is demonstrated that an innovative uniaxial sintering process, which uses a sacrificial pressure-transmitting medium, can be used to fully densify a 70TeO2-20WO3-10La2O3 (TWL) glass powder. The characteristics of the sintered TWL glass is compared to that of a parent glass …

Scaffolding Project-Based Learning In An Engineering And Education Partnership Using Open-Access Technology, Pilar Pazos, Stacie I. Ringleb, Jennifer Kidd, Rachel Jones

Engineering Management & Systems Engineering Faculty Publications

This paper describes the use of a freely-accessible open-source platform based on Google Apps for Education that combines Google Sites, Google Docs, Google Drive, Google Hangouts and script language in a custom-based interface that supports collaborative service-learning projects for teams of Engineering and Education students. The approach discussed in this paper was successful in promoting collaboration among students from two different disciplines working remotely. The analysis suggests that balanced participation in the team, presence of shared goals and clear roles that emphasized individual and collective responsibilities were key to a successful interdisciplinary project experience. While many students still reported struggling …

Journal Of The Arkansas Academy Of Science - Volume 73, 2019, Academy Editors

Journal of the Arkansas Academy of Science

No abstract provided.

Moore’S Law And Space Exploration: New Insights And Next Steps, Michael Howell, Venkat Kodali, Richard Segall, Hyacinthe Aboudja, Daniel Berleant

Journal of the Arkansas Academy of Science

Understanding how technology changes over time is important for industry, science, and government policy. Empirical examination of the capability of technologies across various domains reveals that they often progress at an exponential rate. In addition, mathematical models of technological development have proven successful in deepening our understanding. One area that has not been shown to demonstrate exponential trends, until recently, has been space travel.

This paper will present plots illustrating trends in the mean lifespan of satellites whose lifespans ended in a given year. Our study identifies both Wright’s law and Moore’s law regressions. For the Moore’s law regression, we …

Keynote Address And Meeting Program, Academy Editors

Journal of the Arkansas Academy of Science

No abstract provided.

Instructions To Authors, Academy Editors

Journal of the Arkansas Academy of Science

No abstract provided.

Development Of A Novel Ultrasound/Photoacoustic Tomography System For Breast Cancer Imaging Using Full-Ring Illumination Mode, Suhail Salem Alshahrani

Wayne State University Dissertations

Breast cancer is a significant health problem, not only in the United States but globally. In the last year, breast cancer was the second leading cause of cancer deaths in the United States. In addition, the incidence rates of invasive and in situ female breast cancer increased in all age classes between 1975 and 2014. Early detection is a critical component in effectively managing this disease. One of the challenges of early detection of breast cancer lies in the availability and accuracy of diagnostic imaging. Several modalities for early detection are currently available and in use. One of the most …

Spectral Methods For Hamiltonian Systems And Their Applications, Lewei Zhao

Wayne State University Dissertations

Hamiltonian systems typically arise as models of conservative physical systems and have many applications. Our main emphasis is using spectral methods to preserve both symplectic structure and energy up to machine error in long time. An engery error estimation is given for a type of Hamiltonian systems with polynomial nonlinear part, which is numerical verified by solving a Henon-Heiles systems. Three interesting applications are presented : the first one is the N-body problems. The second one is approximation for Weyl's Law and the third one is simulating quantum cooling in an optomechanical system to study the dissipative dynamics. Moreover, nonsmooth …

Inventory Of Hazardous Materials Shipments Moving Into Fayette County, Kentucky, Candice Y. Wallace, Bryan Gibson, Steven Douglas Kreis

Kentucky Transportation Center Research Report

Each day, significant quantities of hazardous materials are transported through Fayette County. The bulk of the materials pass through without incident, but some vehicles carrying them are involved in roadway incidents and/or accidents. However, first responders and management personnel lack clear knowledge of what hazardous material commodities are on central Kentucky’s roads. This project was designed to provide a high level analysis of hazardous material commodity flows in Fayette County.

