Engineering Commons^™

The Interplay Between Endothelial Glycocalyx Maturity And Both The Toxicity And Intracellular Uptake Of Charged Nanoparticles, Claire A. Bridges, Lu D. Fu, Jonathan A. Yeow, Xiaojing D. Huang, Miriam D. Jackson, Rhiannon P. Kuchel, James D. Sterling, Shenda M. Baker, Megan S. Lord

Business and Information Technology Faculty Research & Creative Works

Nanoparticles are widely studied for delivering treatments to target tissues, but few have reached clinical use. Most nanoparticles encounter blood vessels on their way to target tissues. The inner surface of these vessels is lined with endothelial cells covered by a glycocalyx, an extracellular matrix rich in anionic glycans. The role of the glycocalyx in nanoparticle interactions is not well understood. Here, we demonstrate that endothelial cells need extended culture times to synthesize a mature glycocalyx. Our research shows that branched polyethyleneimine functionalized gold nanoparticles bind to endothelial cells expressing either a developing or mature glycocalyx, with the interaction involving …

Damage Behavior In Unidirectional Cfrp Laminates With Ply Discontinuity, M.J. Mohammad Fikry, K. T. Tan, Yutaro Arai, Ryo Inoue

University Research

This study presents a comprehensive quantitative investigation into the material properties and damage behavior of unidirectional carbon fiber reinforced plastic laminates with ply discontinuities. Laminates with varying resin gap lengths were evaluated. In situ edge observations and X-ray computed tomography were employed to assess the damage processes in the area of the ply discontinuity. These methods examined initially occurring cracks, secondary cracks, and delamination. Some unexpected cracking behavior was observed in this study. For instance, initial cracks were observed to form not at the interface but at a distance from the resin–ply interface, likely due to a constraint condition caused …

Realizing Intrinsically Ultralow And Glass-Like Thermal Transport Via Chemical Bonding Engineering, Zhonghao Xia, Xingchen Shen, Jun Zhou, Yuling Huang, Yali Yang, Jiangang He, Yi Xia

Mechanical and Materials Engineering Faculty Publications and Presentations

Crystals exhibiting glass-like and low lattice thermal conductivity ( ) are not only scientifically intriguing but also practically valuable in various applications, including thermal barrier coatings, thermoelectric energy conversion, and thermal management. However, such unusual are typically observed only in compounds containing heavy elements, with large unit cells, or at high temperatures. In this study, chemical bonding principles are utilized to weaken the Ag–Ag bonds and enhance lattice anharmonicity. The incorporation of a chalcogen anion as a bridge ligand is proposed to facilitate phonon rattling in Ag6-octahedron-based compounds. Guided by this design strategy, five Ag6 octahedron-based compounds, AAg3X2 (A = …

Enhancing Mucus Flow And Clearance By Grafting Zwitterionic Hydrogel Films To Luminal Surfaces, Ryan Horne, Caleb Escudero, Morgan Ellerman, C. Allan Guymon, Marlan Hansen

Faculty Publications

Objective

To determine the effects of zwitterionic hydrogel films on mucus contact angles, flow, and stasis with respect to medical polymer surfaces, both flat and tubular.

Methods

A zwitterionic hydrogel thin film was photografted onto medical rubber surfaces and compared against non-zwitterionic hydrogel thin films and untreated surfaces to determine its impact on mucus contact angles, mucus flow on sheets and tubes, and mucus plugging.

Results

Zwitterionic and conventional hydrogel films significantly reduce the mucus contact angles and the tilt required to initiate mucus flow on sheets and in tubular systems. Preliminary experiments show that these films may also shorten …

Conversational Voice User Interfaces Supporting Individuals With Down Syndrome: A Literature Review, Franceli L. Cibrian, Concepción Valdez, Lauren Min, Vivian Genaro Motti

