Engineering Commons^™

Multifidelity Comparison Of Supersonic Wave Drag Prediction Methods Using Axisymmetric Bodies †, Troy Abraham, David Lazzara, Douglas Hunsaker

Mechanical and Aerospace Engineering Student Publications and Presentations

Low-fidelity analytic and computational wave drag prediction methods assume linear aerodynamics and small perturbations to the flow. Hence, these methods are typically accurate for only very slender geometries. The present work assesses the accuracy of these methods relative to high-fidelity Euler, compressible computational-fluid-dynamics solutions for a set of axisymmetric geometries with varying radius-to-length ratios (R/L). Grid-resolution studies are included for all computational results to ensure grid-resolved results. Results show that the low-fidelity analytic and computational methods match the Euler CFD predictions to around a single drag count (~1.0 × 10^–4) for geometries with R/L ≤ 0.05 …

Assessing The Cooling/Lubricating Agencies For Sustainable Alternatives During Machining Of Nimonic 80: Economic And Environmental Impacts, Mayur A. Makhesana, Harsh Vesuwala, Kaushik M. Patel, Ana Vafadar, Murat Sarikaya, Navneet Khanna

Research outputs 2022 to 2026

Developing sustainable manufacturing methods that balance environmental and economic aspects is challenging. A comprehensive analysis of the economics of machining and carbon emissions is essential to encourage adopting sustainable practices. This work presents the machinability and comparative sustainability analysis of Nimonic 80 superalloy when it is machined utilizing a novel, environmentally friendly vegetable oil-based hybrid nanofluid-minimum quantity lubrication (MQL) and liquid carbon dioxide (LCO2) technique. The main objective is to comprehend the efficacy of the proposed approach on tool life, surface roughness, power consumption, total machining costs, and carbon emissions. Compared to other machining conditions, the use of hybrid nanofluid-MQL …

Developing More Useful Equity Measurements For Flood-Risk Management, Adam Pollack, Casey Helgeson, Carolyn Kousky, Klaus Keller

Dartmouth Scholarship

Decision-makers increasingly invoke equity to motivate, design, implement and evaluate strategies for managing flood risks. Unfortunately, there is little guidance on how analysts can develop measurements that support these tasks. Here we analyse how equity can be defined and measured by surveying 167 peer-reviewed publications that explicitly state an interest in equity in the context of flood-risk management. Our main result is a taxonomy that systematizes how equity has been, and can be, defined and measured in flood-risk research. The taxonomy embodies how equity is a pluralistic and unavoidably ethical concept. Despite this, we find that most quantitative studies fail …

Performance Of High-Dose Reclaimed Asphalt Mixtures (Raps) In Hot In-Place Recycling Based On Balanced Design, Lei Jiang, Junan Shen, Wei Wang

Civil Engineering & Construction: Faculty Publications

This study endeavors to employ a balanced design methodology, aiming to equilibrate the resistance to rutting and cracking exhibited by hot in-place recycling asphalt mixtures containing a high dose of reclaimed asphalt pavement (RAP). The primary goal is to ascertain the optimal amount of new binder necessary for practical engineering applications, ensuring a balanced rutting and crack resistance performance of recycled asphalt mixtures. The investigation mainly employed wheel-tracking tests and semi-circular bending tests to assess the rutting and cracking performance of recycled asphalt mixtures with a different dose of RAP (in China, it is common to use RAP with 80% …

Designed For Life: Unearthing Just And Sustainable Urban Design Through The Daylighting Of Phalen Creek, Corgan R. Archuleta

Geography Honors Projects

This thesis conceptualizes a relational approach to urban design. Often separated from justice, I argue urban design can shape spaces to enable respectful and reciprocal human and more-than- human relationships. Focusing on Phalen Creek in Saint Paul, Minnesota, I illuminate just and sustainable possibilities between ecologically sustainable and socially inclusive design. Phalen Creek was a natural waterway buried in a pipe during 20th century urbanization to be partially reconstructed through daylighting. The Indigenous and Immigrant stories driving restoration expand urban design’s liberatory potential. Combining just sustainabilities with infrastructure theory and Indigenous Knowledges, I contend urban design offers a relational approach …

