Engineering Commons^™

Optimization Of Size And Siting Of Distributed Generation In Unbalanced Distribution Systems: A Literature Review, Pema Dorji, Stefan Lachowicz, Octavian Bass

Research outputs 2022 to 2026

Renewable energy sources (RES) are essential for meeting the rising global electricity demand while reducing greenhouse gas emissions from conventional generation. As traditional systems approach capacity saturation, the integration of RES into power grids becomes increasingly vital. However, the intermittent and variable nature of RES introduces significant technical, economic, and operational challenges. This review focuses on the optimal planning and integration of distributed generation in unbalanced distribution systems, which more accurately reflect real-world power network conditions. Emphasis is placed on siting and sizing strategies aimed at enhancing voltage stability, minimizing power losses, and reducing system costs and emissions. The review …

Next-Generation Underwater Localization: Artificial Intelligence-Based And Energy-Aware Approaches, Mainul Islam Chowdhury, Quoc Viet Phung, Iftekhar Ahmed, Walid K. Hasan, Daryoush Habibi

Research outputs 2022 to 2026

Designing accurate, reliable, and energy-efficient localization techniques for underwater acoustic networks is highly challenging due to factors such as large propagation delays, the absence of Global Positioning System (GPS), node mobility, and limited acoustic link capacity. In any underwater sensor network (UWSN) monitoring application, data collected by underwater nodes becomes more meaningful when accompanied by location information. However, traditional localization methods often rely on geometric models and statistical filters that are highly sensitive to sensor noise and communication constraints. Energy consumption is another primary concern in UWSNs, not only because replacing and recharging underwater batteries are challenging, but also due …

Biochar As Additive And Modifier In Bitumen And Asphalt Mixtures, Chathurika Dassanayake, Nuha S. Mashaan

Research outputs 2022 to 2026

Incorporating biochar into pavement materials is a novel and environmentally sustainable approach that aligns with global sustainability goals and advances greener pavement technologies. Studies have shown that biochar significantly enhances the strength, durability, and stability of pavements, while also contributing to sustainability by lowering the carbon footprint associated with traditional construction materials. Additionally, the incorporation of biochar contributes to the sustainability of asphalt engineering by reducing reliance on petroleum-based products and promoting the valorization of biomass. The primary objective of this review is to critically evaluate and synthesize existing research on the use of biochar in bitumen and asphalt mixtures, …

Bio-Inspired Computational Intelligence Metaheuristic-Based Optimization And Sensitivity Analysis Approach To Determine Techno-Economic Feasibility Of Hydrogen Refueling Stations For Fuel Cell Vehicles, Paul C. Okonkwo, Samuel Chukwujindu Nwokolo, Saad S. Alarifi, Stephen E. Ekwok, Rita Orji, Sunday O. Udo, Ahmed M. Eldosouky, El Manaa Barhoumi, Barun Kumar Das, David Gomez-Ortiz, Kamal Abdelrahman, Anthony E. Akpan

Research outputs 2022 to 2026

This study presents a comprehensive economic and technological evaluation of renewable hybrid power systems for hydrogen refueling stations (HRS) in Nizwa, Oman, leveraging cutting-edge optimization algorithms to determine the most cost-effective and efficient hybrid energy system configurations. Three hybrid energy systems of photovoltaic-wind turbine-battery (PV-WT-B), photovoltaic-wind-fuel cell-battery (PV-WT-FC-B), and wind turbine-battery (WT-B) were evaluated based on net present cost (NPC), levelized cost of energy (LCOE), and levelized cost of hydrogen (LCOH). The study employs advanced optimization techniques, including the Mayfly Algorithm, Genetic Algorithm, CUKO Search, Gray Wolf Optimizer (GWO), Constrained Particle Swarm Optimization (CPSO), Harmony Search (HS), and Flower Pollination …

The Microbial Factor In Subsurface Hydrogen Behavior: Implications For Wettability And Interfacial Dynamics, Hamid Esfandyari, Raziallah Jafari Jozani, Aliakbar Hassanpouryouzband, Farhid Hemmatzadeh, Manouchehr Haghighi, Stefan Iglauer, Alireza Keshavarz, Abbas Zeinijahromi

