Engineering Commons^™

Optimizing Acid Mist Suppression: Unraveling Surfactant Effects On Bubble Formation And Bursting Dynamics In Copper Electrowinning, Ashish Kakoria, Mirza Muhammad Zaid, Aamir Iqbal, Ellen Amoako Afful, Guang Xu

Mining Engineering Faculty Research & Creative Works

The working mechanism of surfactant to reduce acid mist in copper electrowinning system is not well understood. Most of the studies are based on the surface tension reduction phenomenon but this is not the only function that causes acid mist reduction. In this paper, we investigated the effect of different surfactants on a bubble's residence time, terminal velocity, flow regime, and bursting dynamics using a high-speed camera. We have evaluated five different surfactants and found that the presence of surfactants reduces the terminal velocity, bubble diameter, and increases the residence time of the bubble in electrolyte. Especially for FC-1100, the …

Arc-Jet And Free-Flight Evaluation Of Laminar And Turbulent Diffusion Models On Ablation, Kyle Worden, Andrew Heider, Serhat Hosder

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper investigates the effect of diffusion models on carbon ablation with a parametric study on a slug-calorimeter geometry in arc-jet flow at two enthalpy conditions using two arc-jet flow modeling approaches, and at corresponding enthalpy-matched free-flight conditions using RANS CFD simulations. Additionally, a sphere-cone geometry is modeled at the arc-jet enthalpy matched free-flight conditions and at a high Reynolds number free-flight condition. The approximate-corrected form of Fick's law and the Stefan-Maxwell diffusion models are investigated for equilibrium and finite-rate carbon ablation in laminar and turbulent flows, which is simulated with the Menter-SST turbulence model. The turbulent cases include the …

An Adaptive Sampling Strategy On Optimal Takeoff Trajectory Prediction Of Electric Drones, Dheeraj Paramkusham, Samuel Sisk, Jiachen Wang, Shuan Tai Yeh, Xiaosong Du, Nathan Roberts

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric vertical takeoff and landing (eVTOL) aircraft transforms future transportation systems by alleviating transportation congestion on the ground. This eVTOL technique possesses unique features, including reduced noise, low pollutant emissions, efficient operating costs, and flexible maneuverability. Meanwhile, battery consumption poses critical challenges to flight task duration. Thus, optimal takeoff trajectory design is essential due to immense power demands during eVTOL takeoffs. Conventional design optimization, however, iteratively evaluates high fidelity simulation models, making the design process computationally intensive. In this work, we implement a machine learning-enabled inverse mapping optimization concept, i .e., directly predicting optimal design based on design requirements (including …

Study On Field Emission Characteristics Of Carbon Nanotube Arrays Patterned Via Laser Welding Of Dissimilar Materials, Hung Yin Tsai, Yi Hung Chen, Kuan Ching Wang, Paul W. Leu, Ming C. Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper describes a new method of growing carbon nanotube (CNT) arrays using laser welding of a catalyst metal onto the surface of a quartz substrate, followed by CNT growth through the chemical vapor deposition (CVD) process. A major advantage of this method is its ability to pattern the catalyst before growing the CNTs, thus allowing for the formation of CNTs at specific locations. The laser pre-treatment method minimized structural damage to CNTs in comparison to the laser post-processing method, achieving a lower ID/IG value of 0.72 in Raman spectroscopy analysis. Using hexagonally patterned CNT arrays on quartz, we achieve …

Correction: Advancing Cislunar Space Domain Awareness Through Robust Optimization Framework For Optical Sensors-Based Autonomous Satellite Systems (American Institute Of Aeronautics And Astronautics Inc, Aiaa), Smriti Nandan Paul, Siwei Fan, Igor Panfil

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Correction Notice • Page 8: "$\lambda_2$: It represents the cardinality-weighted" corrected to "$\lambda_2$: It represents the inverse of cardinality-weighted." Equation $\lambda_2=\sum_{i=1}^{10}(n_i\Xi_i)$ corrected to $\lambda_2=1/(\sum_{i=1}^{10}(n_i \Xi_i))$ • Page 11: Table 1 is updated with new orbital families and number of satellites & 1 & $L_2$ Halo south|$L_1$ Halo north|Butterfly south & 1|2|3\\ & 2 & $L_1$ Halo north|$L_2$ Halo south|Dragonfly south & 5|10|3\\ & 3 & Butterfly south|$L_2$ Halo south|$L_2$ Lyapunov & 3|10|4\\ & 4 & $L_1$ Halo south|$L_2$ Halo north|$L_1$ Halo north & 5|3|1\\ A|B|C & 5 & $L_2$ Halo south|$L_1$ Lyapunov|$L_2$ Halo north & 2|8|9\\ & 6 & $L_3$ …

