Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2019

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 2221 - 2250 of 10504

Full-Text Articles in Engineering

Mitigating Reflective Cracking Through The Use Of A Ductile Concrete Interlayer, Qian Zhang, Mohammad Khattak, Adway Das Sep 2019

Mitigating Reflective Cracking Through The Use Of A Ductile Concrete Interlayer, Qian Zhang, Mohammad Khattak, Adway Das

Data

Corresponding data set for Tran-SET Project No. 18PLSU13. Abstract of the final report is stated below for reference:

"Reflective cracking is considered one of the most important issues that causes premature deterioration of composite pavements. Many types of mitigation methods have been studied in the past. However, they are either not effective in delaying the reflective cracking, or they only extend the service life by a few years. To address this critical issue and significantly extend the service life of the composite pavement, in this research, a ductile interlayer made of engineered cementitious composites (ECC) was proposed. It was hypothesized …


Development Of Geopolymer-Based Cement And Soil Stabilizers For Transportation Infrastructure, Miladin Radovic, Anand Puppala Sep 2019

Development Of Geopolymer-Based Cement And Soil Stabilizers For Transportation Infrastructure, Miladin Radovic, Anand Puppala

Data

Corresponding data set for Tran-SET Project No. 18CTAM03. Abstract of the final report is stated below for reference:

"Geopolymer Cement (GPC) has drawn much attention in the recent years as an alternative to Ordinary Portland Cement (OPC) for soil stabilization, pavements, bridges and other transportation structures due to their good mechanical properties in comparison to OPC. In addition, GPC can be processed at room temperatures from aqueous solutions of waste materials (e.g. fly ash) or abundant natural sources (e.g. clay), thereby significantly reducing CO2 production associated with processing of OPC. As such, GPC proves to be a more sustainable and …


Integrated Full-Scale Physical Experiments And Numerical Modeling Of The Performance And Rehabilitation Of Highway Embankments, Navid Jafari, Anand Puppala, Sayantan Chakroborty, Burak Boluk Sep 2019

Integrated Full-Scale Physical Experiments And Numerical Modeling Of The Performance And Rehabilitation Of Highway Embankments, Navid Jafari, Anand Puppala, Sayantan Chakroborty, Burak Boluk

Data

Corresponding data set for Tran-SET Project No. 18GTLSU06. Abstract of the final report is stated below for reference:

"The study aimed to fundamentally understand how soil strength and hydraulic properties are impacted by recurring cycles of wetting and drying induced by climate variability, with the practical implication of forecasting the stability of highway embankment slopes. The review of literature on the effects of long-term cyclic wetting-drying phases on hydro-mechanical properties of clayey soils suggests that only a few cycles of wetting and drying can impact the strength and hydraulic conductivity, where the latter can increase several orders of magnitude. Laboratory …


Combining Virtual Reality And Machine Learning For Enhancing The Resiliency Of Transportation Infrastructure In Extreme Events, Supratik Mukhopadhyay, Yimin Zhu, Ravindra Gudishala Sep 2019

Combining Virtual Reality And Machine Learning For Enhancing The Resiliency Of Transportation Infrastructure In Extreme Events, Supratik Mukhopadhyay, Yimin Zhu, Ravindra Gudishala

Data

Corresponding data set for Tran-SET Project No. 18ITSLSU09. Abstract of the final report is stated below for reference:

"Traffic management models that include route choice form the basis of traffic management systems. High-fidelity models that are based on rapidly evolving contextual conditions can have significant impact on smart and energy efficient transportation. Existing traffic/route choice models are generic and are calibrated on static contextual conditions. These models do not consider dynamic contextual conditions such as the location, failure of certain portions of the road network, the social network structure of population inhabiting the region, route choices made by other drivers, …


Performance Of Drilled Shaft Under Combination Of Complicated Loads Under Hurricane Event, Jie Huang, Sazzad Bin-Shafique Sep 2019

Performance Of Drilled Shaft Under Combination Of Complicated Loads Under Hurricane Event, Jie Huang, Sazzad Bin-Shafique