Kinetics-Based Inference Of Environment-Dependent Microbial Interactions And Their Dynamic Variation, Hyun-Seob Song, Na-Rae Lee, Aimee K. Kessell, Hugh C. Mccullough, Seo-Young Park, Kang Zhou, Dong-Yup Lee

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Microbial communities in nature are dynamically evolving as member species change their interactions subject to environmental variations. Accounting for such context-dependent dynamic variations in interspecies interactions is critical for predictive ecological modeling. In the absence of generalizable theoretical foundations, we lack a fundamental understanding of how microbial interactions are driven by environmental factors, significantly limiting our capability to predict and engineer community dynamics and function. To address this issue, we propose a novel theoretical framework that allows us to represent interspecies interactions as an explicit function of environmental variables (such as substrate concentrations) by combining growth kinetics and a generalized …

Farm Electricity System Simulator (Fess): A Platform For Simulating Electricity Utilisation On Dairy Farms, F. Buckley, J. Upton, R. Prendergast, L. Shalloo, Michael D. Murphy

Publications

The objective of this paper was to define, validate and demonstrate a model capable of accurately simulating dairy farm electricity consumption across varying herd and parlour sizes, to facilitate research investigating renewable energy systems (RES) and demand side management (DSM). The Farm Electricity System Simulator (FESS) was developed using grey-box modelling techniques utilizing empirical data for parameter tuning. Empirical data were gathered from nine spring calving, pasture based dairy farms located in the Republic of Ireland. A k-means clustering analysis was conducted, separating the farms into three, near homogenous groups, from which representative farms were selected. FESS was trained using …

Electron-Phonon Interaction Mediated Gigantic Enhancement Of Thermoelectric Power Factor Induced By Topological Phase Transition., Zhi Li, Koushik Pal, Huiju Lee, Chris Wolverton, Yi Xia

Mechanical and Materials Engineering Faculty Publications and Presentations

We propose an effective strategy to significantly enhance the thermoelectric power factor (PF) of a series of 2D semimetals and semiconductors by driving them toward a topological phase transition (TPT). Employing first-principles calculations with an explicit consideration of electron-phonon interactions, we analyze the electronic transport properties of germanene across the TPT by applying hydrogenation and biaxial strain. We reveal that the nontrivial semimetal phase, hydrogenated germanene with 8% biaxial strain, achieves a considerable 4-fold PF enhancement, attributed to the highly asymmetric electronic structure and semimetallic nature of the nontrivial phase. We extend the strategy to another two representative 2D materials …

A Tilted Broad Plume Underneath The Greenland Cratonic Keels, Dan Wang, Stephen S. Gao, Yangyang Liao, Kelly H. Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

To advance our comprehension of the complex geological history and mantle dynamics in the north atlantic region, we employ all available broadband seismic data recorded in greenland to reveal an abnormal mantle transition zone (mtz) structure. Central and eastern greenland exhibits depressed 410 and 660 km discontinuities (d410 and d660, respectively) bordering the mtz, indicative of a substantial thermal anomaly associated with an underlying plume, surpassing the 1,800°c threshold for post-garnet phase transitions at the d660. Variations in mtz thickness across greenland stem from differing temperature anomalies at the d410 and d660, possibly linked to a tilted plume within the …

Theoretical Model Of Femtosecond Coherence Spectroscopy Of Vibronic Excitons In Molecular Aggregates, Alexander J. Rode, Paul C. Arpin, Daniel B. Turner

Materials Science and Engineering Faculty Publications and Presentations

When used as pump pulses in transient absorption spectroscopy measurements, femtosecond laser pulses can produce oscillatory signals known as quantum beats. The quantum beats arise from coherent superpositions of the states of the sample and are best studied in the Fourier domain using Femtosecond Coherence Spectroscopy (FCS), which consists of one-dimensional amplitude and phase plots of a specified oscillation frequency as a function of the detection frequency. Prior works have shown ubiquitous amplitude nodes and π phase shifts in FCS from excited-state vibrational wavepackets in monomer samples. However, the FCS arising from vibronic-exciton states in molecular aggregates have not been …

