Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2019

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 2311 - 2340 of 10504

Full-Text Articles in Engineering

Low-Cost Open Source Ultrasound-Sensing Based Navigational Support For The Visually Impaired, Aliaksei Petsiuk, Joshua M. Pearce Aug 2019

Low-Cost Open Source Ultrasound-Sensing Based Navigational Support For The Visually Impaired, Aliaksei Petsiuk, Joshua M. Pearce

Michigan Tech Publications, Part 1

Nineteen million Americans have significant vision loss. Over 70% of these are not employed full-time, and more than a quarter live below the poverty line. Globally, there are 36 million blind people, but less than half use white canes or more costly commercial sensory substitutions. The quality of life for visually impaired people is hampered by the resultant lack of independence. To help alleviate these challenges this study reports on the development of a low-cost, open-source ultrasound-based navigational support system in the form of a wearable bracelet to allow people with the lost vision to navigate, orient themselves in their …

Go to article

Enzymatic Biofuel Cells In A Sandwich Geometry With Compressed Carbon Nanotubes/Enzyme Electrodes & Hybrid Patch Applications, Biao Leng Aug 2019

Enzymatic Biofuel Cells In A Sandwich Geometry With Compressed Carbon Nanotubes/Enzyme Electrodes & Hybrid Patch Applications, Biao Leng

Dissertations

Enzymatic biofuel cells (EBFCs) convert the chemical energy of biofuels, such as glucose and methanol, into electrical energy by employing enzymes as catalysts. In contrast to conventional fuel cells, EBFCs have a simple membrane-free fuel cell design due to the high catalytic specificity of the enzymes, but the power densities obtained are lower. Although the primary goal of research on EBFCs has been to develop a sustainable power source that can be directly implanted in the human body to power bio-devices, other applications such as the use of a flexible film or fuel cell patch as a wearable power source …

Go to article

Measurement Of Stresses And Their Effect On Transport In Thin Film Battery Electrodes, Subhajit Rakshit Aug 2019

Measurement Of Stresses And Their Effect On Transport In Thin Film Battery Electrodes, Subhajit Rakshit

Dissertations

At the moment, there is a significant push towards environmentally friendly energy production and gasoline-free transportation technologies. As a result, there is a renewed interest in energy storage devices such as lithium-ion batteries which will play a key role in providing energy storage capability for these applications. However, the current battery technology is reaching its limits and may not meet future energy storage demands. The increased demand and the limited lithium reserves in geographically remote areas of the earth will lead to higher cost of Li. The alternative battery technologies, such as sodium-ion batteries, are promising due to their low …

Go to article

Toward Realistic Nonstationarity Of Semidiurnal Baroclinic Tides In A Hydrodynamicmodel, Arin D. Nelson, Brian K. Arbic, Edward Zaron, Anna Savage, James G. Richman, Maarten C. Buijsman, Jay F. Shriver Aug 2019

Toward Realistic Nonstationarity Of Semidiurnal Baroclinic Tides In A Hydrodynamicmodel, Arin D. Nelson, Brian K. Arbic, Edward Zaron, Anna Savage, James G. Richman, Maarten C. Buijsman, Jay F. Shriver

Civil and Environmental Engineering Faculty Publications and Presentations

Semidiurnal baroclinic tide sea surface height (SSH) variance and semidiurnal nonstationary variance fraction (SNVF) are compared between a hydrodynamic model and altimetry for the low- to middle-latitude global ocean. Tidal frequencies are aliased by ∼10-day altimeter sampling, which makes it impossible to unambiguously identify nonstationary tidal signals from the observations. In order to better understand altimeter sampling artifacts, the model was analyzed using its native hourly outputs and by subsampling it in the same manner as altimeters. Different estimates of the semidiurnal nonstationary and total SSH variance are obtained with the model depending on whether they are identified in the …

Go to article

Targeted Germanium Ion Irradiation Of Aluminum Gallium Nitride/Gallium Nitride High Electron Mobility Transistors, Melanie E. Mace Aug 2019

Targeted Germanium Ion Irradiation Of Aluminum Gallium Nitride/Gallium Nitride High Electron Mobility Transistors, Melanie E. Mace

