Engineering Commons^™

Energy & Carbon Neutral Nyc, Evan Banks, Elena Zimareva, Elena Malysheva

Publications and Research

In 2016, the world's leading countries signed the Paris Agreement which focused on reducing anthropogenic climate change on the planet. On May 2019, New York State and New York City declared its own ambitious goals aimed at decarbonizing the city and restricting the state’s energy use to relying completely on renewables.

Some of these goals specifically target infrastructure in the city since estimates cite buildings as accounting for nearly 70% of New York’s energy use. The main law of New York’s Climate Policy, Local Law 97, requires all buildings over 25,000 sq ft to reduce their CO2 footprint by 40% …

Static Analysis Of Structural Members, Amani Calderon, Alexis Villalona, Farhad Alinaghizadeh

Publications and Research

This research is devoted to statics analysis of structural members under mechanical loads. Static analysis of beams under uniform transverse mechanical loads is presented. The beams are supported by simply supported boundary condition at both sides. The equilibrium equation of the beams is obtained and solved using analytical method and numerical method. The numerical method employed in this work is generalized differential quadrature (GDQ) method. The type of differential quadrature method used for numerical solution is the polynomial-based GDQ method. The differential equation is discretized into algebraic equations based on the GDQ technique. The algebraic equations are then solved to …

Green Roof System Integrated Soil Methods, Jude R. Vallon, Ivan L. Guzman

Publications and Research

Large metropolitan areas like NYC are seeking to integrate sustainability into retrofitting buildings for the development of green infrastructure. Among the many environmental issues of urbanization, the UHI (urban heat island) effect and storm water runoff are of particular interest when it comes building structures. Individual buildings can contribute towards mitigating these effects with implementation of vegetative rooftops, i.e. Green Roofs. Commercial buildings are currently receiving government incentives and new constructions are required to include green roof installations. However, if existing buildings are considering the addition of a green roof on an existing roof, they have to factor in the …

Low-Cost Near Infrared Diffuse Optical Imaging System, Mohammed Z. Shakil, Chen Xu

Publications and Research

Diffuse Optical Tomography (DOT) and Optical Spectroscopy using near-infrared (NIR) diffused light has demonstrated great potential for the initial diagnosis of tumors and in the assessment of tumor vasculature response to neoadjuvant chemotherapy. The NIR technique utilizes intrinsic hemoglobin contrast, which is directly related to tumor angiogenesis development, a key process required for tumor growth and metastasis. The NIR diffuse tomography holds great promise in distinguishing early-stage invasive breast cancers from benign lesions. This technique also provides insight into tumor metabolism and tumor hypoxia, important indicators of tumor response to various forms of therapy. Currently, the high cost of the …

Passive Separation Of Binary Fluid Mixtures In Microchannels Using Lattice Boltzmann Method, Mohanad Kamil Radhi

Dissertations and Theses

Fluid mixtures in real life exist in two forms: miscible and immiscible. Separation of these mixtures using chemical agents or thermal energy has both environmental and economic disadvantages. The high cost and the environmental damage caused by the traditional separation techniques have stimulated both academia and industry to seek alternatives. The emergence of microfluidics offers robust solutions for a broad span of transport problems due to the high surface to volume ratio and reduced length scales. Particularly, the separation efficiency increases significantly due to the aforementioned feature. However, there is still a pressing need of passive separations for the sake …

65th Conference On Senior Engineering Design, College Of Engineering And Applied Sciences

Senior Engineering Design Conference

The 65th Conference on Senior Engineering Design Projects. The conference will be held from 9:00 a.m. to 4:00 p.m., Tuesday, December 3, 2019 at the College of Engineering and Applied Sciences on the Parkview Campus of Western Michigan University. The College of Engineering and Applied Sciences sponsors the conference to showcase the work of its graduating seniors, who are required to complete a capstone project that puts into practice what they have learned. Many of the projects are sponsored by business and industry.

