Engineering Commons^™

Design And Optimization Of A High Power Density Silicon Carbide Traction Inverter, Tyler Adamson

Graduate Theses and Dissertations

This project was initiated with the goal of demonstrating a 3-phase silicon carbide based 150-kW 25 kW/L DC-AC power conversion unit capable of operation with coolant temperatures up to 90°C. The project goals were met and exceeded by first analyzing the established inverter topologies to find which one would yield the highest power density while still meeting electrical performance needs in the 150-kW range. Following topology selection, the smallest silicon carbide power module that met the electrical requirements of the system was found through experimental testing and simulation. After a power module selection was finalized, a DC link capacitor bank …

Theoretical Investigations Of The Electronic, Magnetic, And Thermoelectric Properties Of Transition-Metal Based Compounds, Haleoot Edaan Raad

Graduate Theses and Dissertations

The electronic, magnetic, and thermoelectric properties of transition-metal based compounds were investigated by using the density functional theory and Boltzmann transport formalism. It was found that the Co-based Heusler compounds and InSe monochalcogenide are among the materials that may be used for future thermoelectric devices. Furthermore, the investigation showed that the quaternary Heusler compounds, such as, CoFeYGe, where Y is Ti or Cr, are half-metallic ferromagnetic materials with full electron spin polarization. The lattice thermal conductivity (κL) was found to decrease for these alloys as the temperature increases. The present investigation indicated that the phonon optical modes have a major …

Exploring Convergence Of Snake Skin-Inspired Texture Designs And Additive Manufacturing For Mechanical Traction, Catherine Sue Tiner

Graduate Theses and Dissertations

This research focuses on the understanding, development, and additive manufacture of a 3D printed snake skin-inspired texture pattern. The design functionalities of snake skin were determined through the study of the snake species Python Regius otherwise known as the ball python. Each scale of a snake has hierarchical texture with hexagonal macro-patterns aligned on the ventral surface of the skin with overriding anisotropic micro textured patterns such as denticulations and fibrils. Using a laser-powder bed fusion (L-PBF) process, 420 stainless steel samples were 3D printed which closely resemble the above described directional texture of natural snake skin. This printed surface …

Quantitative Analysis Techniques For Assessing Organelle Organization And Dynamics In Individual Cells, Isaac Vargas

Graduate Theses and Dissertations

In biomedical optics and microscopy, the organization and morphology of organelles have been widely studied. In spite of novel imaging techniques, there is still a lack of quantitative tools to easily measure cellular characteristics from image data. Previous studies have explored multiple approaches to assess organelle organization and alignment, resulting in complicated and extensive algorithms that are both subject to multiple steps of image processing and influenced by non-cellular artifacts. In this thesis, a technique called the Modified Blanket Method (MBM) is introduced to quantify organelle organization through measurements of fractal dimension (FD) on a pixel-by-pixel basis. With the use …

Involuntary Signal-Based Grounding Of Civilian Unmanned Aerial Systems (Uas) In Civilian Airspace, Keith Conley

Master's Theses

This thesis investigates the involuntary signal-based grounding of civilian unmanned aerial systems (UAS) in unauthorized air spaces. The technique proposed here will forcibly land unauthorized UAS in a given area in such a way that the UAS will not be harmed, and the pilot cannot stop the landing. The technique will not involuntarily ground authorized drones which will be determined prior to the landing. Unauthorized airspaces include military bases, university campuses, areas affected by a natural disaster, and stadiums for public events. This thesis proposes an early prototype of a hardware-based signal based involuntary grounding technique to handle the problem …

Modification Of Optical And Structural Properties Of Dc Magnetron Sputtered Tungsten Oxide Thin Films For Electrochromic Application, P Yaemsanguansak, M Sittishoktram, R Tuayjaroen, E Ketsombun, T Lertvanithphol, C Luangchaisri, T Jutarosaga

