Engineering Commons^™

Experimental Analysis Of The Integrated High-Lift Propulsor, Robert W. Deters, Byron Ward, Shreyas Narsipur

Publications

Wind tunnel testing was conducted to evaluate the performance of the Integrated High Lift Propulsor (IHLP), a novel Distributed Electric Propulsion (DEP) system. The IHLP integrates traditional Krueger flap/slat elements with a Distributed Electric Propulsion design, enhancing high lift performance and cruise efficiency compared to conventional pylon-mounted DEP configurations. Starting from a baseline configuration determined from pretest Computational Fluid Dynamics (CFD) analyses, a parametric study was performed to determine the influence on the aerodynamic characteristics (���� , ����, and ����). The study involved variations in flap settings, slat angles, overlap, propeller tilt, and propeller position. The impact of Reynolds number, …

Process Optimization For Syngas Production From The Dry Reforming Of Methane Over 5ni+3sr/10zr+Al Catalyst Using Multiple Response Surface Methodology, Ahmed Al-Fatesh Dr., Mai H. Roushdy, Radwa El-Salamony Dr., Saba Alwan Dr., Ahmed Osman Dr., Sadeq Al-Faresh Dr., Hamid Ahmed Dr., Anis Fakeeha Dr., Ahmed Ibrahim Dr.

Chemical Engineering

5Ni+3Sr/10Zr+Al catalyst is synthesized using the impregnation method, characterized, and tested for dry reforming of methane. The influence of reaction temperature, feed ratio (CO2/CH4), and gas hour space velocity are examined using multiple response surface methodology through three factors in, a four-level central composite design. Second and higher-order regression models are applied to evaluate the interaction between the process parameters and responses. The results indicate that the reaction temperature is the most influential followed by the space velocity, while the feed ratio has a weak effect. The optimum values that maximize each of the response variables are found to be …

Profess 12 – Project Report Pr3: Briefing Document For Co-Creation Exercise, Una Beagon, Margaret Morgan, Ruchita Jani, Brian Bowe

Reports

This document was prepared as a guide for co-creation exercises which are carried out with students to help design the PROFESS 12 Summer School. The briefing document has been prepared with information on how the co-creation exercise (in the form of a 2 hour workshop) will be facilitated and also includes background material which can be issued to students to prepare them for the event.

Implementation Profile: Modeling Environment (Doe-Psu-0000922-3), Sean Keene, Midrar Adham, Robert B. Bass

Electrical and Computer Engineering Faculty Publications and Presentations

This implementation profile provides the scope, background, and requirements necessary to implement a Modeling Environment (ME) to test a Distributed Energy Resource (DER) Management System (DERMS). A DERMS is used by an aggregator to dispatch large numbers of DERs in order to provide grid services to a Grid Operator. The ME addresses scalability issues inherent to Hardware-in-the-Loop DERMS simulation; a large number of assets are needed in order to observe effects on the grid from deployment and dispatch of DERs.

Implementation Profile: Egot Derms Server/Client System (Doe-Psu-0000922-2), Tylor Slay, Robert B. Bass

Electrical and Computer Engineering Faculty Publications and Presentations

This implementation profile (IP) provides the scope and requirements necessary to implement a distributed energy resource management system (DERMS), which networks large numbers of DER within an energy grid of things (EGoT). This document originated as part of a U.S. DOE-funded project to develop a DERMS based on a set of rules known as the Energy Services Interface (ESI). The ESI serves as an umbrella, ensuring the information exchange between an aggregator and DER owners conforms to expectations: protect privacy, provide security, develop trustworthiness, and ensure interoperability. DERMS developers use the ESI to ensure that information exchange meets these expectations. …

Product Specification: Distributed Trust Model System (Doe-Psu-0000922-4), Narmada Sonali Fernando, Abdullah Barghouti, Robert B. Bass, John M. Acken

Electrical and Computer Engineering Faculty Publications and Presentations

A Distributed Trust Model (DTM) System is a supervisory component within an energy grid of things. The role of a DTM System is to implement the trust aspects of an energy services interface. The DTM System augments existing security measures by monitoring the communication between the various EGoT System actors and quantifying metrics of trust of each actor.