Analysis Of Shock Wave Unsteadiness Using Space And Time Correlations Applied To Shadowgraph Flow Visualization Data, Shannon Marko, Phillip M. Ligrani

PRC-Affiliated Research

Unsteady flow characteristics of a normal shock wave, a lambda foot, and a separated turbulent boundary layer are investigated within a unique test section with supersonic inlet flow. The supersonic wind tunnel facility, containing this test section, provides a Mach number of approximately 1.54 at the test section entrance. Digitized shadowgraph flow visualization data are employed to visualize shock wave structure within the test section. These data are analyzed to determine shock wave unsteadiness characteristics, including grayscale spectral energy variations with frequency, as well as time and space correlations, which give coherence and time lag properties associated with perturbations associated …

Analysis Of Shock Wave Unsteadiness Using Space And Time Correlations Applied To Shadowgraph Flow Visualization Data, Shannon Marko, Phillip M. Ligrani

PRC-Affiliated Research

Unsteady flow characteristics of a normal shock wave, a lambda foot, and a separated turbulent boundary layer are investigated within a unique test section with supersonic inlet flow. The supersonic wind tunnel facility, containing this test section, provides a Mach number of approximately 1.54 at the test section entrance. Digitized shadowgraph flow visualization data are employed to visualize shock wave structure within the test section. These data are analyzed to determine shock wave unsteadiness characteristics, including grayscale spectral energy variations with frequency, as well as time and space correlations, which give coherence and time lag properties associated with perturbations associated …

Analysis Of Shock Wave Unsteadiness Using Space And Time Correlations Applied To Shadowgraph Flow Visualization Data, Shannon Marko, Phillip M. Ligrani

PRC-Affiliated Research

Unsteady flow characteristics of a normal shock wave, a lambda foot, and a separated turbulent boundary layer are investigated within a unique test section with supersonic inlet flow. The supersonic wind tunnel facility, containing this test section, provides a Mach number of approximately 1.54 at the test section entrance. Digitized shadowgraph flow visualization data are employed to visualize shock wave structure within the test section. These data are analyzed to determine shock wave unsteadiness characteristics, including grayscale spectral energy variations with frequency, as well as time and space correlations, which give coherence and time lag properties associated with perturbations associated …

Simulation Of Skull Fracture Due To Falls, Anthony Vicini, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

This study presents novel predictive equations for von Mises stress values of bones in the frontal and lateral regions of the skull. The equations were developed based on results of a finite element model developed during this research. The model was validated for frontal and lateral loading conditions with input values mimetic to fall scenarios. Using neural network processing of the information derived from the model achieved R2 values of 0.9990 for both the stress and deflection. Based on the outcome of the fall victims, a threshold von Mises stress of 40.9 to 46.6 MPa was found to indicate skull …

Anomalous Stranski-Krastanov Growth Of (111)-Oriented Quantum Dots With Tunable Wetting Layer Thickness, Christopher F. Schuck, Simon K. Roy, Trent Garrett, Paul J. Simmonds

Materials Science and Engineering Faculty Publications and Presentations

Driven by tensile strain, GaAs quantum dots (QDs) self-assemble on In_0.52Al_0.48As(111)A surfaces lattice-matched to InP substrates. In this study, we show that the tensile-strained self-assembly process for these GaAs(111)A QDs unexpectedly deviates from the well-known Stranski-Krastanov (SK) growth mode. Traditionally, QDs formed via the SK growth mode form on top of a flat wetting layer (WL) whose thickness is fixed. The inability to tune WL thickness has inhibited researchers’ attempts to fully control QD-WL interactions in these hybrid 0D-2D quantum systems. In contrast, using microscopy, spectroscopy, and computational modeling, we demonstrate that for GaAs(111)A QDs, we …

Autonomous Vehicle Interior Design, Nathaniel Torchalski

Honors Theses

As technology in the automotive industry advances and self-driving vehicles become more commercially available, design concepts for their interiors must also be developed. Research was conducted on automotive design and autonomous technology, drawing inspiration from production and concept vehicles of the past, present, and future. A survey was conducted to gauge possible consumer needs. Hand sketches, small-scale models, and a Computer-Aided Design (CAD) model was produced. A full-size model was developed using various material-forming processes, including 3D printing, woodworking, clay sculpting, and metal machining. The interior was designed with consideration for safety, comfort, and technological advancements to satisfy the needs …

A New Synthesized Microalloys Steel Ods Of High Amplitude Ultrasonically Irradiation, Marzuki Silalahi, Hanif Abdurrahman Wicaksana, Ferhat Aziz, Syahfandi Ahda, Mohamad Riza Iskandar