Engineering Faculty Articles and Research

Conversational Voice User Interfaces (CVUIs) are widely used in commercial applications such as personal assistants. CVUIs are beneficial for most users as they enable interaction through speech and natural language. However, recent studies indicate that underrepresented user groups, such as individuals with speech impairments and specifically those with Down syndrome, face challenges in using voice commands to control CVUIs. The anatomical and physiological differences affecting the voice, speech, fluency, and prosody of users with Down syndrome hinder their experience with CVUIs. This article presents the results of 43 papers related to the use of voice user interfaces supporting individuals with …

Evidence Of Pure Ammonia Clouds In Jupiter's Northern Temperate Domain From Juno/Jiram Infrared Spectral Data, F. Biagiotti, D. Grassi, G. Liuzzi, G. Villanueva, G. Piccioni, T. Guillot, Shawn Brueshaber, Et. Al.

Michigan Tech Publications

In this work, we analyse data from the Jovian Infrared Auroral Mapper (JIRAM) imaging spectrometer on board the NASA mission Juno, to investigate the presence of spectrally identifiable ammonia clouds (SIACs). Focusing on the data from the first perijove passage, we found that a white vortex structure near 40°N provides the best candidate. Implementing atmospheric retrieval thanks to the planetary spectrum generator, we fit the JIRAM spectra (in the 2.5-3.1 μm range) inside and outside the vortex, varying the gaseous ammonia profiles, and the clouds and hazes properties and composition. We found that outside the vortex, the best fit …

Coastal Environments: Lidar Mapping Of Copper Tailings Impacts, Particle Retention Of Copper, Leaching, And Toxicity, W. Charles Kerfoot, Gary Swain, Robert Regis, Varsha K. Raman, Colin N. Brooks, Chris Cook, Et. Al.

Michigan Tech Publications

Tailings generated by mining account for the largest world-wide waste from industrial activities. As an element, copper is relatively uncommon, with low concentrations in sediments and waters, yet is very elevated around mining operations. On the Keweenaw Peninsula of Michigan, USA, jutting out into Lake Superior, 140 mines extracted native copper from the Portage Lake Volcanic Series, part of an intercontinental rift system. Between 1901 and 1932, two mills at Gay (Mohawk, Wolverine) sluiced 22.7 million metric tonnes (MMT) of copper-rich tailings (stamp sands) into Grand (Big) Traverse Bay. About 10 MMT formed a beach that has migrated 7 km …

Friction-Based Recycling: An Evaluation Of Friction Extrusion For Fabricating Ti-6al-4 V Wire Fabricated From Machining Chip Feedstock, Devesh Kumar Chouhan, Mageshwari Komarasamy, Scott B. Taysom, Nicole R. Overman, Nathan L. Canfield, Timothy J. Roosendaal, Anthony P. Reynolds, Scott A. Whalen

Faculty Publications

Titanium and its alloys are used in aviation and automobile industries due to their remarkable strength to weight ratio, but machining loss commonly is high with ~ 80 wt% of the material being converted to scrap. Recycling post-consumer Ti scrap directly into solid bulk products is a potential solution for repurposing valuable material. Further, eliminating fresh Ti sponge during recycling might lead to lower energy and greenhouse gas emissions. In this study, a solid-phase process known as friction extrusion was utilized to recycle Ti-6Al-4 V machining chips into solid wires which could be used as feedstock in additive manufacturing. The …

Experiment-Based Superposition Thermal Modeling Of Laser Powder Bed Fusion, Cody S. Lough, Tao Liu, Robert G. Landers, Douglas A. Bristow, James A. Drallmeier, Ben Brown, Edward C. Kinzel

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Parts experience significant local thermal variations during the Laser Powder Bed Fusion (LPBF) metal Additive Manufacturing (AM) process, providing a potential source of defects. Near real-time thermal predictions can enable better process planning and facilitate corrections on subsequent layers to enable the engineering of laser parameter and scan path combinations that avoid defect inducing scenarios. This paper considers an experiment-based Discrete Green's Function (DGF) thermal model for temperature field prediction in LPBF. An analytical framework is developed and used to calculate an experimental DGF (i.e., powder bed's single pulse temperature response) from spatiotemporal Short-Wave Infrared (SWIR) camera data. The extracted …