Data

Corresponding data set for Tran-SET Project No. 18GTTSA02. Abstract of the final report is stated below for reference:

"This project includes experimental and numerical studies to investigate and assess the impact of vertical loads on a laterally loaded drilled shaft under various conditions. The experimental study includes lab testing and lab-scale load test to examine a drilled shaft subjected to vertical and lateral loads at a reduced scale. With the data obtained from the lab-scale testing, a numerical model was calibrated, which was used to perform a parametric study to scrutinize the effect of many possible factors such as soil …


Strategies For Prioritizing Needs For Accelerated Construction After Hazard Events, Fernando Moreu, Chao Wang, Xinxing Yuan, Laleh Ghanbari, Claudia Garrido Sep 2019

Strategies For Prioritizing Needs For Accelerated Construction After Hazard Events, Fernando Moreu, Chao Wang, Xinxing Yuan, Laleh Ghanbari, Claudia Garrido

Data

Corresponding data set for Tran-SET Project No. 18PPLSU04. Abstract of the final report is stated below for reference:

"There is a need for rapid and responsive infrastructure repair and construction after natural disaster events such as hurricanes, wildfires, and tornadoes. These natural disasters often shut down basic infrastructure systems, as experienced recently in several Region 6 states as well as in other states around the country. Accelerated construction practices are often used in these situations to speed up the traditional, and often slow, project delivery process. However, after a natural disaster, several and different types of transportation infrastructure components are …


Toward Non-Corrosion And Highly Sustainable Structural Members By Using Ultra-High-Performance Materials For Transportation Infrastructure, Shih-Ho Chao, Ashish Karmacharya Sep 2019

Toward Non-Corrosion And Highly Sustainable Structural Members By Using Ultra-High-Performance Materials For Transportation Infrastructure, Shih-Ho Chao, Ashish Karmacharya

Data

Corresponding data set for Tran-SET Project No. 18STUTA01. Abstract of the final report is stated below for reference:

"This research focused on investigating a highly sustainable and efficient reinforced concrete structural member for future infrastructure by utilizing emerging high-performance materials. These materials include ultra-high-performance fiber-reinforced concrete (UHP-FRC) and corrosion-resistant high-strength fiber-reinforced polymer (FRP) bars. Four reduced scale UHP-FRC specimens were tested under large displacement reversals to prove the proposed new ductile-concrete strong-reinforcement (DCSR) design concept by fully utilizing these ultra-high-performance materials. Micro steel fibers were incorporated into three specimens and ultra-high molecular weight polyethylene fibers were blended into the fourth …


Investigations Of Point Defects In Kh2Po4 Crystals Using Ab Initio Quantum Methods, Tabitha E. R. Dodson Sep 2019

Investigations Of Point Defects In Kh2Po4 Crystals Using Ab Initio Quantum Methods, Tabitha E. R. Dodson

Theses and Dissertations

Potassium dihydrogen phosphate (KH2PO4, or commonly called KDP) crystals can be grown to large sizes and are used for many important devices (fast optical switches, frequency conversion, polarization rotation) for high powered lasers. The nonlinear optical material has a wide intrinsic transparency range. Intrinsic point defects are responsible for several short-lived absorption bands in the visible and ultraviolet regions that affect high-power pulsed laser propagation. The primary intrinsic defects have been experimentally detected in KDP using electron paramagnetic resonance (EPR) experiments. The defect models established thus far include (i) self-trapped holes, (ii) oxygen vacancies, and (iii) …


Effects Of Carbon-Based Ablation Products On Hypersonic Boundary Layer Stability, Olivia S. Elliott Sep 2019

Effects Of Carbon-Based Ablation Products On Hypersonic Boundary Layer Stability, Olivia S. Elliott

