Engineering Commons^™

Recovery Of Water And Salt From Hyper-Saline Mine Water Using Freeze Crystallization, Clara Somerville

Chemical Engineering Undergraduate Honors Theses

The Freezerbacks researched, designed, and economically evaluated a full-scale freeze crystallization process as well as two alternative full-scale processes: 5 stage multiple effect evaporation and reverse osmosis. All three processes were designed to treat hyper-saline mine water that was sent into evaporation pond systems. These systems were designed for Freeport-McMoRan’s mines that need to treat impacted water.

The Freeport-McMoRan copper mine in Miami, Arizona was visited in order to gain insight about the problem. The mine is no longer actively mining copper and is in the process of reclaiming land used. An essential part of restoring the land is treating …

Removal And Reuse Of Phosphorus As A Fertilizer From Cafo Runoff, Kristin Moore

Chemical Engineering Undergraduate Honors Theses

Eutrophication is the process in which nutrient saturated waters promote algal blooms on the surface of the water. This limits the amount of dissolved oxygen content in the water, effectively limiting the range of species that can survive in a body of water. Concentrated animal feeding operations (CAFO) can contribute to this issue. The animals in a CAFO produce large amounts of nutrient-rich waste streams that can enter natural waterways if not properly managed and increase the problem of eutrophication. The ability to treat these waste streams and recover the excess nutrients would allow for not only the reduction of …

Scale Model And Flow Visualization Of Jack Rabbit Ii Chlorine Field Test, Charlotte Williams

Chemical Engineering Undergraduate Honors Theses

The release of hazardous gases, especially accidental releases, can have a major impact on the surrounding environment and population. The history of accidental hazardous gas releases is filled with plant destruction, civilian injury, and even death. Knowledge of how these gases travel and disperse once released can significantly lessen physical harm and improve emergency procedures. The Jack Rabbit II field test was conducted in pursuit of this knowledge for a chlorine release. In this field test, a purpose-built chlorine tank was surrounded by CONEX trailers assembled in the desert in Utah to model an urban setting. Multiple releases of chlorine …

Recovery Of Water And Salts From Hyper-Saline Mine Water Using Freeze Crystallization, Miriam Gonzalez

Chemical Engineering Undergraduate Honors Theses

In the mining industry, usage of large volumes of water enables mines to conduct multiple processes within one location. Hypersaline brine waters exit the processes of the mine to be utilized for other roles; some of these roles include leaching, recirculation, and extraction operations. These waters are highly concentrated with salt components and are released to different sections of the mine. The salts of highest concentration in the brine are aluminum sulfate and magnesium sulfate heptahydrate, along with low concentrations of many other elements. There are multiple ways to recover purified water from the brine solution: freeze crystallization, evaporative processes, …

Recovery Of Water And Salt From Hyper-Saline Mine Water Using Freeze Crystallization, Patsy Ann Dawson

Chemical Engineering Undergraduate Honors Theses

The Freezerbacks researched, designed, and economically evaluated a full-scale freeze crystallization process as well as two alternative full-scale processes: 5 stage multiple effect evaporation and reverse osmosis. All three processes were designed to treat hyper-saline mine water that was sent into evaporation pond systems. These systems were designed for Freeport- McMoRan’s mines that need to treat impacted water.

The Freeport-McMoRan copper mine in Miami, Arizona was visited in order to gain insight about the problem. The mine is no longer actively mining copper and is in the process of reclaiming land used. An essential part of restoring the land is …

Silver-Based Microbial Check Valve For Spacecraft Potable Water Systems, Scott Perry

Chemical Engineering Undergraduate Honors Theses

As human space exploration increases, the development of a more efficient potable water treatment system suited for spacecraft becomes crucial. This Waste-management Education Research Consortium (WERC) challenge was designed to explore the viability of microbial control through the utilization of silver ions as a biocide for possible integration into the Tranquility Node 3 water purification system aboard the International Space Station (ISS). Current systems using iodine risk causing hyperthyroidism from overexposure; however, silver can be safely ingested without this side effect. After researching silver delivery methods including electrochemical ion production, controlled release, or a combination of the two, our team …

