Engineering Commons^™

Monometric Mapping Flotation Process At Mikheevskiy Furniture Factory, Yu.G. Nikitina, I.P. Poyezhaev, G.A. Myrzabek, R.A. Musaev

Gorniy vestnik Uzbekistana

An integrated study on the sandstone hosted uranium deposits on the base of hydrodynamic simulation has been carried out to define optimal field opening schemes. The reservoir simulation and mass-transfer models for selected field opening schemes, ways of optimizing existing facilities and building of optimized scheme are the main results of this investigation.

Prospects Of Chatkalo-Kuramin's Diamond Presence Zones And Correlated Territories, Uzbekistan, A.M. Azizov, R.G. Yusupov, S.D. Fatkhullaev

Gorniy vestnik Uzbekistana

The Middle and South Tien Shan as orogenic regions with accompanying sharp changes in temperature and pressure (Koshmansai diatreme) are characterized by conditions for the formation of diamond manifestations. Prospects of Uzbekistan for radical manifestations of diamonds are assigned to the activated regions of the Archean (?) With manifestations of Lower Proterozoic eclogite-like formations with a complex of associated alpinotype ultrabasites, as well as alkaline intraplate basaltoids, K1.

Synthesis And Spectroscopic Research Coordination Compounds Of Nickel (Ii) And Copper (Ii) With Bases Of Shiff, Z.T. Karimov, S.I. Nurnazarov

Gorniy vestnik Uzbekistana

The Ligand is product of condensation salicyl aldehyde with ortho aminophenol. On the basis of the resulted Ligand, synthesed coordinated compound of Cu(II) and Ni(II). Newly synthesized complexes investigate the structural formula of IR, PR, EPR of the spectroscopic researches.

Nano-Scale Rare Earth Distribution In Fly Ash Derived From The Combustion Of The Fire Clay Coal, Kentucky, James C. Hower, Dali Qian, Nicolas J. Briot, Eduardo Santillan-Jimenez, Madison M. Hood, Ross K. Taggart, Heileen Hsu-Kim

Center for Applied Energy Research Faculty and Staff Publications

Fly ash from the combustion of eastern Kentucky Fire Clay coal in a southeastern United States pulverized-coal power plant was studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and selected area electron diffraction (SAED). TEM combined with elemental analysis via energy dispersive X-ray spectroscopy (EDS) showed that rare earth elements (REE; specifically, La, Ce, Nd, Pr, and Sm) were distributed within glassy particles. In certain cases, the REE were accompanied by phosphorous, suggesting a monazite or similar mineral form. However, the electron diffraction patterns of apparent phosphate minerals were not definitive, and P-lean regions of the glass consisted …

Electrical & Computer Engineering News, Georgia Southern University

Electrical & Computer Engineering: News & Publications (2014-2023)

• Three Electrical and Computer Engineering undergraduate research students represent Georgia Southern at the Poster on the Capitol event

Distributed Wireless Algorithms For Rfid Systems: Grouping Proofs And Cardinality Estimation, Vanya D. Cherneva

LSU Doctoral Dissertations

The breadth and depth of the use of Radio Frequency Identification (RFID) are becoming more substantial. RFID is a technology useful for identifying unique items through radio waves. We design algorithms on RFID-based systems for the Grouping Proof and Cardinality Estimation problems.

A grouping-proof protocol is evidence that a reader simultaneously scanned the RFID tags in a group. In many practical scenarios, grouping-proofs greatly expand the potential of RFID-based systems such as supply chain applications, simultaneous scanning of multiple forms of IDs in banks or airports, and government paperwork. The design of RFID grouping-proofs that provide optimal security, privacy, and …

Assessment And Correction Of Lidar-Derived Dems In The Coastal Marshes Of Louisiana, William M. Lauve

LSU Master's Theses

The onset of airborne light detection and ranging (lidar) has resulted in expansive, precise digital elevation models (DEMs). DEMs are essential for modeling complex systems, such as the coastal land margin of Louisiana. They are used for many applications (e.g. tide, storm surge, and ecological modeling) and by diverse groups (e.g. state and federal agencies, NGOs, and academia). However, in a marsh environment, it is difficult for airborne lidar to produce accurate bare-earth measurements and even accurate elevations are rarely verified by ground truth data. The accuracy of lidar in marshes is limited by the sensor’s resolution …