High-Order Dynamic Mode Decomposition For Multidimensional Harmonic Retrieval, Yanming Zhang, Steven Gao, Lijun Jiang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Estimating channel parameters such as azimuth, elevation, Doppler shift, and delay is a key challenge in wireless communication, often formulated as a multidimensional harmonic retrieval (MHR) problem. To address this, we propose a high-order dynamic mode decomposition (HODMD) framework for robust frequency estimation from high-dimensional signals in noisy environments. The HODMD approach combines high-order singular value decomposition (HOSVD) to decompose tensor data into a core tensor and mode matrices, with dynamic mode decomposition (DMD) to extract frequencies from the imaginary parts of the DMD eigenvalues. Simulation examples validate the effectiveness of the proposed method, demonstrating its efficiency in solving MHR …

Performance Evaluation And Multiphysics Process Modeling Of Carbon Fiber Reinforced Thermoset Composites Using Microwave And Autoclave, Nayan Pundhir, Patrick Schwartzkopf, K. Chandrashekhara, Logan Wilcox, Kristen M. Donnell, Jim Lua, Rui Li

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this study, IM7/Cycom 5320-1 unidirectional prepreg has been utilized to manufacture 16-layer laminated composites: a symmetric cross-ply ([0°/90°]4s) and a quasi-isotropic ([45°/90°/−45°/0°]2s) configuration. Microwave and autoclave curing processes have been employed to manufacture the laminated composites. The manufactured composite cure was assessed using differential scanning calorimetry (DSC). The quality and porosity of the microwave-cured parts were juxtaposed to those of autoclave-cured parts through optical microscopy and micro-computed tomography (micro-CT) scanning. Mechanical characterization of the microwave-cured panels was conducted using uniaxial tensile and flexural tests, with results juxtaposed to autoclave-cured samples. Experimental characterization revealed that the microwave-cured parts exhibited nearly …

Design And Testing Of An Intrusive Arm For Supersonic Flow Sampling, Caleb Roberts, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Intrusive probes are critical tools in supersonic wind tunnel testing, enabling direct measurement of flow properties such as pressure and heat flux. To support these measurements, a single-axis intrusive arm was designed and implemented in the Missouri S&T Supersonic Wind Tunnel. The system is designed to maintains precise probe positioning, while withstanding the aerodynamic loads, and preserving a dynamic seal between the test section and ambient environment. Its modular design accommodates a range of probe types for various research applications. This paper presents the design methodology, including structural, mechanical, and aerodynamic considerations, and details the integration process. System performance was …

Industry 5.0, Human–Machine Interface, And Smart Manufacturing In Additive Manufacturing—A Recent Trend, Atiqur Rahman, Md Hazrat Ali, Muhammad Arif Mahmood, Frank Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The emergence and importance of Industry 5.0 are transforming production by integrating smart technology with human creativity and intelligence, especially in advanced additive manufacturing. This critical review precisely analyzes the function of human–machine interfaces (HMIs) in enhancing additive processes, emphasizing their incorporation into smart manufacturing systems and hybrid manufacturing methods, including material extrusion (MEX), laser powder bed fusion (LPBF), and directed energy deposition (DED). It also evaluates artificial intelligence (AI), the Internet of Things (IoT), and cybersecurity, which enhance HMIs in process monitoring, operation, and system adaptability. This study aims to provide a critical analysis and future research direction on …

Optimizing Uav Swarm Deployment For Efficient Communication Signal Strength Alignment In Disaster Scenarios, Mina Khalilzadeh Fathi, Chaoying Pei

