Engineering Commons^™

Cpacs Happenings (April 1978 Newsletter), College Of Public Affairs And Community Service, University Of Nebraska At Omaha

CPACS Newsletters

The College of Public Affairs and Community Service (CPACS) newsletter that reported on the news, collaborations, events, and general happenings of the UNO College of Public Affairs and Community Service. This newsletter has had many names and variations over the years including SPACS Newsletter (1973); Newsletter of the College of Public Affairs and Community Service (1973-1974): Happenings (1974-1980s); and the current e-newsletter titled the CPACS Collective (2021-)

Tests On Puddle Weld Connections, William Mcguire, J. W. Struble, Teoman Peköz

CCFSS Library (1939 - present)

PREFACE This non-interpretive report contains the results of 90 tests on circular and oblong puddle weld connections. The connections involved test specimens constructed of flat steel plates and thin connecting sheets of varying thicknesses (10 to 28 gage) with the welds to be studied forning the bond between them. Testing consisted of tensile loading to ultimate failure. This work was carried out under contract with the Engineering Division of the American Iron and Steel Institute.

Green-Extension Systems At High-Speed Intersections [Apr. 1978], Charles V. Zegeer, Robert C. Deen

Kentucky Transportation Center Research Report

The purpose of this study was to determine the effectiveness of green-extension systems (GES) for reducing the dilemma-zone problem associated with the amber phase of traffic signals at high-speed intersections. Reactions of 2,100 drivers were noted during the amber phase at nine Intersections, and the dilemma-zone distances with respect to the stop bar were determined.

Simulation Of Mechanical Rotation By Optical Rotation: Application To The Design Of A New Fourier Photopolarimeter, R. M.A. Azzam

Electrical Engineering Faculty Publications

The mechanical rotation of an optical element around the axis of a beam of polarized light can be easily simulated by using the phenomenon of optical rotation. Because optical rotation can be magnetically or electrically induced, virtually any kind of mechanical rotation can be mimicked. This interesting principle is applied to the design of a new Fourier photopolarimeter that uses an oscillating-azimuth retarder (OAR). The OAR consists of a quarter-wave plate surrounded by two ac-excited Faraday cells that produce equal and opposite sinusoidal optical rotations. Analysis of the operation of this polarimeter of no moving parts proves its ability to …

Generalized Ellipsometry Based On Azimuth Measurements Alone, R. M.A. Azzam

Electrical Engineering Faculty Publications

We investigate the azimuth response function, θ_o = f(θ_i), of a linear nondepolarizing optical system S, whereθ_i and θ_o, are the azimuths (orientations) of the generally elliptic vibrations of totally polarized light at the input and output of S. We find that the azimuth response function depends on five of the six parameters that specify the normalized circular Jones matrix of the optical system. Thus the entire polarization response of an optical system can be nearly completely reconstructed from its azimuth response alone. Five input-output azimuth measurements (θ_ik, θ_ok), k …

Acoustic Emission And Fatigue Characteristics Of Typical Bridge Steels, Theodore Hopwood Ii, James H. Havens

Kentucky Transportation Center Research Report

Acoustic emission monitoring was used during tensile tests of low-carbon structural steels to determine the physical characteristics of the acoustic emission phenomena. Results indicate that acoustic emissions are caused by micro-plastic deformation processes (i.e., dislocation motion).

A series of axial-fatigue tests was performed on several types of structural steels, some of which had extensive service in bridges. There was no apparent relation between specimen load histories and subsequent performance in fatigue tests. Tensile tests of specimens subjected to extensive fatigue testing, at stresses below the yield strength of the material, revealed no major difference in mechanical properties or acoustic emission …

Relativistic Scattered-Wave Theory Ii. Normalization And Symmetrization, Cary Y. Yang

Electrical and Computer Engineering

Formalisms for normalization and symmetrization of one‐electron Dirac scattered‐wave wavefunctions are presented. The normalization integral consists of one‐dimensional radial integrals for the spherical regions and an analytic expression for the intersphere region. Symmetrization drastically reduces the size of the secular matrix to be solved. Examples for planar Pb₂Se₂ and tetrahedral Pd₄ are discussed.

Atomic Hydrogen Storage Method And Apparatus, John A. Woollam

Department of Electrical and Computer Engineering: Faculty Publications

Atomic hydrogen, for use as a fuel or as an explosive, is stored in the presence of a strong magnetic field in exfoliated layered compounds such as molybdenum disulfide or an elemental layer material such as graphite. The compound is maintained at liquid helium temperatures and the atomic hydrogen is collected on the surfaces of the layered compound which are exposed during delamination (exfoliation). The strong magnetic field and the low temperature combine to prevent the atoms of hydrogen from recombining to form molecules.