Information Technology News, Georgia Southern University

Information Technology: News & Publications (2012-2023)

• Introducing the new Department Chair of IT

• IT Instructor Positions Ad

(Poster) A Bird's-Eye View Of What Learners Like And Dislike About Stem Moocs Using Topic Modeling, Abigail Gentry

ASEE IL-IN Section Conference

Massive Open Online Courses (MOOCs) are offered for many different subject areas such as STEM, Arts, Medicine, and Business, with differences in each subject area. In this study, we focus on STEM MOOCs and their unique challenges. In order to design better MOOCs to encourage engagement, it is important to understand learners expectations and preferences based on the subject area by analyzing end-of-course evaluation surveys of STEM MOOCs. We analyzed open-ended learner feedback for two post-survey questions for 110 unique STEM MOOCs (some with multiple re-runs) with a total of 8100 responses, offered on the FutureLearn platform. The end-of-course survey …

(Poster) Freshman Engineering Student Engagement Through Sport’S Data Analytics, Adam Tennant

ASEE IL-IN Section Conference

Instructors of engineering for the last quarter of a century have attempted to engage undergraduates through project based learning. Often these topics can fall short due to a lack of interest by the students. Faculty-lead student research experiences addressing pop-culture topics of interest can often stimulate student engagement and have the possibility to positively impact student-retention rates. This presentation reports on the preliminary findings of a sport’s data analytics approach for faculty-led student investigations and increased engagement. Freshman engineering students will rank teams or individuals through the PageRank algorithm creating a model of the complexity of sports. The specifics of …

(Poster) Deepening Engineering Design Experience: A Novel Approach To Senior Design, Donald Peterson, Mansour Tahernezhadi, Abul Azad

ASEE IL-IN Section Conference

This poster advances a new framework for the senior design course in order to deepen engineering design experience for engineering students. The proposed framework for the new senior design course while retains the traditional topics such as problem identification, conceptual design and analysis, prototyping and the preparation of a work schedule required to carry out the project, it fosters an early in the cycle start, typically after week 6, towards the design conceptualization and prototyping in the first academic semester. This is in stark contrast with traditional practices where the design conceptualization and prototyping largely takes place in the second …

Modeling Of Fluid Injection For Hydraulic Fracturing Initiation In Porous Rock Formations, Krishna Adhikari

LSU Master's Theses

Hydraulic fracturing has been widely opted in recent times to simulate the unconventional reservoirs and thus, has become key a subject of interest in petroleum engineering. The stress concentration around the borehole affects the breakdown pressure and fracture reopening pressure during the hydraulic fracturing treatments. Thus, the state of stress around borehole wall and its surrounding rocks due to instantaneous drilling and a fluid injection at borehole surface needs to be determined accurately to initiate the hydraulic fractures. This research intends to derive the analytical stress solution of inclined borehole subjected to time-dependent fluid injection and in-situ stress, verify the …

Natural Gas Conversion Into Value Added Chemicals Using Solid Acid Catalysts, Swarom Ravindra Kanitkar

LSU Doctoral Dissertations

Direct, non-oxidative conversion of natural gas to value-added chemicals has been identified as one of the grand challenges of the 21^st century. Circumventing indirect and costly reforming steps is highly sought after and solid acids can play an important role in that.

The direct conversion of methane to higher hydrocarbons and hydrogen can be catalyzed using “superacids” at < 450 °C. Reported superacid catalysts in solid, liquid, and gas phase included sulfated zirconia (SZ), HF-SbF₅, FSO₃H-SbF₅, and HBr-AlBr₃. Liquid and gas phase superacids presented difficulties in separation while the solid ones provided low yields. Here, we report a new class of Br-based solid superacids, AlBr_x/H-ZSM-5 (“ABZ-5”, …

Reliability-Based Shear Rating Of Prestressed Concrete Bridge Girders Considering Capacity Adjustment Factor, Alaa I. Chehab, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