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In disaster scenarios, establishing reliable communication infrastructure is critical, and unmanned aerial vehicle (UAV) swarms offer a promising solution as temporary base stations. This study models communication demand in disaster-affected areas by applying Gaussian kernels to building data, forming a spatial demand distribution. Signal strength is estimated using the normalized inverse Free Space Path Loss (FSPL) to account for realistic attenuation. To guide UAV placement, we extract high-demand regions from the demand distribution using a gradient-based thresholding method. Based on this information, we develop a greedy algorithm to iteratively position UAVs for optimal coverage in areas with the greatest communication …

Few-Shot Learning-Enhanced Tiered Path Planning For Mars Rover Navigation, Ziyi Wang, Di Yu, Mina Khalilzadeh Fathi, Chaoying Pei

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Path planning for Mars rovers presents significant challenges due to the diverse terrain, ranging from easily navigable areas to hazardous zones. Traditional methods typically classify terrain simply as passable or impassable, failing to account for the nuances of more moderately challenging areas. In this paper, we introduce a tiered terrain-aware path planning strategy, employing few-shot learning to classify and segment Martian terrain into levels of difficulty. The few-shot learning model, trained on Earth, is sent to the rover, enabling real-time processing of images from satellites or helicopters. The flexibility of few-shot learning, which requires minimal data and training time, enables …

Identifying Potential Risk Areas Close To The Oil And Gas Pipelines Due To Subsidence In Qazvin Plain, Mahmoud Rajabi, Sanaz Vajedian, Ryan Smith, Neil Grigg, Hossein Nahavandchi, Mehdi Goli

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Surface displacement caused by natural and anthropogenic activities poses a significant risk to subsurface pipelines, particularly in areas experiencing subsidence. Stress and strain induced by deformation can lead to pipeline buckling and potential vulnerability. This study applies a multidisciplinary approach integrating interferometric synthetic aperture radar (InSAR) deformation analysis, well data, and geological context to assess the risk to oil and gas pipelines in Iran's Qazvin plain. The focus is on evaluating the impact of an unconfined aquifer, which has a lower risk of subsidence compared to a confined aquifer, on pipeline infrastructure. We analyzed multitemporal Sentinel-1 data collected between 2014 …

Drone Medical Package Delivery For Improved Transportation And Better Patient Outcomes Final Implementation Report, Amro El-Adle, Madeline Alden, Yin-Hsuen Chen, Melissa Davidson

Information Technology & Decision Sciences Faculty Publications

The Drone Medical Package Delivery for Improved Transportation and Better Patient Outcomes planning and prototyping grant involves five partners, including Accomack-Northampton Planning District Commission (A-NPDC), Riverside Health System, Old Dominion University (ODU), Virginia Institute for Spaceflight & Autonomy (VISA), Virginia Innovation Partnership Corporation (VIPC), and DroneUp. The partners worked together to address access, safety, reliability and sustainability for medical and emergency response package delivery via drone, specifically, where the use of aerial drones could lead to better patient outcomes and improved safety and emergency response.

The goal of the project was to develop an operational prototype that woul evolve into …

The Effect Of Liquid Conductivity On A Helium Plasma Jet And The Hydrogen Peroxide Production, Edwin A. Oshin, M. Ziaur Rahman, Chunqi Jiang

Bioelectrics Publications

Understanding plasma-liquid interactions and the impact of the electrical conductivity (σ) of liquid on plasma is important for plasma applications in water treatment and medicine. Ultrapure water, phosphate-buffered saline (PBS) solution, biological media, and sodium chloride (NaCl) solutions at various concentrations were used in this study to provide a broad range of conductivity values ranging from 0.055 μS cm⁻¹ to 222 mS cm⁻¹. A helium atmospheric pressure plasma jet (APPJ) impinging on liquid was generated in ambient air using a hollow-needle electrode that was powered by 200 ns, 7 kV pulses at a pulse repetition frequency of …

Determining The Transient Electric Field And The Effect Of Pulse Repetition Frequency On The Field In A Repetitive 10-Ns Pulsed Discharge In A Quiescent Ch₄-Air Mixture, Chunqi Jiang

Bioelectrics Publications

The goal of this research is to understand the underlying physics enabled by nanosecond pulsed power in a discharge initiation and the following physicochemical processes that favor lean-fuel plasma ignition for combustion. The hypothesis of this project is that pulsed power waveforms such as the pulse repetition frequency (PRF), voltage amplitude, and dielectric surface alter the reduced electric field during the initiation of the discharge, resulting in different plasma properties, which will vary the physicochemical processes for efficient and selective radical productions. This is especially important for lean-burn combustion and reducing emission.