Theses and Dissertations

Hypersonic vehicles require an accurate prediction of the transition of the boundary layer for the design of the thermal protection system due to the high heating rates under turbulent flow. Many thermal protection systems are carbon-based and introduce new species, specifically CO2, into the boundary layer flow which are known to dampen the instabilities that lead to transition for hypersonic vehicles. A Computation Fluid Dynamics study was accomplished examining the concentration of CO2 required to impact boundary layer transition over both sharp and blunt cones. These results were used in conjunction with air-carbon ablation models models to …


Recycling Of The Mixture Resulted From Sanitary Ware Waste, Roller Kiln Waste And Ceramic Tiles Sludge Waste In The Manufacturing Of Ceramic Floor Tiles, Mai H. Roushdy Sep 2019

Recycling Of The Mixture Resulted From Sanitary Ware Waste, Roller Kiln Waste And Ceramic Tiles Sludge Waste In The Manufacturing Of Ceramic Floor Tiles, Mai H. Roushdy

Chemical Engineering

Ceramic tiles industry is a big source for wastes that have a bad effect on the environment. The first source of waste is associated with roller kilns as it needs a periodic surface grinding to its rollers which results in a waste powder. The second type of waste is ceramic tiles sludge which produced from a water treatment plant. The third waste is sanitary ware waste which coming out from sanitary ware industry. The main aim of this paper is to investigate the ability of substituting part of the main body mixture of floor tiles by these three types of …


Evaluating How The Quality Of Pedestrian Infrastructure Affects The Choice To Walk, Gregory Rowangould, Alexis Corning-Padilla Sep 2019

Evaluating How The Quality Of Pedestrian Infrastructure Affects The Choice To Walk, Gregory Rowangould, Alexis Corning-Padilla

Data

Corresponding data set for Tran-SET Project No. 18PPUNM02. Abstract of the final report is stated below for reference:

"While the benefits of walking are well understood, the physical design of sidewalks and their maintenance needs generally receive much less attention in both research and practice than the infrastructure used by other modes of transportation. As a result, we know comparatively little about how the design of sidewalks and quality of the overall pedestrian environment affect the decision to walk. In our study we conducted a household travel survey to collect data on walking frequency and attributes related to sidewalk quality …


Evaluation Of A 38 L Explosive Chamber For Testing Coal Dust Explosibility, Robert Eades, Kyle A. Perry Sep 2019

Evaluation Of A 38 L Explosive Chamber For Testing Coal Dust Explosibility, Robert Eades, Kyle A. Perry

Mining Engineering Faculty Research & Creative Works

Coal dust explosions are the deadliest disasters facing the coal mining industry. Research has been conducted globally on this topic for decades. The first explosibility tests in the United States were performed by the Bureau of Mines using a 20 L chamber. This serves as the basis for all standardized tests used for combustible dusts. The purpose of this paper is to investigate the use of a new 38 L chamber for testing coal dust explosions. The 38 L chamber features design modifications to model the unique conditions present in an underground coal mine when compared to other industries where …


2019 Safety Belt Usage Survey In Kentucky, Erin Lammers-Staats, Kenneth R. Agent, Eric R. Green Sep 2019

2019 Safety Belt Usage Survey In Kentucky, Erin Lammers-Staats, Kenneth R. Agent, Eric R. Green

Kentucky Transportation Center Research Report

The objective of the survey summarized in this report was to establish a statewide safety belt usage rate in Kentucky for 2019. This rate can be compared to those determined from previous surveys. The 2019 statewide survey documents the continued effect associated with law enforcement, related education, and general public attitude.


Investigation Of The Accuracy Of Alcohol And Drug Involvement Reporting, William Nicholas Staats Sep 2019

Investigation Of The Accuracy Of Alcohol And Drug Involvement Reporting, William Nicholas Staats

Kentucky Transportation Center Research Report

Executive Summary

Researchers compared the 2013 to 2017 fatal crash data from the KSP database to the crash data from the FARS database to check the consistency and accuracy of alcohol and drug involvement reporting for drivers in the KSP database. The indications of alcohol and drug involvement in the FARS database were used as the ground truth due to the inclusion of laboratory test results confirming the presence of alcohol and/or drugs in a driver’s system. For the five-year study period, the indications for alcohol involvement were 85.8% consistent and the indications of drug involvement were 66.2% consistent between …