In this study, the reliability of prestressed concrete (PC) bridge girders in the shear rating process is quantified, where the use of a simple procedure to enhance the accuracy of shear capacity evaluation for rating is evaluated. It was found that the approximate methods used in code-based procedures to develop shear resistance used for reliability calibration of the AASHTO Bridge Design Specifications and the Manual for Bridge Evaluation result in larger discrepancies in reliability than previously assumed, as well as substantially conservative shear capacity evaluation in most cases. To examine the effects of using a more accurate shear rating process, …

Robotic Motion Generation By Using Spatial-Temporal Patterns From Human Demonstrations, Yongqiang Huang

USF Tampa Graduate Theses and Dissertations

Robots excel in manufacturing facilities because the tasks are repetitive and do not change. However, when the tasks change, which happens in almost all tasks that humans perform daily, such as cutting, pouring, and grasping, etc., robots perform much worse. We aim at teaching robots to perform tasks that are subject to change using demonstrations collected from humans, a problem referred to as learning from demonstration (LfD).

LfD consists of two parts: the data of human demonstrations, and the algorithm that extracts knowledge from the data to perform the same motions. Similarly, this thesis is divided into two parts. The …

Force Feedback And Intelligent Workspace Selection For Legged Locomotion Over Uneven Terrain, John Rippetoe

USF Tampa Graduate Theses and Dissertations

Legged robots present an incredible opportunity for humanity to conduct dangerous operations such as search and rescue, disaster recovery, and planetary exploration without ever placing themselves in harms way. The ability of a leg to more freely dictate its shape, orientation, and length gives it tremendous mobility and adaptability demanded of a system intended for operation outside of a controlled environment. However, one only need look at the average cat, dog, or friendly neighborhood squirrel to understand the immense gap that exists between what is possible of legged systems and their current set of capabilities.

Areas of study relevant to …

Investigation Of Electronic And Optical Properties Of 2-Dimensional Semiconductor Tin Selenide (Snse) Thin Films, Shakila Afrin

Dissertations and Theses

Over the last 5 decades, the semiconductor industry has been well served by Si based technology due to its abundant availability, lower manufacturing cost, large wafer sizes and less complexity in fabrication. Over this period, electronic devices and integrated systems have been miniaturized by downscaling of the transistors. The miniaturization has been guided by the Moore's law where the numbers of transistors have doubled over every two years. However, the trend of transistor miniaturization is fast approaching its limit. Hence, alternate and innovative solutions are necessary to tackle this problem and this propels the research for finding novel materials with …

Development Of Heavyweight Self-Compacting Concrete And Ambient-Cured Heavyweight Geopolymer Concrete Using Magnetite Aggregates, Afsaneh Valizadeh, Farhad Aslani, Zohaib Asif, Matt Roso

Research outputs 2014 to 2021

Heavyweight self-compacting concrete (HWSCC) and heavyweight geopolymer concrete (HWGC) are new types of concrete that integrate the advantages of heavyweight concrete (HWC) with self-compacting concrete (SCC) and geopolymer concrete (GC), respectively. The replacement of natural coarse aggregates with magnetite aggregates in control SCC and control GC at volume ratios of 50%, 75%, and 100% was considered in this study to obtain heavyweight concrete classifications, according to British standards, which provide proper protection from sources that emit harmful radiations in medical and nuclear industries and may also be used in many offshore structures. The main aim of this study is to …

Andrews Students Win Stryker Engineering Challenge, Hannah Gallant

Andrews Agenda: Campus News

No abstract provided.

Protein-Polymer Conjugates Synthesized Using Water-Soluble Azlactone-Functionalized Polymers Enable Receptor-Specific Cellular Uptake Toward Targeted Drug Delivery, Julia S. Kim, Allison R. Sirois, Analia J. Vazquez Cegla, Eugenie Jumai'an, Naomi Murata, Maren E. Buck, Sarah J. Moore

Chemistry: Faculty Publications

Conjugation of proteins to drug-loaded polymeric structures is an attractive strategy for facilitating target-specific drug delivery for a variety of clinical needs. Polymers currently available for conjugation to proteins generally have limited chemical versatility for subsequent drug loading. Many polymers that do have chemical functionality useful for drug loading are often insoluble in water, making it difficult to synthesize functional protein–polymer conjugates for targeted drug delivery. In this work, we demonstrate that reactive, azlactone-functionalized polymers can be grafted to proteins, conjugated to a small-molecule fluorophore, and subsequently internalized into cells in a receptor-specific manner. Poly(2-vinyl-4,4-dimethylazlactone), synthesized using reversible addition–fragmentation chain …

