Engineering Commons^™

Fuzzy Support Vector Machine Based On Hyperbolas Optimized By The Quantum-Inspired Gravitational Search Algorithm, Feng Ni, Yuzhu He, Fei Jiang

Turkish Journal of Electrical Engineering and Computer Sciences

Fuzzy support vector machines (FSVMs) are known for their excellent antinoise performance, but there is no general rule when the fuzzy membership function (FMF) is set up. A novel FSVM based on hyperbolas optimized by the quantum-inspired gravitational search algorithm (QGSH-FSVM) is proposed to handle this question. In the proposed QGSH-FSVM, the FMF is defined by two disparate hyperbolas, whose eccentricities are optimized by the quantum-inspired gravitational search algorithm. A variable called diversity, revealing the percentage of a sample in different classes, is proposed to distinguish outliers or noises from valid samples. Experimental results confirm that the QGSH-FSVM is able …

Bandwidth Allocation For Multiple Iptv Users Sharing The Same Link: A Case Study Of Telecom Of Kosovo, Arianit Maraj, Adrian Shehu, Dardan Maraj, Ruzhdi Sefa

Turkish Journal of Electrical Engineering and Computer Sciences

Almost all operators today are facing constant requests for multiple video services in a single household. In these situations, video services have to compete for finite network bandwidth and other equipment resources. Each of them requires different bandwidth capacities. This dynamic behavior can jeopardize both quality of service and quality of experience. One should keep in mind that some video channels require more bandwidth than others. Telecom of Kosovo (TK) is facing the same issues. The encoders at TK are not scalable and they treat all video streams equally, without taking into consideration the fact that some video streams require …

Effect Of Uniform And Dolph-Chebyshev Excitations On The Performance Of Circular Array Antennas, Mohan Kachalai Narasimman, Yogesh Kumar Choukiker, Srinivasa Rao Zinka, Kannadassan Dhanaraj

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents the design and simulation of microstrip circular antenna arrays and studies the effect of excitation with uniform and Dolph--Chebyshev distribution. With side lobe level of 20 dB and 8 microstrip circular patches, the circular array has been demonstrated with minimum grating lobes. The effects of patch and antenna array length on directivity, radiation patterns, and side lobe are also studied in detail. It is found that these antenna arrays are suitable for radar application.

A Longitudinal Study Of Middle Eastern Women’S Experiences Studying Engineering Abroad: Emerging Results, Shannon Chance, Bill Williams, Allison Wagner

Conference papers

What is it like to study engineering in Ireland when you are female and you come from somewhere far away, in the Middle East, which has different social customs and norms? What is the lived experience? What aspects of the experience are common to all Middle Eastern women enrolled in your course? As education researchers, we aim to understand the essence of the experience such women have had studying engineering Ireland; we focus on what life has been like for them and what unique challenges they have faced that may be invisible to us as instructors. In this work-in-progress, a …

Assessing Peer Review By Gauging The Fate Of Rejected Manuscripts: The Case Of The Journal Of Artificial Societies And Social Simulation, Niccolò Casnici, Francisco Grimaldo, Nigel Gilbert, Pierpaolo Dondio, Flaminio Squazzoni

Articles

This paper investigates the fate of manuscripts that were rejected from JASSS-The Journal of Artificial Societies and Social Simulation, the flagship journal of social simulation. We tracked 456 manuscripts that were rejected from 1997 to 2011 and traced their subsequent publication as journal articles, conference papers or working papers. We compared the impact factor of the publishing journal and the citations of those manuscripts that were eventually published against the yearly impact factor of JASSS and the number of citations achieved by the JASSS mean and top cited articles. Only 10% of the rejected manuscripts were eventually published in a …

Effect Of Sky Clearness Index On Transmission Of Evacuated (Vacuum) Glazing, Aritra Ghosh, Brian Norton, Aidan Duffy

Articles

Glazing transmittance variation with clearness index has higher influence than incident angle for soar energy application. This work presents variation of vacuum glazing transmittance with clearness index. Clearness index and transmittance was calculated from measured one year (2014) solar radiation and glazing transmittance data in Dublin, Ireland. Clearness index below 0.5 offer single value of transmittance whereas above 0.5 clearness index glazing transmittance varies with clearness index. For different azimuthal orientation, clearness index associated with vertical plane glazing transmittance has been proposed. In Dublin for south facing vertical plane, vacuum glazing has 35% transmittance below 0.5 clearness index. Yearly usable …

