Engineering Commons^™

Brain Motion, Deformation, And Potential Injury During Soccer Heading, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Working Papers

This paper addresses the problem of what is happening physically inside the skull during head-ball contact. Mathematical models based upon Newton’s laws of motion and numerical methods are used to create animations of brain motion and deformation inside the skull.

Initially a 1 cm gap filled with cerebrospinal fluid (CSF) separates the brain from the rigid skull in adults and older children. Whole head acceleration induces a pulse of artificial gravity within the skull. Because brain density differs slightly from that of CSF, the brain accelerates and strikes the inner aspect of the skull, undergoing viscoelastic deformation, ranging from 1 …

A Novel Concrete-Based Sensor For Detection Of Ice And Water On Roads And Bridges, Habib Tabatabai, Mohammed Aljuboori

Civil and Environmental Engineering Faculty Articles

Hundreds of people are killed or injured annually in the United States in accidents related to ice formation on roadways and bridge decks. In this paper, a novel embedded sensor system is proposed for the detection of black ice as well as wet, dry and frozen pavement conditions on roads, runways, and bridges. The proposed sensor works by detecting changes in electrical resistance between two sets of stainless steel poles embedded in the concrete sensor to assess surface and near-surface conditions. A preliminary decision algorithm is developed that utilizes sensor outputs indicating resistance changes and surface temperature. The sensor consists …

The Future Of Nuclear Security In Moroccan Territory After The Creation Of The New Moroccan Agency Of Nuclear And Radiological Safety And Security: Opportunities And Challenges, Amal Touarsi, Amina Kharchaf

International Journal of Nuclear Security

Nowadays, a security regime for protecting nuclear and radiological material—providing an intelligent national regulatory institution and establishing national security laws—is necessary in order for a state to ensure security of nuclear and radiological materials used within its borders.

This paper focuses on discussing the opportunities and challenges facing the future of nuclear security after the creation of the new Moroccan Agency of Nuclear and Radiological Safety and Security.

Effectiveness Of Chain Link Turtle Fence And Culverts In Reducing Turtle Mortality And Providing Connectivity Along U.S. Hwy 83, Valentine National Wildlife Refuge, Nebraska, Usa, Marcel P. Huijser, Kari E. Gunson, Elizabeth R. Fairbank

Nebraska Department of Transportation: Research Reports

We evaluated the effectiveness of existing turtle fences through collecting and analyzing turtle mortality data along U.S. Hwy 83, in and around Valentine National Wildlife Refuge, Nebraska, USA. We also investigated the level of connectivity for turtles provided through the culverts that were originally designed to pass water through a capture-mark-recapture experiment. While fenced valley sections had 33.1% fewer turtle observations than unfenced valley sections, the difference was not significant. However, we think that the effectiveness of the fence can be improved through fence repairs, other modifications of the fences, vegetation maintenance, and extending the length of the fences. Four …

Safety And Organization: An Epics Partnership With Habitat For Humanity, Trevor Drouillard, Logan Quaas, Colleen Kelch, Jeremiah Campbell, Anna Francis, Connor Moore, Jiayin Qi, Alyssa Trobl

Purdue Journal of Service-Learning and International Engagement

The student authors of this essay are a group of eight participating in the Engineering Projects in Community Service (EPICS) program on the Habitat for Humanity (HFH) team. In this article, they describe how they have improved the working conditions within the loft space of the local Habitat for Humanity office in Lafayette, Indiana. Their work is intended to permanently improve the safety conditions of the loft, as well as the organization of the equipment within the loft. The specific safety concerns addressed by the HFH team include horizontal steel trusses at head level and an unprotected access opening in …

Safety Concepts For Workers From An Osha Perspective, Zamaan Al-Shabbani, Roy E. Sturgill Jr., Gabriel B. Dadi

Kentucky Transportation Center Research Report

Highway construction and maintenance workers face numerous hazards on job sites, many of which are unique by industry standards. Despite the exposure of state transportation agency employees and contractors to these hazards, there are few safety standards, regulations, programs that directly target the sector aimed at prevention and mitigation. To help the Kentucky Transportation Cabinet (KYTC) improve employee safety, researchers at the Kentucky Transportation Center (KTC) analyzed the frequency and causes of workplace injuries for 10 essential Cabinet maintenance operations. Most incidents were attributable to human factors or ergonomics. Based on this analysis, the leading causes of incidents, and a …

