Engineering Commons^™

Surface Treatments For Concrete Under Physical Salt Attack, Mohamed Sakr, Mohamed T. Bassuoni

International Conference on Durability of Concrete Structures

Physical salt attack (PSA) is a key deterioration mechanism for concrete structures in contact with salt-rich media. Yet, procedures and techniques for protecting and repairing concrete affected by PSA are not adequately addressed in the technical literature. Therefore, in this study, three surface coatings of concrete were tested to determine their ability to withstand conditions stimulating to PSA. The treatments were selected to achieve either a single function such as acting as a membrane layer or hydrophobic agent, or combined pore blocking and water repelling functions. Coatings were applied on a concrete mixture typically used for residential foundations in Canada. …

Social Dimensions In Sustainability Evaluation Of Deteriorating Reinforced Concrete Bridges, Zhujun Wang, Weiliang Jin, Wu Kexian, Dan M. Frangopol

International Conference on Durability of Concrete Structures

Structural sustainability requires that structural engineering activities should find ways to design and maintain structures that perform as required during their life-cycle considering intergenerational needs. Massive attention has been paid to the economic and environmental evaluation of structures. However, being a completely different discipline from structural engineering, the social dimensions associated with structures were rarely considered in previous studies due to the difficulty in determination and quantification, unavoidable subjectivity and controversy, as well as the lack of historical data. This paper identifies the social impacts induced by engineering activities associated with the deterioration of reinforced concrete structures, and proposes corresponding …

A Novel Multiscale Modelling Approach For Evaluation Of The Asr In Concrete Structures, Mostafa Jalal, M Mirsayar, Anol Mukhopadhyay

International Conference on Durability of Concrete Structures

This paper presents a new multiscale approach for evaluation of the volume change in concrete structures due to the alkali-silica reaction (ASR). A practical step by step approach that can be applied to the real structures is developed based on combined experimental and numerical assessment by considering the most influential ASR parameters at different scales. In the first step, the ASR expansion is measured using accelerated concrete cylinder test (ACCT) for different concrete mixtures covering different variables of important factors such as mix design (e.g., w/cm, fly ash type and replacement percentages), aggregate reactivity, alkali loadings, temperature, and relative humidity …

Fem Analysis Of Structural Behaviour Of Reinforced Concrete Beam Under The Effect Of Frost Damage, Zhao Wang, Tamon Ueda, Hiroshi Hayashida, Dawei Zhang

International Conference on Durability of Concrete Structures

Minimizing frost damage is one of the important durability issues for concrete structures in cold and wet areas. This paper performed a Finite Element Model (FEM) analysis on the structural behavior of reinforced concrete beam under the effect of frost damage. The frost damage was considered as degradations in two constituents: concrete material and bond between concrete and reinforcement. The constitutive models of deteriorated concrete material were proposed using a mesoscale simulation approach (Rigid Body Spring Model). DIANA FEA program was adopted for the structural analysis and experiments were also conducted for the verification. It was clarified that the structural …

Establishment Of A Numerical Model For Sulfate Attacked Concrete Considering Multi-Factors, Shanshan Qin, Dujian Zou, Jun Jiang, Tiejun Liu

International Conference on Durability of Concrete Structures

Sulfate attack is one of the major durability problems of concrete structures, which is manifested by expansive cracks and deterioration of cement paste. In this study, a numerical model is proposed to predict the process of ionic diffusion into concrete under external sulfate attack. The chemical reaction and diffusion processes are considered in this model. Furthermore, the influence of calcium leaching, chemical activity of multi-ions, temperature and changes in porosity are also taken into account. The initial porosity and tortuosity are assumed to be homogeneous in concrete, and the chemical potential gradient is regarded as the driving force for ions …

Meso-Scale Fracture Modelling Of Concrete Cover Induced By Non-Uniform Corrosion Of Reinforcing Bar, Xun Xi, Shangtong Yang, Chun-Qing Li

International Conference on Durability of Concrete Structures

Corrosion-induced concrete cracking is a significant durability problem for reinforced concrete structures. In practice, critical corrosion degree to surface cracking and crack width evolution are of significance in regards to the assessment of serviceability of reinforced concrete structures. Literature review suggests that, although considerable research has been undertaken on corrosion-induced concrete cracking, little has been focused on non-uniform corrosion of reinforcing bar, especially by considering concrete as a three-phase materials. In this paper, a meso-scale fracture model, consisting of aggregates, cement paste/mortar and ITZ, is established. To simulate arbitrary cracking in concrete, cohesive elements are inserted in the fine meshes …