Developing Historic Building Information Modelling Guidelines And Procedures For Architectural Heritage In Ireland, Maurice Murphy, A. Corns, John Cahill, K. Eliashvli, Alain Chenaux, C. Pybus, R. Shaw, G. Devlin, A. Deevy, L. Truong-Hong

Articles

Cultural heritage researchers have recently begun applying Building Information Modelling (BIM) to historic buildings. The model is comprised of intelligent objects with semantic attributes which represent the elements of a building structure and are organised within a 3D virtual environment. Case studies in Ireland are used to test and develop the suitable systems for (a) data capture/digital surveying/processing (b) developing library of architectural components and (c) mapping these architectural components onto the laser scan or digital survey to relate the intelligent virtual representation of a historic structure (HBIM). While BIM platforms have the potential to create a virtual and intelligent …

Smart Motorway Innovation For Achieving Greater Safety And Hard Shoulder Management, Nicola Callaghan, Thomas Avery, Mark Mulville

Conference papers

"Smart" motorways are becoming more prevalent through technology-driven approaches such as active traffic management (ATM) systems, hard shoulder management (HSM) control systems and digital enforcement cameras. Such technologies are able to monitor and respond to fluctuating traffic conditions by altering the speed limit to smooth traffic flow, activate warning signs to alert users of hazards up ahead and permit the use of the hard shoulder, either permanently or at peak times. This paper investigates smart motorways as a way of reducing congestion achieving greater road safety and improving hard shoulder management. This research is one of the first which deals …

S-Visibility Problem In Vlsi Chip Design, Marzieh Eskandari, Mahdieh Yeganeh

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, a new version of very large scale integration (VLSI) layouts compaction problem is considered. Bar visibility graph (BVG) is a simple geometric model for VLSI chip design and layout problems. In all previous works, vertical bars or other chip components in the plane model gates, as well as edges, are modeled by horizontal visibilities between bars. In this study, for a given set of vertical bars, the edges can be modeled with orthogonal paths known as staircases. Therefore, we consider a new version of bar visibility graphs (BsVG). We then present an algorithm to solve the s-visibility …

Photoluminescence Of Lead Sulfide Quantum Dots Of Different Sizes In A Nanoporous Silicate Glass Matrix, Aleksandr P. Litvin, Anton Babaev, Peter Parfenov, Elena Ushakova, Mikhail Baranov, Olga Andreeva, Kevin Berwick, Anatoly Fedorov, Alexander Baranov

Articles

The optical properties of lead sulfide quantum dots (QDs) of different sizes embedded in a nanoporous silicate glass matrix (NSM) are investigated by steady-state and transient photoluminescence spectroscopy. The use of this matrix allows the fabrication of samples with reproducible optical characteristics, for both isolated and close-packed QDs. Low-temperature PL analysis of isolated QDs with sizes of 3.7 and 4.5 nm shows that the coefficient of temperature shift of the PL position changes sign with reducing QD size because of size-dependent contributions from thermal expansion, mechanical strain, and electron–phonon coupling. The PL intensity is determined by size-dependent splitting of the …

Time-Varying And Constant Switching Frequency-Based Sliding-Mode Control Methods For Transformerless Dvr Employing Half-Bridge Vsi, Hasan Komurcugil, Samet Biricik

Articles

This paper presents time-varying and constant switching frequency based sliding-mode control (SMC) methods for three-phase transformerless dynamic voltage restorers (TDVRs) which employ half-bridge voltage source inverter. An equation is derived for the time-varying switching frequency. However, since the time-varying switching frequency is not desired in practice, a smoothing operation is applied to the sliding surface function within a narrow boundary layer with the aim of eliminating the chattering effect and achieving a constant switching frequency operation. The control signal obtained from the smoothing operation is compared with a triangular carrier signal to produce the pulse width modulation signals. The feasibility …

