Engineering Commons^™

Performance Evaluation And Comparison Of Distributed Messaging Using Message Oriented Middleware, Naveen Mupparaju

UNF Graduate Theses and Dissertations

Message Oriented Middleware (MOM) is an enabling technology for modern event- driven applications that are typically based on publish/subscribe communication [Eugster03]. Enterprises typically contain hundreds of applications operating in environments with diverse databases and operating systems. Integration of these applications is required to coordinate the business process. Unfortunately, this is no easy task. Enterprise Integration, according to Brosey et al. (2001), "aims to connect and combines people, processes, systems, and technologies to ensure that the right people and the right processes have the right information and the right resources at the right time"[Brosey01]. Communication between different applications can be achieved …

Bone Properties By Nanoindentation In Mild And Severe Osteogenesis Imperfecta, Carolyne Albert, John Jameson, Jeffrey M. Toth, Peter Smith, Gerald F. Harris

Biomedical Engineering Faculty Research and Publications

Background

Osteogenesis imperfecta is a heterogeneous genetic disorder characterized by bone fragility. Previous research suggests that impaired collagen network and abnormal mineralization affect bone tissue properties, however, little data is yet available to describe bone material properties in individuals with this disorder. Bone material properties have not been characterized in individuals with the most common form of osteogenesis imperfecta, type I.

Methods

Bone tissue elastic modulus and hardness were measured by nanoindentation in eleven osteotomy specimens that were harvested from children with osteogenesis imperfecta during routine surgeries. These properties were compared between osteogenesis imperfecta types I (mild, n = …

A Hands-On, Active Learning Approach To Increasing Manufacturing Knowledge In Engineering Students, Jay R. Goldberg, David B. Rank

Biomedical Engineering Faculty Research and Publications

This paper describes a new learning module implemented as part of the senior capstone design course at Marquette University to teach engineering students about basic manufacturing processes, lean manufacturing principles, and design for manufacturability. The module includes several examples of active and student centered learning as part of an in-class assembly line simulation exercise. Students reflected on this experience, and suggested process improvements to save time, reduce cost and waste, and improve the assembly line process. They learned of the importance of manufacturing documentation, process design, and design for assembly. At the end of the module, students understood the importance …

Tuning Of The Transverse Magneto-Optical Kerr Effect In Magneto-Plasmonic Crystals, Martin Pohl, L. E. Kreilkamp, Vladimir I. Belotelov, Ilya A. Akimov, A N. Kalish, N E. Khokhlov, V J. Yallapragada, A V. Gopal, Mohammad Nur-E-Alam, Mikhail Vasiliev, D R. Yakovlev, Kamal Alameh, A K. Zvezdin, M Bayer

Research outputs 2013

The spectral properties of the transverse magneto-optical Kerr effect (TMOKE) in periodic metal–dielectric hybrid structures are studied, in particular with respect to the achievable magnitude. It is shown that the TMOKE is sensitive to the magneto-optical activity of the bismuth-substituted rare-earth iron garnet, which is used as a dielectric material in the investigated structures. For samples with larger Bi substitution level and, consequently, larger gyration constant, the magnitude of the TMOKE increases and reaches 13% in the case of a Bi1.8Lu1.2Fe3.6Al1.4O12 magnetic film. Further, it is demonstrated that the TMOKE vanishes at the high-symmetry points of the Brillouin zone (at …

Energy Efficiency Performance Improvements For Ant-Based Routing Algorithm In Wireless Sensor Networks, A. M. Zungeru, Kah Phooi Seng, Li-Minn Ang, W.C. Chia

Research outputs 2013

The main problem for event gathering in wireless sensor networks (WSNs) is the restricted communication range for each node. Due to the restricted communication range and high network density, event forwarding in WSNs is very challenging and requires multihop data forwarding. Currently, the energy-efficient ant based routing (EEABR) algorithm, based on the ant colony optimization (ACO) metaheuristic, is one of the state-of-the-art energy-aware routing protocols. In this paper, we propose three improvements to the EEABR algorithm to further improve its energy efficiency. The improvements to the original EEABR are based on the following: (1) a new scheme to intelligently initialize …

Unidirectional Coupling Of Surface Plasmons With Ultra-Broadband And Wide-Angle Efficiency: Potential Applications In Sensing, Kun Li, Feng Xiao, Fan Lu, Kamal Alameh, Anshi Xu