Product Specification: Distributed Control Module (Doe-Psu-0000922-5), Nicole Henderson, Kai Zeng, Robert B. Bass

Electrical and Computer Engineering Faculty Publications and Presentations

This product specification describes the architecture, implementation, and hardware descriptions of a Distributed Control Module (DCM) prototype. A DCM is an enabling technology for distributed energy resources (DER). DERs are grid-enabled generation, storage, and load devices that are owned by utility customers. DCMs enable information exchange between a distributed energy resource management system (DERMS) and DERs for the purpose of networking large numbers of DERs. The DCM prototype described within this document enables DER participation in a service-oriented aggregation system. A DERMS server provides IEEE 2030.5 smart energy resource services to DCM clients using a request/response information exchange process. DCMs …

Psu Derms Operating Manual And Egot System Reference (Doe-Psu-0000922-7), Tylor Slay, Robert B. Bass

Electrical and Computer Engineering Faculty Publications and Presentations

This document guides the user of the Portland State University Distributed Energy Resource Management System in configuration and normal operation. For direct access to the underlying code and its usage see the accompanying PSU EGoT System Reference. The system reference outlines all classes and methods used through the Energy Grid of Things system including applications, models, interfaces and the entity component system.

On Progress In Exploring Controlled Viscous Limit-Cycle Oscillations In Modified Glauert Airfoil, Ethan Deweese, Lap Nguyen, Erik Vataker, William Mackunis, Vladimir Golubev, Ron Efrati, Oksana Stalnov

Publications

The paper reports on the progress in the development of a novel robust, nonlinear flow control technology that employs an array of synthetic-jet actuators (SJAs) embedded in 2-DOF, elastically mounted, optimized Modified Glauert (MG) airfoil design in order to control limit cycle oscillations (LCO) at low subsonic flow regimes. The focus here is on the conceptual design of the wind energy harvesting system that employs, e.g., a piezoelectric device to extract energy from plunging LCO, with the closed-loop controller being capable to sustain the required LCO amplitudes over a wide range of wind speeds. The current high-fidelity studies first include …

Energy Services Interface (Doe-Psu-0000922-1), Robert B. Bass

Electrical and Computer Engineering Faculty Publications and Presentations

This document defines a set of rules known as the Energy Services Interface (ESI), which “establish a bi-directional, service-oriented, logical interface to support secure, trustworthy information exchange between an aggregator and distributed energy resources (DERs). These exchanges facilitate energy interactions between the DERs and the aggregator, thereby allowing the aggregator to provide grid services through dispatch of the DERs.” The ESI serves as an umbrella, ensuring the information exchange between an aggregator and DER owners conforms to expectations: protect privacy, provide security, develop trustworthiness, and ensure interoperability. DERMS developers use the ESI to ensure that information exchange meets these expectations.

Experimental Environmental Profiles And Sloshing Dynamics Aboard Zero-G Aircraft, Pedro J. Llanos, Sathya Gangadharan, Kevin Crosby

Publications

This study presents the results of a parabolic flight experiment to study the sloshing dynamics of the magneto-active propellant management device experiment. This device utilizes a magnetoactive membrane and magnets located external to the tank to effectively damp the liquid free surface motion. This research work establishes a benchmark with sloshing analytical formulation and sensor calibration methods that can be used to characterize future research parabolic flights while providing important environmental profiles measured during flight, such as accelerations, pitch angle, velocity, temperature, total volatile content, carbon dioxide, relative humidity, magnetic field, and radiation. Correlation between these flight variables and the …

Priority Skills For Engineers On The Island Of Ireland: Key Stakeholder Perceptions, Rosalind M Henry, Margaret Morgan, Una Beagon, Ruchita Jani, Janet Mckennedy, Brian Bowe

Reports

Executive Summary

Life on a shared island, in particular the island of Ireland (comprising Ireland and Northern Ireland), presents both challenges and opportunities, including for engineers tasked with addressing problems to help solve the SDGs that are indifferent to boundaries. Research demonstrates that (relative to current engineers) the engineer of the future will require a more diverse range of skills to navigate an increasingly complex work environment. Given this context, identification of relevant priority skills would therefore prove useful in focusing engineering educational initiatives.