Journal of Metals, Materials and Minerals

The optical properties of tungsten oxide thin films prepared by a reactive DC magnetron sputtering technique were investigated. The influences of O2 flow rates (15 and 18 sccm) and DC sputtering powers (5, 15 and 25 W) on the optical properties of 200 nm-thick tungsten oxide films on indium tin oxide substrates (WO3/ITO/glass) were investigated using UV-visible spectrophotometer. The results indicated that the transmission modulation in visible region between colored state and bleached state of the films increased significantly with decreasing DC sputtering power and increasing O2 flow rate. The results corresponded with the increase of film roughness and density …

Resource-Constrained Project Scheduling With Autonomous Learning Effects, Jordan M. Ticktin

Master's Theses

It's commonly assumed that experience leads to efficiency, yet this is largely unaccounted for in resource-constrained project scheduling. This thesis considers the idea that learning effects could allow selected activities to be completed within reduced time, if they're scheduled after activities where workers learn relevant skills. This paper computationally explores the effect of this autonomous, intra-project learning on optimal makespan and problem difficulty. A learning extension is proposed to the standard RCPSP scheduling problem. Multiple parameters are considered, including project size, learning frequency, and learning intensity. A test instance generator is developed to adapt the popular PSPLIB library of scheduling …

Performance Enhancement And Characterization Of An Electromagnetic Railgun, Paul M. Gilles

Master's Theses

Collision with orbital debris poses a serious threat to spacecraft and astronauts. Hypervelocity impacts resulting from collisions mean that objects with a mass less than 1g can cause mission-ending damage to spacecraft. A means of shielding spacecraft against collisions is necessary. A means of testing candidate shielding methods for their efficacy in mitigating hypervelocity impacts is therefore also necessary. Cal Poly’s Electromagnetic Railgun was designed with the goal of creating a laboratory system capable of simulating hypervelocity (≥ 3 km/s) impacts. Due to several factors, the system was not previously capable of high-velocity (≥ 1 km/s) tests. A deficient projectile …

Mitigating Pilot Contamination Through Optimizing Pilot Allocation In Massive Mimo Systems, Rand Abdul Hussain

Theses and Dissertations

This dissertation has proposed several algorithms to optimize the allocation of pilots to the users’ equipment (UEs) to mitigate the effect of the pilot contamination problem in the massive MIMO systems. Pilot contamination reduces the performance of massive MIMO systems due to the reduction in the quality of the estimated channel between a UE and the serving base station (BS). The limitation of the number of samples in a coherence block limits the number of unique mutually orthogonal pilots, and hence, reusing the set of pilots across the cells causes inter-cell interference during pilot transmission, which is called pilot contamination. …

Me-Em Enewsbrief, December 2019, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Energy-Performance Scalability Analysis Of A Novel Quasi-Stochastic Computing Approach, Prashanthi Metku, Ramu Seva, Minsu Choi

Electrical and Computer Engineering Faculty Research & Creative Works

Stochastic computing (SC) is an emerging low-cost computation paradigm for efficient approximation. It processes data in forms of probabilities and offers excellent progressive accuracy. Since SC's accuracy heavily depends on the stochastic bitstream length, generating acceptable approximate results while minimizing the bitstream length is one of the major challenges in SC, as energy consumption tends to linearly increase with bitstream length. To address this issue, a novel energy-performance scalable approach based on quasi-stochastic number generators is proposed and validated in this work. Compared to conventional approaches, the proposed methodology utilizes a novel algorithm to estimate the computation time based on …

Bayesian Optimization For High-Speed Channel Equalization, Zurab Kiguradze, Nana Dikhaminjia, Mikheil Tsiklauri, Jiayi He, Bhyrav Mutnury, Arun Chada, James Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

Equalization methods are used to recover the signal attenuated by channel loss. Different optimization algorithms are applied to find the best tap coefficients for each equalization that will improve eye opening and reduce bit error rate. The goal function for most equalization optimization algorithms is to reduce the difference between input and output signals, which is a linear optimization problem and can be solved relatively easily. This indirectly will increase eye height and improve eye diagram. Directly optimizing eye height is a non-linear problem and cannot be solved with analytical method. We are proposing FFE and DFE combined equalization optimization …

Pixel-Level Deep Multi-Dimensional Embeddings For Homogeneous Multiple Object Tracking, Mateusz Mittek