Error-Based Dynamic Velocity Range Of Piv Processing Algorithms, Gauresh Raj Jassal, Bryan E. Schmidt

Faculty Scholarship

The ability of PIV processing algorithms to accurately determine velocity vectors across the range of motion present in PIV images is characterized by the algorithm’s dynamic velocity range (DVR). Conventionally, the DVR of PIV is defined using the ratio between the maximum and minimum resolvable particle displacements, with the minimum based on the uncertainty in the location of a single particle in the optical system. In this work, it is demonstrated that this definition is inadequate in practice, as it ignores many factors which affect the accuracy of an algorithm when determining small displacements, and the error in vectors with …

Uncertainty Propagation And Sensitivity Analysis For Constrained Optimization Of Nuclear Waste Vitrification, Lagrande Gunnell, Xiaonan Lu, John D. Vienna, Dong-Sang Kim, Brian J. Riley, John Hedengren

Faculty Publications

The vitrification of high-level waste (HLW) by heating a mixture of glass-forming chemicals (GFCs) with the waste can be improved using a constrained optimization problem. This study explores how different uncertainty propagation (UP) methods implemented with the optimization process can affect the glass formulation of nuclear waste glasses. UP is the effort of propagating uncertain inputs through a system to understand and quantify output distributions. Uncertainty intervals are crafted from output distributions to inform the optimization algorithm. UP is often implemented with Monte Carlo (MC) sampling for large nonlinear systems, which can be difficult to implement within a constrained optimization …

Seal For A Wave Rotor Disk Engine, Christopher Tait, Pejman Abkari, Brian Sell, Marc D. Polanka

AFIT Patents

A unique seal for a wave rotor disk engine is disclosed herein. The seal is operable for sealing a region between a rotor and a rotor casing. The seal is spring loaded and will engage with the tip of the rotor to reduce pressure loss within the wave rotor disk engine.

Understanding Ionic Transport In Perovskite Lithium-Ion Conductor Li3/8Sr7/16Ta3/4Hf1/4O3: A Neutron Diffraction And Molecular Dynamics Simulation Study †, Danyi Sun, Nan Wu, Yeting Wen, Shichen Sun, Yufang He, Ke Huang, Cheng Li, Bin Ouyang, Ralph E. White, Kevin Huang

Faculty Publications

Solid-state Li-ion electrolytes (SSEs) are essential for the development of next-generation solid-state Li-metal batteries and new Li-extraction electrochemical cells. Among these, the perovskite-type SSE Li3/8Sr7/16Ta3/4Hf1/4O3 (LSTH) has garnered attention for Li-extraction applications, owing to its outstanding chemical and thermal stability and high ionic conductivity. However, its precise crystal structure and Li-ion transport mechanisms remain insufficiently understood. This study addresses these gaps by employing neutron diffraction to resolve LSTH's crystallography and machine learning force field (MLFF) based MD simulations to elucidate ionic transport mechanisms. A single-phase LSTH, synthesized via the sol–gel method, exhibits a room-temperature bulk conductivity of 0.418 mS cm−1 …

Impact Of Drainage Parameters On Coal Fines Production In Cbm Wells: A Long-Term Monitoring Study Of Liulin Block, Ordos Basin, China, Ziliang Liu, Yingchun Wei, Daiyong Cao, Zhenjiang You, Jin Zhang, Tao Meng, Anmin Wang, Yujie Yuan

Research outputs 2022 to 2026

Coalbed methane (CBM) horizontal wells often experience significant coal fines production during the drainage process, which disrupts efficient CBM extraction. This study monitored key drainage parameters such as gas and water production rates, bottomhole flowing pressure, and casing pressure over an extended period. We analyzed fluid samples containing coal fines to understand their concentration, particle size distribution, and morphology. By correlating these findings with drainage parameters, we identified factors influencing coal fines production and the variation patterns in coal fines concentration. The results revealed that the concentration of produced coal fines ranged from 0.01 to 6.14 g/L, with particle sizes …