A New Model For Corrosion-Induced Concrete Cracking, Xun Xi, Shangtong Yang, Chun-Qing Li

International Conference on Durability of Concrete Structures

Corrosion of reinforced concrete is one of the major deterioration mechanisms which result in premature failure of the reinforced concrete structures. Due to the actual diffusion of chloride ingress, the corrosion products distribution is seldom uniform along the reinforcing bar. Recently, some non-uniform corrosion models have been proposed to investigate the corrosion-induced cracking mechanism of concrete. In this paper, a new corrosion model based on von Mises distribution is formulated and validated against experimental data. The developed model is then compared with the existing non-uniform models and the advantages are discussed. To demonstrate the application of the developed corrosion model, …

An Image-Based Local Homogenization Method To Model Mass Transport At The Steel-Concrete Interface, Zhidong Zhang Dr, Ueli Angst Prof, Alexander Michel Prof, Mads Jensen Dr

International Conference on Durability of Concrete Structures

Mass transport (moisture and ions) at the steel-concrete interface is closely related to corrosion of rebar in reinforced concrete structures. Thus, in the model simulating mass transport, the structure of the steel-concrete interface must be well represented. In this study, an image-based local homogenization method is proposed based on images taken in the scanning electron microscope (SEM) under the backscattered electron (BSE) detector. According to the gray level of the image, porosity can be calculated and then proposed equations are used to associate the transport properties (sorption isotherms, diffusion coefficients and permeability) with porosity. Experimental data of chloride concentration taken …

Residual Service Life Estimation And Its Importance For Pretensioned Concrete (Ptc) Bridges In Coastal Cities, Dyana Joseline, Deepak K. Kamde, Sripriya Rengaraju, Radhakrishna G. Pillai

International Conference on Durability of Concrete Structures

Many pre-tensioned concrete (PTC) bridges are experiencing premature chloride-induced corrosion. Hence, it is crucial to estimate their residual service life and update it with newer data on a periodic basis - to plan for corrosionpreventionorcontrolmeasuresandensuresafetyofexistingbridges.Criticalchloridethreshold(Cl th) is one of the parameters necessary to estimate the corrosion initiation period. However, quantitative estimates on Clth for prestressing (PS) steel are not well-reported in literature. This paper presents experimental data on the Clth of PS steel, the chloride diffusion coefficient (Dcl), and surface chloride concentration (Cs) of concrete samples obtained from a PTC bridge girder in a coastal city in India. For estimation …

Estimating Fractal Dimension Of Cement Matrix For Predicting Chloride Ingress Into Cement-Based Materials, Elakneswaran Yogarajah, Satoshi Yoshida, Akira Hatanaka, Toyoharu Nawa

International Conference on Durability of Concrete Structures

The durability performance of cement-based materials in service environments is affected by numerous factors, many of which involve attacks due to ionic transport, leading to reduced service life. The durability must be ensured in both an economically and environmentally responsible manner. Chloride-induced steel corrosion is a serious threat to the durability of reinforced concrete structures in marine environments, and the diffusion is the dominant transport mechanism of chloride ingress into concrete. Therefore, clear understanding of chloride transport mechanism, particular the diffusion path, is important for designing the durability performance of reinforced concrete structures. The purpose of this study is to …

Effect Of Time-Dependent Chloride Profile And Temperature Variation On Chloride Diffusion In Concrete, Feras Alsheet, A. Ghani Razaqpur

International Conference on Durability of Concrete Structures

Reinforcement corrosion due to chlorides diffusion is one of the main problems in reinforced concrete structures exposed to certain environments. The diffusion rate is function of chloride surface concentration, concrete temperature, humidity, composition and microstructure. The intruded chlorides are partially chemically bound by the concrete and it is the unbound or free chloride which upon exceeding a defined threshold initiates corrosion. The time to corrosion initiation depends on the above variables; therefore, it is important to model their spatial and temporal variations in a manner that will yield a realistic estimate of the actual initiation period. In this study, the …

Modelling Of Capillary Pore Structure Evolution In Portland Cement Pastes Based On Irregular-Shaped Cement Particles, Cheng Liu, Mingzhong Zhang, G Fang, Yun Bai, Y Zhang