Research outputs 2013

A cascaded-grating coupling scheme for unidirectionally coupling and launching surface plasmons from free-space light with ultra-broadband and wide-angle efficiency is proposed and theoretically investigated, and the potential applications in sensing are discussed. The cascaded sub-gratings of different periods couple the incident light over a relatively wide wavelength and angular range into surface plasmon polaritons (SPPs). After traveling a short distance, the SPPs interact with the sensed medium, and then are coupled back into freely propagating light through the nanoslit in the metal film. By observing the changes of SPP-mediated light coupled out through the slit, broadband sensing is achieved. A …

High Sensitivity Optically Pumped Quantum Magnetometer, Valentina Tiporlini, Kamal Alameh

Research outputs 2013

Quantum magnetometers based on optical pumping can achieve sensitivity as high as what SQUID-based devices can attain. In this paper, we discuss the principle of operation and the optimal design of an optically pumped quantum magnetometer. The ultimate intrinsic sensitivity is calculated showing that optimal performance of the magnetometer is attained with an optical pump power of 20 W and an operation temperature of 48°C. Results show that the ultimate intrinsic sensitivity of the quantum magnetometer that can be achieved is 327 fT/Hz1/2 over a bandwidth of 26 Hz and that this sensitivity drops to 130 pT/Hz1/2 in the presence …

Plasmon-Mediated Magneto-Optical Transparency, Vladimir Belotelov, L. E. Kreilkamp, Ilya Akimov, A Kalish, D Bykov, S Kasture, V Yallapragada, A Gopal, A M Grishin, S I Khartsev, Mohammad Nur E Alam, Mikhail Vasiliev, L Doskolovich, D Yakovlev, Kamal Alameh, A K Zvezdin, M Bayer

Research outputs 2013

Magnetic field control of light is among the most intriguing methods for modulation of light intensity and polarization on sub-nanosecond timescales. The implementation in nanostructured hybrid materials provides a remarkable increase of magneto-optical effects. However, so far only the enhancement of already known effects has been demonstrated in such materials. Here we postulate a novel magneto-optical phenomenon that originates solely from suitably designed nanostructured metal-dielectric material, the so-called magneto-plasmonic crystal. In this material, an incident light excites coupled plasmonic oscillations and a waveguide mode. An in-plane magnetic field allows excitation of an orthogonally polarized waveguide mode that modifies optical spectrum …

Earthquake Load Attenuation Using Eps Geofoam Buffers In Rigid Wall Applications, Richard J. Bathurst, S Zarnani

Research outputs 2013

The paper is a synthesis of previously published work by the authors that is focused on the use of expanded polystyrene (EPS) geofoam buffers for seismic load attenuation against rigid basement and soil retaining walls. The paper begins with a brief description of the first documented field application followed by a description of physical 1 m-high reduced-scale shaking table tests that provided the first "proof of concept". Next, details of the development and verification of a displacement-based model and a FLAC numerical model are described and simulation results that were verified against the physical shaking table tests presented. The numerical …

Recent Developments In Magneto-Optic Garnet-Type Thin-Film Materials Synthesis, Mohammad Nur E Alam, Mikhail Vasiliev, Viacheslav Kotov, Kamal Alameh

Research outputs 2013

Magneto-optic (MO) garnets are used in a range of applications in nanophotonics, integrated optics, communications and imaging. Bi-substituted iron garnets of different compositions are the most useful class of materials in applied magneto- optics due to their excellent MO properties (large Faraday effect) and record-high MO figure of merit among all semi- transparent dielectrics. It is highly desirable to synthesise garnets which possess simultaneously a high MO figure of merit and large uniaxial magnetic anisotropy. However, the simultaneous optimization of several material properties and parameters can be difficult in single-layer garnet thin films, and it is also challenging to prepare …

Optical Fiber Bragg Grating Based Intrusion Detection Systems For Homeland Security, Gary Allwood, Steven Hinckley, Graham Wild

Research outputs 2013

This paper describes the use of optical Fiber Bragg grating (FBG) sensors for use in various intrusion detection systems for homeland security. We show that a FBG sensor can be used effectively as an embedded in-ground acoustic sensor, sensitive enough to detect the acoustic emissions associated with walking on a concrete surface. Also, the FBG can be used as an in-ground pressure switch for intrusion detection through temporary flooring materials, such as tiles and wooden laminate. In addition, we verify the use of FBGs as in-fence perimeter breach detectors. Finally, we show how an FBG can be used as a …