Research outputs 2022 to 2026

Microbial activity plays a significant role in subsurface hydrogen behavior, with implications for underground storage and natural hydrogen systems. This study examines how microbial processes influence the wettability and solid–liquid interfacial characteristics of key subsurface minerals, calcite, dolomite, quartz, and gypsum, in hydrogen-brine-rock systems under realistic subsurface conditions. Wettability directly affects hydrogen distribution, flow dynamics, and trapping, making it a critical factor for both storage and natural recovery applications. Experiments were conducted under high-pressure, high-temperature conditions, with SEM/EDS analysis used to characterize interfacial modifications and mineral surface changes across three scenarios: clean, organic acid-aged, and microbial-aged. Microbial aging consistently increased …

Piezoelectric Energy Harvesting From Roadways: Challenges, Advances, And Future Directions, Heba Mohamed Gaber, Mohamed Abdel-Raheem

Civil Engineering Faculty Publications

As the global demand for renewable energy intensifies, piezoelectric energy harvesting from roadways has emerged as a promising avenue for sustainable power generation. This systematic literature review analyzes 61 peer-reviewed studies to assess the feasibility, performance, and potential of integrating piezoelectric systems into roadway infrastructure. While technology faces challenges, such as high installation costs, limited energy output, and a scarcity of thorough economic evaluations, findings suggest it holds considerable promise as a supplementary renewable energy source. The review analyzes the operational characteristics and efficiencies of various piezoelectric transducers, identifies key factors influencing system performance, and evaluates recent technological advances. It …

The Equity Implications Of Pecuniary Externalities On An Electric Grid, Charles Sims, Gasser G. Ali, J Scott Holladay, Tim Roberson, Chien-Fei Chen, Islam H. El-Haddad

Civil Engineering Faculty Publications

The adoption of rooftop photovoltaic (PV) systems can create upward pressure on retail electricity rates as utilities are forced to spread their fixed costs of generation and transmission across a smaller customer base. Since high-income households are more likely to purchase PV systems, low-income households may be disproportionately impacted by these rate increases. Using a novel combination of agent-based computational economic modeling and a choice experiment of rooftop solar adoption, we show how this pecuniary externality between low- and high-income customers increases low-income electricity bills by 10% in an area with some of the highest poverty rates in the United …

Advancements In Sinkhole Remediation: Field Data-Driven Sinkhole Grout Volume Prediction Model Via Machine Learning-Based Regression Analysis, Bubryur Kim, Yuvaraj Natarajan, K. R. Sri Preethaa, V. Danushkumar, Ryan Shamet, Jiannan Chen, Rui Xie, Timothy Copeland, Boo Hyun Nam, Jinwoo An

Civil Engineering Faculty Publications

Sinkhole formation poses a significant geohazard in karst regions, where unpredictable subsurface erosion often necessitates costly grouting for stabilization. Accurate estimation of grout volume remains a persistent challenge due to spatial variability, site-specific conditions, and the limitations of traditional empirical methods. This study introduces a novel machine learning-based regression model for grout volume prediction that integrates cone penetration test (CPT)-derived Sinkhole Resistance Ratio (SRR) values, spatial correlations between CPT and grouting points (GPs), and field-recorded grout volumes from six sinkhole sites in Florida. Three data transformation methods, the Proximal Allocation Method (PAM), the Equitable Distribution Method (EDM), and the Threshold-based …

Establishing Procedures For Primary Human Myoblast Cell Culture, Erica Duffy

Biomedical Engineering

Peripheral Artery Disease (PAD) affects an estimated 200 million people worldwide and is the leading cause of amputation in the United States. PAD is characterized by atherosclerotic narrowing of arteries, resulting in ischemia from reduced blood flow to distal tissues. Although surgical and percutaneous interventions can restore perfusion, fewer than 50% of patients experience sustained benefit, highlighting the need for alternative therapeutic strategies. One promising approach is promoting arteriogenesis, the growth and outward remodeling of pre-existing collateral vessels that improve blood flow around the occluded arteries. Arteriogenesis is regulated by regenerative, M2-polarized macrophages, making macrophage polarization a key therapeutic target. …