Increased Span Length For The Mgs Long-Span Guardrail System Part Iii: Failure Analysis, Sagheer A. Ranjha, Robert W. Bielenberg, John D. Reid, Ronald K. Faller

Nebraska Department of Transportation: Research Reports

The objective of this research study was to review and analyze the system failure observed during crash testing of an increased span length for the MGS long-span guardrail system in test no. MGSLS-2. Test no. MGSLS-2 was a full-scale crash test conducted on the MGS long-span guardrail with a span length of 311⁄4 ft (9.5 m). This test utilized universal breakaway steel posts (UBSPs) adjacent to the long span in lieu of the controlled release terminal (CRT) wood posts used in previous long span systems.

An engineering analysis was undertaken to review the downstream end anchorage failure observed in test …

A Hierarchical Modelling Approach For Assessing The Impact Factors Of The Measured Of Mobility And Safety At Intersections, Hiba Eyesha Abou-Kassem

Civil and Environmental Theses

Measuring safety and mobility for various types of intersections is crucial in any transportation study. Many factors contribute to changing the effectiveness of the different types of intersections on mobility and safety. Deciding which type of intersection is most suitable in a particular environ and prevailing traffic conditions depends on the number of crashes, injuries, delay time, etc. This study focuses on two intersection types; signalized intersections and non-signalized intersections (only roundabouts). The aim of this research is to devise a theoretical modeling framework and hence a statistical-based methodology that can be used to assess the safety and mobility measures …

An Alternative Method Of Identification Of A Failed Engine In Twin-Engine Turboprop Aircraft, Andrey Babin, Andrew R. Dattel Ph.D.

National Training Aircraft Symposium (NTAS)

Previous incidents and accidents involving twin-engine aircraft, including the recent TransAsia Flight 235 crash, have revealed that pilots are prone to mistakes in identifying the engine that fails, and subsequently, shutting down the wrong engine, i.e. perfectly working engine. Most accidents of this type happen on takeoff when pilot workload is at its highest level. It may be that the current training procedure for engine failures on takeoff, called identify-verify-feather (IVF), is counterintuitive and may lead to greater confusion. IVF is based on haptic sensory channel, which is known to be less effective than visual channel. This study proposes a …

Design For Safety: Characterization Of Structural Impact On Lithium-Ion Batteries, Mehdi Gilaki

Theses and Dissertations

The goal of this research is to develop a framework for design for safety of battery modules used in EV/HEV applications. Such a framework can enhance the crash safety of lithium-ion batteries by investigating prevailing failure mechanisms such as thermal runaway. The problem involves different scales from module level to laminate level. The multi-scale nature of the problem makes the analysis computationally complex and expensive. Furthermore, because of the risk of explosion, a battery testing apparatus needs special safety provisions making it difficult to test charged and ready-to-use battery cells. In this study, we have numerically investigated feasibility of using …

Radiative Heat Transfer Analysis Of Railroad Bearings For Wayside Hot-Box Detector Optimization, Arthur Mealer, Constantine Tarawneh, Stephen Crown

Mechanical Engineering Faculty Publications and Presentations

The railroad industry utilizes wayside detection systems to monitor the temperature of freight railcar bearings in service. The wayside hot-box detector (HBD) is a device that sits on the side of the tracks and uses a non-contact infrared sensor to determine the temperature of the train bearings as they roll over the detector. Various factors can affect the temperature measurements of these wayside detection systems. The class of the railroad bearing and its position on the axle relative to the position of the wayside detector can affect the temperature measurement. That is, the location on the bearing cup where the …

Customizing Vehicular Ad Hoc Networks To Individual Drivers And Traffic Conditions, Ali Rakhshan

Doctoral Dissertations

This dissertation studies the ability to individualize vehicular ad hoc networks (VANETs) in order to improve safety. Adapting a VANET to both its individual drivers' characteristics and traffic conditions enables it to transmit in a smart manner to other vehicles. This improvement is now possible due to the progress that is being made in VANETs. To accomplish this adaptation, our approach is to use VANET data to learn drivers' characteristics. This information along with the traffic data, can be used to customize the VANETs to individual drivers. In this dissertation, we show that this process benefits all the drivers by …

Initiating Event Analysis Of A Lithium Fluoride Thorium Reactor, Nicholas Charles Geraci

Engineering Management & Systems Engineering Theses & Dissertations

The primary purpose of this study is to perform an Initiating Event Analysis for a Lithium Fluoride Thorium Reactor (LFTR) as the first step of a Probabilistic Safety Assessment (PSA). The major objective of the research is to compile a list of key initiating events capable of resulting in failure of safety systems and release of radioactive material from the LFTR.

