Engineering Commons^™

Digital Control Board For Phased Array Antenna Beam Steering In Adaptive Communication Applications, Mayur Bansal

Master's Theses

The application of adaptive communication techniques for mobile communications has attracted considerable interest in the last decade. One example of these techniques is spatial filtering through planar antenna array beam forming.

This thesis describes the development of a digital system that adaptively controls a phased array antenna. The radiating structure of the phased antenna array is tetrahedral-shaped and contains four antenna elements on each of its three faces. The overall system comprises of a digital control board with an external computer interface, an RF control board, and the phased antenna array. The RF controls the main lobe direction on the …

Approximate Techniques In Solving Optimal Camera Placement Problems, Jian Zhao, Ruriko Yoshida, Sen-Ching Samson Cheung, David Haws

Statistics Faculty Publications

While the theoretical foundation of the optimal camera placement problem has been studied for decades, its practical implementation has recently attracted significant research interest due to the increasing popularity of visual sensor networks. The most flexible formulation of finding the optimal camera placement is based on a binary integer programming (BIP) problem. Despite the flexibility, most of the resulting BIP problems are NP-hard and any such formulations of reasonable size are not amenable to exact solutions. There exists a myriad of approximate algorithms for BIP problems, but their applications, efficiency, and scalability in solving camera placement are poorly understood. Thus, …

Assessing The Performance Of A Northern Gulf Of Mexico Tidal Model Using Satellite Imagery, Stephen C. Medeiros, Scott C. Hagen, Naira Chaouch, Jesse Feyen, Marouane Temimi, John F. Weishampel, Yuji Funakoshi, Reza Khanbilvardi

Publications and Research

Tidal harmonic analysis simulations along with simulations spanning four specific historical time periods in 2003 and 2004 were conducted to test the performance of a northern Gulf of Mexico tidal model. A recently developed method for detecting inundated areas based on integrated remotely sensed data (i.e., Radarsat-1, aerial imagery, LiDAR, Landsat 7 ETM+) was applied to assess the performance of the tidal model. The analysis demonstrates the applicability of the method and its agreement with traditional performance assessment techniques such as harmonic resynthesis and water level time series analysis. Based on the flooded/non-flooded coastal areas estimated by the integrated remotely …

Nuts & Bolts, Volume 1, Issue 4

Friends of the Larsen Tractor Museum

Splinter Gallery Construction

Restoration Club

Museum OLLI Program

Free Webinar: Ethanol in Legacy Engines

Physiological Fluid Specific Agglomeration Patterns Diminish Gold Nanorod Photothermal Characteristics, Kristen K. Comfort, Jared W. Speltz, Bradley M. Stacy, Larry R. Dosser, Saber M. Hussain

Chemical and Materials Engineering Faculty Publications

Investigations into the use of gold nanorods (Au-NRs) for biological applications are growing exponentially due to their distinctive physicochemical properties, which make them advantageous over other nanomaterials. Au-NRs are particularly renowned for their plasmonic characteristics, which generate a robust photothermal response when stimulated with light at a wavelength matching their surface plasmon resonance. Numerous reports have explored this nanophotonic phenomenon for temperature driven therapies; however, to date there is a significant knowledge gap pertaining to the kinetic heating profile of Au-NRs within a controlled physiological setting. In the present study, the impact of environmental composition on Au-NR behavior and degree …

Twelve Days Of Christmas Mechatronic Display, Michael Beltran, Christine Hagerman, Katie Ruhm

Mechanical Engineering

No abstract provided.

Characterisation And Optimisation Of Magnetorheological Elastomers, Jennifer Mcintyre

Doctoral

The primary aim of this research was to optimise the design of magnetorheological elastomers (MREs), composite materials consisting of magnetic particles in an elastomer matrix. In doing so, the understanding of their dynamic behaviour when subjected to stress would be furthered. Plenty of uses have been suggested for these materials which adapt to their environments and can be tuned to suit operating conditions, but very few of these have actually been realised. Characterising their dynamic behaviour is crucial if they are to gain wider use in commercial applications. The first objective of the research was to investigate the factors affecting …