Makara Journal of Technology

Micropowders of oxide-dispersion-strengthened (ODS) steel have been synthesized using the ultrasonic irradiation method with variations in amplitude. The ultrasonic irradiation process is performed for 50 h at a frequency of 20 kHz with 40%, 50%, and 60% amplitudes in toluene solution. The formation of Fe-Cr microalloys in the preparation of Fe- 15Cr-0.5Y2O3 powder was analyzed using SEM-EDS, X-ray diffraction (XRD), and TEM-EDS. The percentage of Fe- Cr phase mass fraction of ODS steel micropowder formed during ultrasonic irradiation with 40%:50%:60% amplitude was 12.2%:34.1%:22.1%, with 25.67:77.02:38.51 nm crystallite size. The crystallite size at 50% amplitude was the largest, and the diffusion …

Optimizing On-Street Parking Supply With Analytical Models, Chawalit Tipagornwong

Dissertations and Theses

Commercial vehicles are crucial for the urban economy, but they generate negative impacts as well. This leads to restrictions such as a reduction in the number of loading zones. The result is that commercial drivers spend a significant amount of time searching for available loading zones. To avoid searching for parking, some commercial drivers double park, which causes traffic congestion. Therefore, the number of loading zones should be set properly. Since a curb is allocated between both loading zones and parking spaces, both parking types have to be considered. Many on-street parking management strategies have been implemented, including pricing meter …

The Challenges Facing Autonomous Vehicles And The Progress In Addressing Them, Garrett Johnson

Senior Honors Theses

Autonomous vehicles are an emerging technology that faces challenges, both technical and socioeconomic. This paper first addresses specific technical challenges, such as parsing visual data, communicating with other entities, and making decisions based on environmental knowledge. The technical challenges are to be addressed by the fields of image processing, Vehicle to Everything Communication (V2X), and decision-making systems. Non-technical challenges such as ethical decision making, social acceptance, and economic pushback are also discussed. Ethical decision making is discussed in the framework of deontology vs utilitarianism, while social acceptance of utilitarian autonomous vehicles is also investigated. Last, the likely economic impact is …

Comprehensive Inspection On The Experimental Ferritic Stainless Steel By Means Of Transmission Electron Microscopy And Neutron Diffraction Techniques, Parikin Parikin, Mohammad Dani, Riza Iskandar, Aziz Khan Jahja, Andon Insani, Joachim Mayer

Makara Journal of Technology

The field of physical metallurgy is one of the primary beacons that guide alloy developments for multipurpose materials such as the in-core structure materials for pressure vessel components and heat exchangers. The surface microstructure of new ferritic steel with significant local constituent materials was characterized by high resolution powder neutron diffractometer (HRPD) and transmission electron microscope (TEM), combined with the energy dispersive X-ray spectroscopy (EDX). The alloy contains73% Fe, 24% Cr, 2% Si, 0.8% Mn, and 0.1% Ni, in %wt. The charge materials were melted by the casting techniques. The neutron diffractograms obtained shows five dominant diffraction peaks at (110), …

Study On Antibacterial Of Chitosan/Hydroxyapatite Doped Magnesium Composite As A Material For Bone Graft Applications, Andromeda Dwi Laksono, Teodoro A. Amatosa, Jr., Hilda Pebrianti Octaviana Sitorus, Wentika Putri Kusuma Asih, Sulistijono Sulistijono

Makara Journal of Technology

Hydroxyapatite (HAp) is one of the constituent minerals of bone and teeth, that has been widely used for synthesizing bone graft. Due to the limitation on properties of the hydroxyapatite, it is doping with Magnesium (HAp-Mg). The addition of Chitosan (Chi) was expected to improve the antibacterial properties of HAp-Mg. The present research aims to study the influence of Chitosan with 0, 5, 15, and 25 wt% addition on biocompatibility properties of Chi/HAp-Mg composite. HAp-Mg was synthesized using the sol-gel method; meanwhile, Chi/HAp-Mg composite was manufactured by mixing Chitosan in acetic acid, and HAp-Mg was added into the mixture. The …

Evaluation Of Primal-Dual Splitting Algorithm For Mri Reconstruction Using Spatio-Temporal Structure Tensor And L1-2 Norm, Mia Rizkinia, Masahiro Okuda

Makara Journal of Technology

Magnetic resonance imaging (MRI) is an essential medical imaging technique which is widely used for medical research and diagnosis. Dynamic MRI provides the observed object visualization through time and results in a spatiotemporal signal. The image sequences often contain redundant information in both spatial and temporal domains. To utilize this characteristic, we propose a spatio-temporal reconstruction approach based on compressive sensing theory. We apply spatio-temporal structure tensor using nuclear norm, in addition to the wavelet sparsity regularization. The spatio-temporal structure tensor is a matrix that consists of gradient components of the MRI data w.r.t the spatial and temporal domains. For …