Theses and Dissertations

Microscale beams of germanium ions were used to target different locations of aluminum galliumnitride/gallium nitride (AlGaN/GaN) high electron mobility transistors (HEMTs) to determine location dependent radiation effects. 1.7 MeV Ge ions were targeted at the gap between the gate and the drain to observe displacement damage effects while 47 MeV Ge ions were targeted at the gate to observe ionization damage effects. Electrical data was taken pre, during, and post irradiation. To separate transient from permanent degradation, the devices were characterized after a room temperature anneal for at least 30 days. Optical images were also analyzed pre and post irradiation. …

Go to article

On The Pulsed Laser Ablation Of Metals And Semiconductors, Todd A. Van Woerkom Aug 2019

On The Pulsed Laser Ablation Of Metals And Semiconductors, Todd A. Van Woerkom

Theses and Dissertations

This dissertation covers pulsed laser ablation of Al, Si, Ti, Ge, and InSb, with pulse durations from tens of picosecond to hundreds of microseconds, fluences from ones of J/cm2 to over 10,000 J/cm2, and in ambient air and vacuum. A set of non-dimensional scaling factors was created to interpret the data relative to the laser and material parameters, and it was found that pulse durations shorter than a critical timescale formed craters much larger than the thermal diffusion length, and longer pulse durations created holes much shallower than the thermal diffusion length. Low transverse order Gaussian beams …

Go to article

Aerodynamic Centers Of Arbitrary Airfoils Below Stall, Douglas F. Hunsaker, Orrin D. Pope, Jeffrey D. Taylor, Josh Hodson Aug 2019

Aerodynamic Centers Of Arbitrary Airfoils Below Stall, Douglas F. Hunsaker, Orrin D. Pope, Jeffrey D. Taylor, Josh Hodson

Mechanical and Aerospace Engineering Student Publications and Presentations

The aerodynamic center of an airfoil is commonly estimated to lie at the quarter-chord. This traditional estimate is based on thin airfoil theory, which neglects aerodynamic and geometric nonlinearities. Even below stall, these nonlinearities can have a significant effect on the location of the aerodynamic center. Here, a method is presented for accurately predicting the aerodynamic center of any airfoil from known lift, drag, and pitching-moment data as a function of angle of attack. The method accounts for aerodynamic and geometric nonlinearities, and it does not include small-angle, small-camber, and thin-airfoil approximations. It is shown that the aerodynamic center of …

Go to article

Exercise-Induced Alterations In Sympathetic-Somatomotor Coupling In Incomplete Spinal Cord Injury, Tanya Onushko, Gordhan B. Mahtani, Gabrielle Brazg, T. George Hornby, Brian D. Schmit Aug 2019

Exercise-Induced Alterations In Sympathetic-Somatomotor Coupling In Incomplete Spinal Cord Injury, Tanya Onushko, Gordhan B. Mahtani, Gabrielle Brazg, T. George Hornby, Brian D. Schmit

Biomedical Engineering Faculty Research and Publications

The aim of this study was to understand how high- and low-intensity locomotor training (LT) affects sympathetic-somatomotor (SS) coupling in people with incomplete spinal cord injury (SCI). Proper coupling between sympathetic and somatomotor systems allows controlled regulation of cardiovascular responses to exercise. In people with SCI, altered connectivity between descending pathways and spinal segments impairs sympathetic and somatomotor coordination, which may have deleterious effects during exercise and limit rehabilitation outcomes. We postulated that high-intensity LT, which repeatedly engages SS systems, would alter SS coupling. Thirteen individuals (50 ± 7.2 years) with motor incomplete spinal cord injuries (American Spinal Injury Association …

Go to article

Initial Development Of A Prototype Sensor Testbed For Fetal Monitoring, Christian Beauvais Aug 2019

Initial Development Of A Prototype Sensor Testbed For Fetal Monitoring, Christian Beauvais