International Conference on Durability of Concrete Structures

The pore structure plays a crucial role in durability performance of cement-based materials. However, the pore structure in cement pastes is highly dependent on the initial packing of cement particles and cement hydration process, which seems to be related to the shapes of cement particles. This paper proposed a numerical method to investigate the effect of cement particle shapes on capillary pore structures in cement pastes. In this study, irregular-shaped cement particles with various shapes are generated using a novel central growth model, and then incorporated into CEMHYD3D model to simulate Portland cement hydration. Some home-made programs of determining pore …

First Principles-Based Design Of Economical Ultra-High Performance Concrete, Aashay Arora, Matthew Aguayo, Farrokh Kianmofrad, Yiming Yao, Barzin Mobasher, Narayanan Neithalath

International Conference on Durability of Concrete Structures

This paper presents a novel strategy to design the binder phase of ultra-high performance concrete (UHPC) from commonly available cement replacement (fly ash, slag, microsilica, metakaolin) and fine filler (limestone) materials. A packing algorithm is used to extract the number density, mean centroidal distance, and coordination number of the microstructure. Similarly, rheological studies on the pastes provide yield stress, plastic viscosity, and mini-slump spread. The selection criteria involves using the three microstructural and three rheological parameters individually or in combination to define packing and flow coefficients. The selection criteria is flexible enough to allow users modify the constraints depending on …

Durability Design Of Segmental Linings For Intended Service Life Of Tunnels, Mehdi Bakhshi, Verya Nasri

International Conference on Durability of Concrete Structures

In one-pass lining systems, the durability of tunnel structure is directly related to durability of concrete segments acting as both the initial support and the tunnel final lining. In this paper, most-frequent degradation mechanisms of concrete linings are discussed including chloride- and carbonation- induced corrosions, sulfate, acid and freeze-and-thaw attacks, and alkali-aggregate reactions. Mitigation method for each specific degradation mechanism is explained. A durability factor specific to railway and subway tunnel known as stray current corrosion is presented. Mitigation methods for this specific corrosion together with coupling effects with other conventional damage mechanisms are explained. Prescriptive approaches for durability design …

Durability Design Based On Serviceability Stage For Corroded Reinforced Concrete Structures, Zhongxiaoping Zhongxiaoping, J Zhu, Cb Yuan, Wl Jin, J Xia

International Conference on Durability of Concrete Structures

After analyzing such factors as the structural durability failure state, environmental load and resistance, the durability limit state equation considering steel corrosion initiation, concrete cover cracking and maximum corrosion-induced damage value is established to meet its durability service life requirements under chloride environment. For three different durability limit states, the design theory of reliability, the partial factors of variables for load and resistance are introduced to reflect the target reliability requirements of structural durability, and subsequently the partial factors expression form of structural durability design is established. According to the principle of the same reliability level for partial factors design …

Performance Of Desiccant Enhanced Evaporative Cooling System Based On High-Low Control, Yi Chen, Huaxia Yan, Yimo Luo

Faculty of Science & Technology (THEi)

Desiccant enhanced evaporative cooling system is a sustainable air-conditioning (A/C) system which deals the latent load and sensible load separately by a dehumidifier and an evaporative cooler. A LDD-RIEC system consists of a liquid desiccant dehumidifier (LDD) and a regenerative indirect evaporative cooler (RIEC) were investigated. The LDD-RIEC system is characterized by low energy consumption compared with conventional mechanical cooling system, but the main shortcoming is the high dependency on ambient air conditions. To maintain stable indoor temperature, a control scheme is essential. However, very limited research work regarding control strategy can be found in open literatures. In this paper, …

Microarray Embedding/Sectioning For Parallel Analysis Of 3d Cell Spheroids., Jonathan Gabriel, David Brennan, Jennifer H Elisseeff, Vincent Beachley

Henry M. Rowan College of Engineering Departmental Research

Three-dimensional cell spheroid models can be used to predict the effect of drugs and therapeutics and to model tissue development and regeneration. The utility of these models is enhanced by high throughput 3D spheroid culture technologies allowing researchers to efficiently culture numerous spheroids under varied experimental conditions. Detailed analysis of high throughput spheroid culture is much less efficient and generally limited to narrow outputs, such as metabolic viability. We describe a microarray approach that makes traditional histological embedding/sectioning/staining feasible for large 3D cell spheroid sample sets. Detailed methodology to apply this technology is provided. Analysis of the technique validates the …

College Of Engineering Welcomes New Academic Advisor | College Of Engineering, Utah State University

College of Engineering News

USU’s College of Engineering welcomes new academic advisor Valerie Daines. She will provide advising services to mechanical engineering students with last names A through J.

Experimental Testing Of A 3d-Printed Metamaterial Slow Wave Structure For High Power Microwave Generation, Antonio B. De Alleluia

Electrical and Computer Engineering ETDs

A metamaterial (MTM) high power microwave (HPM) vacuum electron device (VED) was developed using 3D printing technology. The specific geometric pattern of the source can produce both negative permittivity and permeability to interact with a relativistic electron beam. The electron beam is generated using a pulsed electron accelerator with a maximum energy of 700 keV and lasting approximately 16 ns. The design of this novel VED consists of a circular waveguide loaded with complementary split-ring resonators in a linear periodic arrangement in which the relativistic beam travels guided by a magnetic field. The electrons interact with the MTM producing electromagnetic …

Algorithms For Multi-Objective Mixed Integer Programming Problems, Alvaro Miguel Sierra Altamiranda

USF Tampa Graduate Theses and Dissertations

This thesis presents a total of 3 groups of contributions related to multi-objective optimization. The first group includes the development of a new algorithm and an open-source user-friendly package for optimization over the efficient set for bi-objective mixed integer linear programs. The second group includes an application of a special case of optimization over the efficient on conservation planning problems modeled with modern portfolio theory. Finally, the third group presents a machine learning framework to enhance criterion space search algorithms for multi-objective binary linear programming.

In the first group of contributions, this thesis presents the first (criterion space search) algorithm …

Document Layout Analysis And Recognition Systems, Sai Kosaraju

Master of Science in Computer Science Theses

Automatic extraction of relevant knowledge to domain-specific questions from Optical Character Recognition (OCR) documents is critical for developing intelligent systems, such as document search engines, sentiment analysis, and information retrieval, since hands-on knowledge extraction by a domain expert with a large volume of documents is intensive, unscalable, and time-consuming. There have been a number of studies that have automatically extracted relevant knowledge from OCR documents, such as ABBY and Sandford Natural Language Processing (NLP). Despite the progress, there are still limitations yet-to-be solved. For instance, NLP often fails to analyze a large document. In this thesis, we propose a knowledge …

Physicochemical Properties Of Blend Poly (Vinyl Alcohol) And Sodium Alginate Membranes For Potential Application In Wound Dressings, Martha Pieper

Mechanical Engineering Theses

Poly (vinyl alcohol) (PVA) and sodium alginate (SA) are water-soluble polymers with excellent biocompatibility suitable for biomedical applications in wound dressings. In this study, pure PVA, pure SA, and blends of PVA/SA membranes were solvent cast into films followed by crosslinking in CaCl₂, boric acid, and a mixture of CaCl₂/boric acid solutions for 5, 10, and 30 minutes. Initial feasibility studies showed a strong correlation of film thickness to the observed mechanical properties. Further studies in solvent casting of blend PVA/SA films, using various polymer concentrations, yielded better film appearance with minimal physical changes after crosslinking. …

Evaluation Of The Rheological Behaviors And Molecular Composition Properties Of Crumb Rubber Modified Emulsion For Chip Seal, Md Tanvir Ahmed Sarkar

LSU Master's Theses

An experimental study was conducted to characterize the chemical, molecular, and rheological properties of different asphalt emulsions including a newly introduced tire rubber modified asphalt emulsion. One tire rubber modified asphalt emulsion (CRS-2TR), two conventional emulsions (CRS-2 and CRS-2P), and one asphalt rubber binder (AC20-5TR) were evaluated. The differences in functional groups, chemical composition, and molecular weight distribution of the asphalt binder and emulsions under different aging conditions (Original, RTFO-aged, and PAV-aged) were evaluated by the Saturates, Aromatics, Resins and Asphaltenes (SARA) fractionation test, High-Pressure Gel Permeation Chromatography (HP-GPC), and Fourier Transform Infrared Spectroscopy (FTIR) test, respectively. Superpave Performance Grade …

Demand Response Management In Smart Grid Networks: A Two-Stage Game-Theoretic Learning-Based Approach, Pavlos Athanasios Apostolopoulos

Electrical and Computer Engineering ETDs

In this diploma thesis, the combined problem of power company selection and Demand Response Management in a Smart Grid Network consisting of multiple power companies and multiple customers is studied via adopting a distributed learning and game-theoretic technique. Each power company is characterized by its reputation and competitiveness. The customers who act as learning automata select the most appropriate power company to be served, in terms of price and electricity needs’ fulfillment, via a distributed learning based mechanism. Given customers' power company selection, the Demand Response Management problem is formulated as a two-stage game theoretic optimization framework, where at the …

Combined Molecular Dynamics And Phase Field Simulation Of Crystal Melt Interfacial Properties And Microstructure Evolution During Rapid Solidification Of Ti-Ni Alloys, Sepideh Kavousi

LSU Doctoral Dissertations

Phase field method has become a popular tool to investigate the microstructure evolution during the solidification. Quantitative predictions using this method is still limited, and in this dissertation, we try to study this problem from different perspectives.