A Human Factors Analysis And Classification System (Hfacs) Approach To Compare Cardiovascular, Orthopedics, Trauma Care, And Neurosurgery, Asfandyar Khan

Doctoral Dissertations and Master's Theses

Background: Despite significant progress in patient safety, human error continues to occur at high rates in procedural settings. Traditional safety models tend to focus on retrospective incident analysis, often overlooking the systemic conditions that allow errors to occur. The Human Factors Analysis and Classification System (HFACS) offers a proactive lens to understand how and where errors emerge and is useful for identifying active and latent failures.

Objective: To evaluate the utility and reliability of the Human Factors Analysis and Classification System (HFACS) in categorizing and comparing the pattern of frequencies (events) in cardiovascular, orthopedic, trauma care, and neurosurgical procedure.

Design, …

Thermal Management With Supercritical Carbon Dioxide Under Extreme Applications, Devon Hardy

Doctoral Dissertations and Master's Theses

A unique challenge in thermal system design is minimizing the power required to operate cooling systems while maintaining effective heat removal. Traditional cooling systems utilize single-phase fluids where the heat transfer mechanisms are well understood. To meet a variety of cooling demands, a range of technologies are available, including microchannel forced convection, jet impingement, porous media, nanofluids, pin fin arrays, and film cooling, each offering distinct advantages and limitations. While the performance of single- or two-phase cooling systems are generally predictable, in extreme thermal environments, new cooling solutions are needed to improve overall system efficiency and reliability.

Supercritical fluids, particularly …

Propeller Noise Prediction Of An Urban Air Mobility Vehicle In Urban Environment, Jie Hua

Doctoral Dissertations and Master's Theses

Urban Air Mobility (UAM) vehicles operate in complex, unsteady aerodynamic environments where wake interactions, gust and turbulence significantly affect both performance and noise generation. Understanding these mechanisms is critical for developing quieter and more efficient eVTOL systems that meet future community noise and certification requirements. This dissertation focuses on the high-fidelity numerical investigation of propeller noise in three representative unsteady loading scenarios: (i) transition (tilt) flight, (ii) edgewise inflow, and (iii) wake–propeller interaction. Each case emphasizes different physical mechanisms that dominate noise generation in UAM operations. Hybrid turbulence-resolving approaches—Detached Eddy Simulation (DES) and Delayed Detached Eddy Simulation (DDES)—are coupled with …

Occurrence Of Per And Polyfluoroalkyl Substances In Rural Wastewater Treatment Plants And Comparison To Large Treatments Plants, Madeleine Rauhauser

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Per and polyfluoroalkyl substances (PFAS) are a class of compounds defined by their carbon – fluorine bonds, which are incredibly strong. The strength of this bond makes these compounds very useful industrially, they are used as waterproof and grease proof coatings, and as fire retardants. The same thing that makes them useful industrially makes them incredibly recalcitrant in the environment, it is difficult to destroy these compounds. PFAS are also suspected to cause health impacts in people, such as kidney cancer and low birth weights. Wastewater has been commonly identified as a contributor to the amount of PFAS in the …

Further Evaluation Of Speed Tables On Roadway Curves: Simulation And Expeditionary Deployments, Nathan Reineke

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The road network leading up to a United States military base is known as an Entry Control Facility, or ECF. Entry control facilities are used to shield military installations by monitoring vehicles and refusing access to unauthorized vehicles. Passive control devices, including speed tables, are used to disrupt or delay threat vehicles attempting to navigate ECFs at high speeds. The purpose of this research was to recommend optimized configurations of speed tables in combination with roadway curves which allow safe, efficient traversal for authorized vehicles and disruption or delay for threat vehicles.