The Effect Of Defects And Surface Modification On Biomolecular Assembly And Transport, Haneen Martinez

Nanoscience and Microsystems ETDs

Nanoscale transport using the kinesin-microtubule (MT) biomolecular system has been successfully used in a wide range of nanotechnological applications including self-assembly, nanofluidic transport, and biosensing. Most of these applications use the ‘gliding motility geometry’, in which surface-adhered kinesin motors attach and propel MT filaments across the surface, a process driven by ATP hydrolysis. It has been demonstrated that active assembly facilitated by these biomolecular motors results in complex, non-equilibrium nanostructures currently unattainable through conventional self-assembly methods. In particular, MTs functionalized with biotin assemble into rings and spools upon introduction of streptavidin and/or streptavidin-coated nanoparticles. Upon closer examination of these structures …

Investigation Of The Coupled Nuclear, Thermal-Hydraulic, And Thermomechanical Response Of A Natural Circulation Research Reactor Under Severe Reactivity-Initiated Accident Transients, Darren G. Talley

Mechanical Engineering ETDs

Research reactors play an important role in higher education, scientific research, and medical radioisotope production around the world. It is thus important to ensure the safety of facility workers and the public. This work presents a new reactor transient analysis code, referred to as Razorback, which computes the coupled reactor kinetics, fuel element heat transfer, fuel element thermal expansion and thermal stress, and thermal-hydraulic response of a natural circulation research reactor. The code was developed for the evaluation of large rapid reactivity addition in research reactors, with an initial focus on the Annular Core Research Reactor (ACRR) at Sandia National …

Limit Equilibrium Method-Based Shear Strength Prediction For Corroded Reinforced Concrete Beam With Inclined Bars, Yafei Ma, Baoyong Lu, Zhongzhao Guo, Lei Wang, Hailong Chen, Jianren Zhang

Mechanical Engineering Faculty Publications

Shear strength is a widely investigated parameter for reinforced concrete structures. The corrosion of reinforcement results in shear strength reduction. Corrosion has become one of the main deterioration factors in reinforced concrete beam. This paper proposes a shear strength model for beams with inclined bars based on a limit equilibrium method. The proposed model can be applied to both corroded and uncorroded reinforced concrete beams. Besides the tensile strength of longitudinal steel bars, the shear capacity provided by the concrete on the top of the diagonal crack, the tensile force of the shear steel at the diagonal crack, the degradation …

Tin Assisted Fully Exposed Platinum Clusters Stabilized On Defect-Rich Graphene For Dehydrogenation Reaction, Jiayun Zhang, Yuchen Deng, Xiangbin Cai, Yunlei Chen, Mi Peng, Zhimin Jia, Zheng Jiang, Pengju Ren, Siyu Yao, Jinglin Xie, Dequan Xiao, Xiao-Dong Wen, Ning Wang, Hongyang Liu, Ding Ma

Chemistry and Chemical Engineering Faculty Publications

Tin assisted fully exposed Pt clusters are fabricated on the core-shell nanodiamond@graphene (ND@G) hybrid support (a-PtSn/ND@G). The obtained atomically dispersed Pt clusters, with an average Pt atom number of 3, were anchored over the ND@Gsupport by the assistance of Sn atoms as a partition agent and through the Pt-C bond between Pt clusters and defect-rich graphene nanoshell. The atomically dispersed Pt clusters guaranteed a full metal availability to the reactants, a high thermal stability, and an optimized adsorption/desorption behavior. It inhibits the side reactions and enhances catalytic performance in direct dehydrogenation of n-butane at a low temperature of 450 °C, …

Production Of Secondary Organic Aerosol During Aging Of Biomass Burning Smoke From Fresh Fuels And Its Relationship To Voc Precursors, A. T. Ahern, E. S. Robinson, D. S. Tkacik, L. E. Hatch, Kelley Barsanti, C. E. Stockwell, Robert J. Yokelson, Multiple Additional Authors