Strong Circular Dichroism In Chiral Plasmonic Metasurfaces Optimized By Micro-Genetic Algorithm, Zhigang Li, Daniel Rosenmann, David A. Czaplewski, Xiaodong Yang, Jie Gao Sep 2019

Strong Circular Dichroism In Chiral Plasmonic Metasurfaces Optimized By Micro-Genetic Algorithm, Zhigang Li, Daniel Rosenmann, David A. Czaplewski, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Strong circular dichroism in absorption in the near-infrared wavelength range is realized by designing binary-pattern chiral plasmonic metasurfaces via the micro-genetic algorithm optimization method. The influence of geometric parameter modifications in the binary-pattern nanostructures on the circular dichroism performance is studied. The strong circular dichroism in absorption is attributed to the simultaneous excitation and field interference of the resonant modes with relative phase delay under linearly polarized incident light. This work provides a universal design method toward the on-demand properties of chiral metasurfaces, which paves the way for future applications in chemical and biological sensing, chiral imaging and spectroscopy.


The Influence Of Temperature On Dispersion Of Particles On Liquid Surfaces, Sathish Kumar Gurupatham, Valmiki Sooklal, A. Hensen, M. Conner Sep 2019

The Influence Of Temperature On Dispersion Of Particles On Liquid Surfaces, Sathish Kumar Gurupatham, Valmiki Sooklal, A. Hensen, M. Conner

Faculty Articles

It was shown recently that small particles and powders spontaneously disperse on liquid surfaces when they come in contact with the interface for the first time (Figure 2). This happens due to the combined effect of the capillary force, buoyant weight of the particle and the viscous drag that the particles experience when they encounter the liquid surface. The particles undergo oscillations normal to the interface before they come to the equilibrium position on the interface. These oscillations, in turn, induce a flow on the interface which disperses the particles radially outward. This phenomenon has a significant role in the …


Hybrid Structural Composites With Energy Harvesting Capabilities, Simon Furnes Sep 2019

Hybrid Structural Composites With Energy Harvesting Capabilities, Simon Furnes

Doctoral Dissertations and Master's Theses

Hybrid materials have received significant interest due to the potential enhancements they provide over traditional materials such as sensing, actuating, energy scavenging, thermal management, and vibration damping. While traditional materials can be utilized for either one of these functions or loadbearing, the hybrid materials are superior as they allow combination of a wide array of functionalities whilst being suitable for load-bearing purposes.

The goal of this thesis is to elucidate the synergistic effects of hybridization of two piezoelectric materials; zinc oxide nanowires (ZnO NWs) and thin film of lead zirconium titanate (PZT) on the mechanical and energy harvesting of beams …


Multimode Nonlinear Vibration Analysis Of Stiffened Functionally Graded Double Curved Shells In A Thermal Environment, Boutros Azizi Sep 2019

Multimode Nonlinear Vibration Analysis Of Stiffened Functionally Graded Double Curved Shells In A Thermal Environment, Boutros Azizi

Doctoral Dissertations and Master's Theses

The motivation of the current work is to develop a multi-modal analysis of the nonlinear response of stiffened double curved shells made of functionally graded materials under thermal loads. The formulation is based on the first order shear deformation shell theory in conjunction with the von Kármán geometrical nonlinear strain-displacement relationships. The nonlinear equations of motion of stiffened double curved shell based on the extended Sanders’s theory were derived using Galerkin’s method. The resulting system of infinite nonlinear ordinary differential equations, that includes both cubic and quadratic nonlinear terms, was solved using a nonlinear dynamic software XPPAUT to obtain the …


Thermal Bending, Buckling And Post-Buckling Analysis Of Unsymmetrically Laminated Composite Beams With The Effects Of Moisture And Geometric Imperfections, Claudia Barreno Sep 2019