First, an analytical model of a Tesla Model …

Automation And Upgrading Of Custom Cold Wall Uhv-Cvd Reactor For Group Iv Material Development, Alexander Golden

Graduate Theses and Dissertations

Group IV alloys have shown promising results for infrared optoelectronic applications where III-V materials are currently dominant. The III-V material system has vacancies that Group IV materials can fill, most importantly complementary metal oxide semiconductor (CMOS) process compatibility making quality devices much cheaper and widely available compared to the current state of the art. Silicon, being an indirect band gap Group IV material, has poor performance in optoelectronic applications but is the dominant material for most of the electronic industry. However, when silicon is alloyed or substituted with other group IV materials, these optoelectronic properties can be enhanced and, in …

Securing Connected And Autonomous Vehicles, Owana Marzia Moushi

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

A vehicular network is susceptible to various security flaws and attacks. Cryptographic techniques are used in vehicular networks but these alone cannot provide proper security to the network. Identifying various types of attacks is necessary to secure vehicular communication networks. In this dissertation, we focused on detecting various insider attacks in vehicular networks to enhance the security of the network.

Our first contribution in this dissertation is the detection of both binary and multi-class data replay and data replay Sybil attacks in vehicular networks. A publicly available dataset, VeReMi-Extension is used to detect these attacks. This dataset has been reformulated …

Exploring Transformative Learning Experiences In Engineering Doctoral And Post-Doctoral Education: Developing Non-Technical Competencies For Early-Career Academic Roles, Ibukunoluwa Eunice Salami

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This dissertation explores the transformative learning experiences that early-career engineering faculty recounted from their doctoral and postdoctoral training and how these experiences shaped the development of non-technical competencies essential for academic success. Grounded in Mezirow’s Transformative Learning Theory (TLT) and the Competency-Based Professional Development Framework (CBPDF), the study examines how reflection and shifts in frames of reference supported competency growth and faculty readiness. A qualitative holistic single-case study design was employed. Data sources included semi-structured interviews with early-career engineering faculty and program learning objectives drawn from graduate handbooks. Data analysis was both deductive and inductive guided by Mezirow’s ten phases …

Real-Time, Co-Regulated Design For Cyber-Physical, Multi-Rotor Uas Swarms, Grant Simon Phillips

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Uncrewed Aerial Systems (UAS) have been integrated into a wide range of research and industrial applications, with growing interest in extending mission duration and spatial coverage through coordinated multi-UAS systems, or swarms. While swarming offers the potential for extended mission endurance and robustness through advanced path-planning, control, and estimation algorithms, significant challenges arise when implementing these methods on decentralized platforms composed of size, weight, and power-constrained (SWaP) vehicles. Limitations in onboard computational capacity and congested communication channels can break critical design-time assumptions, which at best, will degrade application quality of service, and at worst, destabilize the fleet through excessive delays …

Design Principles For Customer‑Engaging Digital Service Systems: An Action Research Study, Keng Siau, Xiaofeng Chen, Xin Tan

Research Collection School Of Computing and Information Systems

Digital services represent a business approach employed by organizations to operate in the digital environment. However, systematic development guidelines for developing quality digital service systems are lacking in the literature. The authors identified four general challenges for developing and implementing customer-engaging digital service systems (CEDSS). By employing the method of canonical action research in a digital service system project, they derived 10 design principles for developing high-quality CEDSS. They empirically evaluated the design principles in the development project and through follow-up focus group sessions. The design principles provide applicable and actionable guidelines for the development of CEDSS.

Short-Arc Angles-Only Initial Orbit Determination For Leo And Geo Objects Using A Genetic Algorithm, Joseph R. Piini

Master's Theses

An ever-growing interest in utilizing space for scientific, commercial, and defense applications has led to an exponential rise in orbital debris recent years. With this sharp increase in space objects comes a greatly increased risk of potential collisions, necessitating an increase in Space Situational Awareness. In order to best mitigate the risk of future collisions in an increasingly congested space environment, it is crucial to be able to accurately determine the orbits of these new objects for trajectory tracking. This process is initial orbit determination (IOD), and is especially difficult when only observation angles are available for short observation times. …

Real Time Markerless 3d Hand Tracking For Intuitive Robotic Arm Control, Dylan G. Featherson

