Engineering Commons^™

Space 101 (Eps Electrical Power System), Shane Topham

Space Dynamics Laboratory Publications

Introduction

• Power Storage (Battery)
• Power Generation (Solar Arrays)
• Power Regulation & Distribution
• Other EPS functions

Integrating Satellite-Based Precipitation Analysis: A Case Study In Norfolk, Virginia, Imiya M. Chathuranika, Dalya Ismael

Engineering Technology Faculty Publications

In many developing cities, the scarcity of adequate observed precipitation stations, due to constraints such as limited space, urban growth, and maintenance challenges, compromises data reliability. This study explores the use of satellite-based precipitation products (SbPPs) as a solution to supplement missing data over the long term, thereby enabling more accurate environmental analysis and decision-making. Specifically, the effectiveness of SbPPs in Norfolk, Virginia, is assessed by comparing them with observed precipitation data from Norfolk International Airport (NIA) using common bias adjustment methods. The study applies three different methods to correct biases caused by sensor limitations and calibration discrepancies and then …

A Review Of Infrared Thermography Applications For Civil Infrastructure, Prabal Shrestha, Onur Avci, Sahabeddin Rifai, Feras Abla, Michael Seek, Karl Barth, Udaya Halabe

Engineering Technology Faculty Publications

Civil infrastructure is continuously subject to aging and deterioration due to multiple factors, which lead to a decline in performance and impact structural health. Accumulated damage on structures increases operational costs and poses significant risks to public safety. Effective maintenance, repair, and rehabilitation strategies are needed to ensure civil infrastructure’s overall safety and reliability. Non-Destructive Evaluation (NDE) methods are utilized to assess latent damage and provide decision-makers with real-time information for mitigating hazards. Within the last decade, there has been a significant increase in the research and development of innovative NDE techniques to improve data processing and promote efficient and …

Evaluating The Effectiveness Of Stay-In-Place Forms To Improve The Tosional Stability Of Box Beam Bridges During Erection, Karl E. Barth, Michael W. Seek, Gregory K. Michaelson, Dimitra Pyrialakou, Brook T. Woldegabriel

Engineering Technology Faculty Publications

Cold-formed tub girders provide an effective steel solution for short-span bridges. The girders are often delivered with an open top with stay-in-place forms installed on site. Walkways may be installed to the side of the girder that can induce significant torsion rotations in the open cross section. Full scale tests on girder specimens have shown that installing one or two panels of stay in place forms at the ends of the girder can significantly reduce the torsion rotation of the girder by providing warping resistance. Cantilever tests on the stay in place forms are performed to investigate the influence of …

A Comprehensive Academic And Industrial Survey Of Blockchain Technology For The Energy Sector Using Fuzzy Einstein Decision-Making, Umit Cali, Annabelle Lee, Barry Hayes, Claudio Lima, D. Jonathan Sebastian-Cardenas, David Flynn, Emre Kantar, Farrokh Rahimi, Kaung Si Thu, Marco Pasetti, Marthe Fogstad Dynge, Merlinda Andoni, Muhammet Deveci, Murat Kuzlu, Raquel Alanso, Kim-Kwang Raymond Choo, Sambeet Mishra, Shammya Shananda Saha, Sonam Norbu, Srinikhil Gourisetti, Ugur Halden, Vahid Hosseinezhad, Valentin Robu

Engineering Technology Faculty Publications

The global energy sector is undergoing a significant transformation driven by decarbonization and digitalization, leading to the emergence of Distributed Ledger Technology (DLT) — particularly blockchain — as a promising tool for enhancing transparency, security, and efficiency in modern power systems. This study aims to provide a comprehensive academic and industrial survey of blockchain applications in the energy sector and develop a robust decision-making framework to identify and prioritize the most promising real-world use cases based on multidisciplinary criteria. A three-stage methodology was adopted: (i) a literature and market review encompassing over 300 academic publications and commercial blockchain initiatives in …

Integrating Sustainable Practices Into Lean Engineering: Applying The Engineering For One Planet Framework In Manufacturing Engineering Technology Education, Dalya Ismael, Vukica M. Jovanovic, Murat Kuzlu, Charles Lowe, Lisa Bosman

Engineering Technology Faculty Publications

A growing number of manufacturers are recognizing significant financial and environmental benefits from adopting sustainable business practices. Sustainable manufacturing refers to the production of goods through processes that are economically sound, minimize environmental impact, and conserve energy and natural resources. Lean engineering, a comprehensive approach to decision-making and leadership within manufacturing organizations, has proven effective in driving sustainable practices. Key strategies include waste elimination, value identification, value stream mapping, flow creation, pull system establishment, and continuous improvement. Both lean manufacturing and sustainability share a common focus on minimizing waste. Lean principles address seven types of waste: transport, inventory, motion, waiting, …