Surface Immobilization Of Terpyridine Compounds, Elizabeth Hallett

Chemical Engineering Undergraduate Honors Theses

The deoxydehydration (DODH) of polyols to alkenes is a promising method of producing high-value chemical feedstocks from biomass-derived materials. Current catalytic systems for DODH require the use of costly reducing agents that generate stoichiometric amounts of chemical waste. Immobilizing catalysts on electrode surfaces using chemical linking groups eliminates the need for sacrificial reductants. In this work, glassy carbon electrodes were modified with 4’-(3,4-dihydroxyphenyl)-2,2’:6’,2’’-terpyridine to investigate o-benzoquinone as a potential linking group for DODH, and possibly for other reactions. Previous studies involving electrodes modified with quinone-containing compounds have primarily been focused on catalyzing the oxidation of NADH; the nature or …

Structural Design Guidelines For Pervious Concrete Pavements, April Smith

Civil Engineering Undergraduate Honors Theses

Pervious pavements have gained popularity in recent years as the transportation industry focuses on sustainability and environmental impact. This research investigated the structural design of pervious concrete pavements. There is no standard design method; therefore, the goal was to lessen ambiguity surrounding the use of pervious concrete for pavement structures. By characterization of the rigid pavement design equation from the 1993 AASHTO Structural Design Guide for Design of Pavement Structures through laboratory exploration and review of existing literature, a guide was created to assist engineers in the design of pervious concrete pavements.

Asphalt Concrete As A Flooring Material, Aleinys Villarreal

Civil Engineering Undergraduate Honors Theses

The need for having a good quality flooring has become something very important in order to enhance people’s spaces and living lifestyle. Some of the most common tile materials are cork, vinyl, concrete, and ceramic. While these four materials mentioned before are still capable materials, asphalt concrete has a distinct pattern that may be an attractive alternative to the standard tile types. To try and find solutions to these problems and give people another material option, asphalt concrete was evaluated as a flooring material.

The reason why asphalt concrete could have this new application is based on the outstanding properties …

The Influence Of Citric Acid On Setting Time And Temperature Behavior Of Calcium Sulfoaluminate-Belite Cement, Edgar Soriano

Civil Engineering Undergraduate Honors Theses

Today the need to opt for alternative cementitious materials is growing due to environmental reasons and construction time frames that portland cement cannot always satisfy. Calcium Sulfoaluminate (CSA) cements are a strong candidate to supplement or replace portland cement in the construction field for certain applications. In the United States, CSA cement has been limited mostly to pavement repairs because of its rapid initial setting time. The chemical compound responsible for this phenomenon is the alumina. This compound and sulfate are present in larger proportions compared to portland cement. The purpose of this research is to study how the use …

Tension Splitting Strength Of Bcsa Concrete Cylinders, Andrew Steven Deschenes

Civil Engineering Undergraduate Honors Theses

The focus of this research was to compare the tension splitting strength (TSS) of belitic calcium sufloaluminate (BCSA) cement concrete to tensile strength predicted by the American Concrete Institute (ACI) and to similarly proportioned portland cement (PC) concrete. BCSA is a rapid-setting cement with higher early strength, higher ettringite content, and lower calcium silicate hydrate (C-S-H) content than PC. PC and BCSA cement concrete cylinders were broken at different ages in both uniaxial compression and TSS. It was found that BCSA had a similar TSS to both the ACI prediction and PC TSS, but the results require further testing for …

Turbulent Effects On Building Pressure Using A Two-Dimensional Finite Element Program, Jonese Woods

Civil Engineering Undergraduate Honors Theses

Much of the knowledge about building aerodynamics today was obtained from physical testing like wind tunnel testing. Physical testing is time-consuming and very expensive. As a result, computational methods like the finite element method are being explored for use in building aerodynamics. Despite several years of research, there is still not a clear understanding of the peak pressure on buildings due to turbulence. Many of the research thus far has focused on comparing different computational methods. However, much work is needed in understanding the capability of the individual methods. In this work, a two-dimensional finite element program is used to …