Master's Theses

This thesis presents a real-time, markerless motion-capture system for intuitive control of a multi-degree-of-freedom robotic arm. Using two synchronized RGB cameras and stereo-vision triangulation, the system reconstructs the three-dimensional position of a user’s hand without the need for physical markers or wearable sensors. The reconstructed 3D coordinates are mapped directly to the end-effector position of the Quanser QArm, a four-degree-of-freedom educational manipulator. Developed entirely in Python, the system integrates stereo camera calibration, 3D hand tracking with MediaPipe, coordinate transformation, and inverse kinematics into a unified real-time control pipeline operating at approximately 200 Hz. Calibration is performed through a checkerboard-based stereo …

Analyzing Patterns In Hofstede’S Cultural Dimensions Towards Individual Ai Receptiveness For Affective Experiences, Maggie Yang

Master's Theses

The use of artificial intelligence (AI) has significantly advanced efficient decision-making, with trust in algorithmic decisions shown to vary by cultural upbringing [1]. As AI becomes increasingly embedded in everyday life, it is essential to examine how cultural values affect trust in AI in subjective contexts that extend beyond purely quantitative analysis, like the personal interpretation of art. This work utilizes Hofstede’s cultural dimensions to investigate potential patterns in receptiveness towards AI predictions during art interpretation, providing insight into individual susceptibility to bias in AI-assisted affective analysis.

The study leveraged a cultural dimension survey and a custom Java program connected …

Bim-To-Brick: Using Graph Modeling For Iot/Bms And Spatial Semantic Data Interoperability Within Digital Data Models Of Buildings, Filippo Vittori, Fu Chuan Tan, Laura Anna Pisello, Adrian Chong, Cristina Piselli, Clayton Miller

Research Collection College of Integrative Studies

The holistic management of a building requires data from heterogeneous sources such as building management systems (BMS), Internet-of-Things (IoT) sensor networks, and building information models (BIM), all aimed at environmental well-being. Data interoperability is a key component to eliminate silos of information, and using semantic web technologies like the BRICK schema, an effort to standardize semantic descriptions of the physical, logical, and virtual assets in buildings and the relationships between them, is a suitable approach. However, current data integration processes can involve significant manual interventions. This paper presents a methodology to automatically collect, assemble, and integrate information from a building …

Cross-Domain Disaggregation Of Electricity For Heating In All-Electric School Buildings – Learning From School Buildings With District Heating, Synne Krekling Lien, Ada Canaydin, Clayton Miller, Chun Fu, Hussain Kazmi, Jayaprakash Rajasekharan

Research Collection College of Integrative Studies

Electric heating is widespread in Norwegian buildings and significantly contributes to peak loads in the electricity grid. Non-residential buildings are typically heated either by district heating or a combination of electrical heating appliances. Despite its widespread use, most buildings lack sub-meters for electric heating. As a result, the true potential for energy efficiency and load flexibility from heating appliances in buildings remains unknown. Non-intrusive load monitoring and disaggregation techniques offer alternatives to sub-metering by using data-driven methods to extract electricity use for appliances from time-series data. However, little research has been conducted on disaggregating electrical heating loads from low-resolution data, …

Investigating The Efficiency Of Ingan P-N-P-N Homojunction Solar Cells, Moath Alhejji, Mohammad Alavijeh, Jacob Kupernik, Mirsaeid Sarollahi, Abbas Jammali, Seyed Taghavi, Reem Alhelais, Md Hel Uddin Maruf, Morgan Ware

Electrical Engineering and Computer Science Faculty Publications and Presentations

This research investigates the development of a novel p-n-p-n homostructure solar cell, through semiconductor simulations using the Nextnano software. InGaN was used as a model system in order to achieve a bandgap with optimized efficiency for a p-n homojunction solar cell. By increasing the uniform doping concentration from 1.5*10(16) cm(-3) to 1.5*10(17) cm(-3), the open circuit voltage (V-oc) increased while the short-circuit current density (J(sc)) decreased, as expected in simple p-n junctions. The p-n-p-n structure achieved a peak efficiency of 32.91% at a doping level of 6.5*10(16) cm(-3), a similar to 7% improvement over a conventional p-n junction's 25.31% efficiency …

Comparative Assessment Of Lower Limb Neuromusculoskeletal Activation And Joint Kinematics In Normal And Impaired Gait, Jack Ryan Schule