Using Quanser Platform To Introduce Engineering Technology Students To Autonomous Vehicles, Otilia Popescu, Logan Beaver, Murat Kuzlu, Krishnanand Kaipa

Engineering Technology Faculty Publications

The area of autonomous vehicles is not new, but the latest advances in various technologies gave it a new boost in the last decade and it keeps growing in interest. However, undergraduate curricula rarely include courses specific to this area, which is considered mostly an interdisciplinary graduate field. While various programs introduce students to the background needed to understand and approach the field, specific work on autonomous vehicle projects is left for extra curriculum activities or student clubs, and eventually for senior (capstone) projects. This paper presents the work of a team of electrical engineering technology students on an autonomous …

5g-Enabled Iot Gateway For Educational Purposes, Murat Kuzlu

Engineering Technology Faculty Publications

The project aims to develop and implement a 5G-IoT gateway for efficient management and interconnection of IoT devices through advanced sensing and communication technologies. Sensing technologies encompass modern approaches for detecting and measuring physical properties with high accuracy across manufacturing, smart grids, healthcare, smart cities, and other domains. Communication technologies represent the latest developments in high-speed data transmission, offering enhanced reliability and network capacity. This 5G-IoT gateway functions as an educational platform, providing students and educators with hands-on experience in emerging technologies. The system creates opportunities for practical learning and research in telecommunication technologies by enabling direct engagement with 5G …

Advancing Sustainability In Civil Engineering Technology Through The Engineering For One Planet Framework, Dalya Ismael, Vukica M. Jovanovic, Murat Kuzlu, Charles Lowe, Lisa Bosman

Engineering Technology Faculty Publications

As global environmental challenges intensify, integrating sustainability into engineering technology education is increasingly critical. Yet, many programs lack comprehensive methods to embed sustainability principles, leaving graduates underprepared to address real-world environmental issues. Courses on sustainability often approach it in isolated or superficial contexts, unable to capture its complexity. The purpose of this study is to showcase one approach for embedding the Engineering for One Planet (EOP) framework into the Sustainable Building Practices course within the Civil Engineering Technology Department. The newly developed curriculum integrated learning outcomes from three EOP topics: Environmental Impact Assessment, Materials Selection, and Systems Thinking. Students were …

Flipped Classroom Techniques In A Thermodynamics Course In Engineering Technology, Nathan Luetke, Orlando Ayala, Vukica Jovanovic

Engineering Technology Faculty Publications

Teaching undergraduate thermodynamics presents numerous challenges to educators due to its inherently complex and abstract nature. The vast array of applications in engineering requires educators to strike a balance between theoretical principles and practical examples, thereby creating a meaningful and applicable learning experience. This paper presents an approach to teaching an undergraduate thermodynamics course in engineering technology developed over four consecutive semesters blending traditional lecture-based teaching with flipped classroom techniques. The teaching methods used, and modifications made each semester are presented along with student performance.

Differential Equations' Coverage In Circuits And Heat Transfer Courses In An Engineering Technology Curricula, Otilia Popescu, Orlando Ayala

Engineering Technology Faculty Publications

Differential equations are at the core of any undergraduate engineering as well as of science programs. While a course in differential equations is required by any engineering degree, it is not a requirement for engineering technology programs, which usually require mathematics up to calculus I. This paper discusses the undergraduate engineering technology curricula, focusing on how differential equations are taught to engineering technology students and how they are covered in the programs. In particular, the paper will discuss the treatment of differential equations in electrical circuits and heat transfer courses.

Building Obsolescence: Key Factors Influencing Demolition Decisions For Commercial Buildings, Azlan Shah Ali, Zakaria Norhanim, Zulkifly Umi-Kalsum, Zaki Faiz

Research Publications (2021 to 2025)

Buildings, while primarily serving to provide shelter, can deteriorate over time without proper maintenance and planning, leading to obsolescence, a significant threat to their functionality. This study investigates the factors contributing to building obsolescence and how they influence the selection of adaption strategies, focusing on commercial buildings as a case study. Questionnaire data were gathered from 386 business owners and occupants of obsolete buildings in Klang Valley, Malaysia, to capture their perspectives on the issue. Principal Component Analysis (PCA) and Multiple Linear Regression (MLR) were employed to rank obsolescence factors and solution options on strategies on obsolescence factors. PCA results …