Adaptation And Validation Of The Small Strain Hardening Soil Model For Sensitive Clays In Eastern Canada, Jose Fidelis Zanavelo, Denis Leboeuf, Bertrand Galy

Articles dans des actes de congrès

This study focuses on the modelling of the complex behaviour of Champlain Sea deposits of Éastern Canada. Sensitive clays present unique geotechnical challenges due to their significant strength loss upon remolding and complex stress-strain response. The research was conducted in two phases: (1) a laboratory investigation of Louiseville clay under various stress paths and (2) the development and validation of a modified constitutive model based on the Hardening Soil model with small-strain stiffness (HSsmall). Standard HSsmall showed limitations in representing the behaviour of structured sensitive clays, especially in the overconsolidated range. To address this, the HSSstruct model, which improves upon …

Human Perception Of Ai Capabilities At Classifying Perturbed Roadway Signs, Katherine R. Garcia, Jing Chen, Yanru Xiao, Scott Mishler, Cong Wang, Bin Hu

Psychology Faculty Publications

Artificial Intelligence (AI) is crucial to numerous functions required for driving automation systems, including the computer vision techniques used to detect the roadway environment and make real-time decisions. However, the images used as inputs to the AI system may be maliciously perturbed, or manipulated, causing the AI system to make an incorrect classification. In this study, we examined humans’ perception of the AI’s computer vision capability of classifying various road sign images, including the original images, images with two different types of malicious attacks, and images that are scrambled randomly at the pixel level. Our results showed that participants rated …

Food Waste Crisis In The United States Of America: The Known, The Overlooked And The Undisclosed, Sagarika Srivastava, David J. Tonjes

Technology & Society Faculty Publications

With a loss of 1,250 calories per day per person or 140 kg/p/yr, the United States (U.S.) has a large problem with food waste. The later a product is wasted in the supply chain, the greater its environmental cost. Many food waste mitigation efforts focus on the retail and consumer stages, but there is also considerable food waste in the production phase, which includes growing, harvesting, transportation, storage and processing. The study is conducted in two steps: a bibliometric analysis of 218 articles on food waste in the U.S., followed by an investigation of options to meet food waste recovery …

Shifting Students’ Perceptions About Homelessness: Quantitative Assessment Of A Project-Based Approach, Diana A. Chen, Mark A. Chapman, Joel Alejandro Mejia

School of Engineering: Faculty Scholarship

Although engineering institutional bodies uphold public welfare and the impact of engineering on people and society, engineering curricula rarely scaffold students to connect their technical learning with sociotechnical perspectives. This paper describes a project-based learning approach where engineering students engaged with issues faced by people experiencing homelessness to better understand the sociotechnical nature of effective, user-centered, engineering design. We conducted a quantitative assessment to de- termine how well and in what ways the project-based learning curriculum shifted students’ perceptions about homelessness. We collected pre-/post-survey data from students on 21 statements about their perceptions and attitudes about homelessness prior to and …

Bio-Inspired Sutures: Localizing Damage By Isolating Strain Energy, Diana A. Chen, Melissa M. Gibbons

School of Engineering: Faculty Scholarship

This study draws upon bio-inspiration from anatomical sutures found in hard structures, such as turtle shells, to explore if impact energy can be dissipated through geometric parameterization rather than relying on energy-absorbing materials. While previous finite element analysis studies identified optimal dovetail suture geometries for maximizing the global stiffness and toughness of archway structures, this paper explores how different suture geometries might optimize localization effects through segmentation to isolate damage caused by the propagation of strain energy. We compare the global toughness of each suture geometry to its scaling factor, defined as the ratio of strain energy in the center …

Molecular Dynamics-Based Two-Dimensional Simulation Of Powder Bed Additive Manufacturing Process For Unimodal And Bimodal Systems, Yeasir Mohammad Akib, Ehsan Marzbanrad, Farid Ahmed