Exploring The Compactability And Workability Of Rap, Elizabeth Poblete

Civil Engineering Undergraduate Honors Theses

Despite its economic and environmental benefits, the widespread use of Cold In-Place Recycling (CIR) is currently inhibited, to some degree, by a lack of laboratory testing and evaluation, specifically in the areas of compactability and workability of the reclaimed mixture stabilized with asphalt emulsion. The purpose of this study was to explore the influence of admixtures in CIR using modified Superpave Gyratory Compactor (SGC) compaction metrics. The primary stabilization technique considered in this research was asphalt emulsion, an application in which asphalt binder is suspended in water, allowing it to be stored and applied at ambient temperature, rather than the …

Micro-Ct-Based Approaches For Quantifying The Morphology Of Pulverized Char Particles, Scott Jorgensen, Simcha L. Singer

Mechanical Engineering Faculty Research and Publications

Morphological analysis of pulverized coal char particles using two-dimensional (2-D) cross-sectional imaging has been widely employed, but its accuracy has not been adequately assessed. In this study, pulverized coal char particles are imaged in three dimensions (3-D) using high-resolution X-ray microcomputed tomography (micro-CT). Particle volume, macropore volume, and macroporosity are measured in three dimensions and analyzed as a function of distance from the particle center using averaging at each radial location. A technique for extracting each particle’s average wall thickness, another morphological parameter used for classification, is also presented based on micro-CT imaging. When applied to pulverized bituminous coal char …

Debiasing The Human-Recommender System Feedback Loop In Collaborative Filtering, Wenlong Sun, Sami Khenissi, Olfa Nasraoui, Patrick Shafto

Faculty and Staff Scholarship

Recommender Systems (RSs) are widely used to help online users discover products, books, news, music, movies, courses, restaurants,etc. Because a traditional recommendation strategy always shows the most relevant items (thus with highest predicted rating), traditional RS’s are expected to make popular items become even more popular and non-popular items become even less popular which in turn further divides the haves (popular) from the have-nots (un-popular). Therefore, a major problem with RSs is that they may introduce biases affecting the exposure of items, thus creating a popularity divide of items during the feedback loop that occurs with users, and this may …

On-Demand Label Production, Robert A. Zimmerman

Master's Theses

The production and approval process for the various labels used in clinical trials wastes significant time and resources through the need to outsource label production or rely on large reams of pre-cut label stock for each revision throughout the process. An in-house, on-demand label printing and cutting system is a potential remedy to this waste. Previous work by Cheadle et al. resulted in a functional electomechanical prototype of the label cutting aspect of this research, capable of rudimentary linear cuts. In this continued research, emphasis was placed on improved label cutting capabilities and creating PC control software for label design. …

Effects Of Bio-Composites In Corrugated Sandwich Panels Under Edgewise Compression Loading, Jalen Christopher Mano

Master's Theses

Present day composite sandwich panels provide incredible strength. Their largest problem, however, is early bonding failure between the core and the skin. This is due to the low bonding surface area of present cores like honeycomb. Corrugated structures could provide a remedy for this with their much larger bonding surface area. Corrugated structures have extreme mechanical properties deeming them particularly useful in aerospace and automotive applications. However, previous research has shown that the stiffness of carbon fiber causes debonding and drastic failure when used as both a core and a skin. Bio-composites have properties that could strengthen the corrugated sandwich …

Comparison Of Lqr And Lqr-Mrac For Linear Tractor-Trailer Model, Kevin Richard Gasik

Master's Theses

The United States trucking industry is immense. Employing over three million drivers and traveling to every city in the country. Semi-Trucks travel millions of miles each week and encompass roads that civilians travel on. These vehicles should be safe and allow efficient travel for all. Autonomous vehicles have been discussed in controls for many decades. Now fleets of autonomous vehicles are beginning their integration into society. The ability to create an autonomous system requires domain and system specific knowledge. Approaches to implement a fully autonomous vehicle have been developed using different techniques in control systems such as Kalman Filters, Neural …

