Engineering Commons^™

Coupled Numerical Analysis Of Variations In The Capacity Of Driven Energy Piles In Clay, Arvin Farid, Daniel P. Zimmerman

Civil Engineering Faculty Publications and Presentations

Energy piles are an emerging alternative for the reduction of energy consumption to heat and cool buildings. Most of the research to date has focused on thermodynamic properties or axial and radial stress and strain of piles. This paper focuses on the effects of temperature fluctuation on the capacity of driven energy piles in clayey soils. Consolidation of clay surrounding driven piles affects the pile capacity (i.e., set up in clay). The heating and cooling periods of energy piles can create the excess pore-water pressure (EPWP, u_e) or relax the existing one (e.g., due to pile driving or …

Stair Climbing Hand Truck, James Mcpherson

All Undergraduate Projects

Abstract

Getting a heavy object up a flight of stairs usually requires a team of two or more people. Even with a team of people, the task is often still difficult, dangerous, and possibly insurmountable by one person. This problem is especially prevalent in for those who are moving into apartment complexes. Most apartment complexes have many buildings with two or more floors of living quarters, and elevators are often missing. This project sought to offer a solution to this problem. The solution in question; a motorized hand-truck with 2, trigonal planar pinwheels in place of the stock wheels. The …

Design And Fabrication Of A Remote-Controlled Plane For The Advanced Class Sae Aero Design Competition, Simon Esau

Theses

The goal of the present research is to optimize the radio-controlled airplane design for the Society of Automotive Engineers International (SAE) Aero Design Advanced Class competition. The SAE Aero Design Advanced Class seeks to further research and development of an aeronautic system that can deliver cargo and passengers to form a colony on Mars. Mission success is achieved by attending to the rules, constraints, and requirements of the competition. System-level engineering is applied to meet these diverse requirements and create a robust final product. The radio-controlled airplane submitted for competition can theoretically be scaled to carry colonists, habitats, and supplies …

Controlled Release Chemical Oxidation: Sodium Persulfate Encapsulated In Pvac Polymer, Mosarrat Samiha Kabir

Theses

In this study, sodium persulfate was encapsulated in polyvinyl acetate (PVAc) polymer to investigate the potential of activated persulfate to remediate total coliform and E. coli bacteria from contaminated water through a control release system. Controlled release structures were produced with the polymer and persulfate melted to form pellets at two different baking times. CRP structures containing 60 weight % sodium persulfates blended with 40 weight % polyvinyl acetate (PS- PVAc) were baked for 4 minutes and 10 minutes at 120ºC. The kinetics release of sodium persulfate was studied in a water system and in sand columns. Experimental results showed …

Feasibility Of Integrating Microfluidics Into Point-Of-Care Bio-Diagnostics, Swetha Manoharan

Theses

Potassium in the body needs to be maintained in proper levels for the normal functioning of heart and kidneys. The aim of this work is to develop a simple technique to measure the concentration of Potassium present in a bodily fluid sample, which can be used to assess the health condition of extremely sick patients, especially when the patient's condition needs to be diagnosed and results needs to be obtained rapidly under Point-of-Care settings. Microfluidics is one of the platforms used in bio-diagnostics because of several advantages such as low sample volume requirement and integration into high-throughput screening. In this …

2019 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.

Me-Em 2018-19 Annual Report, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering Annual Reports

Table of Contents

• Faculty Research
• Enrollment & Degrees
• Department News
• Graduates
• Faculty & Staff
• Alumni
• Donors
• Contracts & Grants
• Patents & Publications

A Novel Approach Towards Investigating The Performance Of Different Pvt Configurations Integrated On Test Cells: An Experimental Study, Vivek Tomar, Brian Norton, G. N. Tiwari