Leaf Spot Of Field Corn Caused By Pseudimonas Andropogonis, Anne K. Vidaver, Randall R. Carlson

Biological Process Development Facility: Staff Publications

A leaf spot of field corn was shown to be caused by the bacterium Pseudomonas andropogonis. Leaf spot symptoms were observed over 3 years in several States. Inoculation of corn by vacuum infiltration of the bacteria was necessary to reproduce field symptoms.

A bacterial leaf spot disease of different cultivars of field corn was observed in early summer of 1973, 1974, and 1975. Leaves with essentially the same symptoms were obtained from South Dakota, Iowa, Kansas, Nebraska, and Michigan. The same symptoms were also seen in Wisconsin. Symptoms consisted of circular to ellipsoidal, tan to brown spots, with irregular …

The Effect Of Antimony, Chloride Ion, And Glue On Copper Electrorefining, Thomas J. O'Keefe, L. R. Hurst

Materials Science and Engineering Faculty Research & Creative Works

A study has been made to determine the effect of antimony, chloride ion, and glue on copper electrorefining. All deposits were made at a temperature of 65° C on a titanium cathode. Current densities of 398 A m-2 and 133 A m-2 were used. The deposits were analyzed by scanning electron microscopy (SEM) and X-ray diffraction (XRD) to determine morphology and crystal orientation. Atomic absorption (AA) and Auger spectroscopy (AES) were used to study the chemical composition of the deposits and a simple bend test was used to determine structural integrity. It was found that when the antimony concentration in …

Relativistic Xα–Scattered‐Wave Calculations For The Uranyl Ion, Cary Y. Yang, K. H. Johnson, J. A. Horsley

Electrical and Computer Engineering

Relativistic Xα–scattered‐wave molecular orbital calculations have been carried out on the uranyl ion UO²₂+. The calculated orbital eigenvalues are in good agreement with the results of a recent x‐ray photoelectron spectroscopy study of uranyl compounds. An interpretation of the optical spectrum of the uranyl ion in terms of a Hund’s case (c) (ω, ω) coupling scheme is given.

Development Of Procedures For Preparation Of The Interstate Safety Improvement Program, Jerry G. Pigman, Kenneth R. Agent, Charles V. Zegeer

Kentucky Transportation Center Research Report

This report summarizes background information and presents the development of procedures for preparing and updating the lnterstate Safety Improvement Program. There are two major sections: (1) development of procedures for identifying safety needs and (2) development of procedures for prioritizing safety needs. Related to the identification of needs are eleven subsections which are based on historical data, inventories of existing facilities, and analysis of current data. Several accident surveillance procedures were used to identify sites, sections, and elements of the roadway which warrant improvements. Procedures for prioritizing safety needs are based on summaries of data from two reports by the …

Simulation Of External-Internal And Through Trips For Small Urban Areas, Jerry G. Pigman

Kentucky Transportation Center Research Report

The objective of this study was to develop models which would simulate internal-external trips and external-external (through) trips. Regression analysis and cross-classification of data were tested in an attempt to predict the number of internal-external trips and the percentage of through trips. Regression analysis was used in the development of a through-trip distribution model. Grouping data for analysis created some problems; however, trial-and-error evaluation enabled selection of variables which produced reasonable results. Variables found to be most significant in the development of internal-external models were population and employment. For through-trip models, variables used were population, functional classification, AADT at the …

Heating Bridge Decks By Electrical Resistance, James H. Havens, Wm. Vernon Azevedo, Assaf S. Rahal, Robert C. Deen

Kentucky Transportation Center Research Report

The 9th-Street interchange was designed and constructed with an automated electrical heating system for snow and ice removal. This report describes the heating system, its construction, and initial operation. The heating system was capable of keeping the interchange free of ice and snow accumulation. The average daily slab temperature fell below 0°C (32°F) on only one occasion. The average cost of electrical power for heating the interchange was $1,075 per day.

The National Solar Heating And Cooling Information Center, Jeremy A. Lifsey, Sanford Zane Meschkow

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The Center is an information service funded by the U.S. Department of Housing and Urban Development and the U.S. Department of Energy as part of a program to foster the use of solar energy in domestic hot water systems and the heating and cooling of buildings. The Center answers questions by mail and over toll-free hot lines, operates a mobile exhibit van and several exhibits that appear at conferences and trade shows, and distributes HUD and DOE publications on solar energy. Users can request lists of addresses of solar design and construction professionals, manufacturers, distributors, banks that have given solar …

Energy From Swine Manure, J. R. Fischer, E. L. Iannotti, D. M. Sievers

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This paper discusses results of anaerobically digesting swine manure. Facts and figures are given on utilization of the energy from the anaerobic digester. Design parameters and some of the biochemical changes that occur during digestion are also given.

5th Annual Umr-Dnr Conference On Energy -- Entire Proceedings, University Of Missouri--Rolla

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This volume is a collection of refereed papers presented at the Fifth Annual UMR-DNR Conference on Energy held at the University of Missouri--Rolla on the dates of October 10 - 12, 1978.