Hardness Of Single Phase High Entropy Carbide Ceramics With Different Compositions, Paul M. Brune, Gregory E. Hilmas, William G. Fahrenholtz, Jeremy Lee Watts, Caillin J. Ryan, Chris M. Desalle, Douglas E. Wolfe, Stefano Curtarolo

Materials Science and Engineering Faculty Research & Creative Works

Five High Entropy Carbide Ceramics, (Hf0.2,Nb0.2,Ta0.2,Ti0.2,Zr0.2)C, (Cr0.2,Hf0.2,Ta0.2,Ti0.2,Zr0.2)C, (Hf0.2,Mo0.2,Ta0.2,Ti0.2,Zr0.2)C, (Hf0.2,Ta0.2,Ti0.2,W0.2,Zr0.2)C, and (Hf0.2,Mo0.2,Ti0.2,W0.2,Zr0.2)C, Were Synthesized by Carbothermal Reduction of Oxides and Direct Current Sintering. the Five High Entropy Carbide Ceramics Were Determined to Be Nominally Phase-Pure with Relative Densities of More Than 98.9% and Mean Grain Sizes of Less Than 5 Μm. Average Vickers Hardness Values Ranged from 19.2 ± 0.4 GPa for (Hf0.2,Nb0.2,Ta0.2,Ti0.2,Zr0.2)C at a Load of 2 Kgf to 43.5 ± 0.4 GPa for (Hf0.2,Mo0.2,Ti0.2,W0.2,Zr0.2)C at a Load of 0.05 Kgf. Hardness Generally Increased with Increasing the Valence Electron Concentration and Strain as Measured by the Williamson-Hall Analysis. However, Neither …

Optimal Environmental And Economic Performance Trade-Offs For Fifth Generation District Heating And Cooling Network Topologies With Waste Heat Recovery, Michael D. Murphy

Publications

Network topology greatly influences both the economic and environmental performance of fifth generation district heating and cooling (5GDHC) systems. In this study the optimal trade-offs between the environmental and economic performance of 5GDHC network topologies for a five-building district with waste heat recovery were explored. A life cycle assessment method was used to calculate the total life cycle CO2 emissions (LCCO2) associated with the installation and operation of various network topologies. Twelve months of empirical data from a data center cooling system were analyzed to assess its suitability for integration into a 5GDHC system. The most suitable method for utilizing …

Guidelines For Data Collection On Energy Performance Of Higher-Education Buildings In Egypt: A Case Study, Hesham Safwat, Ahmed A. Abdel-Rehim, Iman El-Mahallawi, Abdelwahab Hussein, Engy Elshazly, Ahmad Elshamy

Mechanical Engineering

Reliable energy analysis of buildings relies heavily on high-quality data leading to proper indicators. Previous studies have highlighted the importance of data quality in analyzing energy usage in residential and non-residential buildings in order to transform declarations to actions, optimise energy efficiency policies and monitor progress and failures in countries. Collected data must adhere to national and international standards for energy performance in buildings. This study aims to provide practical guidelines for effectively collecting and preparing data suitable for evaluating energy performance in Egyptian higher-education (HE) buildings. The guidelines are developed based on a comprehensive case study, considering data availability …

Channel Prediction For Underwater Acoustic Communication: A Review And Performance Evaluation Of Algorithms, Haotian Liu, Lu Ma, Zhaohui Wang, Gang Qiao

Michigan Tech Publications

Underwater acoustic (UWA) channel prediction technology, as an important topic in UWA communication, has played an important role in UWA adaptive communication network and underwater target perception. Although many significant advancements have been achieved in underwater acoustic channel prediction over the years, a comprehensive summary and introduction is still lacking. As the first comprehensive overview of UWA channel prediction, this paper introduces past works and algorithm implementation methods of channel prediction from the perspective of linear, kernel-based, and deep learning approaches. Importantly, based on available at-sea experiment datasets, this paper compares the performance of current primary UWA channel prediction algorithms …