Theses and Dissertations

The objective of this research is to design and manufacture a device that exhibits some of the bio-physiological signals relevant to fetal health monitoring. Currently, limited options exist for testing the performance of monitoring devices such as the tocodynamometer (TOCO) and electrocardiograph (ECG) that measure the bio-physiological signals of a woman and her fetus. Sensor designers need ways of generating and acquiring signals that do not carry the ethical burden of human testing. The development of such a device, as considered in this work, may involve using muscle wire or an inflatable tube as prospective foundations for simulating uterine contraction. …

Go to article

An Optimal Design Of A Moving Target Defense For Attack Detection In Control Systems, Paul Griffioen, Sean Weerakkody, Bruno Sinopoli Aug 2019

An Optimal Design Of A Moving Target Defense For Attack Detection In Control Systems, Paul Griffioen, Sean Weerakkody, Bruno Sinopoli

Faculty Work Comprehensive List

In this paper, we consider the problem of designing system parameters to improve detection of attacks in control systems. Specifically, we study control systems which are vulnerable to integrity attacks on sensors and actuators. We aim to defend against strong model aware adversaries that can read and modify all sensors and actuators. Previous work has proposed a moving target defense for detecting integrity attacks on control systems. Here, an authenticating subsystem with time-varying dynamics coupled to the original plant is introduced. Due to this coupling, an attack on the original system will affect the authenticating subsystem and in turn be …

Go to article

Organic/Inorganic Interfacial Interactions Affecting Metal Reactivity: Water Treatment And Sensor Applications, Mohamed Nabil Shaikh Aug 2019

Organic/Inorganic Interfacial Interactions Affecting Metal Reactivity: Water Treatment And Sensor Applications, Mohamed Nabil Shaikh

Civil Engineering ETDs

The aim of this dissertation was to investigate the interactions occurring at the organic – inorganic interface between solid media and aqueous contaminants for water treatment and sensor applications. The gaps in current literature on these interfacial organic-inorganic interactions must be bridged in order to develop advanced water treatment and monitoring technologies for improving water quality and thus, restore and protect the contaminated water resources. As a part of this dissertation, manganese oxides-based composites and electrospun polymer mats were developed and investigated for gaining mechanistic insights of organic (bisphenol A and acetaminophen) and inorganic (uranium) contaminants removal, respectively. These reactions …

Go to article

Regulation Of Copper Surface Via Redox Reactions For Enhancing Carbon Dioxide Electroreduction, Bao-Hua Hang, Jin-Tao Zhang Aug 2019

Regulation Of Copper Surface Via Redox Reactions For Enhancing Carbon Dioxide Electroreduction, Bao-Hua Hang, Jin-Tao Zhang

Journal of Electrochemistry

A large-scale application of fossil fuels has led to excessive emission of carbon dioxide (CO2), resulting in serious environmental issues. A promising path to reducing CO2 emissions is recycling CO2 into valuable chemicals and fuels through an electrochemical process. Herein, the redox reactions between copper (Cu) and ferric chloride (FeCl3) have been utilized to regulate the Cu surface composition and structure, aimed to improve the electrocatalytic activity toward CO2 reduction. Typically, a series of samples (named Cu-1h, Cu-2h, Cu-3h and Cu-4h) were prepared via the redox reactions for various time from 1 to …

Go to article

Single-Layer Oxygen Deficiency Δ-Mno2 For Electrochemical Co2 Reduction, Yue-Feng Zhang, Jian-Jun Liu, Zeng-Xi Wei, Xin-Xin Tian, Jian-Min Ma Aug 2019

Single-Layer Oxygen Deficiency Δ-Mno2 For Electrochemical Co2 Reduction, Yue-Feng Zhang, Jian-Jun Liu, Zeng-Xi Wei, Xin-Xin Tian, Jian-Min Ma

Journal of Electrochemistry

Manganese dioxide (MnO2) has been widely used in catalysis. In addition, since the defect engineering can change the electronic properties of the catalyst, here we have systematically studied electrocatalytic carbon dioxide reduction reaction (CO2RR) on δ-MnO2 with and without oxygen deficiency, denoted as Ov-MnO2 and MnO2, respectively. We calculate the electronic properties and the intermediate of free energy for MnO2 and Ov-MnO2 with the help of spin-polarized density functional theory. By analyzing this result, we can find that the introduction of defects change the δ-MnO2 from semiconducting properties to …