Guided by the President's goal of energy independence by 1980, the UMR-DNR Conference on Energy organized in 1974 with the purpose of providing social scientists, scientists and engineers a means for rapid communication of their most recent research results in the field of energy and to offer solutions to the energy related problems of local government, business, industry and the general public. Since that time, there has been …

Strength Of Arc-Spot Weld In Sheet Steel Construction, Ching Fung

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The weld used by the steel deck erectors to anchor steel decking to structural steel framing is commonly known as "Puddle Weld". It is formed by arc-welding with stick electrodes to "melt" through the deck, resulting in puddle of molten steel durinlj the welding operation. Hence, the weld is commonly referred to in the trade as "Puddle Weld". Since the inception of this research projE:ct, this type of weld has been given a new technical name -the "Arc-Spot Feld" to reflect the actual welding process and the formation of the weld.

Replicating Bales Problem Solving Experiments On A Computerized Conference: A Pilot Study, Computerized Conferencing & Communications Center, Starr Roxanne Hiltz, Kenneth Johnson, Gail Agle

Computerized Conferencing and Communications Center Reports

Computerized Conferencing is a new form of communication in which the participants type their comments into a computer terminal, and receive their instructions and the comments of others printed on their terminal. This is a report on the results of a pilot study which was aimed mainly at exploring and solving the methodological problems presented by the need to adapt the procedures for conducting and coding face-to-face discussions to studies of this new medium. It represents the first set of controlled experiments on group discussions via a computerized conference.

The independent variable in this pilot study was mode of communication …

Research Options And Imperatives In Computerized Conferencing, Computerized Conferencing & Communications Center, Murray Turoff, Philip Enslow, Starr Roxanne Hiltz, John Mckendree, Raymond Panko

Computerized Conferencing and Communications Center Reports

This is the report resulting from a computerized conferencing workshop held on the subject of potential research opportunities and requirements in the area of utilizing a computer to aid human communications. It was sponsored by the Division of Mathematical and Computer Sciences of the National Science Foundation (grant # MCS76-80514). The views expressed in this report are those of the authors, and do not necessarily reflect NSF views or policy.

The workshop utilized the Electronic Information Exchange System (EIES) at the New Jersey Institute of Technology.

Test 1270: Allis-Chalmers 5020 Dsl, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1286: Kubota L185 Dt Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1295: Case 2090 Powershift Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Steel Deck Institute Design Manual For Form Decks And Roof Decks, Steel Deck Institute

Steel Deck Institute (SDI) Specifications and Manuals (1939 - present)

No abstract provided.

Phase 1 Inspection Report: National Dam Safety Program. Osage - Gasconade Basin. Little Prairie Dam, Phelps County, Missouri, Anderson Engineering, Inc., Springfield, Missouri, Hanson Engineers, Inc., Springfield, Illinois

Missouri Dam Safety Inspection Reports

This report presents the results of field inspection and evaluation of the Little Prairie Dam. It was prepared under the National Program of Inspection of Non-Federal Dams.

Testing Of Solar Collectors By A Standard Method, Harry J. Sauer Jr., Bassem F. Armaly

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

A description of the recently adopted standard for testing solar collectors "ASHRAE STANDARD 93-77, METHOD OF TESTING SOLAR COLLECTORS BASED ON THERMAL PERFORMANCE" is presented. Results from the standard could be used to simulate the transient performance of an installed solar system.

Electronic Fuel Injection Techniques For Hydrogen Fueled Internal Combustion Engines, Carl Arthur Maccarley

Electrical Engineering

Numerous studies have demonstrated the advantages of hydrogen as a fuel for Otto Cycle engines due to high thermal efficiency and low exhaust pollutant levels. Characteristic of hydrogen engine operation using pre-mixed intake charge formation is a problem of pre-ignition resulting in an intake manifold "backfire." Additional problems include high NO production when using certain equivalence ratios and power output degradation due to low fuel energy/volume density.

Techniques for direct and manifold fuel injection are discussed as means for overcoming these problems. Emphasis is placed on the need for total engine control, integrating control of fuel injection, ignition timing, intake …

New Perspectives On The Materials Interface With The Three E'S -- Energy, Environment And Economics, Donald S. Remer

All HMC Faculty Publications and Research

New perspectives are presented on the material interface with the three E's -- Energy, Environment, and Economics. The past, present, and future energy picture is described from 1850 through the year 2030. The major energy sources such as oil, natural gas, coal, nuclear, and several new emerging energy options are compared and contrasted. The lead time, capital, and materials required for bringing on-stream new energy sources is described. Previous U.S. energy forecasts are reviewed and are found to be too optimistic. The U.S. materials situation is outlined with an emphasis on per capita materials use and the critical role that …

Test 1268: Same Tiger 100 Dsl, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1282: Steiger Tiger Iii St-450 And St-470 6-Speed (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …