Engineering Commons^™

Feasibility Study Of Direct Application Of Two Deep And Dry Geothermal Wells For Heating The Buildings Of Moeil Village, Razieh Pourdarbani, Massomeh Alibaba, Mohsen Taghaddosi

Emirates Journal for Engineering Research

No abstract provided.

Rheo-Physical Characterization Of Microstructure And Flow Behavior Of Concentrated Surfactant Solutions, Eduard Caicedo Casso, Jason E Bice, Lisa R. Nielsen, Jessica L Sargent, Seth Lindberg, Kendra Erk

School of Materials Engineering Faculty Publications

Processing-relevant relationships between the microstructure and flow behavior of concentrated surfactant solutions were determined by a combination of basic rheological experiments, rheo-flow velocimetry tests, and flow birefringence measurements. The most common surfactant microstructures found in liquid soaps and other consumer care products—spherical, worm-like, and hexagonally packed micelles and lamellar structures—were recreated by varying the concentration of sodium laureth sulfate in water from 20 to 70 wt% and adding salt in some cases. It was found that common features of flow curves, such as power-law shear thinning behavior, resulted from a wide variety of material responses including shear-induced wall slip in …

Strength Of Steel-To-Steel Screw Connections -- Update To Provisions, Thomas Stevens, Thomas Sputo, Jennifer Bridge

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The objective of this project is to review the existing provisions of the AISI S100-16 North American Specification for Cold-Formed Steel Structural Members, for screw connections loaded in shear and tension (but not combined actions). A recent study by the Steel Deck Institute (Sputo 2017) revealed possible unconservative results for screw pull-over, particularly in thinner sheets and/or lower ductility.

This study performed a comprehensive analysis of available steel-to-steel screw connection strength test data, totaling 702 shear tests, 143 pull-over tests, and 335 pull-out tests. The tested strength of these connections was compared to the predicted strength from the existing …

Program And Proceedings: Nebraska Academy Of Sciences 1880–2019, 139th Anniversary Year, One Hundred-Twenty-Ninth Annual Meeting, April 12, 2019

Nebraska Academy of Sciences: Programs and Proceedings

Program

Aeronautics and Space Science

Collegiate Academy: Biology

Biological and Medical Sciences

Chemistry and Physics

Teaching and Learning the Dynamics of Cellular Respiration Using Interactive Computer Simulations Workshop

Life After College: Building Your Resume for the Future Workshop

Collegiate Academy: Chemistry and Physics

Aeronautics and Space Science, Poster Session

Maiben Memorial Lecture: David Swanson

Anthropology

Applied Science and Technology

Earth Science

Environmental Sciences

Teaching of Science and Math

Incorporation Of Egfr And Ron Receptors Into Nanodiscs, Cristina Flores-Cadengo

Biomedical Engineering ETDs

Understanding the structure-function relationship of membrane receptors is essential to comprehend the crosstalk between key signaling pathways. Aberrant trans-activation between receptors can lead to tumorigenesis. Two of these receptors known to be involved in cancer development are receptor tyrosine kinases (RTKs), RON (Recepteur d'Origine Nantais) and EGFR (Epidermal Growth Factor Receptor). There has been evidence of heterodimerization and crosstalk between these two receptors based on co-immunoprecipitation, however the structural requirements behind these interactions remain unknown. Structural studies could provide insights into these RTKs’ modes of dimerization and structure-function relationship. However, structural studies of full-length membrane proteins are often difficult due …

Restore-L Satellite Servicing Internship Final Report, Giovanni Campos

Publications and Research

This paper reviews the Restore-L mission purpose and the necessary research and simulations to meet mission specification for the Propellant Transfer Subsystem (PTS). It is essential the PTS undergoes functionality testing, environmental testing, and calculations to understand the capabilities of the system. For the testing of components from PTS, a proper test setup is required. It is vital for test hardware, such as hoses and valves, to stay in place while the test is being performed. For the test hardware to operate correctly, positioning, orientation, and alignment are critical as well. In addition to the testing, calculations for pressure drop …

Computational Prediction Of Host-Pathogen Protein Interactions Between Melioidosis Pathogen Burkholderia Pseudomallei And Human, Chathumadavi Ediriweera

Student Research Symposium

Background:

Burkholderia pseudomallei (Bp) is a critical biothreat agent, causes Melioidosis: a disease associated with high case-fatality rates in animals and humans; even with treatment, its mortaility is up to 50%. It also infects plants. Yet few effector proteins have been functionally characterized to date and little work has been carried out to understand the host-pathogen protein-protein interactions (PPI) which are important to develop efficient prevention measures. To address these issues, we deployed diverse in-silico methodologies to identify virulence factors and their interactions with host proteins to characterize bacterial infection mechanisms.