Go to article

Statuses, Challenges And Strategies In The Development Of Low-Temperature Carbon Dioxide Electroreduction Technology, Xu-Rui Zhang, Xiao-Lin Shao, Jin Yi, Yu-Yu Liu, Jiu-Jun Zhang Aug 2019

Statuses, Challenges And Strategies In The Development Of Low-Temperature Carbon Dioxide Electroreduction Technology, Xu-Rui Zhang, Xiao-Lin Shao, Jin Yi, Yu-Yu Liu, Jiu-Jun Zhang

Journal of Electrochemistry

Low-temperature carbon dioxide (CO2) electrochemical reduction technology is a hotspot for research and development in recent years as a way to reduce the negative impact of CO2 on the environment and to generate energy storage through converting electricity to low-carbon fuels. Although basic research on catalyst activity, product selectivity, and reaction mechanism has been widely reported, the design and practicality of catalytic stability and corresponding electrochemical reactor systems have not been given sufficient attention and systematic development.  In this paper, two important factors affecting the development of CO2 electrochemical reduction technology in low temperature aqueous solution …

Go to article

Recent Advances In Bismuth-Based Co2 Reduction Electrocatalysts, Rui Zhou, Na Han, Yan-Guang Li Aug 2019

Recent Advances In Bismuth-Based Co2 Reduction Electrocatalysts, Rui Zhou, Na Han, Yan-Guang Li

Journal of Electrochemistry

Carbon dioxide (CO2) is an economical, secure and sustainable carbon resource around us. Its effective capture and recycling have been the focus of our entire society. Using the electrochemical method, CO2 can be reduced to different value-added chemicals or fuels. This approach not only would mitigate CO2 accumulation in the atmosphere, but also would help alleviate our dependence on fossil fuel. In this article, the basic principle and process of electrochemical CO2 reduction are first introduced. The recent development in bismuth-based catalysts for electrocatalytic CO2 reduction is reviewed with an emphasis on their preparation, …

Go to article

Electrocatalytic Reduction Of Carbon Dioxide To Carbon Monoxide Using Cobalt Nitride, Chen Ma, Peng-Fei Hou, Peng Kang Aug 2019

Electrocatalytic Reduction Of Carbon Dioxide To Carbon Monoxide Using Cobalt Nitride, Chen Ma, Peng-Fei Hou, Peng Kang

Journal of Electrochemistry

Electrocatalytic reduction of carbon dioxide (CO2) is a promising method to alleviate global warming issues, although it still faces many challenges. Herein, we report cobalt nitride for electrocatalytic reduction of CO2 to carbon monoxide (CO) in an aqueous electrolyte. A comparison of catalysts with different preparation temperatures and atmospheres suggests that nitrogen doping is critical to improve catalytic activity. For the most active catalyst of 700-Co5.47N/C, the CO current density reached 9.78 mA·cm-2 at potential of -0.7 V vs. RHE. In addition, the CO/H2 ratio could be adjusted from 1:3 to 3:2 by …

Go to article

Effect Of Morphology Of Fe-N Codoped Carbon Nanomaterial On Electrochemical Reduction Reactions, Er-Ling Li, Fa Yang, Ming-Bo Ruan, Ping Song, Wei-Lin Xu Aug 2019

Effect Of Morphology Of Fe-N Codoped Carbon Nanomaterial On Electrochemical Reduction Reactions, Er-Ling Li, Fa Yang, Ming-Bo Ruan, Ping Song, Wei-Lin Xu

Journal of Electrochemistry

Graphene nanosheets (GS) and carbon nanotubes have been considered as good catalysts candidates for applications in energy conversion and storage. However, hybrids of GS and carbon nanotubes are always formed in transition metal-based nitrogen-doped system, making the system quite complex for exploring the structure-activity relationship. To prepare the catalysts with desired species controllably, we try to adjust the outcomes with the effect of nitrogen on the growth of carbon nanotubes. In this work, a series of Fe-N co-doped carbon hybrid catalysts containing N-doped GS or hybrids of GS/bamboo carbon nanotubes (BCNTs) or BCNTs were obtained with one-step pyrolyzed method. To …