Thermal Bending, Buckling And Post-Buckling Analysis Of Unsymmetrically Laminated Composite Beams With The Effects Of Moisture And Geometric Imperfections, Claudia Barreno

Doctoral Dissertations and Master's Theses

This thesis is concerned with the analytical study of the thermal bending, buckling, and post-buckling of unsymmetrically laminated composite beams with imperfection under hygrothermal effects. Three different boundary conditions will be considered on this study. The non-linear governing partial differential equations are derived by taking into account the von-Karman geometrical nonlinearity for an imperfect unsymmetrical laminated composite beam. Classical beam theory (CBT) as well as first order shear deformation theory (FSDT) will be used. The effects of temperature, angle of orientation, moisture variations, imperfection, and geometrical parameters, will be evaluated and discussed. Two different laminated composite laminates will be considered: …


Ion Software-Defined Radio Metadata Standard Final Report, Sanjeev Gunawardena, Alexander Rugamer, Muhammad Subhan Hameed, Markel Arizabaleta, Thomas Pany, Javier Arribas Sep 2019

Ion Software-Defined Radio Metadata Standard Final Report, Sanjeev Gunawardena, Alexander Rugamer, Muhammad Subhan Hameed, Markel Arizabaleta, Thomas Pany, Javier Arribas

Faculty Publications

The ION GNSS SDR Metadata Standard describes the formatting and other essential PNT-related parameters of sampled data streams and files. This allows processors to seamlessly consume such data without the need to input these parameters manually. The technical development phase of the initial version of the standard has now been deemed complete and is currently undergoing the last remaining procedural steps towards adoption as a formal standard by the Institute of Navigation. This paper reports on the activities of the working group since September 2018 and summarizes the final products of the standard. It also reports on examples of early …


Accounting For Temperature Effects On The Performance Of Soil Moisture Sensors In Sandy Soils, Michelle Schwartz, Zhen Li, Toshihiro Sakaki, Ali Moradi, Kathleen Smits Sep 2019

Accounting For Temperature Effects On The Performance Of Soil Moisture Sensors In Sandy Soils, Michelle Schwartz, Zhen Li, Toshihiro Sakaki, Ali Moradi, Kathleen Smits

Civil Engineering Faculty Publications - Archive

Capacitance sensors are widely used to monitor volumetric water content in both field and lab settings due to their low cost, ease of use, and capability of providing continuous measurements. However, these sensors are sensitive to temperature variations. Previous attempts to develop calibration equations that negate thermal effects incorporate many empirical constants that vary based on soil and sensor type. The purpose of this study is to examine the effects of temperature on sensor performance and develop an improved calibration equation for a widely used capacitance soil moisture/temperature sensor, the ECH2O 5TM. Small cell experiments were conducted with silica sands …


On The Potential, Feasibility, And Effectiveness Of Chat Bots In Public Health Research Going Forward, Stanley Mierzwa, Samir Souidi, Tammy Allen Sep 2019

On The Potential, Feasibility, And Effectiveness Of Chat Bots In Public Health Research Going Forward, Stanley Mierzwa, Samir Souidi, Tammy Allen

Center for Cybersecurity

This paper will discuss whether bots, particularly chat bots, can be useful in public health research and health or pharmacy systems operations. Bots have been discussed for many years; particularly when coupled with artificial intelligence, they offer the opportunity of automating mundane or error-ridden processes and tasks by replacing human involvement. This paper will discuss areas where there are greater advances in the use of bots, as well as areas that may benefit from the use of bots, and will offer practical ways to get started with bot technology. Several popular bot applications and bot development tools along with practical …


Investigation Of The Under-Body Flow Field Of A Prototype Long-Range Electric Vehicle, Matthew P. Nguyen Sep 2019

Investigation Of The Under-Body Flow Field Of A Prototype Long-Range Electric Vehicle, Matthew P. Nguyen

