Engineering Commons^™

Developing Silent Unmanned Aerial Vehicles, Glen Wright

Research on Capitol Hill

The optimization of a drone propeller’s acoustic signature can play an important role in the Department of Defense, observation of nature, commercial operations, and marine propulsion.

The aim of this research is to optimize the acoustic signature of propellers by isolating and modifying specific propeller characteristics. Propeller variations being researched in this project include:

• Leading-edge serrations: break up incoming fluid and evenly disperse it along airfoil
• Trailing-edge serrations: minimize vortex occurrences along the trailing edge of airfoil
• Airfoil ribs: force fluid through tangential channels along airfoil
• Winglets: disrupt turbulence and vortices at the tips of the propeller

Successful drone propeller …

Ripple Canceling In Power Conversion Circuits, Pourya Shamsi, Mehdi Ferdowsi

Electrical and Computer Engineering Faculty Research & Creative Works

A power circuit substantially canceling ripples at the source. The power circuit includes a switching circuit configured to control a power flow between an input and an output, a main storage element electrically connected in series with the switching circuit, and a resonant tank electrically coupled to the switching circuit and configured to compensate for switching ripples in the main storage element. Aspects of the invention can be applied to a converter circuit or to an inverter circuit.

Improving The Distribution And Use Of Biogas By Conversion To Methanol, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

In this technology review, the process of turning an average biogas into methanol will be presented. The purpose is to find a better method of transporting the energy contained within biogas so that it may be used in industry as a value added product. The first step is removal of hydrogen sulfide, a corrosive chemical that can breakdown mechanical parts. The second step is carbon capture and conversion of the biogas into hydrogen. The final step is the hydrogenation of carbon dioxide into methanol using a copper catalyst and an alcohol co-catalyst.

Coupling Computational Fluid Dynamics Simulations And Statistical Moments For Designing Healthy Indoor Spaces, Shamia Hoque, Firoza B. Omar

Faculty Publications

Cross-contamination between occupants in an indoor space may occur due to transfer of infectious aerosols. Computational fluid dynamics (CFD) provides detailed insight into particle transport in indoor spaces. However, such simulations are site-specific. This study couples CFD with statistical moments and establishes a framework that transitions site-specific results to generating guidelines for designing “healthy” indoor spaces. Eighteen cases were simulated, and three parameters were assessed: inlet/outlet location, air changes per hour, and the presence/absence of desks. Aerosol release due to a simulated “sneeze” in a two-dimensional ventilated space was applied as a test case. Mean, standard deviation, and skewness of …

A State-Of-The-Art Survey On Deep Learning Theory And Architectures, Md Zahangir Alom, Tarek M. Taha, Christopher Yakopcic, Stefan Westberg, Paheding Sidike, Mst Shamima Nasrin, Mahmudul Hasan, Brian C. Van Essen, Abdul A. S. Awwal, Vijayan K. Asari

Electrical and Computer Engineering Faculty Publications

In recent years, deep learning has garnered tremendous success in a variety of application domains. This new field of machine learning has been growing rapidly and has been applied to most traditional application domains, as well as some new areas that present more opportunities. Different methods have been proposed based on different categories of learning, including supervised, semi-supervised, and un-supervised learning. Experimental results show state-of-the-art performance using deep learning when compared to traditional machine learning approaches in the fields of image processing, computer vision, speech recognition, machine translation, art, medical imaging, medical information processing, robotics and control, bioinformatics, natural language …

Gastrointestinal Sensor Implantation System, Benjamin Terry, Weston Lewis, Wanchuan Xie, Pengbo Li, Alfred Tsubaki

Department of Mechanical and Materials Engineering: Faculty Publications

A gastrointestinal ( GI ) sensor deployment device is dis closed . In implementations , the sensor deployment device includes an orally - administrable capsule with a tissue cap ture device removably coupled to the orally - administrable capsule . The tissue capture device includes a plurality of fasteners for connecting the tissue capture device to GI tissue within a body . A biometric sensor is coupled to the tissue capture device for continuous or periodic monitoring of the GI tract of the body at the GI tissue attachment location . A chamber within the orally - administrable capsule is …

Thermal Transport In Layer-By-Layer Assembled Polycrystalline Graphene Films, David Estrada, Alondra Perez

Materials Science and Engineering Faculty Publications and Presentations

New technologies are emerging which allow us to manipulate and assemble 2-dimensional (2D) building blocks, such as graphene, into synthetic van der Waals (vdW) solids. Assembly of such vdW solids has enabled novel electronic devices and could lead to control over anisotropic thermal properties through tuning of inter-layer coupling and phonon scattering. Here we report the systematic control of heat flow in graphene-based vdW solids assembled in a layer-by-layer (LBL) fashion. In-plane thermal measurements (between 100 K and 400 K) reveal substrate and grain boundary scattering limit thermal transport in vdW solids composed of one to four transferred layers of …