Articles

This study elaborates the theoretical and experimental analysis for the effectiveness of different photovoltaic thermal (PVT) configurations along with their building implications. An experiment was performed on especially designed four identical prototype test cells emphasise the building integration photovoltaic thermal (BiPVT) systems. A comparative analysis of four different possible PVT configurations integrated on identical test cells namely; Case 1: Glass-to-glass PV with duct integrated on a test cell, Case 2: Glass-to -glass PV without duct integrated on a test cell, Case 3: Glass to tedlar PV with duct integrated on a test cell and Case 4: Glass to tedlar PV …

Comparison Of Student And Faculty Perceptions Of Intent And Effectiveness Of Course Evaluations In An Engineering Curriculum, Thomas James

Faculty Publications - Electrical and Computer Engineering

No abstract provided.

Emerging Roles Of Virtual Patients In The Age Of Ai, C. Donald Combs, P. Ford Combs

Computational Modeling & Simulation Engineering Faculty Publications

Today's web-enabled and virtual approach to medical education is different from the 20th century's Flexner-dominated approach. Now, lectures get less emphasis and more emphasis is placed on learning via early clinical exposure, standardized patients, and other simulations. This article reviews literature on virtual patients (VPs) and their underlying virtual reality technology, examines VPs' potential through the example of psychiatric intake teaching, and identifies promises and perils posed by VP use in medical education.

Engineering Of Bio-Mimetic Substratum Topographies For Enhanced Early Colonization Of Filamentous Algae, Ali Khoshkhoo, Andres L. Carrano, David M. Blersch

Systems Science and Industrial Engineering Faculty Scholarship

No abstract provided.

Recycling Licoo2 With Methanesulfonic Acid For Regeneration Of Lithium-Ion Battery Electrode Materials., Bin Wang, Xin-Ye Lin, Yuanyuan Tang, Qiang Wang, Michael K.H. Leung, Xiao-Ying Lu

Faculty of Science & Technology (THEi)

With the massive consumption of lithium-ion batteries in portable consumer electronics and electric vehicles, proper disposal of spent batteries is of paramount importance for sustainable development. In this study, biodegradable organic methanesulfonic acid (MSA) is investigated for the first time to leach valuable metals from waste LiCoO2 powders for battery material regeneration. Under the optimal conditions, leaching efficiencies of lithium and cobalt are achieved at nearly ∼100% and ∼100%, respectively. Comparison experiment indicates that MSA can achieve better leaching performance than previously reported organic acids (e.g. citric acid, malonic acid, succinic acid, oxalic acid) under the same conditions. Besides, strong …

Year-Round-Based Optimization Of High-Low Control In The Regenerative Indirect Evaporative Cooler (Riec), Huaxia Yan, Yi Chen, Weilong Zhang

Faculty of Science & Technology (THEi)

The performance of the regenerative indirect evaporative cooler (RIEC) highly depends on ambient temperature and humidity. To maintain indoor thermal comfort, proper control strategy is essential. Previous research indicates that high–low (H-L) control by using multispeed technology is superior to the conventional on–off control in terms of energy consumption and thermal comfort. Under H-L control, a fan switches between a high speed and a low speed. The high speed is determined by the peak load. However, the selection of low speed involves a great sense of subjectivity. Therefore, the influence of low speed on system performance is comprehensively investigated and …

Thermal Properties Study And Performance Investigation Of Potassium Formate Solution In A Falling Film Dehumidifier/Regenerator., Tao Wen, Meng Wang, Yi Chen, Weifeng He, Yimo Luo

Faculty of Science & Technology (THEi)

Compared with the extensive attention drawn by salt solutions, the promising potassium formate (KCOOH) solution which has smaller causticity and lower price receives little attention in the field of liquid desiccant cooling system (LDCS). Consequently, the present paper studied both the thermal properties and mass transfer performance of KCOOH solution for its practical engineering application. The vapor pressure and density of KCOOH solution under different concentrations and temperatures were measured and then fitted in the form of polynomials with the mean absolute relative deviation (MARD) of 0.06% and 0.551% respectively. Referring to the data in the existing literature, the heat …

A Review On High Catalytic Efficiency Of Solid Acid Catalysts For Lignin Valorization, Weixiang Guan, Chi-Wing Tsang, Carol Sze Ki Lin, Christophe Len, Haoquan Hu, Changhai Liang

Faculty of Science & Technology (THEi)

It is imminent to develop renewable resources to replace fossil-derived energies as fossil resources are on the brink of exhaustion. Lignin is one of the major components of lignocellulosic biomass, which is a natural amorphous three-dimensional polymer with abundant C-O bonds and aromatic structure. Hence, valorization of lignin into high value-added liquid fuels and chemicals is regarded as a promising strategy to mitigate fossil resource shortages. Solid acid catalysts are extensively studied due to environmentally friendly in terms of the ease of separation, recovery and reduced amount of wastes. Hence, this review focuses on summarizing the recent progress of catalytic …

Micro/Nanostructured Mnco2o4.5 Anodes With High Reversible Capacity And Excellent Rate Capability For Next Generation Lithium-Ion Batteries, Bin Wang, Shifeng Wang, Yuanyuan Tang, Chi-Wing Tsang, Jinchuan Dai, Michael K.H. Leung, Xiao-Ying Lu

Faculty of Science & Technology (THEi)

Lithium-ion batteries have already achieved great success in consumer electronics. However, the electrochemical characteristics of the existing electrodes have constrained their widespread applications in electric vehicles, which need technical demands of high energy density and fast charging. Thus, it is highly desirable to explore high-performance electrodes with high reversible capacity and excellent rate capability. In this study, micro/nanostructured MnCo2O4.5 anodes were synthesized by hydrothermal treatment with the presence of positively charged poly(diallyldimethylammonium chloride). Physicochemical property studies suggested that the as-prepared MnCo2O4.5 of 2–5 µm in diameter was mainly composed of numerous nanoneedles, which were further comprised of many inter-connected nanoparticles. …

Synthesis Of Sea Urchin-Like Nico2o4 Via Charge-Driven Self-Assembly Strategy For High Performance Lithium-Ion Batteries, Bin Wang, Chi-Wing Tsang, Ka Ho Li, Yuanyuan Tang, Yanping Mao, Xiao-Ying Lu

Faculty of Science & Technology (THEi)

In this study, hydrothermal synthesis of sea urchin-like NiCo2O4 was successfully demonstrated by a versatile charge-driven self-assembly strategy using positively charged poly(diallydimethylammonium chloride) (PDDA) molecules. Physical characterizations implied that sea urchin-like microspheres of ~ 2.5 μm in size were formed by self-assembly of numerous nanoneedles with a typical dimension of ~ 100 nm in diameter. Electrochemical performance study confirmed that sea urchin-like NiCo2O4 exhibited high reversible capacity of 663 mAh g−1 after 100 cycles at current density of 100 mA g−1. Rate capability indicated that average capacities of 1085, 1048, 926, 642, 261, and 86 mAh g−1 could be achieved …

Separation Of Unburned Carbon From Coal Conversion Ash: Development And Assessment Of A Dry Method, Charlotte J. Badenhorst, Nicola J. Wagner, Bruno R.V. Valentim, Karel S. Viljoen, Ana C. Santos, Alexandra Guedes

Coal Combustion and Gasification Products Journal Archive

Unburned carbon found in coal conversion ash has the potential to be used in a variety of value-added applications. However, it is first necessary to separate the unburned carbon from the rest of the ash phases. This poses challenges due to the relatively low starting carbon-in-ash values (0.4 to 7.8 wt% reported for South African sources), and the high carbon grades (ideally ∼90 wt% carbon) and recoveries that need to be achieved. In this study a dry method for the separation of unburned carbon from coal ash was developed and assessed using fly, bottom, and gasification ash samples obtained from …

Correcting Human Errors In Rock Climbing, Regina Yan

ENGS 86 Independent Projects (AB Students)

In the sport of rock climbing, improper belay technique resulting from the belayer standing too far from the wall is a main source of accidents and injuries from lead climbing. This project aimed to correct human errors in lead belaying and climbing. The resulting product was the Belay Belt, a device that successfully measured the belayer’s distance from the wall and alerted the belayer when he or she exceeded a safe distance threshold.

Occupant Evacuation Behavior In Wildfires: Gap Analysis, Agnes Ampomah

Theses

This thesis investigates the impacts wildfires have on those who live within the Wildland Urban Interface (WUI) areas. The Fire Protection Research Foundation (FPRF) sponsored this investigation to provide insight on information concerning evacuee pre-movement delays and behaviors before the beginning of an evacuation, both in terms of types of behaviors and elapsed time for these delays. Furthermore, the analysis of evacuee behavior in wildfire past and present evacuations will assist in the construction of future evacuation models that will mitigate evacuee loses during evacuations. The investigation is based on literature reviews on wildfires and their evacuation processes, past and …

Control Of Separated Flow Using A Dielectric Barrier Discharge Plasma Actuator, Mahdi Hasan

Theses

Historically, Dielectric Barrier Discharge (DBD) plasma actuators have shown to be an effective method to control adverse pressure gradient induced boundary layer separation. In this study, a numerical investigation was carried out to explore the effects of a DBD plasma actuator on a three-dimensional incompressible, separated flow. The well-validated National Aeronautics and Space Administration (NASA) wall-mounted hump configuration studied in the simulations, were run at a Reynolds Number of 936,000, based on chord length, and a freestream Mach number of 0.1. The baseline code, CALC-LES, developed by the Chalmers University of Technology was modified to include the effects of the …

Reinforcement Learning Reward Design For Low-Level Controllers, Evan J. Olney

Theses

The past few decades have produced many successful applications of machine learning. In the area of automated controls, machine learning controllers have been developed to take advantage of the tendency for computers to stumble upon avenues to solutions people either overlooked, or simply do not have the computational capability to explore. Reinforcement learning is a machine learning technique for learning how to choose actions in an environment to increase its expected reward. The reward is the signal that indicates whether or not proper actions were chosen, therefore a behavioral goal is achieved from implicit rewards rather than explicit direction. The …

Investigating A Cyber-Human System For Millennial Caregivers, Ashley Lofton

Theses

Research indicates that most caregiving of persons with dementia (PwD) is done by adults 49 years of age and older. However, millennials make up 25% of the estimated 44 million caregivers in the United States. Although the definition varies, “millennials” for this research is defined by those born between 1984 - 2000, which aligns with the research by Strauss and Howe (2003). Millennial caregivers are taking on this task as their parents or grandparents get older and diagnosed with dementia. Taking on the task of caring for a loved one with dementia can present itself as difficult because of competing …

Kikodot Cat Prosthetic, Joe Watt

All Undergraduate Projects

In the modern world there have been many strides in the engineering community to perfect human prosthetics. The main goal of a prosthetic is to eventually have an artificial limb that can replace a functional one. However, while there have been many strides towards perfecting human prosthetics it is time to shift attention to the animal kingdom. There aren’t very many options for animals in terms of prosthetics. The goal of the Kikodot Cat Prosthetic is not just to create a functional and cheap prosthetic for cats but also to demonstrate the ease and low cost with the advent of …

Dual-Axis Solar Tracker, Alazone Smith

All Undergraduate Projects

The global energy crisis and continued supporting evidence of global climate change have begun to shift the world economies towards solutions that solve both challenges. Solar power has become one of the most recognizable and popularized renewable energy methods to date. In comparison to other photovoltaic systems, this project demonstrates the performance advantages of a dual-axis solar tracker. It also addressing its viability on a non-commercial scale. The objective was to improve upon previous solar tracker projects at Central Washington University by adding another axis to the system. This system implements both an actuator and a stepper motor to examine …