Master's Theses

This thesis presents changes to the design of the Prototype Vehicles Laboratory (PROVE Lab) Endurance Car, an electric car intended to break the Guinness World Record for the single-charge range of an electric vehicle. The design range is 1609.34 km, however at the design velocity of 104.6 kph, the drag is 196 N; which requires more battery capacity than the 100 kWh maximum of the baseline model. With a fixed frontal area, drag reduction can come from lowered velocity or reduced CD. CD reduction is attempted in four ways: side skirts between the fenders, a raised ride height, an elongated …


Discontinuous Galerkin Vs. Ie Method For Electromagnetic Scattering From Composite Metallic And Dielectric Structures, Y.-Y. Zhu, Q.-M. Cai, R. Zhang, X. Cao, Y.-W. Zhao, B. Gao, Jun Fan Sep 2019

Discontinuous Galerkin Vs. Ie Method For Electromagnetic Scattering From Composite Metallic And Dielectric Structures, Y.-Y. Zhu, Q.-M. Cai, R. Zhang, X. Cao, Y.-W. Zhao, B. Gao, Jun Fan

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, an efficient volume surface integral equation (VSIE) method with nonconformal discretization is developed for the analysis of electromagnetic scattering from composite metallic and dielectric (CMD) structures. This VSIE scheme utilizes curved tetrahedral (triangular) elements for volume (surface) modeling and the associated CRWG (CSWG) basis functions for volume current (surface) current modeling. Further, a discontinuous Galerkin (DG) volume integral equation (VIE) method and a DG surface integral equation (SIE) approach are adopted for dielectric and metallic parts, respectively, which allow both conformal and nonconformal volume/surface discretization improving meshing flexibility considerably. Numerical results are provided to demonstrate the accuracy, …


Influence Of Guayule Resin As A Bio-Based Additive On Asphalt-Rubber Binder At Elevated Temperatures, Ahmed Hemida, Magdy Abdelrahman Sep 2019

Influence Of Guayule Resin As A Bio-Based Additive On Asphalt-Rubber Binder At Elevated Temperatures, Ahmed Hemida, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study seeks to find the influence of replacing a portion of the asphalt–rubber binder with the bio-based material “guayule resin.” This replacement could be beneficial in terms of sustainability, economics, and environmental concerns related to the asphalt industry. Nine asphalt-rubber-guayule binders were investigated to find their rheological properties. Consecutively, the study proceeded with five selected binders being compared to the original asphalt (PG64-22). Investigations underwent whole matrices (crumb rubber modifier (CRM) residue included) and liquid phases (CRM residue extracted). Additionally, these properties were partially sought for their corresponding asphalt–rubber binders to compare and judge the contribution of the guayule …


Fkrr-Mvsf: A Fuzzy Kernel Ridge Regression Model For Identifying Dna-Binding Proteins By Multi-View Sequence Features Via Chou's Five-Step Rule, Yi Zou, Yije Ding, Jijun Tang, Fei Guo, Li Peng Sep 2019

Fkrr-Mvsf: A Fuzzy Kernel Ridge Regression Model For Identifying Dna-Binding Proteins By Multi-View Sequence Features Via Chou's Five-Step Rule, Yi Zou, Yije Ding, Jijun Tang, Fei Guo, Li Peng

Faculty Publications

DNA-binding proteins play an important role in cell metabolism. In biological laboratories, the detection methods of DNA-binding proteins includes yeast one-hybrid methods, bacterial singles and X-ray crystallography methods and others, but these methods involve a lot of labor, material and time. In recent years, many computation-based approachs have been proposed to detect DNA-binding proteins. In this paper, a machine learning-based method, which is called the Fuzzy Kernel Ridge Regression model based on Multi-View Sequence Features (FKRR-MVSF), is proposed to identifying DNA-binding proteins. First of all, multi-view sequence features are extracted from protein sequences. Next, a Multiple Kernel Learning (MKL) algorithm …


Experimental Investigation Into Utilizing Synthetic Jet Actuators To Suppress Bi-Modal Wake Behavior Behind An Ahmed Body, Daniel Jacob Baratta Sep 2019