Integrated Analysis Of Economic Optimization And Life Cycle Assessment For A Fully Modular Wheelchair Accessibility Ramp Utilizing Recyclable Materials, Nicolas Whelan

Honors Scholar Theses

In response to the growing emphasis on sustainability and accessibility in infrastructure development, this research paper delves into the optimization of economic opportunities presented by fully modular wheelchair accessibility ramps. By integrating principles of modularity, recyclability, and circular design, these ramps offer a promising solution to the dual challenges of accessibility and environmental impact. The study employs interdisciplinary methods, merging design, economics, and environmental sustainability, to evaluate the feasibility and potential of these innovative ramp designs. Central to the analysis is the application of a Life Cycle Assessment (LCA) to quantify the environmental impact and carbon footprint associated with modular …

Measuring Soot In A Novel Configuration For Diffusion Flames Fueled By Ethylene Doped With Iso-Dodecane, Christian Bjork

Honors Scholar Theses

Sustainable Aviation Fuels (SAFs) are seen as the path forward for decarbonizing hard-to-electrify sectors. Using SAFs over traditional fossil fuels abates carbon dioxide emissions but still may present soot emission problems. A milestone in the abatement of soot would be understating its formation mechanisms.

This study aims to quantify soot products resulting from an ethylene flame doped with iso-dodecane, a surrogate SAF component. The burner selected for the investigation is the novel Planar Mixing Layer Flame (PMLF) which allows the tracking of soot formation with the height above the burner (HAB) in a stable diffusion flame. A baseline ethylene-fueled flame …

Analyzing The Effects Of Atmospheric Turbulent Fluctuations On The Wake Structure Of Wind Turbines And Their Blade Vibrational Dynamics, Alayna Farrell, Fernando Ponta, Apurva Baruah

Michigan Tech Publications

In recent trends, a rising demand for renewable energy has driven wind turbines to larger proportions, where lighter blade designs are often adopted to reduce the costs associated with logistics and production. This causes modern utility-scale wind turbine blades to be inherently more flexible, and their amplified aeroelastic sensitivity results in complex multi-physics reactions to variant atmospheric conditions, including dynamic patterns of aerodynamic loading at the rotor and vortex structure evolutions within the wake. In this paper, we analyze the influence of inflow variance for wind turbines with large, flexible rotors through simulations of the National Rotor Testbed (NRT) turbine, …

Lessons From Immersive Online Collaborative Modeling To Discuss More Adaptive Reservoir Operations, David E. Rosenberg

Civil and Environmental Engineering Faculty Publications

This work had the purpose to provoke discussion about more adaptive reservoir operations. This work created online collaborative modeling environments by using web spreadsheets (Google Sheets) during a video conference session. In each session, up to 6 collaborators immersed in water user roles. Then the collaborators consumed, saved, and traded water in response to their available water, other choices, and real-time discussion of choices. The collaboration was an alternative to prior offline or high-performance computing efforts that programmed water allocation rules to try to satisfy forecasted water demands across hydrologic scenarios. The collaboration also differed from prior efforts that excluded …

Study Of Interface Charges Between In-Situ Grown Dielectric And Gan/Algan Hfet Structure By Metal-Organic Chemical Vapor Deposition, Muhammad Hassan Tahir, Nifat Jahan, Md Ghulam Zakir

Faculty Publications

The integration of an oxide layer in metal-oxide-semiconductor high electron mobility transistors (MOSHFETs) plays a crucial role in minimizing gate leakage current and enabling wider gate voltage swings. In this study, we present the fabrication and characterization of GaN/AlGaN heterostructure field-effect transistors (HFETs) capped with a Ga₂O₃ dielectric layer. The oxide was deposited via an in-situ process within a single MOCVD reactor without vacuum interruption. Our findings demonstrate that the in-situ capped HFETs exhibit a significantly lower interface charge density of 4 × 10¹² cm⁻² compared to 1 × 10¹³ cm⁻²·eV⁻¹ observed in ex-situ grown counterparts. These results highlight the …

Study Of Indium-Silicon Co-Doped Gallium Oxide For Effective N-Type Doping, Muhammad Hassan Tahir, Nifat Jahan, Md Ghulam Zakir

