Engineering Commons^™

Computational Fluid Dynamics Modeling Of A Gravity Settler For Algae Dewatering, Scott A. Hug

ETD Archive

Algae are the future of lipid sources for biodiesel production. Algae can produce more biodiesel than soybean and canola oil and can be grown in more diverse locations. Algae concentrations are naturally around 0.1 by weight. Enough water must be removed for the algae level to reach 5 , the minimum concentration in which lipids can be used in the transesterification process for biofuel production is 5 . Current dewatering methods involve the use of settling tanks and centrifugation. The costs of centrifugation limit the commercial viability of algae based biodiesel. A novel inclined gravity settler design at Cleveland State …

Moving Horizon Estimation With Dynamic Programming, Mohan Kumar Ramalingam

ETD Archive

Moving Horizon Estimation(MHE) is a optimization based strategy to state estimation. It involves computation of arrival cost, a penalty term, based on the MHE cost function. Minimization of this arrival cost is done through various methods. All these methods use nonlinear programming optimization technique which gives the estimate. The main idea of MHE revolves around minimizing the estimation cost function. The cost function is dependent on prediction error computation from data and arrival cost summarization. The major issue that hampers the MHE is choosing the arrival cost for ensuring stability of the overall estimation and computational time. In order to …

A Microfluidic Platform To Quantify Spatio-Temporal Diffusion Of Chemo-Gradients Within 3d Scaffolds: Applications In Axonal Biology, Michael A. Sawonik

ETD Archive

Axonal outgrowth and guidance play an important role in wiring the developing and regenerating nervous system. The critical role of biomolecular gradients in facilitating this axonal sensitivity and directionality along specific trajectories needs to be elucidated for designing effective therapeutic treatments under injury or disease conditions. However, previous in vitro approaches based on micropipette assay or gel-turning assay proved to be unsuitable or inefficient for precise generation and quantification of diffusive gradients. In this study, we utilized a microfluidic device to generate and quantify physiologically-relevant biomolecular gradients in a simple and reliable manner. Using a combination of computational and experimental …

On The Analysis And Design Of Disturbance Rejecter, Jason Tatsumi

ETD Archive

In this thesis, the impact of the disturbance rejecter concept and the enforced plant has been explored. In order for the active disturbance rejection controller (ADRC) to provide a reasonable alternative to the industry standard PID controller, it is necessary to develop tuning procedures capable of providing adequate performance with reasonable stability margins. A focus should be placed upon the disturbance rejecter, as it is the heart and soul of ADRC. In this thesis, transfer function analysis of the enforced plant has been performed to connect ADRC with the tools from classical control. The relationship between the gain parameter and …

Evolutionary Ground Reaction Force Control Of A Prosthetic Leg Testing Robot, Ronald Davis.

ETD Archive

Typical tests of prosthetic legs for transfemoral amputees prove to be cumbersome and tedious. These tests are burdened by acclimation time, lack of repeatability between subjects, and the use of complex gait analysis labs to collect data. To create a new method for prosthesis testing, we design and construct a robot that can simulate the motion of a human hip. We discuss the robot from concept to completion, including methods for modeling and control design. Two single-input-single-output (SISO) sliding mode controllers are developed using analytical and experimental methods. We use human gait data as reference inputs to the controller. When …

Control Method For The Wind Turbine Driven By Doubly Fed Induction Generator Under The Unbalanced Operating Conditions, Xiangpeng Zheng

ETD Archive

This thesis illustrates the principle and the behavior for doubly fed electric machines used in variable speed wind power systems under the balanced and unbalanced operating conditions. A generalized control method for complete stator pulsating power elimination and harmonic elimination in grid currents with adjustable power factor of a doubly fed induction generator under the unbalanced operating conditions is proposed. The theoretical analysis of this proposed control method is presented and then demonstrated by the simulation in Powersim®. The grid ride-through-fault ability by using the proposed method is also tested

Computational Study Of Savonius Wind Turbine, Asmita C. Chinchore

ETD Archive

This project involves study of 2-Blade and 3-Blade Savonius vertical wind turbines positioned at different orientations. For a 2-Blade turbine the orientations considered were 0 degree, 45 degree, 90 degree and 135 degree in reference to the direction of the prevailing wind and for the 3-Blade turbine the orientations taken into account were 0 degree, 30 degree, 60 degree and 90 degree in reference to the direction of the prevailing wind. The basic aim of this thesis was to study how the two designs are different from each other and which design produces more power when applied with constant wind …

Vibration Analysis Of Anisotropic Plates, Special Case: Violin, Chaitanya J. Lomte

ETD Archive

This thesis presents vibration analysis of the top plate of Stradivari violin by creating a 3D model using SolidWorks and finding mode shapes and natural frequencies using SolidWorks simulation. The top plate was affixed to the bottom plate via a side wall following the contour of the violin plates. Assuming the input excitation is sinusoidal, it was applied at the location of bridge where the strings rest on it.. The static component of the force was calculated to be 83.17 N. The first five natural frequencies of the violin top plate are in the range of 150 to 450 Hertz. …

Aerodynamic Measurements Of A Variable-Speed Power-Turbine Blade Section In A Transonic Turbine Cascade, Ashlie B. Flegel

ETD Archive

The purpose of this thesis is to document the impact of incidence angle and Reynolds number variations on the 3-D flow field and midspan loss and turning of a 2-D section of a variable-speed power-turbine (VSPT) rotor blade. Aerodynamic measurements were obtained in a transonic linear cascade at NASA Glenn Research Center in Cleveland, OH. Steady-state data were obtained for ten incidence angles ranging from +15.8° to -51.0°. At each angle, data were acquired at five flow conditions with the exit Reynolds number (based on axial chord) varying over an order-of-magnitude from 2.12 ₉ 105 to 2.12 ₉ 106. Data …

Application Of Sliding Mode Controller And Linear Active Disturbance Rejection Controller To A Pmsm Speed System, Yang Zhao

ETD Archive

Permanent magnet synchronous motor (PMSM) is a popular electric machine in industry for its small volume, high electromagnetic torque, high reliability and low cost. It is broadly used in automobiles and aircrafts. However, PMSM has its inherent problems of nonlinearity and coupling, which are challenges for control systems design. In addition, the external disturbances such as load variation and noises could degrade the systems performance. Both sliding mode control (SMC) and active disturbance rejection control (ADRC) are robust against disturbances. They can also compensate the nonlinearity and couplings of the PMSM. Therefore, in this thesis, we apply both SMC and …

Determining The Mechanical Properties Of Lattice Block Structures, Nathan Wilmoth

ETD Archive

Lattice block structures and shape memory alloys possess several traits ideal for solving intriguing new engineering problems in industries such as aerospace, military, and transportation. Recent testing at the NASA Glenn Research Center has investigated the material properties of lattice block structures cast from a conventional aerospace titanium alloy as well as lattice block structures cast from nickel-titanium shape memory alloy. The lattice block structures for both materials were sectioned into smaller subelements for tension and compression testing. The results from the cast conventional titanium material showed that the expected mechanical properties were maintained. The shape memory alloy material was …

Nuts & Bolts, Volume 1, Issue 2

Friends of the Larsen Tractor Museum

New Exhibit Opens
Bill Splinter Memorial
Museum Needs
Fun Facts ... and other non-sense
From Lou's Desk by lou leviticus
Flipping A Fordson
What I've Learned notes from the manager
Museum Updates
Nuts & Bolts Staff:
Museum Guidance Committee:

Direct Flutter And Limit Cycle Computations Of Highly Flexible Wings For Efficient Analysis And Optimization, Bret Stanford, Philip Beran

United States Air Force: Publications

The usefulness of flutter as a design metric is diluted for wings with destabilizing (softening) nonlinearities, as a stable high-amplitude limit cycle (subcritical) may exist for flight speeds well below the flutter point. It is thus desired to design aeroelastic structures such that the post-flutter behavior is as benign (i.e., supercritical) as possible, among the other constraints commonly considered in the optimization process. In order to account for these metrics in an accurate and efficient manner, direct tools are utilized to first locate the Hopf-point (flutter speed), and then to obtain a nonlinear perturbation solution via the method of multiple …

A Mathematical Evaluation Of Hemodynamic Parameters After Carotid Eversion And Conventional Patch Angioplasty, Alexey Kamenskiy, Iraklis I. Pipinos, Yuris A. Dzenis, Prateek K. Gupta, Syed A. Jaffar Kazmi, Jason N. Mactaggart

Department of Mechanical and Materials Engineering: Faculty Publications

Carotid endarterectomy has a long history in stroke prevention, yet controversy remains concerning optimal techniques. Two methods frequently used are endarterectomy with patch angioplasty (CEAP) and eversion endarterectomy (CEE). The objective of this study was to compare hemodynamics-related stress and strain distributions between arteries repaired using CEAP and CEE. Mathematical models were based on in vivo three-dimensional arterial geometry, pulsatile velocity profiles, and intraluminal pressure inputs obtained from 16 patients with carotid artery disease. These data were combined with experimentally derived nonlinear, anisotropic carotid artery mechanical properties to create fluid-structure interaction models of CEAP and CEE. These models were then …

Effects Of Mode Coupling On The Admittance Of An At-Cut Quartz Thickness-Shear Resonator, Huijing He, Jiashi Yang, Wei-Ping Zhang, Ji Wang

Department of Mechanical and Materials Engineering: Faculty Publications

We study the effects of couplings to flexure and face-shear modes on the admittance of an AT-cut quartz plate thickness-shear mode resonator. Mindlin’s two-dimensional equations for piezoelectric plates are employed. Electrically forced vibration solutions are obtained for three cases: pure thickness-shear mode alone; two coupled modes of thickness shear and flexure; and three coupled modes of thickness shear, flexure, and face shear. Admittance is calculated and its dependence on the driving frequency and the length/thickness ratio of the resonator is examined. Results show that near the thickness-shear resonance, admittance assumes maxima, and that for certain values of the length/thickness ratio, …

Micromechanical Analysis Of Nanoparticle-Reinforced Dental Composites, Yi Hua, Linxia Gu, Hidehiko Watanabe

Department of Mechanical and Materials Engineering: Faculty Publications

The mechanical behavior of TiO₂ nanoparticle-reinforced resin-based dental composites was characterized in this work using a three-dimensional nanoscale representative volume element. The impacts of nanoparticle volume fraction, aspect ratio, stiffness, and interphase zone between the resin matrix and nanoparticle on the bulk properties of the composite were characterized. Results clearly demonstrated the mechanical advantage of nanocomposites in comparison to microfiber-reinforced composites. The bulk response of the nanocomposite could be further enhanced with the increased nanoparticle volume fraction, or aspect ratio, while the influence of nanoparticle stiffness was minimal. The effective Young’s modulus and yield strength of the composite was …

Crest-Snow Field Experiment: Analysis Of Snowpack Properties Using Multi-Frequency Microwave Remote Sensing Data, Tarendra Lakhankar, J. Munoz, A.M. Powell, N.Y. Krakauer, W.B. Rossow, Reza Khanbilvardi

Publications and Research

The CREST-Snow Analysis and Field Experiment (CREST-SAFE) was carried out during January–March 2011 at the research site of the National Weather Service office, Caribou, ME, USA. In this experiment dual-polarized microwave (37 and 89 GHz) observations were accompanied by detailed synchronous observations of meteorology and snowpack physical properties. The objective of this long-term field experiment was to improve understanding of the effect of changing snow characteristics (grain size, density, temperature) under various meteorological conditions on the microwave emission of snow and hence to improve retrievals of snow cover properties from satellite observations. In this paper we present an overview of …

Exact And Representative Algorithms For Multi Objective Optimization, Ozgu Turgut

Wayne State University Dissertations

In most real-life problems, the decision alternatives are evaluated with multiple conflicting criteria. The entire set of non-dominated solutions for practical problems is impossible to obtain with reasonable computational effort. Decision maker generally needs only a representative set of solutions from the actual Pareto front. First algorithm we present is for efficiently generating a well dispersed non-dominated solution set representative of the Pareto front which can be used for general multi objective optimization problem. The algorithm first partitions the criteria space into grids to generate reference points and then searches for non-dominated solutions in each grid. This grid-based search utilizes …