Go to article

Electrochemical Detection Of 4-Nitrophenol Based On Glassy Carbon Electrode Modified By Tio2Nps/Rgo Composite, Lin-Na Jiu, Yong-Qiang Cheng Aug 2019

Electrochemical Detection Of 4-Nitrophenol Based On Glassy Carbon Electrode Modified By Tio2Nps/Rgo Composite, Lin-Na Jiu, Yong-Qiang Cheng

Journal of Electrochemistry

4-nitrophenol (4-NP) has become factitious pollution, and presented a serious threat to the nature and human health. It is necessary to develop a convenient and fast detection method. In this work, the glassy carbon electrode modified by titanium dioxide nanoparticles (TiO2NPs)/reduced graphene oxide (RGO) composite as an electrochemical sensor was studied for the trace detection of 4-NP. The morphology of the composite was characterized by scanning electron microscopy (SEM). The homogeneous mixing of titanium dioxide nanoparticles and reduced graphene oxide increased the specific surface area of the composite, and facilitated the electrochemical reaction of 4-NP. The electrochemical characteristics …

Go to article

Preparations And Electrocatalytic Properties Of Cu-Bipy-Btc-Derived Carbon-Based Catalyst For Oxygen Reduction Reaction, Li-Hua Zhang, Jun-Feng Chen, Wan-Tang Huang, Yong-You Hu, Jian-Hua Cheng, Yuan-Cai Chen Aug 2019

Preparations And Electrocatalytic Properties Of Cu-Bipy-Btc-Derived Carbon-Based Catalyst For Oxygen Reduction Reaction, Li-Hua Zhang, Jun-Feng Chen, Wan-Tang Huang, Yong-You Hu, Jian-Hua Cheng, Yuan-Cai Chen

Journal of Electrochemistry

Efficient and low-cost oxygen reduction reaction (ORR) electrocatalyst plays a key role for fuel cells. In this paper, ORR active metal organic framework (MOF: Cu-bipy-BTC, bipy = 2,2?-bipyridine, BTC = 1,3,5-tricarboxylate) was prepared using hydrothermal method, and then carbon-based material MOF-800 was obtained from pyrolyzing Cu-bipy-BTC at 800 °C. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), nitrogen sorption isotherm and X-ray photolectron spectroscopy (XPS) were used to characterize the morphologies and structures of the catalysts. Linear sweep voltammetry (LSV) and current-time curve (i-t) were adopted to evaluate the electrocatalytic properties of the catalysts. The results …

Go to article

Reduction Of A Detailed Soot Model For Simulations Of Pyrolysing Solid Fuels, Alexander J. Josephson, Emily M. Hopkins, David O. Lignell, Rod R. Linn Aug 2019

Reduction Of A Detailed Soot Model For Simulations Of Pyrolysing Solid Fuels, Alexander J. Josephson, Emily M. Hopkins, David O. Lignell, Rod R. Linn

Faculty Publications

This work presents a computationally inexpensive soot formation model for use in simulating large solid-complex fuel systems. The proposed model evaluates three variables: number density of tars, bulk mass density of soot particles, and particle number density. Each of these variables are influenced by soot formation phenomena, and this model evaluates the most common of these phenomena: soot nucleation, surface reactions, and coagulation. Two separate simulations were carried out using this model and results were compared against simulations using a more detailed and computationally expensive model. Results are promising and show a meaningful reduction in model complexity and computational cost …

Go to article

Properties Of High Early-Strength Type V Cement Concrete For Rapid Repair, Nader Ghafoori, Matthew O. Maler, Meysam Najimi, Ariful Hasnat Aug 2019

Properties Of High Early-Strength Type V Cement Concrete For Rapid Repair, Nader Ghafoori, Matthew O. Maler, Meysam Najimi, Ariful Hasnat