Bigger Tides, Less Flooding: Effects Of Dredging On Barotropic Dynamics In A Highly Modified Estuary, David K. Ralston, Stefan Talke, W. Rockwell Geyer, Hussein A. M. Al-Zubaidi, Christopher K. Sommerfield

Civil and Environmental Engineering Faculty Publications and Presentations

Since the late nineteenth century, channel depths have more than doubled in parts of New York Harbor and the tidal Hudson River, wetlands have been reclaimed and navigational channels widened, and river flow has been regulated. To quantify the effects of these modifications, observations and numerical simulations using historical and modern bathymetry are used to analyze changes in the barotropic dynamics. Model results and water level records for Albany (1868 to present) and New York Harbor (1844 to present) recovered from archives show that the tidal amplitude has more than doubled near the head of tides, whereas increases in the …

Evaluation Of Shared Space To Reduce Traffic Congestion, Kimley Frosch, David Martinelli, Avinash Unnikrishnan

Civil and Environmental Engineering Faculty Publications and Presentations

Pedestrian and vehicle interactions often lead to conflicts that bring about safety, traffic congestion, and priority or right of way issues. Common methods used in the past to combat said issues have largely relied on the principle of separating the motions of pedestrians and vehicles by means of bridges, tunnels, signals, and access restrictions. A different approach known as shared space aims to solve the same problems with a less structured and defined environment which instead places more reliance on human interaction and perception. Although it has been used in multiple scenarios across Europe with success, instances of shared spaces …

The Tides They Are A-Changin’: A Comprehensive Review Of Past And Future Nonastronomical Changes In Tides, Their Driving Mechanisms And Future Implications, Ivan D. Haigh, Mark D. Pickering, J.A. Mattias Green, Brian K. Arbic, Arne Arns, Soenke Dangendorf, David Hill, David A. Jay, Multiple Additional Authors

Civil and Environmental Engineering Faculty Publications and Presentations

Scientists and engineers have observed for some time that tidal amplitudes at many locations are shifting considerably due to non-astronomical factors. Here we review comprehensively these important changes in tidal properties, many of which remain poorly understood. Over long geological time-scales, tectonic processes drive variations in basin size, depth, and shape, and hence the resonant properties of ocean basins. On shorter geological time-scales, changes in oceanic tidal properties are dominated by variations in water depth. A growing number of studies have identified widespread, sometimes regionally-coherent, positive and negative trends in tidal constituents and levels during the 19th, 20th and early …

Investigate An Appropriate Spatial Resolution For Large-Scaled Pedestrian Travel Demand Model, Qin Zhang, Kelly Clifton, Rolf Moeckel

Civil and Environmental Engineering Faculty Publications and Presentations

An appropriate spatial resolution plays a significant role in any travel demand models. It directly impacts the level of detail of model input data, outcomes, and sensitivities (Castiglione et al., 2014; Moeckel and Donnelly, 2015). Compared to motorized or bicycle travel, pedestrian trips occur over a shorter travel distance and they are sensitive to environmental conditions at a much finer grain. Thus, it is important for models to set an appropriate spatial resolution to capture variations in walking conditions, leading to better representation of pedestrian demand over space (Gehrke and Clifton, 2014).

Observational Method And Coding Framework For Analyzing The Functionality Of Unprotected Bicycle Lanes, Cat Silva, Kelly Clifton, Rolf Moeckel

Civil and Environmental Engineering Faculty Publications and Presentations

This research evaluates how well unprotected bicycle lanes function as dedicated travel lanes for bicyclists. Two types of bicycle lanes are included in this study, including on-street bicycle lanes demarcated with painted lines on the vehicular roadway and bicycle lanes at-grade with, and immediately adjacent to, the pedestrian sidewalk. Specifically, the research is focused on how people behave and interact on street segments with these facilities in place. To assess how, and how well, these types of bicycle lanes function for the bicyclists using them, an observational method is deployed to record, document, and analyze people’s behavior and interactions. A …

Modelling And Simulation Of Renewable Technologies For Economic And Environmental Analysis And Optimization Of Dairy Farms, Michael Christopher Breen

Theses

The aim of this thesis was to develop a dairy optimisation platform to optimise investments in dairy farm technology and changes to on-farm management practices and electricity tariffs, in order to maximise profitability and minimise environmental impacts. Increased dairy herd sizes and milk production levels in Ireland as well as changing regulations concerning emissions, renewable penetration and energy efficiency have necessitated a means of financial decision support for farmers. Therefore this body of work focused on the creation of a comprehensive method for optimising dairy farm technology selection, management practices and electricity tariffs. The measures which could be implemented on …