Manufacturing & Industrial Engineering Faculty Publications

The trend of adapting powder bed fusion (PBF) for product manufacturing continues to grow as this process is highly capable of producing functional 3D components with micro-scale precision. The powder bed’s properties (e.g., powder packing, material properties, flowability, etc.) and thermal energy deposition heavily influence the build quality in the PBF process. The packing density in the powder bed dictates the bulk powder behavior and in-process performance and, therefore, significantly impacts the mechanical and physical properties of the printed components. Numerical modeling of the powder bed process helps to understand the powder spreading process and predict experimental outcomes. A two-dimensional …

Mastering Enterprise Networks (2nd Ed), Mathew J. Heath Van Horn

OER Main

Mastering Enterprise Networks, is a comprehensive guide to building, defending, and attacking enterprise networks. It covers a wide range of topics, from network fundamentals to advanced security concepts. The book is well-organized and easy to follow, making it a valuable resource for both beginners and experienced network professionals.

One of the strengths of this book is its focus on hands-on learning. The book includes 50 chapters of labs that allow readers to practice the concepts they have learned. These labs are a great way to reinforce your understanding of enterprise networks while developing practical skills.

This book covers security from …

Dynamic Stability Test Technique For Blunt Bodies In A Magnetic Suspension And Balance System, Caleb Hull, Colin Britcher, Dave E. Cox, Mark Schoenenberger, Hisham M. Shehata

Mechanical & Aerospace Engineering Faculty Publications

Techniques for the measurement of subsonic dynamic stability derivatives of blunt-body re-entry capsules are being developed using a Magnetic Suspension and Balance System at NASA Langley Research Center. The measured aerodynamics of a 45-degree sphere-cone similar to configurations being considered for Mars Sample Return Earth Entry Vehicle are reported. A novel test method has been developed where forced oscillatory translation of a test article is used to excite yaw attitude oscillations. The forced motion is then halted to observe free-to-oscillate behavior of the test article. Parameter identification methods are used to extract static and dynamic yawing moment stability characteristics from …

Fault Tree Analysis For Robust Design, Jonathan Degroff, Gene Jean-Win Hou

Mechanical & Aerospace Engineering Faculty Publications

The objective of this research is to incorporate system failure into a robust design formation and solution process. The system failure referred to here will be built using fault tree analysis (FTA), which will take all lower-level failure events into consideration. Two examples are investigated here. One will directly treat the probabilities of the basis events as design variables, The other will be formulated in five different models: deterministic design optimization, the reliability index-based, the “and” gate-based, the “or” gate-based and the “inhibit” gate-based robust design. Their corresponding optimization solutions will be compared with each other. The post-optimality analysis of …

Polarized Positrons At Ce⁺Baf, A. Ushakov, J. Benesch, M. Bruker, L. Cardman, J. Conway, S. Covrig Dusa, P. Degtiarenko, Y. Enomoto, S. Gessner, P. Ghoshal, S. Gopinath, J. Grames, C. Gulliford, S. Habet, G. Hays, C. Hernández-García, A. Hofler, R. Kazimi, M. Kostin, V. O. Kostroun, F. Lin, V. Lizárraga-Rubio, K. Mahler, Y. Morikawa, S. Nagaitsev, S. Ogur, G. Palacios-Serrano, N. Raut, B. Rimmer, Y. Roblin, A. Seryi, K. Smolenski, M. Stutzman, R. Suleiman, A. Sy, N. Taylor, D. Turner, A. Ushakov, C. Valerio-Lizarraga, E. Voutier, S. Wang, Y. Zhang

Mechanical & Aerospace Engineering Faculty Publications

A baseline concept for a continuous wave (CW) polarized positron injector was developed for the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab [1]. This concept is based on positron beam generation by a high current polarized electron beam (1 mA, 120 MeV, >85% polarization) irradiating a rotating water-cooled tungsten target or liquid metal target. The update on the development of the Ce⁺BAF injector concept including the polarized electron source, the development of high power targets, simulations of positron capture, the design of the transport line from the positron injector to the CEBAF North Linac and the planned experiment …

Revealing Spatiotemporal Neural Activation Patterns In Electrocorticography Recordings Of Human Speech Production By Mutual Information, Julio Kovacs, Dean Krusienski, Minu Maninder, Willy Wriggers

Mechanical & Aerospace Engineering Faculty Publications

Background

Spatiotemporal mapping of neural activity during continuous speech production has been traditionally approached using correlation coefficient (CC) analysis between cortical signals and speech recordings. A prior study employed this approach using electrocorticography (ECoG) data from participants who underwent invasive intracranial monitoring for epilepsy. However, CC cannot detect nonlinear relationships and is dominated by the correspondence between periods of silence and of non-silence.