Due to the complex interactions between engineering design, component reliability and human reliability, probabilistic safety assessments are most useful when the scope is limited to a single reactor plant. Thus, this thesis will study the LFTR design proposed by …

Wheelieking Trainer Project Report, Harold Hall Iii, Nathaniel Fox, Thomas Niemisto

Biomedical Engineering

In this report we will detail the design and implementation process of the WheelieKing Trainer project, a device that helps people learn how to do wheelies on a bicycle by preventing backward falls. Formal project requirements are specified, followed by the ideation and iteration process to meet those requirements. The components and methods used to create the device are described in detail. The results of the development process and usage test results of the device are included. Appendices at the end of this report include references, supporting analyses, and project management and timeline details.

Recommendation Of A New Transit Performance Measure In The National Transit Database, Fatemeh Baratian-Ghorghi, Hossein Ahmadianyazdi

Journal of Public Transportation

The frequency of incidents negatively changes public perception with regard to the public safety in transit systems. The level of safety expressed as performance measures, ensures contractors and users that a quality safety level is maintained. Both the private and public sectors in the U.S. annually report accurate data to the National Transit Database (NTD) to be used in assessing the progress of the nation's public transportation systems. Although they must provide both the annual report and monthly reports including Safety and Security data, measures are only grouped into the indicators of efficiency and effectiveness of a system and there …

A Recommendation To Implement "Spanish In Construction" Topics Course, Benjamin W. Dimer

Construction Management

The purpose of this report is to recommend the addition of a Spanish in Construction class to the Construction Management curriculum. Many of Cal Poly’s graduates enter a construction workforce which is composed heavily of Hispanic and Latino members. Historically, Hispanics and Latinos account for not only the most rapidly growing populations of construction, but also the most proportionally at-risk. In an industry as dangerous as construction, it is important that students are well-rounded and well-prepared to contribute as safely, efficiently, and flawlessly as possible. Thorough literature review and an interview of part-time Cal Poly lecturer and industry veteran, Eric …

Evaluation Of Floorpan Tearing And Cable Splices For Cable Barrier Systems, Scott K. Rosenbaugh, Jason A. Hartwell, Robert W. Bielenberg, Ronald K. Faller, James C. Holloway, Karla A. Lechtenberg

Nebraska Department of Transportation: Research Reports

This research effort consisted of two objectives related to components of a prototype cable barrier system. The first objective was to mitigate the potential for vehicle floorpan tearing by modifying the cable guardrail posts. A bogie vehicle was equipped with a simulated floorpan designed to replicate the height, thickness, and strength of the floorpan of a Kia Rio vehicle. Baseline testing demonstrated that the top of the Midwest Weak Post (MWP) would contact, and crease the simulated floorpan, which matched the damage observed in actual full-scale vehicle crash tests. Once the test setup provided the desired results, various post configurations …

Length Of Need And Minimum System Length For F-Shape Portable Concrete Barrier, Robert W. Bielenberg, Dylan T. Meyer, Ronald K. Faller, John D. Reid

Nebraska Department of Transportation: Research Reports

Portable concrete barrier (PCB) systems are often used to redirect errant vehicles through a combination of inertial resistance, lateral friction loads, and tensile loads developed from the mass and friction of the barrier segments. State departments of transportation (DOTs) and other end users may wish to utilize minimal length PCB installations to shield a hazard or work zone or limit the number of barriers required on the upstream and downstream ends to reduce overall system length. However, concerns with the performance of shorter PCB installations include increased lateral deflections and working widths and barrier pocketing. Additionally, no impact testing has …

Testing And Evaluation Of Mash Tl-3 Transition Between Guardrail And Portable Concrete Barriers, Robert W. Bielenberg, Jessica L. Lingenfelter, Justine E. Kohtz, Ronald K. Faller, John D. Reid

Nebraska Department of Transportation: Research Reports

Three full-scale vehicle crash tests were conducted according to the Manual for Assessing Safety Hardware (MASH) Test Level 3 (TL-3) safety performance criteria on a transition between the Midwest Guardrail System (MGS) and a portable concrete barrier (PCB) system. The transition system utilized for test nos. MGSPCB-1 through MGSPCB-3 consisted of a standard MGS that overlapped a series of F- shape PCB segments that approached the MGS at a 15H:1V flare. In the overlapped portion of the barrier systems, uniquely-designed blockout holders and a specialized W-beam end shoe mounting bracket were used to connect the systems.