Decarbonising The Automotive Industry: The Future For Irish Motorists., Robert Maher

Theses

This research study is an examination of the current state of the Irish automotive industry, which is being reshaped by the imminent shift to electric vehicles. This transition is designed to assist in solving Ireland's air quality and environmental challenges in line with the worldwide move to combat climate change. The research topic of the decarbonisation of the automotive industry determined the research question: "Decarbonising the Automotive Industry: The Future for Irish Motorists". This inquiry focuses on private cars owned for social, pleasure and domestic use. Secondary research was completed to verify the most prevalent and current existing information. A …

A Compact Single-Element Pattern Reconfigurable Antenna With Wide-Angle Scanning Tuned By A Single Varactor, Haozhan Tian, Lijun Jiang, Tatsuo Itoh

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, we propose a convenient fixed-frequency beam steering method, using a single patch antenna controlled by only one electronically tunable component. The antenna is based on coupled-mode patch antenna (CMPA) [1] that is capable to scan the beam as the function of frequency. A ground-etched slot loaded with one varactor diode is tuned to be capacitive, resonant, or inductive. In order to test broader tuning range, two kinds of varactors with the ranges of 9.24 pF-1.77 pF and 2.67 pF-0.63 pF are implemented respectively. By analyzing how the loaded slot affects the cavity modes and fields, we demonstrate …

Applying Deep Learning Approach To The Far-Field Subwavelength Imaging Based On Near-Field Resonant Metalens At Microwave Frequencies, He Ming Yao, Min Li, Lijun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, we utilize the deep learning approach for the subwavelength imaging in far-field, which is realized by the near-field resonant metalens at microwave frequencies. The resonating metalens consisting of split-ring resonators (SRRs) are equipped with the strong magnetic coupling ability and can convert evanescent waves into propagating waves using the localized resonant modes. The propagating waves in the far-field are utilized as the input of a trained deep convolutional neural network (CNN) to realize the imaging. The training data for establishing the deep CNN are obtained by the EM simulation tool. Besides, the white Gaussian noise is added …

Supply Chain Infrastructure Restoration Calculator Software Tool -- Developer Guide And User Manual, Akhilesh Ojha, Bhanu Kanwar, Suzanna Long, Thomas G. Shoberg, Steven Corns

Engineering Management and Systems Engineering Faculty Research & Creative Works

This report describes a software tool that calculates costs associated with the reconstruction of supply chain interdependent critical infrastructure in the advent of a catastrophic failure by either outside forces (extreme events) or internal forces (fatigue). This tool fills a gap between search and recover strategies of the Federal Emergency Management Agency (or FEMA) and construction techniques under full recovery. In addition to overall construction costs, the tool calculates reconstruction needs in terms of personnel and their required support. From these estimates, total costs (or the cost of each element to be restored) can be calculated. Estimates are based upon …

Machine-Learning-Based Pml For The Fdtd Method, He Ming Yao, Lijun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

In this letter, a novel absorbing boundary condition (ABC) computation method for finite-difference time-domain (FDTD) is proposed based on the machine learning approach. The hyperbolic tangent basis function (HTBF) neural network is introduced to replace traditional perfectly matched layer (PML) ABC during the FDTD solving process. The field data on the interface of conventional PML are employed to train HTBF-based PML model. Compared to the conventional approach, the novel method greatly decreases the size of a computation domain and the computation complexity of FDTD because the new model only involves the one-cell boundary layer. Numerical examples are provided to benchmark …

Understanding The Connection Between Blasting And Highwall Stability, Robert Quentin Eades, Kyle A. Perry

Mining Engineering Faculty Research & Creative Works

Surface mines continue to implement highwalls for several reasons, such as increasing recovery, improving margins, and justifying higher stripping ratios. Highwall stability is a complex issue that is dependent upon a variety of mining and geologic factors, and a safe design is necessary for a successful surface operation. To improve highwall stability, it is important to understand the connection between local geology and blasting. Explosives are employed throughout the mining industry for primary rock breakage. There are a number of controlled blasting techniques that can be implemented to improve highwall stability. These include line drilling, smooth wall blasting, trim blasting, …