The Potential Science And Engineering Value Of Samples Delivered To Earth By Mars Sample Return, David W. Beaty, Monica M. Grady, Harry Y. Mcsween, Elliot Sefton-Nash, B. L. Carrier, Francesca Altieri, Yuri Amelin, Eleonora Ammannito, Mahesh Anand, Liane G. Benning, Janice L. Bishop, Lars E. Borg, Dale Boucher, John R. Brucato, Henner Busemann, Kathleen A. Campbell, Andrew D. Czaja, Vinciane Debaille, David J. Des Marais, Michael Dixon, Bethany L. Ehlmann, Jack D. Farmer, David C. Fernandez-Remolar, Justin Filiberto, Jennifer Fogarty, Daniel P. Galvin, Y. S. Goreva, Lydia J. Hallis, Andrea Dawn Harrington, Elisabeth M. Hausrath, Chris D.K. Herd

Geoscience Faculty Research

Executive summary provided in lieu of abstract.

Information Technology News, Georgia Southern University

Information Technology: News & Publications (2012-2023)

• WIT Member wins First Data Spark Garage Competition!

Global Air Quality Trekkers: Clean Kitchen Study, Stephanie Schiavo, Samantha Dykhuis, Avalin Senefeld

Engagement & Service-Learning Summit

No abstract provided.

Improving Access To Clean Water Through Service Learning, Rachel E. Gehr, Tolu Odimayomi, Carolina Tornesi Mackinnon

Engagement & Service-Learning Summit

No abstract provided.

Increasing Stem Literacy Through Directed Outreach, Liesl Krause, Nicole Vike, Yukai Zou, Jana Vincent

Engagement & Service-Learning Summit

5th Annual Engagement and Service-Learning Summit: Connecting Through Listening and Scholarship, Thursday February 28th, 2019, Hosted by the Office of Engagement and Purdue Honors College

2003 - California Bulletin 118 - Update

Miscellaneous Documents and Reports

This is an update of the California Bulletin 118. The California Department of Water Resources (DWR) recognized the need for collection, summary, and evaluation of groundwater data as tools in planning optimal use of the groundwater resource. Bulletin 118 presents the results of groundwater basin evaluations in California. The Bulletin 118 series was preceded by Water Quality Investigations Report No. 3, Ground Water Basins in California (referred to in this bulletin as Report No. 3), published in 1952 by the Department of Public Works, Division of Water Resources (the predecessor of DWR). The purpose of Report No. 3 was to …

Safety Standards Must Be Met For Fire Fighting In Educational Workshops In Industrial Secondary Schools In The Arab Republic Of Egypt, Ibrahim Mahmoud Hassan, Wael Ahmed Rady, Walid Mahmoud El-Nahas

Emirates Journal for Engineering Research

The aim of the research is to establish safety standards for fire fighting within educational workshops in industrial secondary schools to determine the structural requirements for designing workshops in educational buildings and meet international standards. To achieve this a questionnaire was made and data collected for analysis and hypothesis testing using the statistical package of social Sciences (SPSS). Through the adoption of a number of different statistical methods and after conducting the analysis of research data and testing its hypotheses find a number of results, most importantly that the standards conform to international and local standards . The results also …

Exploring Boarding Strategies For High-Speed Railway, Tie-Qiao Tang, Yi-Xiao Shao, Liang Chen, Hai-Jun Huang, Ziqi Song

Civil and Environmental Engineering Faculty Publications

In light of the increasing demand for passenger transportation on high-speed railway (HSR), the pedestrian flow at HSR stations has become quite crowded in many countries, which has attracted researchers to study the HSR boarding behavior. In this paper, we propose three boarding strategies based on the features of the boarding behavior at an origin HSR station; we then use a cellular automaton (CA) model to study the impacts of boarding strategies on each passenger’s motion during the boarding process at HSR station. The simulation results indicate that some of the three strategies can optimize some passengers’ boarding time and …

A Numerical Analysis Of The Effects Of Wing Kinematics On Flapping Wing Aeroacoustics, Kabilan Nedunchezian, Chang-Kwon Kang, Hikaru Aono

PRC-Affiliated Research

Despite the recent interest in flapping wing aerodynamics, the aerodynamic sound generation mechanism of a flapping wing is inadequately understood. In this paper, the interplay between the wing motion, resulting unsteady aerodynamics, and aeroacoustics of a flapping wing flyer is investigated. The wing motion is varied in terms of the flapping amplitude, pitching amplitude, and the phase difference between flap and pitch. The unsteady flow around the flapping wing is numerically calculated using a well-validated Navier-Stokes equation solver. Acoustic pressures are computed using the Ffowcs-Williams-Hawkings equation in a three-dimensional space at varying distances from the wing. Two main sound generation …