Most of the phase field models consider the solid-liquid interface to be in local equilibrium. Solidification during some manufacturing processes like selective laser melting, and electron beam additive manufacturing is rapid and far from equilibrium which can result in supersaturated solid solutions, segregation-free crystals, or metastable phases. Before obtaining any conclusions from the phase field simulations, we must know the answer for “which …

Mechanical Characterization Of Additively Manufactured Inconel 625 And Alsi10mg Via High-Throughput Tensile Testing, Aron Robbins

Mechanical Engineering ETDs

Additive manufacturing allows for the development of complex geometrical designs that may otherwise be impossible to fabricate through common methods. This advantage has opened the door to a new testing method capable of rapid and efficient material property characterization and qualification. The technique exhibits how 100’s of sub-size tensile bars can be tested to show an inherent statistical variation of materials produced by laser powder bed fusion. The testing technique presented is used to evaluate various heat treatments of the nickel super-alloy Inconel 625 and the aluminum alloy AlSi10Mg after stress relief annealing. Statistical analysis using 3-parameter Weibull distributions is …

Why The Crackling Deformations Of Single Crystals, Metallic Glasses, Rock, Granular Materials, And The Earth’S Crust Are So Surprisingly Similar, Karin A. Dahmen, Jonathan T. Uhl, Wendelin J. Wright

Faculty Journal Articles

Recent experiments show that the deformation properties of a wide range of solid materials are surprisingly similar. When slowly pushed, they deform via intermittent slips, similar to earthquakes. The statistics of these slips agree across vastly different structures and scales. A simple analytical model explains why this is the case. The model also predicts which statistical quantities are independent of the microscopic details (i.e., they are "universal"), and which ones are not. The model provides physical intuition for the deformation mechanism and new ways to organize experimental data. It also shows how to transfer results from one scale to another. …

Personality Prediction Through Curriculam Vitae Analysis Involving Password Encryption And Prediction Analysis, Gagandeep Kaur, Shruti Maheshwari

Library Philosophy and Practice (e-journal)

A recruitment process requires an eligibility check, an aptitude evaluation and a psychometric analysis of prospective candidates. The work puts forward an application where the system allows employers to post new job offerings and registered candidates can apply. The application estimates applicant’s emotional aptitude through a psychometric analysis based on a test whereas the professional standard is verified via a technical aptitude test. OCEAN Model is used to assess emotional quotient and predict the personality traits. Machine learning techniques such as Logistic Regression are used for modelling the personality predictor. The details of the candidates are kept secure by using …

Aspect And Opinion Aware Abstractive Review Summarization With Reinforced Hard Typed Decoder, Yufei Tian, Jianfei Yu, Jing Jiang

Research Collection School Of Computing and Information Systems

In this paper, we study abstractive review summarization. Observing that review summaries often consist of aspect words, opinion words and context words, we propose a two-stage reinforcement learning approach, which first predicts the output word type from the three types, and then leverages the predicted word type to generate the final word distribution. Experimental results on two Amazon product review datasets demonstrate that our method can consistently outperform several strong baseline approaches based on ROUGE scores.

Measurement Of Antibacterial Properties Of Foil‑Backed Electrospun Nanofibers, Mary Ann Wagner-Graham, Herbert Barndt, Mark Andrew Sunderland

College of Life Sciences Faculty Papers

Current methodologies for evaluation of antibacterial properties of traditional textiles are not applicable to foil‑backed, poorly‑absorbent electrospun nanofiber materials, since existing test methods require absorbent fabrics. Since electrospun nanofibers are adhered to the foil backing only by electrostatic interactions, methods used to evaluate antibacterial properties of surfaces cannot be used because these protocols cause the nanofibers to lift from the foil backing. Therefore, a novel method for measurement of the antibacterial properties of electrospun metallic foil‑backed nanofiber materials was developed. This method indicated that acetate‑based nanofibers manufactured to contain 5 to 30 weight percent of cold‑pressed hemp seed oil or …