Modeling And Study Of Thermal Effects On Battery Pack Using Phase Change Materials, Umang Selokar

Electronic Theses and Dissertations

The scope of the current research is to reduce the temperature distribution area in Li-ion cell and the battery pack with respect to time in battery design, using CFD technology (Computational Fluid Dynamics) in ANSYS fluent. A 3D model was design in CAD software (CATIA) and analyzed in ANSYS fluent to study the thermal behavior of the designed battery pack. An analytical thermal model was generated to evaluate the heat generation rate passing throughout the battery pack. The battery pack were analyzed and simulated on two different designs. One battery design is modeled with and without insulation (superwool EST compression …

A Study Of The Effect Of Heat Treatment On 3d Printed Pla Impact Strength, Suresh Thota

Electronic Theses and Dissertations

Environmental conditions have a significant effect on the mechanical properties of various materials. Environmental parameters such as temperature and humidity have a major impact on mechanical properties of materials such as compressive strength, tensile strength, bending strength and impact strength. The purpose of this research is to study how temperature and humidity affect the impact strength of 3D printed PLA plastic. Impact strength is the ability of a material to absorb energy subjected to an impact load by a pendulum. In this research, 3D printing was employed to produce PLA specimens which were later used for different experimental testings. For …

Classification Of North Africa For Use As An Extended Pseudo Invariant Calibration Sites (Epics) For Radiometric Calibration And Stability Monitoring Of Optical Satellite Sensors, Mahesh Shrestha

Electronic Theses and Dissertations

An increasing number of Earth-observing satellite sensors are being launched to meet the insatiable demand for timely and accurate data to help the understanding of the Earth’s complex systems and to monitor significant changes to them. The quality of data recorded by these sensors is a primary concern, as it critically depends on accurate radiometric calibration for each sensor. Pseudo Invariant Calibration Sites (PICS) have been extensively used for radiometric calibration and temporal stability monitoring of optical satellite sensors. Due to limited knowledge about the radiometric stability of North Africa, only a limited number of sites in the region are …

An Initial Exploration Of The 2005 Iowa Rural Interstate Speed Limit Increase Using Linear Regression, Thomas Ryan Cook

Electronic Theses and Dissertations

Speed limit increases, particularly on interstates have been studied and researched many times over the course of the last 50 years in the United States. These research efforts began after the implementation of the National Maximum Speed Law (NMSL), which reduced all speed limits to a maximum of 55-mph. In the years that followed, this restriction was relaxed to 65-mph with the Surface Transportation and Uniform Relocation Assistance Act (STURAA) and ultimately repealed later by the National Highway System Designation Act (NHSDA). Since the repeal, states reacted in myriad of ways and many studies documented the changes of those reactions. …

Machine Learning For Load Profile Data Analytics And Short-Term Load Forecasting, Md. Rashedul Haq

Electronic Theses and Dissertations

Short-term load forecasting (STLF) is a key issue for the operation and dispatch of day ahead energy market. It is a prerequisite for the economic operation of power systems and the basis of dispatching and making startup-shutdown plans, which plays a key role in the automatic control of power systems. Accurate power load forecasting not only help users choose a more appropriate electricity consumption scheme and reduces a lot of electric cost expenditure but also is conducive to optimizing the resources of power systems. This advantage helps while improving equipment utilization for reducing the production cost and improving the economic …

Methods For Earth-Observing Satellite Surface Reflectance Validation, Moe Talal Badawi

Electronic Theses and Dissertations

In this study an initial validation of the Landsat 8 (L8) Operational Land Imager (OLI) Surface Reflectance (SR) product was performed. The OLI SR product is derived from the L8 Top-of-Atmosphere product via the Landsat Surface Reflectance Code (LaSRC) software and generated by the U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center. The goal of this study is to develop and evaluate proper validation methodology for the OLI L2 SR product. Validation was performed using near-simultaneous ground truth SR measurements during Landsat 8 overpasses at 13 sites located in the U.S., Brazil, Chile and France. The ground …