A Numerical Analysis Of The Effects Of Wing Kinematics On Flapping Wing Aeroacoustics, Kabilan Nedunchezian, Chang-Kwon Kang, Hikaru Aono

PRC-Affiliated Research

Despite the recent interest in flapping wing aerodynamics, the aerodynamic sound generation mechanism of a flapping wing is inadequately understood. In this paper, the interplay between the wing motion, resulting unsteady aerodynamics, and aeroacoustics of a flapping wing flyer is investigated. The wing motion is varied in terms of the flapping amplitude, pitching amplitude, and the phase difference between flap and pitch. The unsteady flow around the flapping wing is numerically calculated using a well-validated Navier-Stokes equation solver. Acoustic pressures are computed using the Ffowcs-Williams-Hawkings equation in a three-dimensional space at varying distances from the wing. Two main sound generation …

A Numerical Analysis Of The Effects Of Wing Kinematics On Flapping Wing Aeroacoustics, Kabilan Nedunchezian, Chang-Kwon Kang, Hikaru Aono

PRC-Affiliated Research

Despite the recent interest in flapping wing aerodynamics, the aerodynamic sound generation mechanism of a flapping wing is inadequately understood. In this paper, the interplay between the wing motion, resulting unsteady aerodynamics, and aeroacoustics of a flapping wing flyer is investigated. The wing motion is varied in terms of the flapping amplitude, pitching amplitude, and the phase difference between flap and pitch. The unsteady flow around the flapping wing is numerically calculated using a well-validated Navier-Stokes equation solver. Acoustic pressures are computed using the Ffowcs-Williams-Hawkings equation in a three-dimensional space at varying distances from the wing. Two main sound generation …

Quantifying The Impact Of Weather Events On Travel Time And Reliability, Xu Zhang, Mei Chen

Kentucky Transportation Center Faculty and Researcher Publications

It is of practical significance to understand the specific impact of weather events on the operating condition of the surface transportation system so that proactive and reactive strategies can be quickly implemented by transportation agencies to minimize the negativity resulted from adverse weather events. Many studies have been conducted on quantifying such effects yet suffer from limitations such as subjectively defining a time window under uncongested conditions and not being able to account for the severe impact from weather events which result in travel time unreliability. To overcome those shortcomings in existing literature, an integrated data mining framework based on …

Analysis Of Information Characteristics Objects Of Chemical Technology, Nadyrbek Rustambekovich Yusupbekov, Shukhrat Manapovich Gulyamov, Mastura Bahadirovna Zainutdinova, Nasiba Zhumabaevna Khozhieva

Chemical Technology, Control and Management

In order to introduce generalized assessments of the degree of perfection of technological schemes of chemical-technological systems, the basic information characteristics of chemical-technological systems that can be determined from the statistical processing of random functions of the output coordinates of these systems are considered. The methods of calculation information characteristics objects Chemical Technology on thermodynamic analysis operation example monoethanolamine separating gas purification at a chemical plant.

Ordinary Differential Equation Neuralnetworks: Mathematics And Application Using Diffeqflux.Jl, Muhammad Moiz Saeed

Senior Capstone Theses

This paper has two objectives. 1. It simplifies the Mathematics behind a simple Neural Network. Furthermore, it explores how Neural Networks can be modeled using Ordinary Differential Equations(ODE). 2. It implements a simple example of an ODE Neural network using diffeqflux.jl library. My paper is based on the paper "Neural Ordinary Differential equations"[1] paper and contains multiple extracts from this paper and hence the work in chapter 4 should not be considered original work as it aims to explain the mathematics in the original paper and all credit is due to the authors of the paper [1]. This paper[1] was …

Multi-Agent System Of Protecting Information From Unauthorized Access, Tulqin Fayziyevich Bekmurodov, F.B. Botirov

Chemical Technology, Control and Management

Methods and tools of unlocking data from the local network are analyzed. Modern methods and software for data protection from unauthorized access from the local network are analyzed. The advantages and disadvantages of DLP (data loss / leakage prevention) demonstrate data protection against unauthorized access. Criteria for improving the efficiency of DLP system and DLP system with multi-agent intelligence are proposed.