Improving Visual Inspection Performance During Pre-Flight Visual Inspections By Aircraft Maintenance Technicians., Patrick Codd

Doctoral

Visual inspection is a critical task in aircraft maintenance and is the predominant inspection technique used in the global aviation sector. For safety reasons, visual inspections by Aircraft Maintenance Technicians are routinely conducted on a daily basis during pre-flight inspections. Its significance becomes evident when considering the potential consequences of Aircraft Maintenance Technicians not seeing observable defects during visual inspections. For example, an aircraft crash landing in 1989 resulted in 111 fatalities and was attributed to a visual inspection failure. The industrial quality control literature also illustrates the varying accuracy for the observation of defects and hazards, underscoring the inherent …

Lara : A Light And Anti-Overfitting Retraining Approach For Unsupervised Time Series Anomaly Detection, Feiyi Chen, Zhen Qin, Mengchu Zhou, Yingying Zhang, Shuiguang Deng, Lunting Fan, Guansong Pang, Qingsong Wen

Research Collection School Of Computing and Information Systems

Most of current anomaly detection models assume that the normal pattern remains the same all the time. However, the normal patterns of web services can change dramatically and frequently over time. The model trained on old-distribution data becomes outdated and ineffective after such changes. Retraining the whole model whenever the pattern is changed is computationally expensive. Further, at the beginning of normal pattern changes, there is not enough observation data from the new distribution. Retraining a large neural network model with limited data is vulnerable to overfitting. Thus, we propose a Light Anti-overfitting Retraining Approach (LARA) based on deep variational …

Fuzzing Drones For Anomaly Detection: A Systematic Literature Review, Vikas Kumar Malviya, Wei Minn, Lwin Khin Shar, Lingxiao Jiang

Research Collection School Of Computing and Information Systems

Drones, also referred to as Unmanned Aerial Vehicles (UAVs), are becoming popular today due to their uses in different fields and recent technological advancements which provide easy control of UAVs via mobile apps. However, UAVs may contain vulnerabilities or software bugs that cause serious safety and security concerns. For example, the communication protocol used by the UAV may contain authentication and authorization vulnerabilities, which may be exploited by attackers to gain remote access over the UAV. Drones must therefore undergo extensive testing before being released or deployed to identify and fix any software bugs or security vulnerabilities. Fuzzing is one …

In Vitro Comparative Study Of Composite Coatings For Magnesium-Based Bone Implants, Abdelrahman Amin, Bryce Williams, Thomas Mcgehee, Alyssandra Navarro, Vipul Patil, Mostafa Elsaadany, Hanna Ibrahim

Biomedical Engineering Faculty Publications and Presentations

This study provides a comparative assessment of the corrosion, morphology, and biological properties of four of the most promising coating methods for magnesium in biomedical applications, namely micro-arc oxidation (MAO), graphene oxide (GO)-containing MAO coating, MAO/sol-gel composite coating, and MAO/polycaprolactone (PCL) polymer dip coating approaches. Despite the abundance of research focused on these promising coating approaches, there is a notable lack of comparative studies evaluating their properties. To this end, the investigated composite coatings are ZK60+MAO, ZK60+MAO/GO, ZK60+MAO/Sol-gel, and ZK60+MAO/PCL composite coating. Several tests were used to assess various properties of the prepared groups such as in vitro corrosion characteristics, …

Representation In Engineering-Focused Children's Literature: A Critical Content Analysis, Angela Eckhoff

Teaching & Learning Faculty Publications

Children’s picturebooks have long been understood as a powerful medium for exploring aspects of children’s lives, experiences, and identities serving as mirrors which allow children to see themselves reflected, as windows through which they can gain insight into the experiences of others, and as sliding glass doors when children are connected to the story and characters in meaningful ways. Utilizing a critical content analytic approach, this research examined the identity markers and engineering practices found in contemporary children’s picturebooks with an engineering focus. The analysis yielded key themes that highlight the ways children can interact and connect to the characters …

Teaching Engineering To Enhance Beginning Elementary Preservice Teachers' Engineering-Related Knowledge And Beliefs, Jennifer Kidd, Danielle Rhemer, Kristie Gutierrez, Stacie I. Ringleb, Krishnanand Kaipa, Orlando Ayala, Pilar Pazos, Francisco Cima, Isaac Kumi