Influence Of Nh4f In Dextran Based Biopolymer Electrolytes: Conductivity And Electrical Analysis, Muhamad Hafiz Hamsan, Mohd Fakhrul Zamani Kadir, Shujahadeen Bakar Aziz, Muhammad Amirul Solihin Azha, Saifful Kamaluddin Muzakir

Makara Journal of Technology

Dextran polymer host was doped with different concentrations of ammonium fluoride (NH4F) via casting technique. In this present work, dextran-NH4F film has been employed to investigate the ionic conductivity using electrochemical impedance spectroscopy from 50 to 5 MHz. The highest room temperature conductivity is achieved at (2.33 ± 0.76) × 10-3 S cm-1 with 40 wt.% NH4F. The electrolyte is found to obey Arrhenius rule at high temperature with activation energy of 0.21 eV. Dielectric analysis has been performed to obtain better understanding on the conductivity pattern. The dielectric parameters e.g. ɛreal, ɛimag, Mreal, and Mimag have been tested as …

Acute Toxicitystudy Of Choline Based Ionic Liquids Towards Danio Rerio Fish And The Aggregation Behavior Of Their Binary Mixtures, Mansoor Ul Hassan Shah, Nasruddin Nasruddin, Suzana Bt Yusup, Muhammad Moniruzzaman

Makara Journal of Technology

Marine oil spills are effectively controlled by chemical dispersants. However, the toxicity associated with it reduce its employment in marine environment. To overcome this limitation, the acute toxicity of choline based ionic liquids was evaluated as a potential low toxic variant for oil spill remediation. Further, the aggregation behavior of the individual as well as their binary mixtures was also evaluated by employing tensiometry technique. The half-lethal concentration, LC50on zebrafish (Danio rerio) of three choline based ionic liquids showed that the studied ionic liquids (ILs) fall in the range of “practically nontoxic” ( 100-1000 mg L-1).Various micellar properties showed that …

Neutron Diffraction Study Of Multiferroic 0.6nife2o4/0.4batio3 Composite, Engkir Sukirman, Yosef Sarwanto, Syahfandi Ahda, Andon Insani

Makara Journal of Technology

Neutron diffraction study on the 0.6NiFe2O4/0.4BaTiO3 multiferroic composite has been carried out. The 0.6NiFe2O4/0.4BaTiO3 multiferroic composites have been synthesized by solid reaction method. In this study, 20 g of BaTiO3 (BTO) and 20 g of NiFe2O4 (NFO) compounds were prepared from the powder raw materials of BaO3 and TiO2 for BTO, and NiO and Fe2O3 for NFO. Furthermore, both BTO and NFO were each crushed for 5 hours using High Energy Milling (HEM). Then the BTO and NFO were calcined in the furnace at 950 °C/5 hours and 900 °C/5 hours, respectively. Both NFO and BTO precursors were manually mixed …

A Multi-Scale Approach To Study Biochemical And Biophysical Aspects Of Resveratrol On Diesel Exhaust Particle-Human Primary Lung Cell Interaction, Wei Zhang, Qifei Li, Mingjie Tang, Han Zhang, Xiaoping Sun, Sige Zou, Judy L. Jensen, Theodore G. Liou, Anhong Zhou

Biological Engineering Faculty Publications

Diesel exhaust particles (DEPs) are major air pollutants that lead to numerous human disorders, especially pulmonary diseases, partly through the induction of oxidative stress. Resveratrol is a polyphenol that ameliorates the production of reactive oxygen species (ROS) and delays aging-related processes. Herein we studied the cytoprotective effect of resveratrol on DEP-exposed human lung cells in a factorial experimental design. This work investigates biophysical features including cellular compositions and biomechanical properties, which were measured at the single-cell level using confocal Raman microspectroscopy (RM) and atomic force microscopy (AFM), respectively. Principal component analysis (PCA), hierarchical cluster analysis (HCA) and partial least square …

Mems 411: Improved Greens Harvester, Matthew Celentano, Nicholas Watts, Sam Friedrich, Ava Mennin