Faculty Publications

We present the research efforts to achieve effective n-type doping in gallium oxide (Ga2O3), an ultrawide bandgap semiconductor, grown by metal-organic chemical vapor deposition (MOCVD). The application of semiconductors for power electronics requires wide and ultrawide bandgap materials that can be doped to create higher electron (n-type) or hole (p-type) densities. Ga2O3, with a bandgap of 4.9 eV, is an emerging and promising material. The bandgap of Ga2O3 is much higher than other wide bandgap material that have been adopted by or in the process of adoption by the industry for power electronics. However, the doping of Ga2O3 has some …

Gallium Oxide Based Avalanche Photo Detector, Muhammad Hassan Tahir Mr, Nifat Jahan, Md Ghulam Zakir

Faculty Publications

Gallium oxide (Ga₂O₃), an ultrawide bandgap semiconductor with a bandgap of 4.6 eV and a high critical electric field of 10.3 MV/cm, offers strong potential for high-performance avalanche photodetectors (APDs). This project explores the design and characterization of a Ga₂O₃-based APD featuring doped and undoped epitaxial layers optimized for high electric field generation and low thermal conductivity, enabling stable operation in high-temperature environments. Simulation results show a uniform electric field of 1 MV/cm under a 100 V applied bias, while material characterization confirms excellent surface smoothness with a mean roughness of ~1.1 nm and an electron mobility of 21.7 cm²/V·s …

Winter Precipitation Analysis: Comparing Integrated Multi-Satellite Retrievals For Global Precipitation Measurement (Imerg) From Satellites With Ground Instrumentation Observation, Zoe Alber

Honors Scholar Theses

The main goal of the following thesis is to evaluate the accuracy and reliability of satellite-based precipitation measurements during a winter storm event by comparing them with ground-based observations. This study is divided into several key sections, each addressing a specific aspect of the analysis. The introduction provides background information and establishes the scope of the study, highlighting the importance of accurately measuring winter precipitation for forecasting and climate studies. The subsequent literature review explores the historical context, modern uses, and future trends in winter storm detection and precipitation modeling. Then, this study explores conceptual framework utilized throughout the research …

A Review Of Electrically Conductive Cement Concrete Pavement For Sustainable Snow-Removal And Deicing: Road Safety In Cold Regions, Mohammad Anis, Mohamed Abdel-Raheem

Civil Engineering Faculty Publications

Within cold U.S. regions, winter storms can cause interruptions in transportation networks, affecting transportation entities’ revenue streams. Conventional snow-removal methods on roadways efficiently remove snow and ice, yet their adverse environmental impacts further make winter maintenance more challenging. In response to these concerns, electrically conductive cement concrete (ECCC) pavement has become an effective alternative for deicing and snow melting on road surfaces. ECCC utilizes the Joule heating principles to effectively melt snow and ice by incorporating conductive elements into conventional concrete. This paper comprehensively reviews the current literature on ECCC pavement. Previous studies have diligently explored various aspects of ECCC …

A Synergistic Approach To Outreach And Teaching: Combining Service Learning At The College Level With A Summer Hands-On Outreach Program In Chemical And Biomolecular Engineering For High School Girls, Geeta Verma, Sogol Asaei, Jacob D. Hostert, Rebecca Ahn, Julie N. Renner

Faculty Scholarship

A synergetic approach to combine service learning at the university level with a high school outreach program is described. A holistic view is presented by discussing the importance of outreach and service learning, survey results, and outcomes. Overall, it was found that the unique program increased the self-efficacy (belief about one’s abilities) of students ranging from high school to graduate level, and positively impacted the social responsibility attitudes of university student participants.