Central Valley Water Reclamation Facility: Food Waste Handling Improvements, Avery Holyoak, Todd Keniry, Benjamin Sandberg, Jade Snyder

Civil and Environmental Engineering

Central Valley Water Reclamation Facility (CVWRF), in Salt Lake City, Utah, utilizes a mesophilic anaerobic digestion system. CVWRF receives on average 52 million gallons per day (MGD) of wastewater and accepts 10,000 to 20,000 gal of liquid food waste daily. CVWRF produces energy from methane gas captured during anaerobic digestion of biosolids and food waste. The focus of this analysis is: 1) to optimize the performance of the anaerobic digestion system, 2) to evaluate the potential to increase the volume of food waste CVWRF accepts.

Flood Conveyance And Restoration Upper Reach Of The Logan River, Dani Delahoz, Briana Kistler, Dallen Webster, D. Willey

Civil and Environmental Engineering

Generations of residents in Logan, Utah have sought riverside property along the Logan River, leading to crowded development within the river’s natural floodplains. This is especially true in the Upper Reach, a 1.3-mile section between First Dam and Crockett Diversion (Figure 1).

Housing and yard development at the edge of the river has confined the water to a narrow, steeply-banked channel, increasing velocity, sediment scour, and degradation of river and riparian habitat. During extreme flow events, like the 100-year 24-hour flood, the river overtops its banks and flows into adjacent properties. Dam-induced sediment deficiencies and high velocities have led to …

Thermal Bowing Testing Of Precast Concrete Sandwich Wall Panels, Fray Pozo-Lora, Marc Maguire

Civil and Environmental Engineering Faculty Publications

Thermal bowing is out-of-plane wall deflection, which is a common issue on sandwich panel walls caused by a temperature differential between a building interior temperature and the environmental conditions.

This report aims to better understand thermal load response of concrete sandwich wall panels. Full-scale testing was performed to verify the assumptions regarding thermal gradient, temperature variation at the cross-section level and thermal conductivity of the connectors.

It was found out that carbon fiber reinforced polymer nor glass fiber reinforced polymer connectors transfer a significate amount of heat from one wythe to the other, hence, the temperature in one wythe remained …

University Of Rhode Island Course Information Assistant, Daniel Gauthier

Senior Honors Projects

Personal voice-interactive systems have become ubiquitous in daily life. There are many of these digital assistants such as Siri, Alexa, and Google Assistant. The chances are high you have access to one right now. This technology has reached a point where the context of a conversation can be maintained, which is a vast improvement over earlier technology. Interactions without conversational context can limit interactions greatly and this was the case for previous digital assistants. Every time someone would say something to an assistant, it was like they were constantly changing operators on a customer service line. The assistants can now …

Distributed Compressive Sensing Algorithm For Photoacoustic Tomography, Maha Abdulwahab Hassan Shehada

Electrical Engineering Theses

Biomedical imaging techniques are playing an essential role in diagnosing different kinds of diseases, which always motivates the search for improving their sensitivity and accuracy. Photoacoustic Tomography (PAT) is one of the most powerful techniques. PAT has many advantages as it is less expensive and faster than Magnetic Resonance Imaging (MRI). It combines the advantages of optical imaging and ultrasound imaging as it provides high contrast, high penetration, and high-resolution images for biological tissues. Also, it uses non-ionizing radiation which is very safe for human health. The main challenge in PAT is that human tissues can be exposed only to …

Optimization Of Low Salinity Water Flooding In Low Permeability Oil Reservoir, Yang Li

Chemical and Petroleum Engineering Theses

In recent decades, the demand of energy is growing sharply. Oil plays a very important role among all of the energy resources. Low permeability oil reservoirs classified as non conventional oil reservoirs and needs special techniques for oil recovery. The primary aim of this study is to select a proper technique for oil recovery of low permeability carbonate oil reservoir. Different carbonated and non-carbonated brines were employed in this project. Formation brine (17500 ppm), carbonate formation brine, sea water, low salinity water, carbonated sea water (50000 ppm), and carbonated low salinity brine (5000 ppm) were used in this work. Core …