Rheological Investigation Of The Shear Strength, Durability, And Recovery Of Alginate Rafts Formed By Antacid Medication In Varying Ph Environments, Brooke M. Elliott, Kathleen E. Steckbeck, Lisa R. Murray, Kendra Erk

School of Materials Engineering Faculty Publications

The mechanical response of alginate rafts formed by mixing liquid alginate antacid medication (Gaviscon® Extra Strength Liquid Antacid) with acidic solutions was investigated by deforming isolated rafts in a shear rheometer. As rafts were deformed to varying magnitudes of applied strain, rheological parameters were identified and related to the overall strength, durability, and recoverability of rafts formed at different pH (1.1 – 1.7) and aging conditions (0.5 – 4 hr). Rafts formed in the lowest acidity solutions (pH 1.4, 1.7) were elastically weak (G₀’ = 60, 42 Pa for un-aged raft) yet maintained their elasticity during applied …

Bs News November/December

Building Services Engineering

No abstract provided.

Timoshenko Beam Effects In Lateral-Mode Microcantilever-Based Sensors In Liquids, Joshua A. Schultz, Stephen M. Heinrich, Fabien Josse, Nicholas J. Nigro, Isabelle Dufour, Luke A. Beardslee, Oliver Brand

Civil and Environmental Engineering Faculty Research and Publications

Recent experimental and analytical research has shown that higher in-fluid quality factors (Q) are achieved by actuating microcantilevers in the lateral flexural mode, especially for microcantilevers having larger width-to-length ratios. However, experimental results show that for these geometries the resonant characteristics predicted by the existing analytical models differ from the measurements. A recently developed analytical model to more accurately predict the resonant behaviour of these devices in viscous fluids is described. The model incorporates viscous fluid effects via a Stokes-type fluid resistance assumption and `Timoshenko beam' effects (shear deformation and rotatory inertia). Unlike predictions based on Euler-Bernoulli beam …

Scalar Differential Equation For Slowly-Varying Thickness-Shear Modes In At-Cut Quartz Resonators With Surface Impedance For Acoustic Wave Sensor Application, Huijing He, Jiashi Yang, John A. Kosinski

Department of Mechanical and Materials Engineering: Faculty Publications

For time-harmonic motions, we generalize a 2-D scalar differential equation derived previously by Tiersten for slowly-varying thickness-shear vibrations of AT-cut quartz resonators. The purpose of the generalization is to include the effects of surface acoustic impedance from, e.g., mass layers or fluids for sensor applications. In addition to the variation of fields along the plate thickness, which is considered in the usual 1-D acoustic wave sensor models, the equation obtained also describes in-plane variations of the fields, and therefore can be used to study the vibrations of finite plate sensors with edge effects. The equation is compared with the theory …

Nineteenth Century North American And Pacific Tidal Data: Lost Or Just Forgotten?, Stefan A. Talke, David A. Jay

Civil and Environmental Engineering Faculty Publications and Presentations

Tide data are the oldest and longest oceanographic records and comprise one of the few tools for understanding, quantifying, and separating century-scale human and climate impacts on the coastal zone. Our archival research indicates that continuous measurements of tides began in 1844 in the western Atlantic, 1853 in the Eastern Pacific, and 1858 in the Western Pacific. At least 50 multiyear tide series existed by the year 1900. With few exceptions, however, these 19th and early 20th century measurements have not been analyzed in more than a century and have been forgotten and neglected by the scientific community. This article …

Development Of A Computational Approach To Assess Hip Fracture And Repair: Considerations Of Intersubject And Surgical Alignment Variability, Azhar Ali

Electronic Theses and Dissertations

Hip fracture remains a major public health concern due to the significant number of occurrences and mortality rates. Intertrochanteric fractures are the most common type of fracture and are typically caused by a fall. Intramedullary osteosynthesis is a common surgical practice to repair intertrochanteric fractures, but revisions are often required. The work presented in this thesis aims to improve the realism and fidelity of computational models of hip fracture, which can be an effective alternative to costly and labor-intensive clinical in-vivo and experimental in-vitro testing. Intersubject variability is inherently present in anatomy and material relations. Statistical shape and intensity models …