Teaching & Learning Faculty Publications

Background

Teacher educators have begun exploring the most effective ways to prepare preservice teachers (PSTs) to engage elementary students in engineering design. However, this remains challenging as PSTs continue to report a lack of exposure to engineering during their K-12 school experiences. This study investigates the engineering-related knowledge and beliefs of PSTs in their first education course, collaborating in small teams to lead elementary students in engineering design challenges. We explored two different iterations to understand how the structure of the teaching experiences contributed to PST outcomes as a first step in identifying helpful approaches. In spring 2022, PSTs collaborated …

A Deep Dive In Preservice Teacher Self-Efficacy Development For Teaching Robotics (Rtp), Jennifer Jill Kidd, Kristie Gutierrez, Min Jung Lee, Danielle Marie Rhemer, Krishnanand Kaipa, Pilar Pazos, Stacie I. Ringleb, Orlando M. Ayala, Francisco Cima, Isaac Koduah Kumi

Teaching & Learning Faculty Publications

Nationwide K–6 engineering and coding standards have made it increasingly important to prepare elementary preservice teachers (PSTs) to teach these subjects confidently and effectively. Robotics, which combines coding and engineering, provides a rich context for developing PSTs’ expertise and self-efficacy. This study builds on prior work in which PSTs in an instructional technology course collaborated with undergraduate engineering students to co-teach robotics lessons to fifth graders. Using a multiple-embedded case study approach, we examine how the interactions and teaching roles within these partnerships influenced PSTs’ teaching self-efficacy. Drawing on reflections, lesson recordings, surveys, and interviews, we present the cases of …

Cultivating Plain Language Skills For Engineering Students, Catherine Wong, Cynthia Carlson

Faculty Publications

While engineers are learning the vocabulary of the profession, understandably, they want to practice, and perhaps show their professors that they are proficient. This leads to student writing that is overly complicated and full of jargon. This is not the type of document that would be clear to the public, or even to a professional outside of the narrowly focused field of the particular engineer. After graduation, engineers’ writing becomes exponentially more important. Often approval of projects relies on residents’ or clients’ understanding of engineers’ work. For example, an engineering firm completing an investigation of an important health concern such …

An Operational Field Study: A Comparison Of Piloting Uncrewed Underwater Vehicles And Uncrewed Aircraft Systems, David Thirtyacre, Joseph Cerreta, Pete Miller, Kimberly Luthi, Jolee Thirtyacre

Publications

and operations, the ability to cross-train personnel in both Uncrewed Underwater Vehicles and Small Uncrewed Aircraft System operations has become a focal point for efficiency and workforce optimization. This study presents a comparative analysis of the operational and human factor considerations involved in piloting mini UUV and sUASs, highlighting the key similarities and differences in control methods, environmental influences, navigation, emergency procedures, and situational awareness. A qualitative experimental field study was conducted between July 2024 and October 2024, involving real-world deployments of both systems in maritime and aerial environments. Findings indicated that while UUV and sUAS operators relied on remote …

Factors Contributing To Fatalities In Helicopter Emergency Medical Service Accidents, Jenna Korentsides, Joseph R. Keebler, Mihhail Berezovski, Alex Chaparro

Publications

INTRODUCTION: T his study aimed to update and reinforce previous research on helicopter emergency medical service accidents in the United States. By investigating predictors of fatalities after helicopter emergency medical service crashes through the application of machine learning techniques, we updated existing data sets and sought to uncover patterns that traditional analysis might not reveal.

METHODS: Using the National Transportation Safety Board database, the authors analyzed a dataset of 267 helicopter emergency medical service accidents between 1991–2022. We first calculated fatalities odds ratios for each condition. We then plotted geospatial locations of all reported accidents. Finally, we used XGBoost regression …

New Insights Into Fertilisation With Animal Manure For Annual Double-Cropping Systems In Nitrate-Vulnerable Zones Of Northeastern Spain, Dolores Quilez, Monica Guillen, Marta Valles, Arturo Dauden, Beatriz Moreno-Garcia

Biological and Agricultural Engineering Faculty Publications and Presentations

Maize double-cropping production systems in Mediterranean areas have a great nitrogen extraction capacity and high nitrogen (N) requirements. This study aims to assess whether in these farming systems, animal manure can be applied, using adequate management practices, at levels exceeding the maximum annual amount of livestock manure established in the European Nitrate Directive for vulnerable zones (170 kg N ha-1) without increasing the risk of water nitrate contamination. We compare the risk of nitrate leaching under two fertilisation strategies, one with synthetic fertilisers and the second with a maximised application of pig slurry, exceeding the limits of the EU Nitrate …