Fair Resource Allocation In An Mec-Enabled Ultra-Dense Iot Network With Noma, Qun Wang

Student Research Symposium

Ultra-dense Internet of Things (IoT) network has greatly facilitated the development of smart environments and the realization of diverse sophisticated applications. Power constrained and resource-limited IoT devices often need to perform computation-intensive and delay-sensitive tasks in such a network. Mobile edge computing and non-orthogonal multiple access are two promising techniques to address the corresponding challenges. In order to improve the fairness and resource efficiency among IoT users, resource allocation problems are formulated in ultra-dense MEC-enabled IoT networks with NOMA considered. An iterative algorithm based on successive convex approximation technique is proposed to solve those challenging non-convex problems.

The Santa Clara, 2019-04-11, Santa Clara University

The Santa Clara

No abstract provided.

Integrated: A Student's Guide To Systems Engineering, Hannah Smith

Research Horizons Day Posters

No abstract provided.

A Printed Wearable Dual-Band Antenna For Wireless Power Transfer, Mohammad Haerinia, Sima Noghanian

Electrical Engineering Faculty Publications

In this work, a dual-band printed planar antenna, operating at two ultra-high frequency bands (2.5 GHz/4.5 GHz), is proposed for wireless power transfer for wearable applications. The receiving antenna is printed on a Kapton polyimide-based flexible substrate, and the transmitting antenna is on FR-4 substrate. The receiver antenna occupies 2.1 cm2 area. Antennas were simulated using ANSYS HFSS software and the simulation results are compared with the measurement results.

Vibration-Based In-Situ Detection And Quantification Of Delamination In Composite Plates, Hanfei Mei, Asaad Migot, Mohammad Faisal Haider, Roshan Joseph, Md Yeasin Bhuiyan, Victor Giurgiutiu

Faculty Publications

This paper presents a new methodology for detecting and quantifying delamination in composite plates based on the high-frequency local vibration under the excitation of piezoelectric wafer active sensors. Finite-element-method-based numerical simulations and experimental measurements were performed to quantify the size, shape, and depth of the delaminations. Two composite plates with purpose-built delaminations of different sizes and depths were analyzed. In the experiments, ultrasonic C-scan was applied to visualize the simulated delaminations. In this methodology, piezoelectric wafer active sensors were used for the high-frequency excitation with a linear sine wave chirp from 1 to 500 kHz and a scanning laser Doppler …

Structural Health Monitoring Of Fiber-Reinforced Composite Using Wireless Magnetostrictive Sensors, Sujjatul Islam, Relebohile George Qhobosheane, Muthu Ram Prabhu Elenchezhian, Vamsee Vadlamudi, Rassel Raihan, Kenneth Reifsnider

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

Composite materials are extending the horizons of designers in all branches of engineering. These materials have numerous advantages and improved structural properties such as high strength to weight ratio, high stiffness to weight ratio, lightweight, structural strength, and excellent durability. This has led to their use in several applications i.e. automobile, aircraft, and military defense devices. However, these materials experience various types of deformations and damage modes during their service life that are at times challenging to detect. This has led to the development of various non-destructive methods for structural health monitoring (SHM) of the damages in these complex material …

A Review Of The Enhancement Of Bio-Hydrogen Generation By Chemicals Addition, Yong Sun, Jun He, Gang Yang, Guangzhi Sun, Valérie Sage

Research outputs 2014 to 2021

Bio-hydrogen production (BHP) produced from renewable bio-resources is an attractive route for green energy production, due to its compelling advantages of relative high efficiency, cost-effectiveness, and lower ecological impact. This study reviewed different BHP pathways, and the most important enzymes involved in these pathways, to identify technological gaps and effective approaches for process intensification in industrial applications. Among the various approaches reviewed in this study, a particular focus was set on the latest methods of chemicals/metal addition for improving hydrogen generation during dark fermentation (DF) processes; the up-to-date findings of different chemicals/metal addition methods have been quantitatively evaluated and thoroughly …

Information Technology News, Georgia Southern University

Information Technology: News & Publications (2012-2023)

• Geekend is April 26-27 in Savannah

Interaction-Aware Arrangement For Event-Based Social Networks, Feifei Kou, Zimu Zhou, Hao Cheg, Junping Du, Yexuan Shi, Pan Xu

Research Collection School Of Computing and Information Systems

No abstract provided.