Theses and Dissertations

This thesis evaluates whether accessible and affordable technologies can provide clinically significant, quantifiable gait analysis comparable to traditional marker-based motion capture systems. Modern high-end systems offer excellent accuracy but remain financially and logistically inaccessible to many clinicians and researchers. To address this gap, a framework was developed using markerless pose estimation using the model, MediaPipe, inertial measurement units (IMUs) processed through an Extended Kalman Filter (EKF), and surface electromyography (sEMG) to measure joint kinematics and neuromuscular activity during gait. An experiment was performed where data was collected from participants with both normal gait and pathologies including: Osgood–Schlatter disease, Plica Band …

Effect Of Capillary And Viscous Forces On Carbon Dioxide Desorption In Porous Adsorbent Layers, Caroline Isabel Mcclung

Theses and Dissertations

Temperature swing adsorption-based (TSA) carbon dioxide (CO₂) separation processes, which involve an alternating flow of gases and liquids in adsorbent-coated microchannels, have been shown to yield superior and environmentally friendly performance than the existing processes. This technique begins by sending the impure gas mixture through hydrophobic silicalite adsorbent-coated microchannels, which results in the adsorption of CO₂. Subsequently, hot water heat transfer fluid (HTF) flows through the same channels, displaces the purified gas stream, heats the adsorbent, desorbs the CO₂, and removes that desorbed CO₂ from the channel. This stage is followed by cooling …

Qualitative Stereo Vision Using Distributed Extended Waltz Filtering, Ben Mathew

Theses and Dissertations

Stereo vision is a fundamental problem in computer vision, aimed at reconstructing three-dimensional scene structure from two or more two-dimensional images. Traditional stereo algorithms rely on quantitative disparity estimation, often constrained by calibration precision, lighting variations, and surface texture. In contrast, our proposed Qualitative Stereo Vision seeks to understand depth relationships and spatial configurations from multiple planar views through symbolic reasoning and constraint satisfaction, offering a more flexible and cognitively plausible approach to scene interpretation.

This dissertation presents a novel framework called Distributed Extended Waltz Filtering, designed to provide qualitative stereo vision, particularly in the presence of occlusions—a persistent challenge …

Jhtdb-Wind: A Web-Accessible Large-Eddy Simulation Database Of A Wind Farm With Virtual Sensor Querying, Xiaowei Zhu, Shuolin Xiao, Ghanesh Narasimhan, Luia A. Martinez-Tossas, Michael Schnaubelt, Gerard Lemson, Hanxun Yao, Alexander S. Szalay, Dennice F. Gayme, Charles Meneveau

Mechanical and Materials Engineering Faculty Publications and Presentations

This paper introduces JHTDB-wind (https://turbulence.idies.jhu.edu/datasets/windfarms), a publicly accessible database containing large-eddy simulation (LES) data from wind farms. Building on the framework of the Johns Hopkins Turbulence Database (JHTDB), which hosts direct numerical and some large-eddy simulation datasets of canonical turbulent flows, JHTDB-wind stores the full space-time (4D) history of the flow and provides users the ability to access and query the data via a web-based virtual sensor interface. The initial dataset comprises LES results from a large wind farm with 6 X 10 turbines, modeled using a filtered actuator line method, under conventionally neutral atmospheric conditions. This data comprises one …

Investigation Of Insertion Loss In Inkjet-Printed Coplanar Waveguide Based On Drying Temperature, Jun Ho Yu, Sung Min Sim, Jin Woo Choi, Sang Ho Lee, Jung Mu Kim

Michigan Tech Publications

In this study, we propose an optimized inkjet printing process to improve the insertion loss of inkjet-printed coplanar waveguide (CPW) transmission lines. The process involves varying the drying temperature and adjusting the number of printing steps to investigate their effects on the electrical characteristics of the printed CPW. The relationships between surface roughness, surface cavities, morphological changes, and insertion loss are studied by conducting atomic force microscopy analysis and by examining the insertion loss up to 3 GHz. The printed CPW that underwent low-temperature drying after the first printing and high-temperature drying after the second printing before sintering showed improved …