The Role Of The Dendritic Growth Models Dimensionality In Predicting The Columnar To Equiaxed Transition (Cet), M. Seredynski, Marek Rebow, J. Banaszek

Articles

The dendrite tip kinetics model accuracy relies on the reliability of the stability constant used, which is usually experimentally determined for 3D situations and applied to 2D models. The paper reports authors` attempts to cure the situation by deriving 2D dendritic tip scaling parameter for aluminium-based alloy: Al-4wt%Cu. The obtained parameter is then incorporated into the KGT dendritic growth model in order to compare it with the original 3D KGT counterpart and to derive two-dimensional and three-dimensional versions of the modified Hunt’s analytical model for the columnar-to-equiaxed transition (CET). The conclusions drawn from the above analysis are further confirmed through …

The Electrochemical Deposition Of Zn-Mn Coating From Choline Choloride-Urea Deep Eutectic Solvent, Mihael Bucko, David Culliton, Tony Betts, Jelena Bajat

Articles

Electrochemical and microscopic techniques were used for characterization of Zn˗Mn coatings electrodeposited from choline chloride˗urea deep eutectic solvent. Cyclic voltammograms show that there was no discernible Mn reduction peak when only Mn2+ was present in DES solution. The distinct Mn peak developed only upon addition of Zn2+ to the solution, probably due to previous Zn nucleation on the steel substrate. It was found that 22-27 wt.% Mn, was deposited at current densities of 3-8 mA cm-2, amounts significantly higher than in aqueous electrolytes. Since higher deposition current densities resulted in the formation of a porous surface consisting of clusters of …

Determination Of Reliable Fatigue Life Predictors For Magnetorheological Elastomers Under Dynamic Equi-Biaxial Loading, Yangen Zhou, Liang Jiang, Shaojuan Chen, Jianwei Ma, Tony Betts, Stephen Jerrams

Articles

Fatigue life prediction is of great significance in ensuring magnetorheological elastomer (MRE) based rubber components exhibit reliability and do not compromise safety under complex loading and this necessitates the development of plausible fatigue life predictors for MREs. In this research, silicone rubber based MREs were fabricated by incorporating soft carbonyl iron magnetic particles. Equi-biaxial fatigue behaviour of the fabricated MREs was investigated by using the bubble inflation method. The relationship between fatigue life and maximum engineering stress, maximum strain and strain energy density were studied. The results showed that maximum engineering stress and stored energy density can be used as …

Ann-Based Shepwm Using A Harmony Search On A New Multilevel Inverter Topology, Fayçal Chabni, Rachid Taleb, M'Hamed Helaimi

Turkish Journal of Electrical Engineering and Computer Sciences

This article presents the application of the harmony search (HS) optimization algorithm for selective harmonic elimination PWM (SHEPWM) in a new topology of multilevel inverters with reduced number of electronic switching elements. The main objective of the harmonic elimination strategy is eliminating undesired low-rank harmonics in order to improve the quality of the output waveform. The harmonic elimination strategy is achieved by solving a system of nonlinear equations. In this paper harmony search optimization is applied using artificial neural networks (ANNs) on a new 21-level inverter topology. The algorithm is based on a music improvisation process. MATLAB programming software is …

Visual Data Mining, Syeda Sadiya

All Graduate Projects

Occlusion is one of the major problems for interactive visual knowledge discovery and data mining in the process of finding patterns in multidimensional data.This project proposes a hybrid method that combines visual and analytical means to deal with occlusion in visual knowledge discovery called as GLC-S which uses visualization of n-D data in 2D in a set of Shifted Paired Coordinates (SPC). A set of Shifted Paired Coordinates for n-D data consists of n/2 pairs of common Cartesian coordinates that are shifted relative to each other to avoid their overlap. Each n-D point A is represented as a directed graph …

Green Thermosetting Factory: Novel Star-Shaped Bio-Based Systems And Their Thermosetting Resins; Synthesis And Characterization, Arash Jahandideh