A Finite Element Model Based On Coupled Refined High-Order Global-Local Theory For Static Analysis Of Electromechanical Embedded Shear-Mode Piezoelectric Sandwich Composite Beams With Various Widths, S.B. Beheshti-Aval, S. Shahvaghar-Asl, M. Lezgy-Nazargah, Mohammad N. Noori

Mechanical Engineering

In this study, a new theory for the accurate simulation of the shear-mode behaviour of thin or thick piezoelectric sandwich composite beams is developed. The effects of transverse normal stress and transverse flexibility of layers are considered in the development of the proposed formulation. In order to increase the computational accuracy, all kinematic and stress continuity conditions are satisfied at layer interfaces. Moreover, for the first time, both the electrically induced strain components and the transverse flexibility are taken into account in the proposed formulation. Despite the fact that the number of unknown mechanical parameters in this theory is only …

On The Equivalences And Differences Of Evolutionary Algorithms, Haiping Maa, Dan Simon, Minrui Feic, Zixiang Chen

Electrical and Computer Engineering Faculty Publications

Evolutionary algorithms (EAs) are fast and robust computation methods for global optimization, and have been widely used in many real-world applications. We first conceptually discuss the equivalences of various popular EAs including genetic algorithm (GA), biogeography-based optimization (BBO), differential evolution (DE), evolution strategy (ES) and particle swarm optimization (PSO). We find that the basic versions of BBO, DE, ES and PSO are equal to the GA with global uniform recombination (GA/GUR) under certain conditions. Then we discuss their differences based on biological motivations and implementation details, and point out that their distinctions enhance the diversity of EA research and applications. …

Social Listening For Customer Acquisition, Juan Du, Biying Tan, Feida Zhu, Ee-Peng Lim

Research Collection School Of Computing and Information Systems

Social network analysis has received much attention from corporations recently. Corporations are trying to utilize social media platforms such as Twitter, Facebook and Sina Weibo to expand their own markets. Our system is an online tool to assist these corporations to 1) find potential customers, and 2) track a list of users by specific events from social networks. We employ both textual and network information, and thus produce a keyword-based relevance score for each user in pre-defined dimensions, which indicates the probability of the adoption of a product. Based on the score and its trend, out tool is able to …

The Effects Of Aircraft Certification Rules On General Aviation Accidents, Carolina Lenz Anderson

Doctoral Dissertations and Master's Theses

The purpose of this study was to analyze the frequency of general aviation airplane accidents and accident rates on the basis of aircraft certification to determine whether or not differences in aircraft certification rules had an influence on accidents. In addition, the narrative cause descriptions contained within the accident reports were analyzed to determine whether there were differences in the qualitative data for the different certification categories. The certification categories examined were: Federal Aviation Regulations Part 23, Civil Air Regulations 3, Light Sport Aircraft, and Experimental-Amateur Built. The accident causes examined were those classified as: Loss of Control, Controlled Flight …

Comparison Of Three Angle Of Attack (Aoa) Indicators: A Usability Study, Camilo Jimenez

Doctoral Dissertations and Master's Theses

Angle of Attack (AOA) is an important aeronautical concept used to understand the performance status of an aircraft during different flight stages. The Federal Aviation Administration (FAA) has indicated the importance of developing and encouraging the use of affordable AOA based systems to increase inflight safety. Embry-Riddle Aeronautical University's flight department decided to install AOA indicators in its fleet of Cessna 172S, to increase safety and to help student pilots better understand this important concept. This paper presents a review of AOA, visual display design principles, and usability. This experimental study examined three different AOA indicators provided by the …

Performance Analysis Of Non-Linear Adaptive Control Laws Using Hardware In The Loop Of An Unmanned Aerial System, Brendon Lyons

Doctoral Dissertations and Master's Theses

In practical applications, an Unmanned Aerial System's (UAS) baseline performance is dictated by how well it can follow a given trajectory with limited stress on the actuators. However, these can be insufficient performance metrics when the UAS is allowed to adapt to an unpredicted external influence such as turbulence or actuation failure, while maintaining a satisfactory baseline performance.