Building on a European study (Beagon et al, 2022a) which identified at a European level the …

Machine Embroidery Of Light-Emitting Textiles With Multicolor Electroluminescent Threads, Seungse Cho, Taehoo Chang, Tianhao Yu, Sunland L. Gong, Chi Hwan Lee

Purdue University Libraries Open Access Publishing Fund

Advances in electroluminescent threads, suitable for weaving or knitting, have opened doors for the development of light-emitting textiles, driving growth in the market for flexible and wearable displays. Although direct embroidery of these textiles with custom designs and patterns could offer substantial benefits, the rigorous demands of machine embroidery challenge the integrity of these threads. Here, we present embroiderable multicolor electroluminescent threads—in blue, green, and yellow—that are compatible with standard embroidery machines. These threads can be used to stitch decorative designs onto various consumer fabrics without compromising their wear resistance or light-emitting capabilities. Demonstrations include illuminating specific messages or designs …

Vacuum Lift Apparatus, Ruben Adorno, Anthony N. Palazotto

AFIT Patents

An apparatus for lifting a load to a desired altitude using an evacuated hollow lift body is disclosed. Once evacuated, the apparatus is lighter than the surrounding atmosphere. The lift body can be formed as a hollow fluid tight structure with a tube wound and sealed in a helical pattern or a dual membrane structure with a pressurized intermediate volume sandwiched between inner and outer membranes. A load can be attached to the apparatus and lifted to an altitude where the effective density of the apparatus and load is equivalent to the density of the surrounding atmosphere.

Thermo-Photo Catalytic Anode Process For Carbonate-Superstructured Solid Fuel Cells, Hanrui Su, Yun Hang Hu

Michigan Tech Publications

Converting hydrocarbons and greenhouse gases (i.e., carbon dioxide, CO2) directly into electricity through fuel cells at intermediate temperatures (450 to 550 °C) remains a significant challenge, primarily due to the sluggish activation of C-H and C=O bonds. Here, we demonstrated a unique strategy to address this issue, in which light illumination was introduced into the thermal catalytic CO2reforming of ethane in the anode as a unique thermo-photo anode process for carbonate-superstructured solid fuel cells. The light-enhanced fuel activation led to excellent cell performance with a record-high peak power density of 168 mW cm-2at an intermediate temperature of 550 °C. Furthermore, …

A Prediction Of Interfacial Tension By Using Molecular Dynamics Simulation: A Study On Effects Of Cushion Gas (Co2, N2 And Ch4) For Underground Hydrogen Storage, Quoc T. Doan, Alireza Keshavarz, Caetano R. Miranda, Peter Behrenbruch, Stefan Iglauer

Research outputs 2022 to 2026

Carbon Dioxide (CO2) emissions from fossil fuel consumption have caused global warming and remain challenging problems for mitigation. Underground Hydrogen Storage (UHS) provides clean fuel and replaces traditional fossil fuels to reduce emissions of CO2. Geological formations such as depleted oil/gas reservoirs, deep saline aquifers and shale formations have been recognized as potential targets to inject and store H2 into the subsurface formations for large-scale implementation of CCS and UHS. However, the presence of H2 with cushion gas at different fractions under different geo-storage conditions, which can influence Hydrogen's flow properties, was not investigated widely. Until now, studies of interfacial …

Taiwan’S Semiconductor Strategy: A Developmental State Model For Economic Growth, Christine Vuu

CISLA Senior Integrative Projects

No abstract provided.

Immersive Engineering Learning And Workforce Development: Pushing The Boundaries Of Knowledge Acquisition In A Cave, Opeyemi Peter Ojajuni, Brian Warren, Fareed Dawan, Yasser Ismail, Albertha Lawson

Faculty Publications

This study provides insight into the use of virtual reality (VR) to enhance engineering curriculums and develop engineering students’ computational thinking (CT) levels at Historically Black College and Universities (HBCUs). The sample population for this research includes students enrolled in a first-year engineering course at an HBCU. To support the students’ education in cybersecurity additive manufacturing, virtual reality was used to simulate classroom teaching and assignments. Participants in this study were first taught using the traditional method that allowed them passive viewing of images and videos of objects and spaces. The participants were later taught the same lessons in a …

Repeated Healing Of Low Velocity Impact Induced Damage In Orthogrid-Stiffened Sandwich Panel, Patrick Mensah, Guoqiang Li, Obed Tetteh

Faculty Publications

Herein, we present a new sandwich panel composed of a carbon fiber grid-stiffened shape memory vitrimer (SMV) core. The sandwich panels were fabricated via a pin-guided dry-weaving technology, and their impact responses were evaluated via low-velocity impact testing. The main failure mode observed after the first round of impact was the transverse cracking of the SMV matrix in the sandwich core. The healing efficiency according to the crack initiation energy (CIE) was found to be 76.5% after the first healing cycle. Even after the second healing cycle, the healing efficiency was greater than 72%. From the low-velocity impact tests, reinforcing …