Composite Recycler: Delamination, Nathan Sauer

All Undergraduate Projects

A great deal of composite waste is generated in the construction of wings for the Boeing 777. These carbon fiber “wing trimmings” are currently being disposed of in a landfill. These carbon fiber boards are made of several layers laminated together, making them very rigid and hard to recycle. This report proposes a method to delaminate the layers of these composite wing trimmings using a hydraulic press and a V-shaped steel die so that they may be more easily shredded and thus recycled. A top, “male” die with two points is pressed into a bottom, “female” die with three points …

Mesoporous Bimetallic Oxides Supported Mono And Bimetallic Catalysts For Fischer-Tropsch Studies In A Stainless-Steel Microchannel Reactor, Robert Stevens-Boyd

Theses

Fischer-Tropsch (F-T) synthesis is the controlled catalyzed conversion of synthesized (syn) gas, a mixture of hydrogen and carbon monoxide, to fuel grade alkanes or hydrocarbons. One of the objectives of NSF-CREST Bioenergy Center is to develop stable catalysts for F-T synthesis with the goal of conversion of syngas enriched with CO2 in microchannel microreactors to liquid fuels. In our previous work, the effect of silica and titania sol-gel as support for F-T studies using syngas (CO:H2; 1:3 or 1:2) was investigated and significant differences in the activities of Co, Fe, and Ru catalysts were observed. In order to investigate synergistic …

Feedback Control For Leader Follower Architecture Of Unmanned Arial And Ground Vehicles, Mahmoud El Mahmoud

Theses

This thesis presents development of a feedback controller for a cooperative mission using unmanned aerial vehicle and unmanned ground vehicle. This developed controller offers a solution to the time delayed collaborative autonomous systems for multiple robot systems. There are many motivating applications for these missions including exploration, search and rescue in damaged areas. The architecture developed in this thesis consists of an unmanned ground vehicle as a leader and an unmanned aerial vehicle as a follower. To be specific, the unmanned ground vehicle navigates through a damaged environment and leads the mission. The unmanned aerial vehicle follows the leader and …

Fused Silica Capillary Interferometer With A Layer-By-Layer Functional Coating For The Analysis Of Chemicals Content In Aqueous Solutions, Arun Kumar Mallik, Gerald Farrell, Qiang Wu, Yuliya Semenova

Articles

A simple fused silica capillary interferometric (FSCI) sensor has been proposed and investigated for the detection and analysis of multiple chemical compounds content in aqueous solutions. The sensor was fabricated by splicing a commercially available fused silica capillary (FSC) with two single mode fibers to create a 0.7 cm long air cavity. The fiber surface was functionalized with two different polymers: poly (allylamine hydrochloride) (PAH) and sol-gel silica in sequence using a layer-by-layer deposition method. The operating principle of the sensor relies on light interference in the fused silica capillary cavity due to adhesion of the different chemical compounds on …

All Fibre Q-Switched Thulium-Doped Fibre Laser Incorporating Thulium–Holmium Co-Doped Fibre As A Saturable Absorber, Shi Li, Elfed Lewis, Gerald Farrell, Ahmad Haziq Aiman Rosol, A.A. Latiff, Sulaiman Wadi Harun, Bingang Guo, Pengfei Wang

Articles

A novel all fibre Q-switched Thulium-doped fibre laser (TDFL) is reported which includes a short length of a Thulium–Holmiumco-doped fibre (THDF) as a saturable absorber. A high repetition rate (27.26 kHz) coupled with a low pulse width (19.06μs) is obtained for single wavelength Q-switched pulse operation at an output wavelength of 1911.5 nm using a pump power of 200 mW. Increasing the pump power from 200 mW to 700 mW results in the repetition rate increasing from 27.26 kHz to 99.67 kHz and the pulse width decreasing from 19.06μs to 920 ns. The centre wavelength of the single Q-switched pulse …