Exploiting Wall Street: An Algorithmic Approach To Investing, Sterling Lemon

Student Research Symposium

Technology has advanced dramatically over the years, yet the old investment strategy of "buy and hold" has remained prevalent. While this strategy performed well historically, it serves as a stark contrast to modern investing which, by utilizing machine learning and advanced data analytics, is generating unprecedented returns This research project will demonstrate the strength behind algorithmic investing and how the investment strategy of "buy and hold" will become a thing of the past.

Propulsion Unit Optimization For Small Uas, Cory Goates

Student Research Symposium

Selection of a propulsion system for unmanned aerial vehicles (UAV) is a complex and iterative process. Attempts have been made to provide effective modelling of propulsion systems. However, due to the discrete nature of the design space, effective optimization tools have yet to be developed. We present an optimizer which presents designers with feasible propulsion systems based on given parameters. This optimizer also allows designers to view trend in the design space and more quickly determine an optimum solution.

Augmenting Anaerobic Digestion Of Microalgal Biomass, Anna Doloman

Student Research Symposium

Anaerobic digestion of microalgal biomass cannot be achieved without specialized hydrolytic microorganisms. Potentially algalytic bacteria belonging to Citrobacter and Alcaligenes species were isolated from a wastewater lagoon system. A combination of two potentially algalytic bacteria was successfully incorporated into the granular anaerobic consortia. A series of anaerobic cultures were prepared with different microbial combinations to test the methane production from algal biomass collected from a local wastewater treating trickling filter. The anaerobic microbial community mixed with two algalytic bacteria produced 10% more methane when compared to the methane produced by a native granular consortium. The presence of the algalytic bacteria …

Autonomous Watercraft Simulation And Programming, Nicholas J. Savino

Student Scholar Showcase

Automation of various modes of transportation is thought to make travel more safe and efficient. Over the past several decades, advances to semi-autonomous and autonomous vehicles have led to advanced autopilot systems on planes and boats, and an increasing popularity of self-driving cars. We predicted the motion of an autonomous vehicle using simulations in Python. The simulation models the motion of a small scale watercraft, which can then be built and programmed using an Arduino Microcontroller. We examined different control methods for a simulated rescue craft to reach a target. We also examined the effects of different factors, such as …

Robust Structured Group Local Sparse Tracker Using Convolutional Neural Network Features, Mohammadreza Javanmardi

Student Research Symposium

Sparse representation has recently been successfully applied in visual tracking. It utilizes a set of templates to represent target candidates and find the best one with the minimum reconstruction error as the tracking result. In this presentation, we propose a robust deep features-based structured group local sparse tracker, which exploits the convolutional neural network (CNN) features of local patches inside target candidates and represents them by a set of templates in the particle filter framework. To extract the local CNN features, we first set the size of each target candidate to 64 by 64 pixels to contain sufficient object-level information …

Mechanical And Tribological Behaviour Of Treated And Untreated Moringa Oleifera Pods Fiber Reinforced Epoxy Polymer Composite For Packaging Applications, Prakash Sampath, Senthil Kumar V.S Dr

Journal of Applied Packaging Research

Researchers now focus on the use of natural fiber polymer composites materials for packing applications. This attention is due to their low cost and renewable characteristics. Fabrication of composites with the use of renewable resources has many benefits of alternating from an appropriate management and reduction in industrial wastages, ecofriendly behaviour to cost effectiveness. The artificial fibers in packing industries can be replaced by natural fibers in the areas where stiffness and high strength are not the primary requirement. In the last decade the use of Natural fibers in the place of artificial fibers for reinforcements in epoxy resin matrix …

Development And Validation Of A Vibration-Based Sound Power Measurement Method, Cameron Bennion Jones

Theses and Dissertations

The International Organization for Standardization (ISO) provides no vibration-based sound power measurement standard that provides Precision (Grade 1) results. Current standards that provide Precision (Grade 1) results require known acoustic environments or complex setups. This thesis details the Vibration Based Radiation Mode (VBRM) method as one approach that could potentially be used to develop a Precision (Grade 1) standard. The VBRM method uses measured surface velocities of a structure and combines them with the radiation resistance matrix to calculate sound power. In this thesis the VBRM method is used to measure the sound power of a single-plate and multiple plate …

Formability Of A Hsas Based On Hot Processing Maps And Texture Analyses, Zhiqiang Yang, Ligang Liu, Tongguang Zhai, Chunmei Zhao, Hui Yu, Qiang Li

Chemical and Materials Engineering Faculty Publications

Aiming to improve the formability of a HSAS Docol 1500 Bor, hot processing maps were obtained based on Prasad, Babu and Murty instability criteria. The hot processing maps based on the above instability criteria are similar and the explanation of its similarity is given. Recrystallization and misorientation in typical quenched specimens were observed by using SEM with a EBSD system. It was found that the fraction values of HAGBs in quenched martensite are all below 0.4 under experimental conditions. Flow location bands occurs at lower deformation temperatures and higher strain rates. The textures in martensite mainly include ⟨110⟩ / / …

Probability Of Failure In Infrastructure Project Unbalanced Bidding, Yuhan Jiang, Yong Bai, Sisi Han, Ting Lin

Civil and Environmental Engineering Faculty Research and Publications

Design-Bid-Build infrastructure projects with Unit-Price Contracts have a high risk of quantity and price deviations. Those deviations might be the result of contractors' unbalanced bidding. At the same time, contractors' performance was unknown under unbalanced bidding situations. The researchers utilized the First Order Reliability Method and Statistical Analysis to evaluate contractors' bidding performances and engineers' estimating performances with bidding and settlement data of 163 NDDOT projects. Results showed that contractors adopted unbalanced bidding strategies as follows: if quantities were overestimated, then they underrated unit price; if quantities were underestimated, then they overrated unit price to maintain projects' Bid Total Amount …

The Influence Of Process Variables On Physical And Mechanical Properties In Laser Powder Bed Fusion, Joshua Robert Koepke, Bradley Jared, Yu-Lin Shen

Mechanical Engineering ETDs

Laser powder bed fusion additive manufacturing consists of a process that incorporates many process variables into fabricating parts. This study investigated several of these process variables and determined their influence on part properties. The process variables investigated include laser power, velocity, focus offsets, layer thickness, and powder particle size. Physical properties will be compared including surface roughness, form, and density. Tensile testing provided mechanical properties including unloading Young’s modulus, ultimate tensile strength, yield strength, uniform elongation, and ductility. Process maps will be developed that will provide recommendations for these process settings. It will be shown that these laser settings can …

Physical Constraints On Accuracy And Persistence During Breast Cancer Cell Chemotaxis, Julien Varennes, Hye-Ran Moon, Soutick Saha, Andrew Mugler, Bumsoo Han

Purdue University Libraries Open Access Publishing Fund

Directed cell motion in response to an external chemical gradient occurs in many biological phenomena such as wound healing, angiogenesis, and cancer metastasis. Chemotaxis is often characterized by the accuracy, persistence, and speed of cell motion, but whether any of these quantities is physically constrained by the others is poorly understood. Using a combination of theory, simulations, and 3D chemotaxis assays on single metastatic breast cancer cells, we investigate the links among these different aspects of chemotactic performance. In particular, we observe in both experiments and simulations that the chemotactic accuracy, but not the persistence or speed, increases with the …

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• TekLAN 46 | Technology event for gaming and technology enthusiasts

Biomechanical Foot Guidance Linkage, Carl Nelson, Cale J. Stolle, Judith M. Burnfield

Department of Mechanical and Materials Engineering: Faculty Publications

A gait replication apparatus can include a scalable mechanical mechanism configured to replicate different gaits . The scalable mechanical mechanism can include , for example , a four - bar linkage , a pantograph , a cam / Scotch - yoke mechanism , and so forth . In some embodiments , the mechanical mechanism includes a beam rotating about an axis passing proximate to its center , with a foot pedal slidably coupled with the beam , and a timing chain / belt or cable pulley - pair coupled with the foot pedal and looped about the beam . A …

Save Our Sound Obx, Inc. V. North Carolina Department Of Transportation, Mitch L. Werbell V

Public Land & Resources Law Review

The Fourth Circuit Court of Appeals recently ruled in favor of several governmental agencies seeking to construct a new bridge in the Pamlico Sound adjacent to North Carolina’s Outer Banks. For years, state and federal agencies have put forth a massive coordinated effort to address the constant weather damage and erosion which occurs to a section of North Carolina Highway 12. The court found the agencies properly cleared NEPA’s environmental review requirements for the bridge’s construction. Additionally, the opponent-litigants’ efforts to add claims challenging the project, based on new information about a shipwreck in the bridge’s path, were futile.