Biofiltration Of Volatile Organic Compounds Emitted At Ethanol Plants, Christopher Arthur Duerschner

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Ethanol manufacturing is an important and growing sector in the biofuels marketplace. At ethanol plants, the control of volatile organic compound containing emissions from fermentation tanks and distillers dried grains with solubles driers is accomplished through the use of air scrubbers and regenerative thermal oxidizers. The operation of these control units imposes substantial operating costs for the ethanol plant. Biotrickling filters have the ability to replace scrubbers and regenerative thermal oxidizers resulting in significant economic and environmental benefits. Two biotrickling filters were operated in parallel under acetaldehyde loadings ranging from 4 to 136 gm^-3hr^-1. To examine …

Theoretical Model For Shields Diagram And Its Application, Jichao Jiang

Department of Environmental Engineering: Theses and Other Student Research

The transition from the condition of “no motion” to initial sediment moment, defined as sediment initiation, has been related to practical engineering (channel degradation, stable channel design), oceanographic (dredging, pipelines, cables), sedimentologic (sediment mobility, transport rates), geologic (the hydraulic interpretation of paleoenvironments), geochemical (pollutant transport), and gained considerable interest since nineteenth century.

Shields diagram for sediment initiation in terms of critical shear stress is a classic problem in sediment transport, but it is still an empirical law without a simple and practical theory despite extensive research since the 1930s. Hence, this research presents a simple theoretical model for critical shear …

Evaporator Modeling And An Optimal Control Strategy Development Of An Organic Rankine Cycle Waste Heat Recovery System For A Heavy Duty Diesel Engine Application, Dhruvang Rathod

All Dissertations

The Organic Rankine Cycle (ORC) has proven to be a promising technology for Waste Heat Recovery (WHR) systems in heavy duty diesel engine applications. However, due to the highly transient heat source, controlling the working fluid flow through the ORC system and maximizing the heat recovery is a challenge for real time application. To that end, this research resulted in the following main developments.

The first new development is in the area of heat exchanger modeling. The heat exchanger is a key component within the WHR system and it governs the dynamics of the complete ORC system. The heat exchanger …

From Trash To Treasure: The Impact Of Consumer Perception Of Bio-Waste Products In Closed-Loop Supply Chains, Ivan Russo, Ilenia Confente, Daniele Scarpi, Benjamin T. Hazen

Faculty Publications

Increasing efforts are made to convert waste into new materials for replacing “traditional” ones. In particular urban bio-waste represents a primary source of concern for both government and society. A new type of polyhydroxyalkanoates (PHA) have been very recently developed to convert food waste into a biodegradable multifunctional raw material to help solving the plastic waste problem. However, little is known about consumers' reactions to products made from PHA. Hence this study aims at understanding consumers' intentions to purchase, pay for, and switch to those bio-based products. Both multivariate analyses of variance and mediation analyses are run, addressing product involvement, …

Development Of A One-Equation Turbulence Model Based On K-Ε Closure And Its Extension For Computing Transitional Flows By Including An Intermittency Transport Equation, Cheng Peng

McKelvey School of Engineering Graduate Student Theses & Dissertations

No abstract provided.

Research Of Electro-Optical Effect In Metal Halide Perovskites By Fabry-Perot Interometer Method, Hanxiang Yin

McKelvey School of Engineering Graduate Student Theses & Dissertations

Perovskites have been investigated a lot by present and reported with outstanding optoelectronic properties. However, so far there is no publications about another important property, the electro-optical (EO) effect which is related to important applications in photolithography. This thesis is mainly mean to calculate the EO constants of one kind of organic perovskite material, CH₃NH₃PbI₃, which has been reported to have good capability of forming film by spin-coating, through the way of putting the film of CH₃NH₃PbI₃ between two layers of metal mirrors to build a Fabry-Perot interferometer and …