New Method

We introduce the mutual information (MI) measure, which can capture both linear and nonlinear dependencies. We validated CC and MI on the sub-second spatiotemporal brain activity recorded during continuous speech tasks. To refine the results, …

Traction Force Microscopy Using An Epifluorescence Microscope: Experimental Considerations And Caveats, Zaria Booth, Mazen Mezher, Rudra Patel, Venkat Maruthamuthu

Mechanical & Aerospace Engineering Faculty Publications

Forces exerted by cells due to their internal contractility play fundamental roles in a host of processes, including adhesion, migration, survival and differentiation. Traction force microscopy (TFM) enables the determination of forces exerted by cells or cell collectives on their environment, which is typically taken to be an extra-cellular matrix (ECM)-coated substrate. Sample preparation for TFM involves the plating of cells onto an environment embedded with fiducial markers. The imaging of these fiducial markers in the presence and absence of the cells then enables calculation of the displacement of localized regions of the environment, and, consequently, the spatial distribution of …

Scaffolds With Spatiotemporally Controlled Growth Factor Delivery And Cyclodextrin-Enabled Antagonism Of Growth Factor Receptor Sequestration Promote Cutaneous Wound Healing, Jelena Marjanovic, Veronica Jurczuk, Lilian Valadares Tose, Yarixa Cintron Diaz, Francisco Fernandez Lima, Beatriz Abdo Abujamra, Sara Danker, Sinan Jabori, Devinder Singh, Jamie L. Burgess, Joshua Tam, Mohamadmahdi Samandari, Rivka C. Stone, Stephen C. Davis, Robert S. Kirsner, Marjana Tomic-Canic, Fotis M. Andreopoulos, Ivan Jozic

Mechanical & Aerospace Engineering Faculty Publications

Chronic wounds present a major burden to patients, health care professionals, and health care systems worldwide, yet treatment options remain limited and often ineffective. Although initially promising, growth factor-based therapies displayed limited and underwhelming effectiveness largely due to poor bioavailabilbioity and impaired receptor function within the chronic wound microenvironment. Here we demonstrate that chronic wounds exhibit elevated cholesterol synthesis, which disrupts growth factor signaling by sequestering receptors within lipid rafts. To address this, we developed a novel therapy combining growth factors with cyclodextrin in an ECM-mimetic scaffold, enabling localized cholesterol modulation and improved receptor accessibility. We demonstrate that this approach …

Mass-Adaptive Admittance Control For Robotic Manipulators, Hossein Gholampour, Jonathon E. Slightam, Logan E. Beaver

Mechanical & Aerospace Engineering Faculty Publications

Handling objects with unknown or changing masses is a common challenge in robotics, often leading to errors or instability if the control system cannot adapt in realtime. In this paper, we present a novel approach that enables a six-degrees-of-freedom robotic manipulator to reliably follow waypoints while automatically estimating and compensating for unknown payload weight. Our method integrates an admittance control framework with a mass estimator, allowing the robot to dynamically update an excitation force to compensate for the payload mass. This strategy mitigates end-effector sagging and preserves stability when handling objects of unknown weights. We experimentally validated our approach in …

Optimal Manipulation Motion Action Planner Enabled By Physics Informed Neural Networks, Jonathon E. Slightam, Logan E. Beaver

Mechanical & Aerospace Engineering Faculty Publications

Autonomous robotic manipulation in unstructured environments faces many challenges and is hindered by capabilities that bridge the gap between perception and acting on the world. Action plans that are centric to object motion rather than end-of-arm tooling behavior may aid this. This paper presents an autonomous action planner for a feedback linearizeable system comprised of three base motions that can be leveraged on their own or in combination to give custom motion plans. The optimization routine for the three different types of motion are presented, which are integrated into physics informed neural networks. A component of this is the autonomy …