2004 - Salinas Valley Groundwater Basin, Forebay Aquifer Subbasin, California Groundwater Bulletin 118 - Update

Miscellaneous Documents and Reports

An update of the California Groundwater Bulletin 118 as it relates to the Salinas Valley Groundwater Basin and the Forebay Aquifer Sub-Basin

Frameup: An Incriminatory Attack On Storj: A Peer To Peer Blockchain Enabled Distributed Storage System, Xiaolu Zhang, Justin Grannis, Ibrahim Baggili, Nicole Lang Beebe

Electrical & Computer Engineering and Computer Science Faculty Publications

In this work we present a primary account of frameup, an incriminatory attack made possible because of existing implementations in distributed peer to peer storage. The frameup attack shows that an adversary has the ability to store unencrypted data on the hard drives of people renting out their hard drive space. This is important to forensic examiners as it opens the door for possibly framing an innocent victim. Our work employs Storj as an example technology, due to its popularity and market size. Storj is a blockchain enabled system that allows people to rent out their hard drive space …

Developing And Testing Of An Upper Limb Exoskeleton For Stroke Patients, Drew Dudley, David Salazar

UNO Student Research and Creative Activity Fair

Objective: The main objective of this study was to determine functional and neuromuscular outcomes of stroke patients using their non-preferred hand with and without a 3D printed passive exoskeleton compared to controls using their non-preferred hand with and without the passive exoskeleton. Methods: Adults at least six months post stroke (Stroke, n = 5) and age- and sex- matched healthy controls (Control, n = 5) performed nine trials of a gross motor task while having their brain activity measured. The Fugl-Meyer and “Box and Block” test was used to measure the gross dexterity of the subjects with and without the …

Decreasing Technology Design Costs By Using Youtube Video To Evaluate User Acceptance, Tom Chappelear

UNO Student Research and Creative Activity Fair

User acceptance is a measure that contributes to technology feasibility which is a decision point that entrepreneurs use to help make better investment decisions (Hoffer, 2011). User acceptance testing is part of a design strategy where the system designer attempts to minimize risks and provide design information that an entrepreneur can use to make better investment decisions (Hoffer, 2011). A user acceptance testing instruments can range from a low-cost coffeeshop review to expensive lab-based user testing (Shneiderman, 2017). This study builds upon the User Acceptance of Information Technology (UTAUT) model to measure user acceptance for the system being evaluated (Venkatesh, …

Gait Alterations After Anterior Cruciate Ligament Injury And Implications For Return-To-Play Testing, Lindsey Remski

UNO Student Research and Creative Activity Fair

Introduction: Reoccurring injury to the anterior cruciate ligament (ACL) is a major problem for individuals who undergo ACL reconstructive surgery despite them meeting current requirements for return-to-play. Previous studies have found alterations in gait kinetics and kinematics of ACL deficient and ACL reconstruction patients. It is unknown if gait parameters, such as peak joint angles and moments, provide different information about patient function from what is provided by return-to-play outcomes. Purpose: To assess the relationships between peak joint angles, peak joint moments, and return-to-play outcomes for individuals with ACL injury. Methods: 6 subjects (3 ACL reconstruction, 3 ACL deficient) performed …

Effects Of A Passive Dynamic Lower-Leg Exoskeleton During Walking, Blake Beier

UNO Student Research and Creative Activity Fair

The ankle joint is one of the most important joints during walking. If the muscles surrounding the ankle are weak, there are reductions in the ability to generate appropriate torques and powers at the ankle. This leads to slower self-selected walking speeds, which correlate with poor physical functioning, more disabilities, increased hospitalization visits and costs, and even mortality. Because of this, many orthotic and exoskeletal devices have been created to restore proper ankle function by promoting ankle plantar flexion. Utilizing 3D printing and an extension spring, we created an easily accessible, reproducible, and modifiable exoskeleton that has the potential to …

Efficacy Of Assistive Devices Produced With Additive Manufacturing, James Pierce

UNO Student Research and Creative Activity Fair

Despite the frequency of musculoskeletal injuries such as sprains, broken bones and torn ligaments¹, treatment options are often costly, time-consuming and ill-fitted.^2,3 Additive manufacturing (“3D-printing) allows for the production of highly-customized and inexpensive assistive devices⁴, which suggests potential efficacy in the prescription of splints and casts for musculoskeletal injury.³ In the present study, a parametric, customizable splint/cast was created using a computer-aided design (CAD) package (Fusion 360, Autodesk, San Rafael, CA, USA) and produced with low-cost, desktop 3D printing (Ultimaker 2+ Extended, Ultimaker, Geldermalsen, Netherlands). Fitting of the devices was performed on five healthy …

Intensity And Pattern Of Daily Physical Activity Of Claudicating Patients, Cody Anderson

UNO Student Research and Creative Activity Fair

file:///C:/Users/codya/Desktop/Cody%20et%20al_2019_Human%20Movement%20Variability%20Conference.pdf