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The goal of Multiple Object Tracking (MOT) is to locate multiple objects and keep track of their individual identities and trajectories given a sequence of (video) frames. A popular approach to MOT is tracking by detection consisting of two processing components: detection (identification of objects of interest in individual frames) and data association (connecting data from multiple frames). This work addresses the detection component by introducing a method based on semantic instance segmentation, i.e., assigning labels to all visible pixels such that they are unique among different instances. Modern tracking methods often built around Convolutional Neural Networks (CNNs) and additional, …

Formal Modeling And Analysis Of A Family Of Surgical Robots, Niloofar Mansoor

School of Computing: Dissertations, Theses, and Student Research

Safety-critical applications often use dependability cases to validate that specified properties are invariant, or to demonstrate a counterexample showing how that property might be violated. However, most dependability cases are written with a single product in mind. At the same time, software product lines (families of related software products) have been studied with the goal of modeling variability and commonality and building family-based techniques for both modeling and analysis. This thesis presents a novel approach for building an end to end dependability case for a software product line, where a property is formally modeled, a counterexample is found and then …

Shared Or Dedicated Infrastructures: On The Impact Of Reprovisioning Ability, Roch A. Guérin, Kartik Hosanagar, Xinxin Li, Soumya Sen

Computer Science and Engineering Faculty Research

New technologies, such as virtualization, are transforming the way in which software and services are deployed and delivered to their users. They are behind the emergence of IT offerings such as cloud computing and converged networks, and manifest themselves through two important trends: (1) lower the cost of sharing a common infrastructure across multiple services with disparate resource requirements, and (2) dynamic provi- sioning of capacity in response to demand. Conventional wisdom is that both of these capabilities are synergistic, with greater provisioning flexibility improving the benefits derived from sharing computing or network resources. Consequently, a service operator should now …

Single Photon Avalanche Diode (Spad) Array Quenching And A Novel Quantum Random Number Generator (Qrng), Mano Rahul Kumar Pakalapati

Theses and Dissertations

Single Photon Avalanche Diodes, SPADs is a single-photon sensitive light detector with capabilities of pico-second timing resolutions and offer potential for enhancing various fields of science to evolve into quantum-age. SPAD has applications ranging from quantum computing, cryptography (QKD) to applications in medicine such as neural imaging and Single Photon Emission Computed Tomography (SPECT). SPAD arrays are gaining popularity as they enable for parallel photon detection and 3D imaging. To account for the process tolerances and aging, each SPAD-pixel needs a tunable quenching circuit in the frontend for post-fabrication fine-tuning, this research work presents a novel Dual Triggered Tunable Active …

Development And Characterization Of A Biopolymer Direct-Write Process For 3d Microvascular Structures Formation., Xiaoming Fan

Electronic Theses and Dissertations

Engineering of bulk tissues has been limited by the lack of nutrient and waste exchange in these tissues without an adjacent capillary network. To produce microvasculature, a scaffold must be produced that provides temporary mechanical support and stimulate endothelial cell adhesion, growth, and morphogenesis into a vessel. However, current well-established techniques for producing microvasculature, such as electrospinning, are limited since they lack both the precision to control fiber placement in three-dimensional space and the ability to create fiber networks with predefined diameters to replicate the physiological microvascular progression from arteriole to capillary to venule. Our group has developed a “Direct-write” …

Thin-Walled Steel Tubular Circular Columns With Uniform And Graded Thickness Under Bidirectional Cyclic Loading, Qusay Al-Kaseasbeh, Iraj H.P. Mamaghani

Civil Engineering Faculty Publications

Thin-walled steel tubular circular columns are becoming an increasingly attractive choice as cantilever bridge piers due to their architectural, structural and constructional advantages. This paper aims to evaluate the strength and ductility of thin-walled steel tubular circular columns with uniform thickness (BC) and graded thickness (BGC) under bidirectional cyclic lateral loading in the presence of constant axial force. The analysis is carried out using a finite-element model (FEM) which is substantiated based on the experimental results in the literature. Then, the proposed BGC column with size and volume of material equivalent to the BC column is investigated. As a part …