In test no. MGSPCB-1, …

Design Baseline Document: Mini Baja Frame, Michael Luke Scoggins

Undergraduate Honors Capstone Projects

Our objective as the Mini Baja Frame team is to design and implement a prototype vehicle frame that is both cost-effective and competitive in an all-terrain racing environment. This vehicle must be able to endure the trials of the Society of Automotive Engineers (SAE) Mini Baja competition. An effective frame will contribute to the complete Utah State University Mini Baja Team objectives by efficiently integrating the components produced by the drivetrain and the suspension engineers. In addition, this competition is a means for us as students to gain valuable, tangible experience in the engineering design process.

Increased Span Length For The Mgs Long-Span Guardrail System Part Ii: Full-Scale Crash Testing, Dylan T. Meyer, John D. Reid, Karla A. Lechtenberg, Robert W. Bielenberg, Ronald K. Faller

Nebraska Department of Transportation: Research Reports

The objective of this research study was to design and evaluate the MGS long-span design for use with unsupported spans greater than 25 ft (7.6 m). Two full-scale crash tests were conducted to evaluate the MGS long-span system with increased span lengths and the use of UBSP posts adjacent to the long span. Both tests were conducted according to the TL- 3 criteria outlined in MASH. Both test nos. MGSLS-1 and MGSLS-2 were conducted with the 2270P vehicle impacting their respective critical impact points at a speed of 62 mph (100 km/h) and an angle of 25 degrees. Test no. …

Opening Autonomous Airspace–A Prologue, Samuel M. Vance

International Journal of Aviation, Aeronautics, and Aerospace

The proliferation of Unmanned Aerial Vehicles (UAV), and in particular small Unmanned Aerial Systems (sUAS), has significant operational implications for the Air Traffic Control (ATC) system of the future. Integrating unmanned aircraft safely presents long-standing challenges, especially during the lengthy transition period when unmanned vehicles will be mixed with piloted vehicles. Integration of dissimilar systems is not an easy, straight-forward task and in this case is complicated by the difficulty to truly know what is present in the airspace. Additionally, there are significant technology, security and liability issues that will need resolution to ensure property and life are protected and …

Industrial-Grade Monitoring Solution: Hoistcam, Purdue Ect Team

ECT Fact Sheets

Safety and productivity are top priorities for contractors and industrial operations. Improving either makes a company more profitable and competitive. Technology advancements that can do both are important for every company to consider. HoistCam^TM industrial-grade video monitoring solutions can improve employees’ productivity and workplace safety in the construction industries. HoistCam also improves efficiency of operations and reduces job site accidents resulting in substantial cost savings to a contractor.

HoistCam™ is an integrated, wireless video system. The use of HoistCam eliminates blind lifts, blind spots and can share the live video with anyone, anywhere with solid security and easy control. …

Ls-Dyna® Modeling Enhancement Support, John D. Reid, Robert W. Bielenberg, Chaz Ginger

Nebraska Department of Transportation: Research Reports

The Pooled Fund Program member states provided funding for LS-DYNA modeling enhancements in Years 17 thru 22 (2006-2011), with a project period of 2006-2016. This report documents many of the modeling issues addressed throughout the project period. The funding has been effectively utilized to advance the current state-of-the-art for computer simulation and has provided the following benefits for the entire industry: (1) improved roadside safety hardware, (2) reduced development time and cost, (3) improved understanding of the behavior of roadside safety features, especially for impacts outside of normal crash test conditions, (4) improved LS-DYNA modeling techniques and procedures, and (5) …

Development Of Prognostic Techniques For Surface Defect Growth In Railroad Bearing Rolling Elements, Nancy De Los Santos, Robert Jones, Constantine Tarawneh, Arturo A. Fuentes, Anthony Villarreal