Civil and Environmental Engineering and Construction Faculty Research

This study examines the suitability of ASTM Type V cement concrete for rapid repair applications. To this end, experimental results on transport and durability properties of high earlystrength concretes using ASTM Type V cement were compared with those of a more traditional cement used for rapid repair, i.e. Type III cement. A cement content of 445 kg/m3 (750 lb/yd3 ) was maintained for all studied concretes. The experimental program included compressive strength, absorption, rapid chloride migration, corrosion resistance, and mass loss due to freezing and thawing regimes. The results of this study revealed that use of Type III and V …

Go to article

Modifications Of The Cztse/Mo Back-Contact Interface By Plasma Treatments, Wenjin Chen, Teoman Taskesen, David Nowak, Ulf Mikolajczak, Mohamed H. Sayed, Devendra Pareek, Jorg Ohland, Thomas Schnabel, Erik Ahlswede, Dirk Hauschild, Lothar Weinhardt, Clemens Heske, Jurgen Parisi, Levent Gutay Aug 2019

Modifications Of The Cztse/Mo Back-Contact Interface By Plasma Treatments, Wenjin Chen, Teoman Taskesen, David Nowak, Ulf Mikolajczak, Mohamed H. Sayed, Devendra Pareek, Jorg Ohland, Thomas Schnabel, Erik Ahlswede, Dirk Hauschild, Lothar Weinhardt, Clemens Heske, Jurgen Parisi, Levent Gutay

Chemistry and Biochemistry Faculty Research

Molybdenum (Mo) is the most commonly used back-contact material for copper zinc tin selenide (CZTSe)-based thin-film solar cells. For most fabrication methods, an interfacial molybdenum diselenide (MoSe2) layer with an uncontrolled thickness is formed, ranging from a few tens of nm up to ≈1 μm. In order to improve the control of the back-contact interface in CZTSe solar cells, the formation of a MoSe2 layer with a homogeneous and defined thickness is necessary. In this study, we use plasma treatments on the as-grown Mo surface prior to the CZTSe absorber formation, which consists of the deposition of stacked metallic layers …

Go to article

Abrasion Resistance Of High Early-Strength Concrete For Rapid Repair, Nader Ghafoori, Matthew O. Maler, Meysam Najimi, Ariful Hasnat Aug 2019

Abrasion Resistance Of High Early-Strength Concrete For Rapid Repair, Nader Ghafoori, Matthew O. Maler, Meysam Najimi, Ariful Hasnat

Civil and Environmental Engineering and Construction Faculty Research

This paper examines the abrasion resistance of high early-strength concrete developed for rapid repair of highways and bridge decks. The cement types chosen for this study included ASTM Type III, ASTM Type V, and Calcium Sulfoaluminate (CSA) cements. A cement content of 386 kg/m3 (650 lb/yd3 ) was maintained for all studied concretes. Test samples were tested after 24 hours and 28 days of curing in order to evaluate compressive strength and depth of wear. Test results revealed that the opening time to attain minimum required compressive strength for CSA cement concrete was one hour, whereas the values for Type …

Go to article

Preface To Special Issue Of Electrochemical Reduction Of Carbon Dioxide, Qing Li, Min Liu Aug 2019

Preface To Special Issue Of Electrochemical Reduction Of Carbon Dioxide, Qing Li, Min Liu

Journal of Electrochemistry

No abstract provided.

Go to article

Copper-Based Compounds For Electrochemical Reduction Of Carbon Dioxide, Fan Yang, Pei-Lin Deng, You-Jia Han, Pan Jing, Bao-Yu Xia Aug 2019

Copper-Based Compounds For Electrochemical Reduction Of Carbon Dioxide, Fan Yang, Pei-Lin Deng, You-Jia Han, Pan Jing, Bao-Yu Xia

Journal of Electrochemistry

The electrochemical reduction of carbon dioxide (CO2) to useful chemicals and fuels has attracted enormous interest since the deteriorating global warming and energy shortage problems resulted from ever-increasing CO2 emission. Designing efficient catalysts is of capital significance to realize the efficient and selective conversion of CO2. Among various catalysts explored, copper-based compounds have promising potentials with acceptable efficiency for hydrocarbon production. Herein, recent advances on copper-based materials are summarized for electrochemical CO2 conversion. We intend to include the dimensional structure, different forms (alloy, oxide) and molecular catalysts in copper-based catalysts. Moreover, the reaction mechanisms …