Towards A Study Protocol: A Data-Driven Workflow To Identify Error Sources In Direct Ink Write Mechatronics, Hein Htet Aung, Quynh D. Tran, Pawan K. Tripathi, Roger H. French, Laura S. Bruckman

Faculty Scholarship

Using Direct Ink Write (DIW) technology in a rapid and large-scale production requires reliable quality control for printed parts. Data streams generated during printing, such as print mechatronics, are massive and diverse which impedes extracting insights. In our study protocol approach, we developed a data-driven workflow to understand the behavior of sensor-measured X- and Y-axes positional errors with process parameters, such as print velocity and velocity control. We uncovered patterns showing that instantaneous changes in the velocity, when the build platform accelerates and decelerates, largely influence the positional errors, especially in the X-axis due to the hardware architecture. Since DIW …

Comparison Of Four In Vitro Test Methods To Assess Nucleus Pulposus Replacement Device Expulsion Risk, Tahmanna Rahman, Matthew J. Kibble, Gianluca Harbert, Nigel Smith, Erik Brewer, Thomas P. Schaer, Nicolas Newell

Rowan-Virtua School of Translational Biomedical Engineering & Sciences Departmental Research

Background

Nucleus replacement devices (NRDs) are not routinely used in clinic, predominantly due to the risk of device expulsion. Rigorous in vitro testing may enable failure mechanisms to be identified prior to clinical trials; however, current testing standards do not specify a particular expulsion test. Multiple methods have therefore been developed, complicating comparisons between NRD designs. Thus, this study assessed the effectiveness of four previously reported expulsion testing protocols; hula-hoop (Protocol 1), adapted hula-hoop (Protocol 2), eccentric cycling (Protocol 3), and ramp to failure (Protocol 4), applied to two NRDs, one preformed and one in situ curing.

Methods

Nucleus material …

Comparison Of Four In Vitro Test Methods To Assess Nucleus Pulposus Replacement Device Expulsion Risk, Tamanna Rahman, Matthew J. Kibble, Gianluca Harbert, Nigel Smith, Erik Brewer, Nicholas Newell

Rowan-Virtua School of Translational Biomedical Engineering & Sciences Departmental Research

Background: Nucleus replacement devices (NRDs) are not routinely used in clinic, predominantly due to the risk of device expulsion. Rigorous in vitro testing may enable failure mechanisms to be identified prior to clinical trials; however, current testing standards do not specify a particular expulsion test. Multiple methods have therefore been developed, complicating comparisons between NRD designs. Thus, this study assessed the effectiveness of four previously reported expulsion testing protocols; hula-hoop (Protocol 1), adapted hula-hoop (Protocol 2), eccentric cycling (Protocol 3), and ramp to failure (Protocol 4), applied to two NRDs, one preformed and one in situ curing. Methods: Nucleus material …

Stress And Exercise In Part 141 Flight Students, Reece Curcio, Thomas Vincent Hayes, Reon Porter, Brooke Wheeler

Aeronautics Student Publications

This study explores how stress levels relate to exercise habits among aviation students in a Part 141 collegiate flight program. There was no correlation between stress and exercise. This outcome was unexpected as the hypothesis was an inverse relationship between perceived stress and exercise.

Passenger Insight On Sustainable Flight: Exploring The Relationships Between Attitudes And Risk Propensity On Willingness To Fly, Kayla Hylan, Carl A. Thomas Jr., Vivek Sharma, Brooke Wheeler

Aeronautics Student Publications

Passengers were generally accepting of sustainable aircraft, but compared to jet fuel, higher general risk propensity (GRiP) was more predictive of willingness to fly (WF) in sustainable aircraft. Sustainable attitudes strongly related to WF in sustainable aviation fuels (SAF) but had a weaker relationship on WF in electric and hydrogen aircraft, compared to jet fuel.

Applications, Challenges, And Research Issues For Enabling A Uav Swarm, Jennifer Hahner

Senior Honors Theses

Unmanned aerial vehicle (UAV) swarms have the potential to be useful in numerous applications due to their versatility and ability to operate without human intervention. However, this promising technology still requires further investigation, research, and testing before UAV swarms can be implemented extensively. The level of human intervention needed to control the system determines the differing levels of autonomy for UAV swarms. For swarms to become more independent, efficient algorithms for task and path planning are essential. In addition, accurate communication is essential for swarms to be able to coordinate and accomplish tasks successfully. This paper seeks to provide a …