Biomimetic Swarm Of Active Particles With Coupled Passive-Active Interactions, Amir Nourhani

University Research

We study the universal behavior of a class of active colloids whose design is inspired by the collective dynamics of natural systems such as schools of fish and flocks of birds. These colloids, with off-center repulsive interaction sites, self-organize into polar swarms exhibiting long-range order and directional motion without significant hydrodynamic interactions. Our simulations show that the system transitions from motile perfect crystals to solid-like, liquid-like, and gas-like states depending on noise levels, repulsive interaction strength, and particle density. By analyzing swarm polarity and hexatic bond order parameters, we demonstrate that effective volume fractions based on force-range and torque-range interactions …

Plasmonic Enhancement Of Photothermal Conversion Efficiency In Gold-Nanoparticle Hydrogels, Mai S. Rashwan, Abed M. Al-Sheikh, Harihara Baskaran, Clemens Burda

Faculty Scholarship

This study investigates the photothermal properties of citrate-capped gold nanoparticles (Au NPs) dispersed in agarose gel, examining various sizes and concentrations, particularly within a low-concentration range (0.2–2.5 nM). Heat transfer measurements are conducted on Au NP hydrogels using laser-light induced heating, revealing a size- and concentration-dependent temperature increase compared to the plain agarose gel matrix. Experimental data, combined with finite-element analysis, demonstrate that photothermal energy conversion efficiencies are dependent on NP size and concentration, while the thermal conductivity (TC) of all Au NP hydrogels remains constant and independent of these parameters within the tested concentration range. UV-visible spectroscopy indicates that …

Gratings For Enhanced Sensitivity: Advancing D-Shaped Optical Fiber Surface Plasmon Resonance Sensors With Ag-Fe2o3 Structures, Yomna Seliem, Sameh O. Abdellatif

Electrical Engineering

This research delves into enhancing biosensing sensitivity by optimizing D-shaped optical fiber surface plasmon resonance (SPR) sensors employing - structures. By investigating the influence of different grating structures—rectangular, triangular, and elliptical—on sensor performance, a comprehensive analysis was conducted to ascertain the impact of these structural variations on sensitivity and detection precision. The study revealed that while the rectangular structure exhibited a sensitivity of 6.4 µm/RIU, the triangular structure outperformed with an impressive sensitivity of 7.2 µm/RIU. Moreover, the detection accuracy, quantified by the detection angle (DA), reached µ for the triangular grating, surpassing the rectangular grating’s detection angle of µ. …

Correlating The Compositional Changes To The Rheological Properties Of Recovered Asphalt Binders From Recycled Asphalt Mixtures: Insights From The Thermogravimetric Measurements, Eslam Deef-Allah, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Assessing the binder performance of thermal characterization is critical for quality control. This is pertinent for recovered binders from mixtures, which may not be in adequate quantities to evaluate their performance, particularly in mixtures containing reclaimed asphalt pavement (RAP). The present study deployed a thermogravimetric analyzer to evaluate compositional changes in recovered binders from RAP-containing mixtures, focusing on thermograph and derivative of thermograph (DTG) characteristics and correlating the results to rheological features. Incorporating RAP in mixtures influenced recovered binders' DTG shapes, reducing low-combusted components (%LCC) and increasing residues (%R). The recovered binder from the zero-RAP-containing mixture showed a 4.36% increase …

Biomedically Vibrant And Cost-Effective Biocomposite Bone Plate – Development And Testing, Asif Mahmud Rayhan, Md Enamul Hoque, Adib Bin Rashid

Michigan Tech Publications

Bone fracture treatment requires a supportive structure called, bone plate for a specific period required to heal the fractured bone. Titanium, stainless steel, tantalum etc. are widely used as bone plates. However, these metallic bone plates lead to some major problems namely, stress shielding, bone atrophy, high cost etc. because of their very high strength compared to bones. In addition, the metallic bone plates need secondary surgery to remove it from the body. This research aims to develop a sustainable composite bone plate that is biocompatible, bio-functional, and biodegradable in the human body. Firstly, different composite samples were fabricated using …

How Shearing Affects Air Dissolution In Fresh Cement Pastes Under Pressure, Daniel Galvez-Moreno, Dimitri Feys, Kyle Riding

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The air-void system of concrete is of paramount importance to ensure freeze–thaw durability. Pumping induces detrimental changes in the air-void system of concrete by dissolving the air bubbles in the surrounding water when pressure increases due to the pump action. This research work investigates the influence of shear rate and air-void size distribution on air dissolution with time of cement pastes under pressure. Steady-state shear rheology at different shear rates was applied on samples of different air-void size distributions but similar air contents. Due to the low capillary number of the mixtures, the application of pressure caused a decrease in …

Experimental Study For Improving Oil Recovery Using Organic Alkaline And Nano-Silica For An Egyptian Oil Field, Attia Attia, Mohamed Sadek Hamedi Al, Mayar Abdelrahman Hassan Eng.

Petroleum Engineering and Gas

The oil and gas industry continually seeks innovative methods to enhance hydrocarbon recovery due to the declining productivity of conventional techniques. Current recovery methods, such as water flooding and chemical flooding, often face limitations like high interfacial tension, unfavorable wettability, and reduced mobility of oil, especially under harsh reservoir conditions of high salinity. To address these challenges, this study explores the implementation of nanotechnology in enhanced oil recovery (EOR), focusing on the distinct and unique properties of nanoparticles. Nanoparticles, particularly SiO2, were chosen for their ability to significantly decrease interfacial tension, alter wettability, and improve oil mobility. SiO2 nanoparticles exhibit …

Gravel Road Performance Enhancement, Bora Cetin, Kristin Cetin, Charan Sai Vangaveeti, Mehdi Bulduk, Md Mahir Asif

Nebraska Department of Transportation: Research Reports

Nearly 30% of roads in the U.S. are unpaved, significantly impacting rural connectivity with Nebraska alone having approximately 75% unpaved roads. This study systematically evaluates local materials to improve gravel road performance, reduce maintenance frequency, and decrease financial burdens on counties. Survey responses revealed that nearly 70% of counties follow NDOT specifications for gravel road design, while more than 90% lack knowledge of local material quality. The most common distresses identified were raveling, loss of crown, dust, and improper drainage. These findings indicate that construction practices rely heavily on experience, rather than systematic design, highlighting the need for a performance-based …

Coe Annual Technical Review 2024, Jianshun Zhang

SyracuseCoE

No abstract provided.

Collaborative Ai: Oer Materials For Exploring Ai As A Partner Rather Than A Tool, David Smith

Open Educational Resources

The Collaborative AI Open Educational Resource (OER) explores how artificial intelligence can act as a creative and analytical collaborator rather than a tool. Centered on the Balanced Blended Space (BBS) framework and the philosophy of the Center for Holistic Integration (CHI), the OER includes curriculum materials, theoretical models, and live research environments. It offers an interesting approach to blending physical, virtual, and conceptual spaces through shared human–AI agency and invites ongoing participation in interdisciplinary meta-projects.

Impact Of Aggregate Characteristics On Frictional Performance Of Asphalt-Based High Friction Surface Treatments, Alireza Roshan, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High Friction Surface Treatments (HFST) are recognized for their effectiveness in enhancing skid resistance and reducing road accidents. While Epoxy-based HFSTs are widely applied, they present limitations such as compatibility issues with existing pavements, high installation and removal costs, and durability concerns tied to substrate quality. As an alternative to traditional Epoxy-based HFSTs, this study investigated the effects of aggregate gradation as designated by agencies on the performance of asphalt-based HFST. Various aggregate types were assessed to evaluate friction performance and the impact of polishing cycles on non-Epoxy HFST. It was found that adjustments in aggregate size and gradation may …

Life Safety In The Reliability-Based Design And Assessment Of Structures, Mahesh Pandey, Celeste Viljoen, Andrew Way, Katharina Fischer, Miroslav Sykora, Dimitris Diamantidis, Raphael D. J. M. Steenbergen, Niels Lind, Dan M. Frangopol, David Y. Yang, Multiple Additional Authors