A Comparative Study On The Stability And Degradation Of Perovskite Solar Cells, Jyotiska Chakraborty

Masters Theses

This study aims to investigate the environmental factors that affect the performance and longterm stability of the perovskite solar cells (PSCs). PSCs are based on organo-metallic halides (perovskites) that act as a light-sensitive compound that produces excitons when placed under the light. However, PSCs have a limited operating lifetime due to the degradation of the perovskite layer. There are many factors like moisture, UV light, and temperature that lead to the degradation of the perovskite layer. From the literature review, it was found that the PSCs do not degrade with the presence of oxygen in a dry and dark environment. …

Fiberglass Mat-Roll Carryover, Bryce Youngson, Aaliyah Ramos, Johann Cayaban, Tony Ledesma

Mechanical Engineering

The asphalt shingle is a type of roof shingle that uses asphalt for waterproofing. Its low cost and easy installation make it one of the most common roof covers in North America. General Aniline and Film (GAF) is one of the nation’s largest manufacturers of roofing materials and produces asphalt shingles at their Shafter, California manufacturing facility. To manufacture asphalt shingles, a base material of fiberglass passes through a series of processes that sequentially add asphalt, ceramic-coated mineral granules, and thermoplastic adhesive. The fiberglass base-material arrives at the manufacturing facility in large rolls that workers must periodically splice together in …

Evaluation Of The Most Significant Factors Influencing The Production Rates Of Highway Construction Activities, Angelica M. Neira

Theses and Dissertations

The utilization of realistic production rates is key for the accurate estimation of the contract time in highway projects. Several factors have an impact on production rates and change the total duration of construction projects. To organize and complete projects in a timely, quality and financially responsible manner, projects need to be scheduled carefully. Schedulers and planners of the Texas Department of Transportation (TxDOT) have been noticing that the estimated timelines are far from the reality and want to investigate if external factors can be the cause of this discrepancy. Some of the factors considered in this study are the …

An Advanced Approach For Contract Time Determination In Highway Projects, Cuauhtemoc Torres Cantu

Theses and Dissertations

In project management, finishing a project on schedule is one of the most important aspects. The Texas Department of Transportation (TxDOT) has been experiencing delays in some projects that can be accounted to an inaccurate project time estimation process. This research presents the development of a user-friendly and comprehensive computer-based contract time determination system. The enhanced system implements probabilistic scheduling techniques such as Program Evaluation and Review Technique, and Monte Carlo Simulation. Additionally, the application of a lognormal two-point PERT method is explored in this study. The new system proposes the use of a database of production rates based on …

Process Improvement And Lift Design For The Installation Of A Metrology Machine Assembly, Dalt J. Lasell, James Mitchell O'Meara, Matthew Steensma

Industrial and Manufacturing Engineering

The objective is to work with Onto Innovations, a leading provider of semiconductor metrology and manufacturing solutions, to develop a system that safely installs a 250lb optics plate into the Atlas III: one of their metrology machines. Based in Milpitas, CA, Onto Innovations utilizes a variety of operations to create different products and assembles each product on site. The 250lb optics plates are WIP that are transferred between fixtures and the Atlas III using a combination of lifts and human workers. The WIP have long lead times, high tolerances, and large costs associated with their manufacturing process.

Onto Innovations identified …

Automation Of Data Analysis In Formula 1, Adam Joseph Mourad, Prescott Jeanne Delzell, Patrick Conner Mccabe

Industrial and Manufacturing Engineering

This paper explores economic solutions for Formula 1 racing companies who are interested in data visualization tools. The research was conducted on the current development of data gathering, data visualization, and data interpretation in Formula 1 racing. It was found that a large chunk of racing companies within the league needs an affordable, effective, and automated visualization tool for data interpretation. As data collection in Formula 1 arises, the need for faster and more powerful software increases. Racing companies profit off-brand exposure and the more a racing team wins, the more exposure they receive. The goal of the paper focuses …