Civil and Environmental Engineering Faculty Publications and Presentations

After smoke from burning biomass is emitted into the atmosphere, chemical and physical processes change the composition and amount of organic aerosol present in the aged, diluted plume. During the fourth Fire Lab at Missoula Experiment, we performed smog‐chamber experiments to investigate formation of secondary organic aerosol (SOA) and multiphase oxidation of primary organic aerosol (POA). We simulated atmospheric aging of diluted smoke from a variety of biomass fuels while measuring particle composition using high‐resolution aerosol mass spectrometry. We quantified SOA formation using a tracer ion for low‐volatility POA as a reference standard (akin to a naturally occurring internal standard). …

Deswelling Induced Morphological Changes In Dual Ph And Temperature Responsive Ultra-Low Crosslinked Poly (N-Isopropyl Acrylamide)-Co-Acrylic Acid Microgels, Molla R. Islam, Maddie Tumbarello, L. Andrew Lyon

Engineering Faculty Articles and Research

Poly(N-isopropylacrylamide) microgels prepared without exogenous cross-linker are extremely “soft” as a result of their very low cross-linking density, with network connectivity arising only from the self-crosslinking of pNIPAm chains. As a result of this extreme softness, our group and others have taken interest in using these materials in a variety of bioengineering applications, while also pursuing studies of their fundamental properties. Here, we report deswelling triggered structural changes in poly(N-isopropylacrylamide-co-acrylic acid) (ULC10AAc) microgels prepared by precipitation polymerization. Dynamic light scattering suggests that the deswelling of these particles not only depends on the collapse of …

34-Inch Tall Three Beam Transition To Concrete Buttress, Scott Rosenbaugh, Wyatt Fallet, Ronald K. Faller, Robert W. Bielenberg, Jennifer Schmidt

Nebraska Department of Transportation: Research Reports

Roadway resurfacing and overlay projects effectively reduce the height of roadside barriers placed adjacent to the roadway, which can negatively affect their crashworthiness. More recently, bridge rails and concrete barriers have been installed with slightly increased heights to account for future overlays. However, adjacent guardrails and approach transitions have not yet been modified to account for overlays. The objective of this project was to develop an increased-height, approach guardrail transition (AGT) to be crashworthy both before and after roadway overlays of up to 3 in. (76 mm).

A 34-in. (864-mm) tall, thrie beam transition was designed such that the system …

Fabrication Of Biased-Magnetorheological Elastomers (B-Mre) Based On Magnetized Ferromagnetic Particles, Choonghan Lee, Woosoon Yim

Mechanical Engineering Faculty Research

Magnetorheological elastomers (MREs), like MR fluids, exploit magnetic forces between ferromagnetic particles to produce a material with instantaneously adjustable properties of stiffness and damping with external magnetic fields. In MREs, the particles are a part of a structured elastomer matrix, and an external magnetic field is applied to achieve an instantaneous change of stiffness due to magnetic forces between particles. A drawback of conventional MREs is its inability of softening (reduce stiffness) under an external field. Many engineering applications need an instant change of its stiffness in both directions, which requires a magnetic bias embedded in the MRE. One way …

Immersive Virtual Reality Attacks And The Human Joystick, Peter Casey, Ibrahim Baggili, Ananya Yarramreddy

Electrical & Computer Engineering and Computer Science Faculty Publications

This is one of the first accounts for the security analysis of consumer immersive Virtual Reality (VR) systems. This work breaks new ground, coins new terms, and constructs proof of concept implementations of attacks related to immersive VR. Our work used the two most widely adopted immersive VR systems, the HTC Vive, and the Oculus Rift. More specifically, we were able to create attacks that can potentially disorient users, turn their Head Mounted Display (HMD) camera on without their knowledge, overlay images in their field of vision, and modify VR environmental factors that force them into hitting physical objects and …

Human Action Recognition In Video Surveillance System, Fadwa Subhi Al Azzo

Theses and Dissertations

The human action recognition in video surveillance (HARVS) system is the system that classifies and detects action in videos. The system depends on two modes: training mode, in which the system learns about the human actions in video samples, and testing mode, in which the system recognizes the unknown action in testing video samples. HARVS in computer vision is a desirable approach because of its various desired applications such as surveillance environments, security systems, robot vision machine, human-computer interaction, human traffic accident detectors, multimedia retrieval, entertainment environments, and healthcare systems. The main aim of the work in this dissertation is …