Modelling Of Polyaniline For Wi-Fi Electromagnetic Interference Shielding, Whamid Al-Shabib, Stefan W. Lachowicz

Research outputs 2013

In this paper COMSOL model is used to model the s-parameters of the electromagnetic shielding of layer/layers of Polyaniline (PAni) for Wi-Fi Electromagnetic Interference (EMI) shielding. PAni has a good future for minimizing the problems with Electromagnetic Shielding (EMS), and will be increasingly be used to provide protection from Electromagnetic Radiation (EMR) and Electromagnetic Interference (EMI). With the increased development in Wi-Fi and telecommunications equipment, a simple model is required to test for transmission losses. In this paper the electromagnetic radiation from antenna, positioned 30cm from PAni shielding device is modelled using COMSOL 4.2. The paper predicts the radiation reduction …

Oscillation Built-In-Self-Test For Adc Linearity Testing In Deep Submicron Cmos Technology, Koay Soon Chan, Nuzrul Fahmi Nordin, Kim Chon Chan, Terk Zyou Lok, Chee Wai Yong, Adam Osseiran

Research outputs 2013

This paper proposes an Oscillation BIST (OBIST) that is meant to test ADCs fabricated in sub 100nm processes. The design is intended to be capable of testing a 10-bit ADC that was designed in 40nm CMOS. The design scheme presents a simple analog stimulus generator that was designed in 40nm CMOS together with schematic based simulation results. There is also a description of a calibration circuit and a highlevel implementation of a BIST control system to run the BIST and to calculate static parameters such as Differential Non-linearity (DNL) and Integral Non-linearity (INL). Simulation results for the analog stimulus generator …

Free-Space Optics For High Speed Reconfigurable Card-To-Card Optical Interconnects, Ke Wang, Ampalavanpillai Nirmalathas, Christina Lim, Efstratios Skafidas, Kamal Alameh

Research outputs 2013

High-speed card-to-card optical interconnects are highly demanded in high-performance computing and data centers. Compared with other solutions, free-space optical interconnects have the capability of providing both reconfigurability and flexibility. In this paper we propose and experimentally demonstrate a free-space based reconfigurable optical interconnect architecture and it is capable of connecting cards located both inside the same rack as well as in different racks. Results show that 3xiO Gb/s data transmission is achieved with a worst-case receiver sensitivity better than -9.38 dBm.

The Optimisation Of A Turbulent Swirl Nozzle Using Cfd, Brett K. Thomas, Zahir U. Ahmed, Yasir M. Al-Abdeli, Miccal T. Matthews

Research outputs 2013

Swirl is imparted into free and impinging nozzle flows as well as jet flames to affect convective heat transfer, fluid mixing or flame stability. At the nozzle exit plane, the emerging flow strongly influences downstream flow development and so factors which impact upon the emitted flow are worthy of study. This paper presents preliminary CFD analyses into the effect of design parameters and operational settings on the emerging flow at the exit plane for a swirl nozzle (Remax~30,500). The research was conducted in the premanufacture stage to optimise the nozzle. Swirl is aerodynamically generated using multiple tangential ports located upstream …

Multi-Component Adsorption Of Benzene, Toluene, Ethylbenzene, And Xylene From Aqueous Solutions By Montmorillonite Modified With Tetradecyl Trimethyl Ammonium Bromide, Heshmatola Nourmoradi, Mehdi Khiadani, Mahnaz Nikaeen

Research outputs 2013

Multicomponent adsorption of benzene, toluene, ethylbenzene, and xylene (BTEX) was assessed in aqueous solutions by montmorillonite modified with tetradecyl trimethyl ammonium bromide (TTAB-Mt). Batch experiments were conducted to determine the influences of parameters including loading rates of surfactant, contact time, pH, adsorbate concentration, and temperature on the adsorption efficiency. Scanning electron microscope (SEM) and X-ray diffractometer (XRD) were used to determine the adsorbent properties. Results showed that the modification of the adsorbent via the surfactant causes structural changes of the adsorbent. It was found that the optimum adsorption condition achieves with the surfactant loading rate of 200 of the cation …

Indirect Measures Of Learning Transfer Between Real And Virtual Environments, Michael J. Garrett, Mark T. Mcmahon