Effects Of Temperature And Nitrogen Depletion On Biodiesel Production Under Saline Conditions By A Mixed Algal Community, Sarah J. Kintner

Nanoscience and Microsystems ETDs

The overall objective addressed in this research was to gain a better understanding of how native mixed cultures of phototrophic microorganisms from a saline system may be used for biodiesel production. Laboratory batch reactors were grown under variable temperatures and nitrogen concentrations with original inoculum from a hypersaline pond in central New Mexico. Growth at 40 C° led to lower lipid production, lower nitrate consumption, and less diverse communities than growth at 20° C. All communities were dominated by the cyanobacteria Plectonema except the in second experiment, where they were only 30% of the culture. In a second experiment with …

Persistence And Mitigation Of Antibiotic Resistance In Manure And Manure-Amended Soils, Mara J. Zelt

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The emergence of antibiotic resistance (AR) is a growing global threat to human and animal health. The work described here asses the AR mitigation potential of management strategies at critical control points in livestock production, and agricultural land management as well as the effectiveness of a communication strategy to convey research-based information to empower behavioral change that could mitigate AR.

The first study evaluates the impact of beef cattle diet management strategies on AMR prevalence in manure. Two treatments – forage concentration and essential oils – in cattle diets were evaluated for their impact on AMR bacteria in feedlot manure. …

Flex-Ro: A Robotic High Throughput Field Phenotyping System, Joshua N. Murman

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Research in agriculture is critical to developing techniques to meet the world’s demand for food, fuel, fiber, and feed. Optimization of crop production per unit of land requires scientists across disciplines to collaborate and investigate new areas of science and tools for data collection. The use of robotics has been adopted in several industries to supplement labor, and accurately perform repetitious tasks. However, the use of autonomous robots in commercial agricultural production is still limited. The Flex-Ro (Flexible structured Robotic platform) was developed for use in large area fields as a multipurpose tool to perform monotonous agricultural tasks.

This work …

Non-Invasive Detection And Assessment Of Coronary Stenosis From Blood Mean Residence Times., Javad Hashemi

Electronic Theses and Dissertations

Coronary artery stenosis is an abnormal narrowing of a coronary artery caused by an atherosclerotic lesion that reduces lumen space. Fractional flow reserve (FFR) is the gold standard method to determine the severity of coronary stenosis based on the determination of rest and hyperemic pressure fields, but requires an invasive medical procedure. Normal FFR is 1.0 and FFR RT, to account for varying volume and flow rate of individual segments. Blood_RT was computed in 100 patients who had undergone the pressure-wire FFR procedure, and a threshold for Blood_RT was determined to assess the physiological significance of a stenosis, …

Exploratory Learning Activities In The Physics Classroom: Contrasting Cases Versus A Rich Dataset., Campbell Rightmyer Bego

Electronic Theses and Dissertations

In exploratory learning, students engage in an exploration activity on a new topic prior to instruction. This inversion of the traditional tell-then-practice order has been shown to benefit learning outcomes, especially conceptual knowledge and preparation for future learning, but not always. In three studies, the current work examines whether the type of exploration activity impacts learning mechanisms and outcomes, on the topic of gravitational field in undergraduate physics classrooms. Activities using either contrasting cases (CC) or a rich dataset (RD) are compared in two instructional orders, explore-first (EF) and instruct-first (IF). Learning outcomes measured procedural knowledge, conceptual knowledge, and performance …

Simulation And Optimization Of A Multi-Agent System On Physical Internet Enabled Interconnected Urban Logistics., Long Zheng

Electronic Theses and Dissertations

An urban logistics system is composed of multiple agents, e.g., shippers, carriers, and distribution centers, etc., and multi-modal networks. The structure of Physical Internet (PI) transportation network is different from current logistics practices, and simulation can effectively model a series of PI-approach scenarios. In addition to the baseline model, three more scenarios are enacted based on different characteristics: shared trucks, shared hubs, and shared flows with other less-than-truckload shipments passing through the urban area. Five performance measures, i.e., truck distance per container, mean truck time per container, lead time, CO₂ emissions, and transport mean fill rate, are included in …