Self-Healing Of Macroscopic Cracks In Concrete By Cellulose Fiber Carried Microbes, Emmanuel Igbokwe, Samuel Ibekwe, Patrick Mensah, Ogad Agu, Guoqiang Li

Faculty Publications

This research introduces a new approach to healing millimeter scale cracks in concrete using Lysinibaccilus Sphaericus Bacteria (LSB) encapsulated in cellulose fibers. Cracking in concrete, particularly macroscopic cracking, can cause premature structural failure and reduce its lifespan, which is a critical industry challenge. While bacteria encapsulated in cellulose fibers have been used to heal cement mortar, the studies are limited to heal much narrower cracks. In this study, we integrate LSB, known for its strong biocalcification abilities, with the protective environment of cellulose fibers, which are renewable and sustainable, for healing millimeter scale cracks in ordinary cement concrete. To understand …

Experimental Data For: "Effects Of Network Connectivity And Functional Diversity Distribution On Human Collective Ideation", Yiding Cao, Yingjun Dong, Minjun Kim, Neil G. Maclaren, Sriniwas Pandey, Shelley D. Dionne, Francis J. Yammarino, Hiroki Sayama

Systems Science and Industrial Engineering Faculty Scholarship

This is the dataset collected from our online human-subject experiments described in the following manuscript:

Yiding Cao, Yingjun Dong, Minjun Kim, Neil G. MacLaren, Sriniwas Pandey, Shelley D. Dionne, Francis J. Yammarino, and Hiroki Sayama:
"Effects of Network Connectivity and Functional Diversity Distribution on Human Collective Ideation"
https://arxiv.org/abs/2307.04284

Inclusive Counterfactual Generation: Leveraging Llms In Identifying Online Hate, M. Atif Qureshi, Arjumand Younus, Simon Caton

Articles

Counterfactually augmented data has recently been proposed as a successful solution for socially situated NLP tasks such as hate speech detection. The chief component within the existing counterfactual data augmentation pipeline, however, involves manually flipping labels and making minimal content edits to training data. In a hate speech context, these forms of editing have been shown to still retain offensive hate speech content. Inspired by the recent success of large language models (LLMs), especially the development of ChatGPT, which have demonstrated improved language comprehension abilities, we propose an inclusivity-oriented approach to automatically generate counterfactually augmented data using LLMs. We show …

Explainable Ai For 6g Use Cases: Technical Aspects And Research Challenges, Shen Wang, M. Atif Qureshi, Luis Miralles-Pechu{\'A}N, Thien Huynh-The, Thippa Reddy Gadekallu, Madhusanka Liyanage

Articles

Around 2020, 5G began its commercialization journey, and discussions about the next-generation networks (such as 6G) emerged. Researchers predict that 6G networks will have higher bandwidth, coverage, reliability, energy efficiency, and lower latency, and will be an integrated “human-centric” network system powered by artificial intelligence (AI). This 6G network will lead to many real-time automated decisions, ranging from network resource allocation to collision avoidance for self-driving cars. However, there is a risk of losing control over decision-making due to the high-speed, data-intensive AI decision-making that may go beyond designers’ and users’ comprehension. To mitigate this risk, explainable AI (XAI) methods …

Tough Monolayer Silver Nanowire-Reinforced Double-Layer Graphene, Yanxiao Li, Congjie Wei, Steven E. Kooi, David Veysset, Chuanrui Guo, Yuxiang Gan, Ying Zhuo, Genda Chen, Mohammad Naraghi, Keith A. Nelson, Chenglin Wu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Mixed-dimensional nanomaterials composed of one-dimensional (1D) and two-dimensional (2D) nanomaterials, such as graphene-silver nanowire (AgNW) composite sandwiched structures, are promising candidates as building blocks for multifunctional structures and materials. However, their mechanical behavior and failure mechanism have not yet been fully understood. In this work, we have performed integrated experimental, theoretical, and numerical studies to explore the performance and failure modes of graphene-AgNW composite under tensile and impact loading conditions. In situ tensile tests using a nano indenter, implemented with a push-to-pull device and a laser-induced projectile impact test system, are used to shed light on load-bearing mechanisms in graphene-AgNW …

Identifying And Exploring Construction Pm Evolution And Research Directions, Jeffrey S. Russell, Islam H. El-Adaway, Ramy Khalef, Fareed Salih, Gasser Ali