Mechanical Engineering Faculty Publications and Presentations

Prevention of bearing failures which may lead to catastrophic derailment is a major safety concern for the railroad industry. Advances in bearing condition monitoring hold the promise of early detection of bearing defects, which will improve system reliability by permitting early replacement of failing components. However, to minimize disruption to operations while providing the maximum level of accident prevention that early detection affords, it will be necessary to understand the defect growth process and try to quantify the growth speed to permit economical, non-disruptive replacement of failing components rather than relying on immediate removal upon detection. The study presented here …

Using Lidar Data To Analyze Access Management Criteria In Utah, Marlee Lyn Seat

Theses and Dissertations

The Utah Department of Transportation (UDOT) has completed a Light Detection and Ranging (LiDAR) data inventory that includes access locations across the UDOT network. The new data are anticipated to be extremely useful in better defining safety and in completing a systemwide analysis of locations where safety could be improved, or where safety has been improved across the state. The Department of Civil and Environmental Engineering at Brigham Young University (BYU) has worked with the new data to perform a safety analysis of the state related to access management, particularly related to driveway spacing and raised medians. The primary objective …

Integration Of Military Unmanned Aerial Systems (Uas) Into The Us National Airspace System: The Relationship Between Uas Accidents And Safety Concerns, Omar J. Hamilton, Timm J. Bliss, Chad Depperschmidt

International Journal of Aviation, Aeronautics, and Aerospace

The purpose of this study was to discover if a relationship existed between the most common safety concerns and the most common UAS accidents with regards to the integration of military unmanned aerial systems (UAS) into the National Airspace System (NAS). This study examined the most common causes of UAS accidents over a five-year period, the level of safety concerns and common concerns from UAS military pilots and sensor operators. The quantitative data was derived from the Air Force, Navy and Army Safety Offices, while the qualitative data was derived from an online questionnaire and follow-up interviews of US Air …

Quantitative Analysis Of The Impact Of Craft Labor Availability On Construction Project Performance, Hossein Karimi

Theses and Dissertations--Civil Engineering

A shortage of skilled craft labor in the North American construction industry has been an unfortunate cyclic trend since the late 1980s. This shortage has been reported and discussed frequently by numerous past studies in the context of construction industry. The 2008 U.S. recession was at least one period when the craft shortage temporarily improved, as witnessed by spikes in construction unemployment rates above 20% due to the work slowdowns. However, the current economic recovery period is once again experiencing craft shortages in some sectors of the U.S. construction industry. Although the past literature provides wealth of information about influence …

Finding The Balance Between Price And Protection: Establishing A Surface-To-Air Fire Risk-Reduction Training Policy For Air-Carrier Pilots, Earl W. Burress Jr., Ph.D.

Journal of Aviation/Aerospace Education & Research

Currently, U.S. air carriers do not provide equipment or training necessary to mitigate the risk posed by surface-to-air fire (SAFIRE) threats. These threats consist of self-guided weapons (infrared shoulder-fired surface-to-air missiles), manually-aimed threats (small arms, recoilless grenade launchers, rockets, and light anti-aircraft artillery), and hand-held lasers. Technological solutions to counter infrared shoulder-fired missiles have been explored, but were rejected due to prohibitive equipment and maintenance costs. A lower cost option, providing air-carrier pilots with SAFIRE risk-reduction training, has not been formally addressed by the air-carrier industry or the U.S. federal government. This effort will use a business concept, the Cost-Benefit …

Impact Of A Localized Lean Six Sigma Implementation On Overall Patient Safety And Process Efficiency, Luvianca Gil, Pilar Pazos, Mamadou Seck, Rolando Delaguila

Engineering Management & Systems Engineering Faculty Publications

Continuous quality improvement tools have caught the attention of the Health Care Industry as a solution to process efficiency, patient safety and cost reduction. This research explores the impact of a Lean Six Sigma (LSS) process improvement initiative in overall process efficiency and patient safety in two Labor and Delivery (L+D) units of two large hospital providers. This study focuses on the application of modeling and simulation methodology to investigate the influence of a localized process improvement intervention on the overall L+D unit output, by considering patient flow, system capacity and unit performance. The simulation models capacity profiles and patient …