In this thesis, different control laws based on the formation flight geometry problem, nonlinear dynamic inversion and an artificial immune system adaptive mechanism , are implemented in hardware-in-the-loop as a precursor for in-flight testing. These controllers are compared based on three performance …

Nitroxide-Functionalized Graphene Oxide From Graphite Oxide, Yazmin I. Avila-Vega, Cesar C. Leyva-Porras, Marcela Mireles, Manuel Quevedo-Lopez, Javier Macossay-Torres, Jose Bonilla-Cruz

School of Integrative Biological & Chemical Sciences (Formerly Dept. of Chemistry)

A facile method for preparing functionalized graphene oxide single layers with nitroxide groups is reported herein. Highly oxidized graphite oxide (GO=90.6%) was obtained, slightly modifying an improved Hummer’s method. Oxoammonium salts (OS) were investigated to introduce nitroxide groups to GO, resulting in a one-step functionalization and exfoliation. The mechanisms of functionalization/exfoliation are proposed, where the oxidation of aromatic alcohols to ketone groups, and the formation of alkoxyamine species are suggested. Two kinds of functionalized graphene oxide layers (GOFT1 and GOFT2) were obtained by controlling the amount of OS added. GOFT1 and GOFT2 exhibited a high interlayer spacing (d0001 = 1.12nm), …

Biologically Enhanced Cathode Design For Improved Capacity And Cycle Life For Lithium-Oxygen Batteries, Dahyun Oh, Jifa Qi, Yi-Chun Lu, Yong Zhang, Yang Shao-Horn, Angela Belcher

Faculty Publications

Lithium-oxygen batteries have a great potential to enhance the gravimetric energy density of fully packaged batteries by two to three times that of lithium ion cells. Recent studies have focused on finding stable electrolytes to address poor cycling capability and improve practical limitations of current lithium-oxygen batteries. In this study, the catalyst electrode, where discharge products are deposited and decomposed, was investigated as it has a critical role in the operation of rechargeable lithium-oxygen batteries. Here we report the electrode design principle to improve specific capacity and cycling performance of lithium-oxygen batteries by utilizing high-efficiency nanocatalysts assembled by M13 virus …

Educational Campaign For Improving Pedestrian Safety: A University Campus Study, Yu Zhang, Makarand Gawade, Pei-Sung Lin, Trenda Mcpherson

CUTR Faculty Journal Publications

Florida is the state with the highest pedestrian fatality rate per unit population in the U.S. In addition to engineering countermeasures, educational efforts directed to pedestrians and other road users are equally important for improving pedestrian safety. To explore educational formats and identify effective educational methods, the Florida Department of Transportation (FDOT) sponsored a pilot program called “Bulls Walk and Bike Week Campaign” on the Tampa campus of the University of South Florida (USF). A before-and-after comparison study was designed to evaluate the effectiveness of this campaign. In the study, observational surveys and a questionnaire survey were conducted to compare …

Calculation Of Magnet Losses In Concentrated-Winding Permanent-Magnet Synchronous Machines Using A Computationally Efficient Finite-Element Method, Peng Zhang, Gennadi Y. Sizov, Jiangbiao He, Dan M. Ionel, Nabeel Demerdash

Electrical and Computer Engineering Faculty Research and Publications

The proposed hybrid method combines computationally efficient finite-element analysis (CE-FEA) with a new analytical formulation for eddy-current losses in the permanent magnets (PMs) of sine-wave current-regulated brushless synchronous motors. The CE-FEA only employs a reduced set of magnetostatic solutions yielding substantial reductions in the computational time, as compared with the conventional FEA. The 3-D end effects and the effect of pulsewidth-modulation switching harmonics are incorporated in the analytical calculations. The algorithms are applied to two fractional-slot concentrated-winding interior PM motors with different circumferential and axial PM block segmentation arrangements. The method is validated against 2-D and 3-D time-stepping FEA.

Creating Interactive Facilities Management Capabilities Through Building Information Modelling As A Tool For Managing The Irish Public Sector Estates - Presentation, Barry Mcauley

Conference papers

No abstract provided.