Board # 377: Improving Graduation Outcomes In Stem: Preliminary Results From The Rise Scholars S-Stem Program, William John Palm

Engineering, Computing & Construction Management Faculty Publications

The S-STEM funded RISE Scholars Program examines the effects of engaging undergraduate students in a structured practice of science communication on their academic performance, persistence, and graduation in a STEM field. The program includes a weeklong summer bridge experience intended to develop incoming students’ curiosity, introduce science communication, and build community within the cohort; two STEM communication courses (on public speaking and science writing); and a variety of co-curricular activities with STEM and communication themes. This paper presents preliminary results on 4-year graduation outcomes. Data on academic performance and progress, as well as incoming student characteristics, were obtained from university …

Numerical Simulation And Group Homework In A Second-Year Dynamics Course, Matthew Stein

Engineering, Computing & Construction Management Faculty Publications

Roger Williams University engineering faculty believe that properly preparing students to use modern engineering tools is best accomplished through integration into coursework throughout the four-year curriculum. But this is challenging in practice, as engineering courses are already packed with essential technical content and any encumbrance to delivering this material is unwelcome. The author’s engineering mechanics course (Dynamics) is an effort to satisfy the conflicting goals of building technical skills while delivering complex content. This paper describes a multi-year effort to integrate solid modeling into the course by requiring numerical validation of symbolic solutions to homework problems. Working in homework groups, …

Personnel & Team Management, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

Agenda

• Team Design
• What is a PM?
• Role "Definition
• Training
• Communication
• Expectation management
• Performance management & feedback
• Tools
• Meetings & tasking
• Gantt charts
• Dashboard
• Risk management

Kinetic Takedown Methods For Unmanned Aerial Systems (Uas), Boston John

Space Dynamics Laboratory Publications

Drone Swarms

• Difficult to detect

• Can overwhelm defense systems

• Low cost makes them ideal for tactical warfare

Longitudinal Examination Of Gender Differences In Engineering Self-Efficacy And The Impact Of Covid-19: A Six-Year Study, Lillian C. Jeznach, Maija A. Benitz

Engineering, Computing & Construction Management Faculty Publications

This paper presents a longitudinal analysis of gender differences in undergraduate engineering students’ feeling of self-efficacy across a six-year period, including the impact of the COVID-19 pandemic. Engineering self-efficacy was measured by the Longitudinal Assessment of Engineering Self-Efficacy (LAESE) instrument, while pandemic-related stress was measured with a COVID screener comprised of twenty Likert-type questions. Surveys were administered to engineering students at a small, primarily undergraduate university every semester from Fall 2018 through Spring 2024 and also included one summer survey following a move to online teaching in 2020. Results of long-term data collected over six years (thirteen timepoints) indicated no …

Atomistic Study Of Selenium Doping Effects On The Mechanical Properties Of Zinc-Blende And Wurtzite Cdte Nanowires, Sungwook Leo Hong, Nadeem Azad, Saifuddin Zafar, Abrar Faiyad, Hyung Sub Sim

Mechanical Engineering Faculty Works

CdSexTe1–x semiconductor materials, having potential to be used to design dependable and reproducible nanowire devices, require an extensive study of their mechanical behaviors. The uniaxial tensile deformation mechanism of CdSexTe1–x nanowires (NWs) with different Se dopant concentration are yet to be explored. By integrating theoretical analysis with computational simulation, this research demonstrated that Se doping in CdTe NWs influences the mechanical response and failure modes. Ultimate tensile strength (UTS) and elastic modulus (EM) were studied for both zinc-blende (ZB) and wurtzite (WZ) structures with different crystal orientations. The findings revealed that these mechanical properties increase linearly with increasing Se concentration …

The Role Of Artificial Intelligence In Boosting Cybersecurity And Trusted Embedded Systems Performance: A Systematic Review On Current And Future Trends, Xiangyi Cheng, Ahmed Oun, Kaden Wince

Mechanical Engineering Faculty Works

As technology becomes increasingly interconnected, ensuring the security of cyber and embedded systems is critical due to escalating vulnerabilities and sophisticated cyber threats. Researchers are exploring artificial intelligence (AI) to improve security mechanisms, yet there is a lack of a comprehensive technical, AI-focused analysis detailing the integration of AI into existing security hardware and frameworks. To address this gap, this article systematically reviews 63 articles on AI in cybersecurity and trusted embedded systems. The reviewed articles are categorized into four application domains: 1) Intrusion Detection and Prevention (IDPS), 2) Malware Detection, 3) Industrial Control and Cyber-Physical Systems (CPS) and 4) …