Research outputs 2013

This paper reports on research undertaken to determine the effectiveness of a 3D simulation environment used to train mining personnel in emergency evacuation procedures, designated the Fires in Underground Mines Evacuation Simulator (FUMES). Owing to the operational constraints of the mining facility, methods for measuring learning transfer were employed which did not require real world performance evaluation. Transfer measures that examined simulator performance relative to real world experience, fidelity assessment, and appraisal of the training value of the platform were utilised. Triangulation of results across all three measures indicated the presence of learning transfer, suggesting the viability of indirect measures …

Optical Magnetometer Employing Adaptive Noise Cancellation For Unshielded Magnetocardiography, Valentina Tiporlini, Kamal Alameh

Research outputs 2013

This paper demonstrates the concept of an optical magnetometer for magnetocardiography. The magnetometer employs a standard Least-Mean-Squares (LMS) algorithm for heart magnetic field measurement within unshielded environment. Experimental results show that the algorithm can extract a weak heart signal from a much-stronger magnetic noise and detect the P, QRS, and T heart features and completely suppress the common power line noise component at 50 Hz.

Position Control Of Electro-Hydraulic Actuator System Using Fuzzy Logic Controller Optimized By Particle Swarm Optimization, Daniel M. Wonohadidjojo, Ganesh Kothapalli, Mohammed Hassan

Research outputs 2014 to 2021

The position control system of an electro-hydraulic actuator system (EHAS) is investigated in this paper. The EHAS is developed by taking into consideration the nonlinearities of the system: the friction and the internal leakage. A variable load that simulates a realistic load in robotic excavator is taken as the trajectory reference. A method of control strategy that is implemented by employing a fuzzy logic controller (FLC) whose parameters are optimized using particle swarm optimization (PSO) is proposed. The scaling factors of the fuzzy inference system are tuned to obtain the optimal values which yield the best system performance. The simulation …

A Method For Identifying Personalized Representations In Web Archives, Mat Kelly, Justin F. Brunelle, Michele C. Weigle, Michael L. Nelson

Computer Science Faculty Publications

Web resources are becoming increasingly personalized — two different users clicking on the same link at the same time can see content customized for each individual user. These changes result in multiple representations of a resource that cannot be canonicalized in Web archives. We identify characteristics of this problem by presenting a potential solution to generalize personalized representations in archives. We also present our proof-of-concept prototype that analyzes WARC (Web ARChive) format files, inserts metadata establishing relationships, and provides archive users the ability to navigate on the additional dimension of environment variables in a modified Wayback Machine.

Gpu-Optimized Code For Long-Term Simulations Of Beam-Beam Effects In Colliders, Y. Roblin, V. Morozov, B. Terzić, M. Aturban, D. Ranjan, M. Zubair

Computer Science Faculty Publications

We report on the development of the new code for long-term simulation of beam-beam effects in particle colliders. The underlying physical model relies on a matrix-based arbitrary-order symplectic particle tracking for beam transport and the Bassetti-Erskine approximation for beam-beam interaction. The computations are accelerated through a parallel implementation on a hybrid GPU/CPU platform. With the new code, a previously computationally prohibitive long-term simulations become tractable. We use the new code to model the proposed medium-energy electron-ion collider (MEIC) at Jefferson Lab.

Roles Of Compressive Residual Stress In Enhancing The Corrosion Resistance Of Nano Nitride Composite Coatings On Steel, Xiaoli Zhao, Paul Munroe, Daryoush Habibi, Zonghan Xie

Research outputs 2013

Nanocomposite coatings were synthesized, and subsequently annealed, in an attempt to understand the influence of residual stress upon their resistance to corrosion under acidic attack. Pitting corrosion, originating from microscopic coating defects, was commonly identified in the coatings subject to annealing. Finite element analysis was used to map the residual stress distribution adjacent to these defects and quantify resulting geometrical changes. The results show that with the presence of compressive residual stress in the coatings, corrosion-initiated cracking along weak interfaces was suppressed, and structural integrity maintained. Moreover, compressive residual stress helped constrict pre-existing structural defects in columnar-structured coatings and, in …

Investigation Of Mercury Use, Release, Deposition, And Exposures In The Tampa Bay Area, Ryan Algernon Michael

USF Tampa Graduate Theses and Dissertations

I investigate the links between mercury use, release, deposition, and population exposure in Tampa Bay, with the focus of identifying levers for reducing population mercury exposures. To achieve this, I investigated the trends in mercury use and release by products and processes in the Tampa Bay area using a Material Flow Analysis. Analysis of USEPA National Emissions Inventory data over time (1999 - 2008) identified relevant air source emission categories, and explored and compared state and regional trends in mercury emissions. To understand source contributions to wet deposited mercury in the Tampa Bay area, I analyzed trends in mercury deposition …

Synthesis Of Titanium Dioxide Photocatalyst With The Aid Of Supercritical Fluids, Haitao Li

USF Tampa Graduate Theses and Dissertations

Titanium Dioxide (TiO2) emerged as one of the most popular photocatalysts since 1970's. However, its photocatalytic activity requires UV irradiation due to its large band gap unless further functionalization or modifications are performed. Furthermore, recovery issue has always been a major drawback, if the more effective form nano particles are utilized.

The key objectives of this research were synthesizing new TiO2 based photocatalyst systems that are effective with both the UV and the visible light while utilizing novel superior environmentally friendly techniques enabling development of nano-structured photocatalysts that can be easily recovered. In this dissertation research, highly porous nano-structured TiO2/WO3/Fe3+ …

Control Of Smart Building Using Advanced Scada, Vivin Thomas Samuel

USF Tampa Graduate Theses and Dissertations

ABSTRACT

For complete control of the building, a proper SCADA implementation and the optimization strategy has to be build. For better communication and efficiency a proper channel between the Communication protocol and SCADA has to be designed.

This paper concentrate mainly between the communication protocol, and the SCADA implementation, for a better optimization and energy savings is derived to large scale industrial buildings. The communication channel used in order to completely control the building remotely from a distant place. For an efficient result we consider the temperature values and the power ratings of the equipment so that while controlling the …

Towards Rans Parameterization Of Vertical Mixing By Langmuir Turbulence In Shallow Coastal Shelves, Nityanand Sinha

USF Tampa Graduate Theses and Dissertations

Langmuir turbulence in the upper ocean is generated by the interaction between the wind-driven shear current and the Stokes drift velocity induced by surface gravity waves. In homogenous (neutrally stratified) shallow water, the largest scales of Langmuir turbulence are characterized by full-depth Langmuir circulation (LC). LC consists of parallel counter-rotating vortices aligned roughly in the direction of the wind. In shallow coastal shelves, LC has been observed engulfing the entire water column, interacting with the boundary layer and serving as an important mechanism for sediment re-suspension.

In this research, large-eddy simulations (LES) of Langmuir turbulence with full-depth LC in a …

One Dimensional Stochastic Coating Growth Kinetics Of Peg 3400 Onto Ammonium Nitrate In A Fluidized Bed, Brandon Smeltzer

USF Tampa Graduate Theses and Dissertations

Fluidized beds represent a cost effective, scalable technology invaluable to the chemical processing community as part of the global scheme of particle design. However, despite wide spread use and multiple approaches (empirical and mechanistic) to modeling a fluidized bed coating process, operations must be done at different scales due to changes within the balance of phenomenological forces (e.g. gravity, buoyancy, drag, surface tension, viscosity, kinetic energy).

Ammonium nitrate is synthetic compound that has multiple applications such as fertilizer, rocket fuel, and self-cooling applications. Ammonium nitrate has five temperature dependent crystal structures that are accompanied by a change in density. The …

Improving Implementation Of A Regional In-Line Chlorinator In Rural Panama Through Development Of A Regionally Appropriate Field Guide, Benjamin A. Yoakum

USF Tampa Graduate Theses and Dissertations

Access to safe drinking water has a direct effect on improving human health and their quality of life. One country still struggling with providing access to safe drinking water to all of its population is Panama. Panama's largest indigenous group, the Ngöbe people, is disproportionately affected by lack of access to safe drinking water. One way Panama's Ministry of Health (MINSA) is attempting to increase access to safe drinking water to the Ngöbe people is by disinfecting the water already captured by rural gravity fed water systems constructed within in the Ngöbe-Bugle reservation. This is accomplished using an in-line chlorinator …

Use Of Comsol Simulation For Undergraduate Fluid Dynamics Course, Hyun J. Kwon

Faculty Publications

The COMSOL software was used to introduce CFD and teach fluid dynamics more effectively. Introduction of CFD has become an important part of fluid dynamics in recent years; however, undergraduate students have less access to practical exposure to it, unless they take additional elective courses which are seldom offered in undergrad predominant institutes. Simulation has become an essential step in designing and optimizing process in many engineering problems. Therefore, the COMSOL simulation project was assigned to undergraduate CFD as a part of their term project to enhance their exposure to simulation software and help understanding the use of simulation on …