Experimental Investigation Into Utilizing Synthetic Jet Actuators To Suppress Bi-Modal Wake Behavior Behind An Ahmed Body, Daniel Jacob Baratta

Master's Theses

Testing done on the flat-back Ahmed Body and other bluff bodies has shown the existence of a bi-stable reflectional symmetry-breaking wake at Reynolds numbers ranging from 340 to 2.41 x 106. Several methods of flow control, both active and passive, have been used to improve the efficiency of the Ahmed body but their effect on the bi-stable nature of the wake has not been investigated. This work details the experimental investigation done to determine if piezoelectrically driven synthetic jet actuators are capable of suppressing the bi-stable wake effects observed behind the Ahmed Body. The synthetic jets were designed …


Sequential Electrocoagulation-Electrooxidation For Virus Mitigation In Drinking Water, Joe Heffron, Donald R. Ryan, Brooke K. Mayer Sep 2019

Sequential Electrocoagulation-Electrooxidation For Virus Mitigation In Drinking Water, Joe Heffron, Donald R. Ryan, Brooke K. Mayer

Civil and Environmental Engineering Faculty Research and Publications

Electrochemical water treatment is a promising alternative for small-scale and remote water systems that lack operational capacity or convenient access to reagents for chemical coagulation and disinfection. In this study, the mitigation of viruses was investigated using electrocoagulation as a pretreatment prior to electrooxidation treatment using boron-doped diamond electrodes. This research is the first to investigate a sequential electrocoagulation-electrooxidation treatment system for virus removal. Bench-scale, batch reactors were used to evaluate mitigation of viruses in variable water quality via: a) electrooxidation, and b) a sequential electrocoagulation-electrooxidation treatment train. Electrooxidation of two bacteriophages, MS2 and ΦX174, was inhibited by natural organic …


Communication Of Recommendations For The Disposal Of Unused Prescription Opioid Medications By Stakeholders In The News Media, Megan Lynn Petrik, Patrick J. Mcnamara, Susan M. Moeschler, Benjamin D. Blair Sep 2019

Communication Of Recommendations For The Disposal Of Unused Prescription Opioid Medications By Stakeholders In The News Media, Megan Lynn Petrik, Patrick J. Mcnamara, Susan M. Moeschler, Benjamin D. Blair

Civil and Environmental Engineering Faculty Research and Publications

Objective

The opioid epidemic is a national public health emergency that requires a comprehensive approach to reduce opioid-related deaths. Proper and timely disposal of unused prescription opioids is one method to deter improper use of these medications and prevent overdose. The objective of this study was to understand how recommendations for disposing of unused prescription opioids, including both take-back programs and toilet disposal, are communicated to the public.

Methods

Two hundred sixty-three US newspaper articles published between January 1, 2014, and June 30, 2017, containing information on opioids and take-back programs were found using LexisNexis. Using content analysis, articles were …


Methane Yield And Lag Correlate With Bacterial Community Shift Following Bioplastic Anaerobic Co-Digestion, Kaushik Venkiteshwaran, Nicholas Benn, Saba Seyedi, Daniel Zitomer Sep 2019

Methane Yield And Lag Correlate With Bacterial Community Shift Following Bioplastic Anaerobic Co-Digestion, Kaushik Venkiteshwaran, Nicholas Benn, Saba Seyedi, Daniel Zitomer

Civil and Environmental Engineering Faculty Research and Publications

Past plastic management practices have resulted in pollution. An improved management scenario may involve adding used bioplastic to anaerobic digesters to increase methane for renewable energy. In this work, effects of polyhydroxybutyrate (PHB) bioplastic anaerobic co-digestion with synthetic primary sludge on operation and microbial communities were investigated. Co-digesters treating sludge were co-fed 20% untreated or pretreated (55 °C, pH 12) PHB. Pretreatment resulted in shorter lag (5 d shorter) before methane production increased after co-digestion. At steady-state, co-digesters converted 86% and 91% of untreated and pretreated PHB to methane, respectively. Bacterial communities were different before and after bioplastic co-digestion, whereas …