Dynamic Nanochannels For Biosensing Applications, Joseph B. Oxborrow

Theses and Dissertations

Inexpensive label-free detection of biomarker panels in serum could revolutionize earlycancer diagnosis and treatment. Such detection capabilities may be possible with dynamicnanochannels in conjunction with electrical impedance measurement. In Dr. Greg Nordin's lab I designed, fabricated and tested several iterations of these sensors with polydimethyl-siloxane microfluidics. The final design yielded a dynamic nanochannel array sensor thatshowed a 140% impedance change when exposed to 14µM bovine serum albumin in phos-phate buffered saline. For the geometry and noise limits of the tested device, simulationsindicated that a minimum detectable concentration of 20pM with specifically bound strep-tavidin should be possible. However, the polydimethylsiloxane approach …

Budgeted Personalized Incentive Approaches For Smoothing Congestion In Resource Networks, Pradeep Varakantham, Na Fu, William Yeoh, Shih-Fen Cheng, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

Congestion occurs when there is competition for resources by sel sh agents. In this paper, we are concerned with smoothing out congestion in a network of resources by using personalized well-timed in- centives that are subject to budget constraints. To that end, we provide: (i) a mathematical formulation that computes equilibrium for the re- source sharing congestion game with incentives and budget constraints; (ii) an integrated approach that scales to larger problems by exploiting the factored network structure and approximating the attained equilib- rium; (iii) an iterative best response algorithm for solving the uncon- strained version (no budget) of the …

Optimization Approaches For Solving Chance Constrained Stochastic Orienteering Problems, Pradeep Varakantham, Akshat Kumar

Research Collection School Of Computing and Information Systems

Orienteering problems (OPs) are typically used to model routing and trip planning problems. OP is a variant of the well known traveling salesman problem where the goal is to compute the highest reward path that includes a subset of nodes and has an overall travel time less than the specified deadline. Stochastic orienteering problems (SOPs) extend OPs to account for uncertain travel times and are significantly harder to solve than deterministic OPs. In this paper, we contribute a scalable mixed integer LP formulation for solving risk aware SOPs, which is a principled approximation of the underlying stochastic optimization problem. Empirically, …

Approximating The Seismic Amplification Effects Experienced By Solar Towers Mounted On The Rooftops Of Low-Rise Industrial Buildings, Peter Luiz Balla

Master's Theses

This thesis investigates the acceleration amplification experienced by solar towers mounted on the rooftops of low-rise industrial buildings during a seismic event. Specifically, this thesis looks to assess the validity of using amplification factors adopted by the ASCE 7-05Minimum Design Loads for Buildings and Other Structures to approximate seismic acceleration amplification for roof-mounted solar towers. To investigate the validity of the ASCE 7-05 amplification factors, this thesis conducts timehistory analyses of three theoretical solar towers mounted on the roof of a case study building. The time history analyses are conducted in the finite element computer modeling program SAP 2000 using …

Design And Implementation Of Eight-Legged Robotic Transporter, Jeremy David Depangher

Master's Theses

This thesis contains the design, manufacturing, and testing of a functional eight-legged robotic transporter based on the concept design laid out in U.S. Patent 7,246,671. The device is intended to achieve three different sequences of motion: regular driving, obstacle climbing, and stair climbing. The prototype was carried through concept design, analysis, selection of materials and components, manufacturing, software development, and final assembly and testing. The device can be assembled under multiple configurations, which harbor certain advantages and disadvantages. The results of the testing encourage the continuation of a second iteration of this concept.

Computational And Experimental Comparison Of A Powered Lift, Upper Surface Blowing Configuration, Jay M. Marcos

Master's Theses

In the past, 2D CFD analysis of Circulation Control technology have shown poor comparison with experimental results. In Circulation Control experiments, typical results show a relationship between lift coefficient, CL, vs blowing momentum coefficient, Cμ. CFD analysis tend to over-predict values of CL due to gridding issues and/or turbulence model selection. This thesis attempted to address both issues by performing Richardson’s Extrpolation method to determine an acceptable mesh size and by using FLUENT’s 2-equation turbulence models. The experimental results and CAD geometry were obtained from Georgia Tech Research Institute for comparison with the CFD analysis.

The study showed that 3D …