Civil and Environmental Engineering Faculty Publications and Presentations

We review the developments in life safety and the incorporation thereof in the design and assessment of structures over the last 50 years. Various measures of life safety are presented that have been developed according to the marginal life saving cost principle based on individual, societal and economic considerations. Target probabilities of failure, or target reliabilities, are central to modern structural design and assessment. These are derived either through back-calibration to existing practice or through life cycle cost minimisation, both of which yield comparable safety levels, and are underpinned by lower bounds from life safety. Life cycle cost minimisation is …

Scshm Benchmark Study On Bridge In-Service Structural Monitoring, Maria Pina Limongelli, Doug Thomson, Screenevas Alampalli, Aftab Mufti, Thomas Schumacher, Luca Martinelli, Othmane Lasri, Harry Shenton, Genda Chen, Mohammad Noori, Multiple Additional Authors

Civil and Environmental Engineering Faculty Publications and Presentations

The mission of the Society of Civil Structural Health Monitoring (SCSHM, previously known as ISHMII) is to advance the understanding and application of structural monitoring methodologies for the management of civil infrastructure systems. To enable comparative and contrasting studies of various monitoring issues and technologies, the SCSHM Committee on Data-Enhanced Infrastructures Management (DEIMC) identified the need for benchmark problems in the areas of bridge and building structural monitoring. This article reports and briefly discusses the first benchmark study on in-service structural monitoring of bridges that was developed in collaboration with the University of Manitoba, and presents the structure details, study …

A Low-Carbon Approach For Lime Production Using Self-Propagating High Temperature Synthesis-Driven Limestone Calcination, Shubham Agrawal, Sayee Srikarah Volaity, Srinivas Kilambi, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

Limestone calcination produces calcium oxide (or lime), that forms the basis for the manufacturing of many critical engineering materials such as cement and iron-and-steel. Limestone calcination—an endothermic reaction—is regarded as one of the most energy-and-CO₂ intensive industrial chemical reactions, and is facilitated by fossil fuels, since the high temperature requirement (∼900 °C) renders it less conducive to electrification through renewable energy sources. In this study, a novel, low-temperature (∼450 °C) pathway for ultrafast calcination of limestone using combustion synthesis or self-propagating high-temperature synthesis (SHS) is developed. SHS leverages exothermic heat from the combustion of lignin or biomass—as low-carbon fuels—mixed …

Artificial Intelligence And Internet Of Things Integration In Pharmaceutical Manufacturing: A Smart Synergy, Reshma Kodumuru, Soumavo Sarkar, Varun Parepally, Jignesh Chandarana

Michigan Tech Publications

Background: The integration of artificial intelligence (AI) with the internet of things (IoTs) represents a significant advancement in pharmaceutical manufacturing and effectively bridges the gap between digital and physical worlds. With AI algorithms integrated into IoTs sensors, there is an improvement in the production process and quality control for better overall efficiency. This integration facilitates enabling machine learning and deep learning for real-time analysis, predictive maintenance, and automation—continuously monitoring key manufacturing parameters. Objective: This paper reviews the current applications and potential impacts of integrating AI and the IoTs in concert with key enabling technologies like cloud computing and data analytics, …

Development Of Measures For Highway Criticality Assessment, Xu Zhang, Mei Chen

Kentucky Transportation Center Research Report

Existing network criticality assessments, often biased towards heavily used highways in populous areas by incorporating traffic and sociodemographic attributes, can lead to an underestimation of the vital role of rural infrastructure. Consequently, rural highways, particularly low-volume roads, often receive less consideration despite their critical role in network connectivity and local access to services and economic opportunities. To address this, we develop a criticality framework based on the egalitarian principle, which prioritizes equitable consideration of all network links regardless of traffic volume or population density, comprising two complementary measures. First, the normalized betweenness centrality quantifies a road's relative importance in efficiently …