Go to article

Recent Progress In Copper-Based Catalysts For Electrochemical Co2 Reduction, Wen Lei, Wei-Ping Xiao, De-Li Wang Aug 2019

Recent Progress In Copper-Based Catalysts For Electrochemical Co2 Reduction, Wen Lei, Wei-Ping Xiao, De-Li Wang

Journal of Electrochemistry

As the situation of energy crisis and environmental pollution become more and more serious, the electrochemical reduction of carbon dioxide (CO2) has attracted lots of attention because of its multiple meanings such as environment, resources and economic benefits. In this paper, the state of the art electrochemical reduction of CO2 in aqueous solution is reviewed, and the latest research progress in Cu-based catalysts with different structures and morphologies is summarized. In the end, the application prospects, opportunities and challenges of Cu-based materials are briefly presented to provide an outlook for future research directions.

Go to article

Mae Department Head Robert E. Spall Retires | College Of Engineering, Utah State University Aug 2019

Mae Department Head Robert E. Spall Retires | College Of Engineering, Utah State University

College of Engineering News

Robert E. Spall, former head of USU’s Department of Mechanical and Aerospace Engineering and a distinguished faculty member for nearly 23 years, retired from Utah State University College of Engineering this past May.

Go to article

Synthesis And Use Of Bio-Based Dielectric Substrate For Implanted Radio Frequency Antennas, Austin Tesser, Ala Alemaryeen, Jeremy Lewis, Ali Alshami, Meysam Haghshenas, Sima Noghanian Aug 2019

Synthesis And Use Of Bio-Based Dielectric Substrate For Implanted Radio Frequency Antennas, Austin Tesser, Ala Alemaryeen, Jeremy Lewis, Ali Alshami, Meysam Haghshenas, Sima Noghanian

Chemical Engineering Faculty Publications

Equipped with precision sensors/antenna modules combined with integrated processing and telemetry circuitry, wireless implants that are both biocompatible and biodegradable are important devices for monitoring patient's conditions and patient's safety. In this article we report on the development, design, and testing of a bio-based monopole radio frequency (RF) sensor/antenna module for potential use in human health applications. The module is built on a dielectric substrate biocomposite made of 0.5:1.0 ratio of polylactic acid (PLA) to sunflower carbon substrate (SCS) produced via pyrolysis of seeds shells. Findings for the SCS include optimized reactor yields around 7.9 wt.% at 500°C, a 0.27:1.0 …

Go to article

Methods For Estimating Supersaturation In Antisolvent Crystallization Systems, Jennifer M. Schall, Gerard Capellades, Allan S. Myerson Aug 2019

Methods For Estimating Supersaturation In Antisolvent Crystallization Systems, Jennifer M. Schall, Gerard Capellades, Allan S. Myerson

Henry M. Rowan College of Engineering Departmental Research

The mole fraction and activity coefficient-dependent (MFAD) supersaturation expression is the least-assumptive, practical choice for calculating supersaturation in solvent mixtures. This paper reviews the basic thermodynamic derivation of the supersaturation expression, revisits common simplifying assumptions, and discusses the shortcomings of those assumptions for the design of industrial crystallization processes. A step-by-step methodology for estimating the activity-dependent supersaturation is provided with focus on ternary systems. This method requires only solubility data and thermal property data from a single differential scanning calorimetry (DSC) experiment. Two case studies are presented, where common simplifications to the MFAD supersaturation expression are evaluated: (1) for various …

Go to article

Backhaul Profit Maximization Problem Instances, Yuanyuan Dong, Yulan Bai, Eli V. Olinick, Andrew Junfang Yu Aug 2019

Backhaul Profit Maximization Problem Instances, Yuanyuan Dong, Yulan Bai, Eli V. Olinick, Andrew Junfang Yu

Operations Research and Engineering Management

This archive contains data for the problem instances described in the technical report "An Empirical Study of Mixed Integer Programming Formulations of the Backhaul Profit Maximization Problem" by Yulan Bai and Eli V. Olinick.

Go to article

First Prev Next Last