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Project Management (PM) Is The Process Of Organization, Allocation, And Control Of Resources To Achieve A Specific Goal. Previously, PM Focused On Planning And Executing Projects According To Predetermined Objectives, But It Has Evolved To Include The Use Of Technology To Aid In Managing And Delivering Projects. However, No Research Has Provided A Comprehensive Analysis Of This PM Evolution. To Fill This Gap, This Data-Driven Study Conducted A Scientometric Analysis, Using PM-Related Research Papers, To Identify The PM Evolution Along The Holistic Life Cycle Of Its Knowledgebase. The Findings Of This Study Identify Four Distinct PM Phases: PM 1.0, PM …

Analyzing The Impact Of Db Versus Dbb On Cost Performance In Airport Development: A Data-Driven Approach, Ramy Khalef, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Construction Of Airport Projects Can Be Complex And Costly Due To The Many Stakeholders Involved And Associated Strict Timelines. Traditional Delivery Methods, Such As Design-Bid-Build (DBB), Employed In Airport Projects Often Result In Major Cost Overruns Due To Multiple Facets. Design-Build (DB) Is A Construction Method That Combines Design And Construction Under A Single Entity, And It Has The Potential To Improve Cost Performance. None Have Evaluated DB From A Cost Perspective In The Airport Sector. This Research Fills This Gap. First, The Data Is Collected And Assessed For Validity. Second, Risk Ratings For Cost Performance Are Computed. Finally, …

Data-Driven Analysis Of Progressive Design Build In Water And Wastewater Infrastructure Projects, Fareed Salih, Radwa Eissa, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The United States has invested heavily in water and wastewater infrastructure projects to address growing demand and aging systems. To ensure the effective delivery of these projects, agencies are shifting toward alternative delivery methods such as progressive design build (PDB), which has demonstrated accelerated schedule and enhanced cost performance across the literature as well as multiple projects compared to traditional DB. This has raised a need for evaluating PDB's state of adoption and performance in the water and wastewater sector. To this end, the authors: (1) conducted descriptive and statistical analyses of the 21 PDB water and wastewater projects available …

A Holistic Approach To Exploring The Root Factors Of Work Zone Accidents, Bahaa Chammout, Muaz O. Ahmed, Islam H. El-Adaway, William Lieser

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Work zones are crucial for infrastructure maintenance and improvement. However, ongoing projects within work zones sometimes can place workers and drivers in dangerous situations. Despite safety regulations, work zone accidents persist with notable severity and frequency. Previous research has explored work zone accident causation, but it has not provided a comprehensive understanding of the factors that impact work zone safety. This paper addresses this research gap by following a multistep methodology. First, a systematic literature review (SLR) was conducted to identify a comprehensive list of 37 factors impacting work zone safety. Second, social network analysis (SNA) was employed to analyze …

An Automated On-The-Go Unloading System Reduces Harvest Operator Stress Relative To Manual Operation, Travis A. Burgers, Kusha Kamarei, Mukund Vora, Matthew Horne

Mechanical Engineering Faculty Publications

On-the-go unloading improves harvest operational efficiency, but it requires skilled labor because it is challenging and stressful to balance numerous concurrent tasks. Harvest automation reduces workload, stress, and fatigue. The objective of this study was to determine if using a commercially available, automated on-the-go unloading system (Raven Cart Automation TM , RCA, Raven Industries) would reduce operator stress com- pared to manual operation. Nine grain cart tractor operators and six combine operators participated in this study. Operators performed their typical harvest operation, except to alternate on-the-go unloading using RCA or operating manually. Skin conductance (elec- trodermal activity) was measured with …

Process Simulation For Converting Co2 Emissions From The Cementindustry To Dimethyl Ether, Nour Abou Seada, Dina Aboelela

Biochemical Engineering

Climate change is the leading severe problem in the twenty-first century, which is associated with greenhouse gas emissions,carbon dioxide that is the foremost cause of global warming and super greenhouse effect. In this concern, to avoid hazardousproblems, the steady stream of CO2 effluents existing in the atmosphere must be transformed to beneficial products for beingused as an abundant chemical feedstock. Implementing a new green strategy, which is known for the catalytic hydrogenationof CO2 into alternative fuels and valuable chemicals, will be a long-lasting solution to alleviate CO2 emissions. In this paper,a process simulation showing the synthesis of dimethyl ether (DME) …