Bioreducible Polymer Nanosystems For Gene Delivery, Yi Zou

Wayne State University Dissertations

This dissertation describes the research of bioreducible polymers for gene delivery. A series of bioreducible poly(amido amine)s (PAAs) were synthesized. They complex with DNA forming polyplex nanoparticles and layer-by-layer (LbL) thin films as gene delivery vectors. Atomic force microscope (AFM), especially in situ real time AFM, provides a microscopic view of DNA release dynamics. It is shown that the depolymerization of bioreducible polymer triggers DNA release via disulfide-thiol exchange reaction. The AFM images revealed a three-stage pathway beginning with a morphological change from metastable nanostructures into the more favorable toroid structure. Then toroids interact with each other by aggregation and …

Engineering Problem Solving And Sustained Learning: A Mixed Methods Study To Explore The Dynamics Of Engineering Knowledge Creation, Rachel Itabashi-Campbell

Wayne State University Dissertations

This dissertation research explores processes by which engineering problem solving (EPS) results in sustained organizational learning. Approaching from a constructionist perspective, the study empirically examines the knowledge creation dynamics instigated by product-related problems using a mixed methods research approach. The research has identified the Japanese concept of ba, defined in this study as "shared experiential space," as a key construct that explains the phenomena of interest. A new framework that the study has developed, which interprets EPS as an epistemic journey to attain system-wide improvements, is highly complementary to the traditional structured routine based approaches to engineering operations and …

Optimization Of Strategic Planning Processes For Configurable Products: Considerations For Global Supply, Demand, And Sustainability Issues, Edward Lawrence Umpfenbach

Wayne State University Dissertations

The assortment planning problem is to decide on the set of products that a retailer or manufacturer will offer to its customers to maximize profitability. While assortment planning research has been expanding in recent years, the current models are inadequate for the needs of a configurable product manufacturer. In particular, we address assortment planning for an automobile manufacturer. We develop models to integrate assortment planning and supply chain management, designed for use by a large automaker in its strategic planning phase. Our model utilizes a multinomial logit model transformed into a mixed integer linear program through the Charnes-Cooper transformation. It …

Framework For Quantifying And Tailoring Complexity And Risk To Manage Uncertainty In Developing Complex Products And Systems, Darrell Williams

Wayne State University Dissertations

In recent years there has been a renewed interest in product complexity due its negative impact on launch performance. Research indicates that underestimating complexity is one of the most common errors repeated by new product development (NPD) teams. It was concluded that companies that successfully manage complexity can maintain a competitive advantage. This is particularly true of CoPS projects (Complex Products and Systems) which are defined as large-scale, high value, engineering intensive products and systems. Investment in CoPS projects continues to grow worldwide, with recent estimates placed at over $500B annually.

In this research we present methods to improve the …

Green Diesel Production Via Catalytic Hydrogenation/Decarboxylation Of Triglycerides And Fatty Acids Of Vegetable Oil And Brown Grease, Elvan Sari

Wayne State University Dissertations

Increase in the petroleum prices, projected increases in the world’s energy demand and environmental awareness have shifted the research interest to the alternative fuel technologies. In particular, green diesel, vegetable oil/animal fat/waste oil and grease derived hydrocarbons in diesel boiling range, has become an attractive alternative to biodiesel— a mixture of fatty acid methyl esters, particularly due to its superior fuel properties that are similar to petroleum diesel. Hence, green diesel can be used as a drop-in fuel in the current diesel engines. The current technology for production of green diesel– hydrodeoxygenation of triglycerides and fatty acids over conventional hydrotreating …

Demand Modeling And Capacity Planning For Innovative Short Life-Cycle Products, Saman Alaniazar

Wayne State University Dissertations

This dissertation focuses on demand modeling and capacity planning for innovative short life-cycle products. We first developed a new model in the class of stochastic Bass formulations that addresses the shortcomings of models from the extant literature. The proposed model considers the common fact that the market potential of a product is not fixed and might change during a life-cycle due to exogenous (e.g., economic- or competitors-related) or endogenous (e.g., quality-related) factors. Allowing this parameter (market potential in the Bass model) to follow a geometric random walk, we have showed that the future demand of a product in each period …

Investigation Of Pressure Fluctuations In The Hyporheic Zone In Response To Flow Around A Hydraulic Structure, Timothy Calappi

Wayne State University Dissertations

Erosion around a cylinders is a well studied field. Particles erode when lift and drag forces overcome a critical threshold. These forces are typically studied from above the water-riverbed interface. This study maps hyporheic pressure fluctuations as they are related to surface water velocity. The pressure map is used to evaluate lift enhancement and destabilization forces on the riverbed. High pressure events in the subsurface help generate a destabilizing force from within the riverbed. This work develops a probability distribution function relating turbulent velocity fluctuations and subsurface pressure fluctuations.

A cylinder was fitted with differential pressure transducers such that the …

Evaluating Chemical Toxicity: A Novel Behavioral Assay Using Daphnia, Maya A. Zein

Wayne State University Dissertations

Pharmaceuticals, and personal care products (PPCPs), and other emerging contaminants, such as pesticides, are increasingly being detected in the environment. Important sources of these contaminants are waste water treatment plants and agriculture. Many of these contaminants are biologically active at low concentrations, and may impair physiological processes in exposed organisms, alter reproductive, endocrine or immune system function, and ultimately affect fitness and survival. These chemicals are often found in the environment as complex mixtures, and this complicates their evaluation of their toxicity. There is a need for high-throughput assays to rapidly assess the toxicity of these emerging contaminants. A behavioral …

A Comparative Study Of Three Different Chemical Vapor Deposition Techniques Of Carbon Nanotube Growth On Diamond Films, Betty T. Quinton, Paul N. Barnes, Chakrapani V. Varanasi, Bang-Hung Tsao, Kevin J. Yost, Sharmila M. Mukhopadhyay

Mechanical and Materials Engineering Faculty Publications

This paper compares between the methods of growing carbon nanotubes (CNTs) on diamond substrates and evaluates the quality of the CNTs and the interfacial strength. One potential application for these materials is a heat sink/spreader for high-power electronic devices. The CNTs and diamond substrates have a significantly higher specific thermal conductivity than traditional heat sink/spreader materials making them good replacement candidates. Only limited research has been performed on these CNT/diamond structures and their suitability of different growth methods. This study investigates three potential chemical vapor deposition (CVD) techniques for growing CNTs on diamond: thermal CVD (T-CVD), microwave plasma-enhanced CVD (MPE-CVD), …

Nanomaterials Synthesis, Applications, And Toxicity 2012, Mallikarjuna Nadagouda, Dionysios Demetriou Dionysiou, Darren A. Lytle, Thomas F. Speth, Sharmila M. Mukhopadhyay

Mechanical and Materials Engineering Faculty Publications

Nanotechnology presents new opportunities to create better materials and products. Nanomaterials find wide applications in catalysis, energy production, medicine, environmental remediation, automotive industry, and other sectors of our society. Nanomaterial-containing products are already available globally and include automotive parts, defense application, drug delivery devices, coatings, computers, clothing, cosmetics, sports equipment, and medical devices. This special issue includes emerging advances in the field, with a special emphasis given to nanomaterial synthesis and applications.

Evaluation Of Non-Stationarity In Annual Maximum Flood Series Of Moderately Impaired Watersheds In The Upper Midwest And Northeastern United States, Neila Salvadori

Dissertations, Master's Theses and Master's Reports - Open

United States federal agencies assess flood risk using Bulletin 17B procedures which assume annual maximum flood series are stationary. This represents a significant limitation of current flood frequency models as the flood distribution is thereby assumed to be unaffected by trends or periodicity of atmospheric/climatic variables and/or anthropogenic activities. The validity of this assumption is at the core of this thesis, which aims to improve understanding of the forms and potential causes of non-stationarity in flood series for moderately impaired watersheds in the Upper Midwest and Northeastern US. Prior studies investigated non-stationarity in flood series for unimpaired watersheds; however, as …

Post-Project Assessment Of Pit Latrines In Rural Panama, Jacob B. Midkiff

Dissertations, Master's Theses and Master's Reports - Open

In Panama, one of the Environmental Health (EH) Sector’s primary goals is to improve the health of rural Panamanians by helping them to adopt behaviors and practices that improve access to and use of sanitation systems. In complying with this goal, the EH sector has used participatory development models to improve hygiene and increase access to latrines through volunteer managed latrine construction projects. Unfortunately, there is little understanding of the long term sustainability of these interventions after the volunteers have completed their service. With the Peace Corps adapting their Monitoring, Reporting, and Evaluation procedures, it is appropriate to evaluate the …