Mechanical Engineering Design Project Class

Earth Dance Organic Farm School has asked that we design an improved version of their “Quick-Cut” greens harvester. The redesign should be capable of cutting a 36 inch wide bed of greens, should roll on wheels, and should be able to operate for long periods without interruption. This report details the concept generation and selection phases of the project, wherein we elect to design the system with an aluminum extrusion frame, four- wheeled custom band saw system, and rope sweepers, among other key features. In the concept embodiment phase, we explore the features of our initial prototype and areas for …

Methodology Of Topology Optimization, Naziha Khandoker

Honors Theses

The need for lighter products is becoming increasingly essential as it cuts material cost and significant amount of weight, which is a key factor in the automotive and aerospace industries. Topology optimization allows us to achieve that by applying the concept to different structures with the goal of optimal distribution of material within finite volume design domain. Its algorithms selectively remove and relocate elements to achieve the optimum performance. This project performs a study on the effect of each design parameter over mechanical performance using Finite Element Analysis and applies it to set of wing attachment brackets. The optimized brackets …

Multiscale Modeling Of Fracture In Quasi-Brittle Materials Using Bifurcation Analysis And Element Elimination Method, Keyvan Zare Rami

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Analyzing the fracture of heterogeneous materials is a complex problem, due to the fact that the mechanical behavior of a heterogeneous material is strongly dependent on a variety of factors, such as its microstructure, the properties of each constituent, and interactions between them. Therefore, these factors must be effectively taken into account for accurate analysis, for which the multiscale method has been widely used. In this scheme, the computational homogenization method is used to obtain the effective macroscopic properties of a heterogeneous material based on the response of a Representative Volume Element (RVE). The growth of damage in an RVE …

Scatterometer Cross Calibration Using Volume Scattering Models For Amazon Rainforest Canopies, Evan Neil Chrisney

Theses and Dissertations

Spaceborne scatterometers have measured the normalized radar cross section (RCS) of the earth's surface for several decades. Two frequencies, C- and Ku-band, have been used in designing scatterometers, such as with the Ku-band NASA Scatterometer (NSCAT) and the C-band Advanced Scatterometer (ASCAT). The scatterometer data record between C- and Ku-band has been disjoint for several decades due to the difficulties in cross calibration of sensors that operate at different frequencies and incidence angles. A model for volume scattering over the Amazon rainforest canopy that includes both the incidence angle and frequency dependence is developed to overcome this challenge in cross …

Autonomous Vehicle Interior Design, Luis Vargas

Honors Theses

As technology in the automotive industry advances and self-driving vehicles become more commercially available, design concepts for their interiors must also be developed. Research was conducted on automotive design and autonomous technology, drawing inspiration from production and concept vehicles of the past, present, and future. A survey was conducted to gauge possible consumer needs. Hand sketches, small-scale models, and a Computer-Aided Design (CAD) model was produced. A full-size model was developed using various material-forming processes, including 3D printing, woodworking, clay sculpting, and metal machining. The interior was designed with consideration for safety, comfort, and technological advancements to satisfy the needs …

A-Step 2030 – New Research Project Presents A Picture Of The Skills Needed For Engineers To Solve The Sustainable Development Goals (Sdgs)., Una Beagon

Articles

Communication and Technical Skills will still be the most important attributes required of engineers in the future, according to a new study by the A-STEP 2030 Erasmus+ funded project. The project which is led by ENSTA Bretagne, France and has academic partners in TU Dublin, Metropolia University of Applied Sciences in Finland and Aalborg University in Denmark aims to develop innovative teaching approaches for engineering students which will attract a more diverse student body to the engineering profession.

Usu Alumni Develop Industry-Changing Aviation Technology | College Of Engineering, Utah State University

College of Engineering News

A pair of Utah State University alumni helped develop a new technology that will forever change aviation safety.

Effect Of Surface Roughness On Ultrasonic Inspection Of Electron Beam Melting Ti‐6al‐4v, Evan T. Hanks, Anthony N. Palazotto, David Liu

Faculty Publications

Experimental research was conducted on the effects of surface roughness on ultrasonic non-destructive testing of electron beam melted (EBM) additively manufactured Ti-6Al-4V. Additive manufacturing (AM) is a developing technology with many potential benefits, but certain challenges posed by its use require further research before AM parts are viable for widespread use in the aviation industry. Possible applications of this new technology include aircraft battle damage repair (ABDR), small batch manufacturing to fill supply gaps and replacement for obsolete parts. This paper aims to assess the effectiveness of ultrasonic inspection in detecting manufactured flaws in EBM-manufactured Ti-6Al-4V. Additively manufactured EBM products …