Electronic Theses and Dissertations

Increasing attentions toward sustainable development, economic and environmental issues have led to many attempts at replacing the petroleum-based materials with renewables. Substitution of petroleum-based platforms with green alternative technologies is beneficiary in different ways. Using bio-renewables reduces the dependency of the national plastic industry to the petroleum resources and substantially promotes the environmental profile and sustainability of the product. It is expected that the emergence of the corn-based thermosetting industry generates substantial profits for the corn production sector. Developments in the emerging biobased thermosets are spectacular from a technological point of view. However, there are still several disadvantages associated with …

Normalization Of Pseudo-Invariant Calibration Sites For Increasing The Temporal Resolution And Long-Term Trending, Harika Vuppula

Electronic Theses and Dissertations

Given their low level of temporal, spatial, and spectral variability, Pseudo-Invariant Calibration Sites (PICS) have been increasingly desired as data sources for radiometric calibration of Earth imaging satellite sensors. The temporal resolution for PICS data acquired by any sensor is limited by the amount of time required for it to make subsequent passes over the site. Consequently, for any given PICS, it can take many years of imaging to develop a sufficient amount of cloud-free data to perform radiometric calibration; this can be especially problematic for sensors in their early years after launch. This thesis presents techniques to combine Landsat-8; …

Estimating The Effects Of Blasting Vibrations On The High-Wall Stability, Abhinav Sharma

Theses and Dissertations--Mining Engineering

The stability of the high-walls is one of the major concerns for open pit mines. Among the various factors affecting the stability of high-walls, blast vibrations can be an important one. In general, worldwide the established respective government regulations and industry standards are used as guidance to determine the maximum recommended levels of the peak particle velocity and frequency from the blast to avoid any effects on the structures around the mining project. However, most of the regulations are meant for buildings or houses and do not concern high-walls.

This thesis investigates the response of high-walls under the effects of …

Kentucky Traffic Collision Facts 2016, Eric R. Green, Paul A. Ross, Christopher L. Blackden, Kentucky State Police

Kentucky Transportation Center Research Report

KENTUCKY’S TRAFFIC COLLISION FACTS report is based on collision reports submitted to the Kentucky State Police Records Branch. As required by Kentucky Revised Statutes 189.635, “every law enforcement agency whose officers investigate a vehicle accident of which a report must be made...shall file a report of the accident...within ten days after investigation of the accident upon forms supplied by the bureau.” The stated purpose of this requirement is to utilize data on traffic collisions for such purposes as will improve the traffic safety program in the Commonwealth. Data contained in this report are based solely on the observations and judgements …

A Machine Learning Approach For Enhancing Security And Quality Of Service Of Optical Burst Switching Networks, Adel Dabash A. Rajab

Theses and Dissertations

The Optical Bust Switching (OBS) network has become one of the most promising switching technologies for building the next-generation of internet backbone infrastructure. However, OBS networks still face a number of security and Quality of Service (QoS) challenges, particularly from Burst Header Packet (BHP) flooding attacks. In OBS, a core switch handles requests, reserving one of the unoccupied channels for incoming data bursts (DB) through BHP. An attacker can exploit this fact and send malicious BHP without the corresponding DB. If unresolved, threats such as BHP flooding attacks can result in low bandwidth utilization, limited network performance, high burst loss …

Low-Cost Fishing Net-Reinforced Cement Matrix Overlay For Substandard Concrete Masonry In Coastal Areas, Mohammed A. Mousa

Theses and Dissertations

The aim of this project is to investigate a novel and affordable option to externally strengthen substandard concrete masonry (CM) walls for out-of-plane loads (e.g., high winds and flying debris). Two types of strengthening materials for fiber-reinforced cement mortar (FRCM) overlays are investigated; namely, fishing net (FN) and welded wire steel mesh (WWSM) reinforcements.

Salient mechanical properties of representative materials including substandard concrete masonry unit (CMU) blocks, mortar, nylon FN and WWSM reinforcements, and FRCM composite, were experimentally characterized. A simple bilinear model is proposed to describe the tensile behavior of the FRCM composite. An analytical model was then used …

Test 2176: Kubota M7-131, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2180: Claas Axion 820, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2189: Kubota M7-151, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tractor Test 2175: Claas Xerion 5000 Cvt, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tractor Test 2172: John Deere 8400r E23, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1149 Challenger 1046, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1148 Challenger 1042, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1147 Challenger 1038, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …