Engineering Commons^™

The Influence Of Surface Textural Properties And Adsorption Temperature On H2 Adsorption And Storage Performance Of Mil-88b(Fe) Mofs, Tawanda Matamba, Samira Sadeghi, Hussein Rasool Abid, Masoumeh Zargar, Alireza Keshavarz, Stefan Iglauer

Research outputs 2022 to 2026

To advance the establishment of a stable H2 economy we need to solve the issue regarding its storage. The physicochemical properties of Metal Organic Frameworks (MOFs) make them suitable for H2 storage. Therefore, here, we synthesized two Iron-based MOFs (12-MIL-88 B(Fe), 24-MIL-88 B(Fe) at different reaction times (12 h and 24 h), to investigate the relationship between adsorption temperature and pressure with the material's surface textural properties towards H2 storage (at 30 °C, 0 °C, −78.5 °C, and −196.15 °C and from vacuum pressure to 55 bar). Results showed that at 30 °C and 0 °C adsorption temperature, H2 adsorption …

Anisotropic Object-Based Shifts Of Attention Arise From Unequal Influences Of Visual Field Meridians On Neural Attention Gradients, David H. Hughes, Adam J. Barnas, Adam S. Greenberg

Biomedical Engineering Faculty Research and Publications

Object-based attention prioritizes the processing of information appearing within a selected object. We previously showed an object-based shift direction anisotropy (SDA) whereby horizontal shifts are more efficient than vertical shifts (Barnas AJ, Greenberg AS. Atten Percept Psychophys 78: 1985–1997, 2016; Barnas AJ, Greenberg AS. Vis Cogn 27: 768–791, 2019), an effect modulated by the visual field meridians (Barnas AJ, Greenberg AS. Q J Exp Psychol (Hove) 77: 2516–2532, 2024). Our present aim was to understand how the functional brain mechanisms of attention give rise to the SDA. We hypothesized that the SDA arises from attentional resources being partitioned differently by …

Ferroelectricity And Multiferroicity In Ultrathin Films Of Unconventional Transition Metal Oxide, Xin Li

Department of Physics and Astronomy: Dissertations, Theses, and Student Research

Ferroic orders of transition metal oxides, such as ferroelectricity and ferromagnetism, are determined by the intercoupling between spin, charge, lattice. Consequently, ferroic epitaxial thin films have attracted wide interest due to the profuse novel phenomena and the great application potentials for modern electronics. However, the mainstream of the study for transition metal oxides has focused on perovskite structure, limiting the understanding and discovery of novel phenomena associate with ferroic orders. In this thesis, the epitaxial films of hexagonal rare-earth ferrites (h-RFeO₃) and fluorite-structure hafnia oxide (HfO₂) are studied comprehensively, providing new experimental and theoretic …

Enhancing Microgrid Protection Through Adaptive Decentralized Relay Coordination: A Solution To Blinding And Sympathetic Tripping, Sujatha Balasubramanian, J. Preetha Roselyn, Prabha Sundaravadivel

Electrical Engineering Faculty Publications and Presentations

Integrating Distributed Energy Resources into microgrids modifies the network’s system parameters and causes it to exhibit behaviour, particularly during fault conditions. This is due to the greater variations in current direction and magnitude. When a microgrid runs in autonomous mode, Distributed Generators result in a reduced short circuit current compared to a system working in grid-connected mode. Microgrid protection issues, namely, blinding of protection, sympathetic tripping, and bidirectional power flow, occur in the power network under such circumstances. The impact of microgrid protection issues and changes in fault current leads to variations of overcurrent relay settings, their operating time and …

Examining Shock Wave Flow Past The Brim Of A Helmet Using Schlieren Imaging, Cody Thomas, Catherine E. Johnson

Mining Engineering Faculty Research & Creative Works

Increasing the protection a helmet provides the user from shock waves can help reduce the prevalence of blast induced traumatic brain injury (bTBI). Previous research has shown that air enters and gets trapped in the helmet-head cavity and can increase the overpressure experienced by the wearer. The brim design of the helmet has yet to be studied to understand how shock waves flow into the helmet. By studying a variety of brims, it is possible that the design can be modified to minimize shock wave flow into the helmet. This paper investigated a shock wave impacting interior and exterior facing …

Low-Power Hardware-Based Real-Time Cervical Spine Localization Via Image Processing, Patricia Angela R. Abu, Chao-Shin Liu, Sung-Hsin Tsai, Po Lin Huang, Hong-Kai Wang, Shih Wei Chung, Chiung-An Chen, Shih-Lun Chen, Sze-Teng Liong, Tsung-Yi Chen

Department of Information Systems & Computer Science Faculty Publications

With the growing prevalence of cervical spine degeneration in the aging population, there is an urgent need for accurate and real-time cervical image analysis to assist in preliminary evaluations during neurosurgical outpatient visits. This study suggests a hard-ware-based real-time cervical spine localization system that uses image preprocessing algorithms to address this need. The system can quickly finish image enhancement and greatly speed up the localization process by turning preprocessing steps like median filtering and binarization into hardware modules. With a power consumption as low as 4.859 mW, the proposed hardware-based median filter demonstrates over 60% reduction in power and 35% …

Dealuminated Metakaolin In Supplementary Cementitious Material And Alkali-Activated Systems: A Review, Amany G. Micheal Prof., Mostafa Adel Elsebaei Eng., Maria Mavroulidou Prof., Maria Centeno Assoc. Prof., Rabee Shamass Senior Lec., Ottavia Rispolio Mrs.

Architectural Engineering

This paper presents a comprehensive review of dealuminated metakaolin (DK), a hazardous industrial by-product generated by the aluminium sulphate (alum) industry and evaluates its potential as a component in cementitious systems for the partial or full replacement of Portland cement (PC). Positioned within the context of waste valorisation in concrete, the review aims to establish a critical understanding of DK formation, properties, and reactivity, particularly its pozzolanic potential, to assess its suitability for use as a supplementary cementitious material (SCM), or as a precursor in alkali-activated cement (AAC) systems for concrete. A systematic methodology is used to extract and synthesise …

Development Of A Machine Learning Framework For An Irrigation Decision Support System, Eric Wilkening, Derek M. Heeren, Yeyin Shi, Laila A. Puntel, Guillermo R. Balboa, Abia Katimbo, Kuan Zhang, Precious Nneka Amori, Bruno Lena

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Currently used irrigation scheduling techniques often require significant human intervention and are time consuming, particularly for variable rate irrigation. This research aimed to develop a conceptual framework that incorporates disparate data sources leveraging both mechanistic and machine learning (ML) approaches. The overarching objective is to utilize the growing availability of data and technology to manage irrigation more precisely, which will minimize negative impacts of irrigation on our water resources. An initial irrigation machine learning model was proposed and tested in this study as a key component of an edge-cloud computing and federated learning decision-making framework. The specific objectives were (1) …

Curved Confinement Directs Anchoring-Mediated Structural Transitions In Highly Chiral Liquid Crystal Shells, Sepideh Norouzi, Jeremy Money, Stiven Villada-Gil, José Martínez-Gonález, Monirosadat Sadati

Faculty Publications

Cholesteric liquid crystals (CLCs) confined in curved geometries exhibit a rich spectrum of defectmediated morphologies governed by the interplay between chirality, curvature, surface anchoring, and confinement. This study systematically investigates structural transitions in highly chiral CLC shells under asymmetric anchoring conditions, focusing on the effects of shell thickness and curvature on pitch axis reorientation and defect formation. Utilizing microfluidic techniques, we generate core–shell droplets with independently tunable anchoring at inner and outer aqueous interfaces. Transitioning from planar–planar to planar-homeotropic boundary conditions via surfactant-mediated modulation induces profound reorganizations in the director field, giving rise to focal conic domains (FCDs), stripe patterns, …

A Three-Stage Matheuristic For The Blood Stochastic Inventory Routing Problem, Vincent F. Yu, Nabila Salsabila, Aldy Gunawan, Aldy Gunawan, Nurhadi Siswanto

Research Collection School Of Computing and Information Systems

This research introduces a blood distribution system under vendor-managed inventory that considers uncertain supply and demand. We present it as the Blood Stochastic Inventory Routing Problem, formulating it as a two-stage stochastic programming model. To solve this problem, this study proposes a three-stage matheuristic that combines a perturbation heuristic, Adaptive Large Neighborhood Search, and an exact approach. From historical data of Surabaya Blood Center in Indonesia, six sets of new instances are generated under different settings. Computational results show that our proposed three-stage matheuristic outperforms CPLEX and a two-stage matheuristic by gaining optimal or better solutions within a significantly shorter …

Assessing The Robustness Of Test Selection Methods For Deep Neural Networks, Qiang Hu, Yuejun Guo, Xiaofei Xie, Maxime Cordy, Wei Ma, Mike Papadakis, Lei Ma, Yves Le Traon

Research Collection School Of Computing and Information Systems

Regularly testing deep learning-powered systems on newly collected data is critical to ensure their reliability, robustness, and efficacy in real-world applications. This process is demanding due to the significant time and human effort required for labeling new data. While test selection methods alleviate manual labor by labeling and evaluating only a subset of data while meeting testing criteria, we observe that such methods with reported promising results are simply evaluated, e.g., testing on original test data. The question arises: are they always reliable? In this article, we explore when and to what extent test selection methods fail. First, we identify …

Advancement Of Biocarbon Materials In Sustainable Thermal And Electrochemical Energy Storage With Future Outlooks, Md Shahriar Mohtasim, Barun K. Das

Research outputs 2022 to 2026

Biocarbon exhibits significant potential in thermal and electrochemical energy storage owing to its higher surface area, flexible porosity, and superior thermal stability, facilitating effective energy absorption, storage, and conversion. Additionally, its sustainable and cost-effective nature, derived from renewable biomass, aligns with the growing demand for eco-friendly solutions. There is not enough review work that offers comprehensive details on the unique properties of biocarbon (both animal and plant-derived), synthesis and characterization methods, the root level mechanism of biocarbon's interaction with phase change materials (PCMs) matrix, the generalization of thermal and electrochemical regulation with an emphasis on the benefits to the environment …

Lithium Slag As A Supplementary Cementitious Material For Sustainable Concrete: A Review, Sajad Razzazan, Nuha S. Mashaan, Themelina Paraskeva

Research outputs 2022 to 2026

The global cement industry remains a significant contributor to carbon dioxide (CO2) emissions, prompting substantial research efforts toward sustainable construction materials. Lithium slag (LS), a by-product of lithium extraction, has attracted attention as a supplementary cementitious material (SCM). This review synthesizes experimental findings on LS replacement levels, fresh-state behavior, mechanical performance (compressive, tensile, and flexural strengths), time-dependent deformation (shrinkage and creep), and durability (sulfate, acid, abrasion, and thermal) of LS-modified concretes. Statistical analysis identifies an optimal LS dosage of 20–30% (average 24%) for maximizing compressive strength and long-term durability, with 40% as a practical upper limit for tensile and flexural …

Mxenes At The Forefront: Advances In Energy Storage And Nanofluidic Applications, Zafar Said, Maham Aslam Sohail, Hassina Tabassum, Imran Haider Sajid, Hafiz Muhammad Ali, Furqan Jamil, Yogendra Kumar Mishra, A. K. Pandey

Research outputs 2022 to 2026

This review summarizes recent studies on MXenes and their composites regarding energy storage and nanofluidic devices. MXenes are a new family of two-dimensional transition metal carbides and nitrides that have gained much attention in recent times due to their excellent physicochemical properties, such as its exceptionally high electrical conductivity, even more than that of metals, thermal stability, hydrophilicity, high energy and power densities, tunable structures, and large surface area along with abundant electrocatalytically active sites. These features, along with larger interlayer gaps compared with graphene, point to the emergence of MXenes as energy storage alternatives. Synthesis, properties, and applications of …

Mining Waste In Asphalt Pavements: A Critical Review Of Waste Rock And Tailings Applications, Adeel Iqbal, Nuha S. Mashaan, Themelina Paraskeva

Research outputs 2022 to 2026

This paper presents a critical and comprehensive review of the application of mining waste, specifically waste rock and tailings, in asphalt pavements, with the aim of synthesizing performance outcomes and identifying key research gaps. A systematic literature search yielded a final dataset of 41 peer-reviewed articles for detailed analysis. Bibliometric analysis indicates a notable upward trend in annual publications, reflecting growing academic and practical interest in this field. Performance-based evaluations demonstrate that mining wastes, particularly iron and copper tailings, have the potential to enhance the high-temperature performance (i.e., rutting resistance) of asphalt binders and mixtures when utilized as fillers or …

Autoregressive Temporal Modeling For Advanced Tracking-By-Diffusion, Pha Nguyen, Rishi Madhok, Bhiksha Raj, Khoa Luu

Electrical Engineering and Computer Science Faculty Publications and Presentations

Object tracking is a widely studied computer vision task with video and instance analysis applications. While paradigms such as tracking-by-regression,-detection,-attention have advanced the field, generative modeling offers new potential. Although some studies explore the generative process in instance-based understanding tasks, they rely on prediction refinement in the coordinate space rather than the visual domain. Instead, this paper presents Tracking-by-Diffusion, a novel paradigm for object tracking in video, leveraging visual generative models via the perspective of autoregressive models. This paradigm demonstrates broad applicability across point, box, and mask modalities while uniquely enabling textual guidance. We present DIFTracker, a framework that utilizes …

Synergistic Enhancement Of Tribological Behavior And Colloidal Stability In Cuo Nanolubricants Via Ligand Tuning, Sherif Elsoudy, Sayed Akl Akl Dr, Sayed Akl A. Akl Dr, Esm Lane, Abas Hadawey, Philip D. Howes

Mechanical Engineering

Nanoparticle-based lubricants, or nanolubricants, can exhibit superior tribological properties compared to unmodified base oils. However, these performance gains are highly dependent on the nanoparticle surface chemistry, particularly in maintaining stable colloidal dispersions. This study explores the influence of oleic acid (OA) and oleylamine (OAm) functionalization on the tribological and colloidal properties of CuO nanoparticles dispersed in an SAE 20W50 base oil. We present a hybrid optimization framework combining Response Surface Methodology (RSM) with Bayesian Optimization (BO) to identify the optimal OA to OAm ratio (OA–OAm) for CuO nanolubricants. Unlike prior studies that employed either RSM alone or trial-and-error approaches, this …

Applying Large Language Models For Surgical Case Length Prediction, Adhitya Ramamurthi, Bhabishya Neupane, Priya Deshpande, Ryan Hanson, Srujan Vegesna, Deborah Cray, Bradley H. Crotty, Melek Somai, Kellie R. Brown, Sachin S. Pawar, Bradley Taylor, Anai N. Kothari

Electrical and Computer Engineering Faculty Research and Publications

Importance Accurate prediction of surgical case duration is critical for operating room (OR) management, as inefficient scheduling can lead to reduced patient and surgeon satisfaction while incurring considerable financial costs.

Objective To evaluate the feasibility and accuracy of large language models (LLMs) in predicting surgical case length using unstructured clinical data compared to existing estimation methods.

Design, Setting, and Participants This was a retrospective study analyzing elective surgical cases performed between January 2017 and December 2023 at a single academic medical center and affiliated community hospital ORs. Analysis included 125493 eligible surgical cases, with 1950 used for LLM fine-tuning and …

Microstructural Investigation Of Graphene Reinforced Nickel Aluminum Bronze Prepared Via Laser Powder Bed Fusion, Wen Qian, Maxwyll Mcconnell, Jazmin Ley, Luke Schwaninger, Xin Chen, Bai Cui, Joseph A. Turner

Mechanical Engineering Faculty Publications

Nickel aluminum bronze (NAB) powders coated with reduced graphene oxide (RGO) were successfully fabricated using additive manufacturing (AM) via laser powder bed fusion. The resulting samples were characterized using a suite of complementary techniques, including x-ray diffraction, scanning electron microscopy, energy-dispersive x-ray spectroscopy, nanoindentation, x-ray computed tomography, and electron backscatter diffraction. These methods were employed to reveal the micro- and nanoscale features within the fine dendritic microstructure. The as-fabricated microstructures were observed to deviate significantly from typical as-cast configurations. In the AM RGO-coated NAB specimens, the formation of the κ_I phase was notably suppressed and is attributed to the …

Drift Dynamics Of Early Life-Stage Invasive Carps, Saurav Karki

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Asian carp species pose significant ecological threats to North American freshwater systems due to their invasive nature and prolific reproduction. Their semi buoyant eggs develop while drifting downstream with the river current. Understanding early life-stage transport is therefore critical for predicting recruitment potential and guiding management efforts. Existing fluvial egg drift models, including those relying on 1-D hydraulics and fully 3-D CFD-based models, are either inadequate for complex braided rivers or too computationally demanding for large-scale application. The Platte River in Nebraska, characterized by wide, shallow, multi-threaded channels, is dominated by two-dimensional flow conditions, making a depth-averaged 2-D modeling approach …

Impact Of Humidity From Shrink (Wrap) Tunnels On Refrigeration Systems: Comparing Economic And Environmental Impact Of Natural Gas And Electric, Segun Samuel Oladipo

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This thesis examines the economic and environmental effects of electric and steam shrink-wrapping tunnels used in beef packaging processes, paying particular attention to the indirect refrigeration loads caused by the heat and humidity that each system releases. Traditional sustainability evaluations frequently ignore these indirect impacts, which are especially important in meat processing facilities where 45–55% of electricity use is attributed to refrigeration. Life cycle assessment (LCA), field measurements, and thermodynamic modeling are all used in this work to offer a thorough analysis of both tunnel types.

The case study facility in Nebraska operates both steam and electric shrink tunnels to …

The Significance Of Snow In Hydrometeorological Extremes, Sinan Rasiya Koya

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Snow is the largest natural reservoir on Earth. It accumulates water during the cold and dry months and releases it during warm and dry months. Societies, especially in the extratropical zone, heavily depend on snow as their freshwater resources, resulting in the massive economic value of snow. The recent changes in snowpacks and associated processes are concerning. We are susceptible to disruptions in snow processes, which can have disastrous implications. Yet the importance of snow is often not realized by a wider population. There are limited studies quantifying snow-related extremes, partly stemming from the limitations of existing methodologies.

This dissertation …

Development And Evaluation Of Supported Ionic Liquid Membrane And Porphyrin Frameworks For Carbon Capture Separation, Sarang Ismail

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

The global urgency to mitigate anthropogenic CO₂ emissions has intensified the pursuit of energy-efficient separation technologies. Supported Ionic Liquid Membranes (SILMs) have emerged as promising candidates for CO₂ capture due to their tunable solubility-selectivity and low energy requirements. However, challenges such as mechanical instability, limited scalability, and trade-offs in transport performance have impeded their widespread adoption.

This thesis explores a systematic approach to designing and optimizing SILMs for enhanced CO₂ separation by tailoring polymer–ionic liquid interactions, processing conditions, and material architectures. A comprehensive set of studies were conducted using poly(vinylidene fluoride) (PVDF) with varying molecular weights, different grades of PEBAX®, …

Heat-Pipe-Based Thermal Management System Design For A 250-Kw Gan-Based Integrated Modular Motor Drive, Seyed Iman Hosseini Sabzevari, Salar Koushan, Armin Ebrahimian, Towhid Islam Chowdhury, Nathan Weise, Ayman El-Refaie

Electrical and Computer Engineering Faculty Research and Publications

Integrated modular motor drive (IMMD) is an effective approach for realizing high-efficiency, high-power-density, and fault-tolerant electric machines. However, designing an efficient thermal management system (TMS) for the motor drive becomes a challenge, particularly due to space constraints. This article presents the design of a TMS based on 3-mm heat pipes for a 250-kW IMMD intended for aviation applications. The power electronics module is simulated using PLECS software where an electrothermal analysis is conducted. A simplified thermal resistance model of the system is developed to estimate the die junction temperature of gallium nitride (GaN) semiconductors. The performance of the proposed TMS …

Impact Of Biodegradation On The Mechanical And Fatigue Properties Of 3d-Printed Pla Bone Scaffolds, Hamed Bakhtiari, Alireza Nouri, Muhammad Aamir, Mohadeseh Najafi, Majid Tolouei-Rad

Research outputs 2022 to 2026

A proper degradation rate of bone scaffolds ensures optimal mechanical support and effective tissue regeneration. The present study examines the degradation effects of simulated body fluids (SBF) on the compressive and fatigue strength of 3D-printed PLA bone scaffolds. Scaffolds with varying surface-to-volume (S/V) ratios and identical porosity (60 %) were immersed in Hanks' solution for a maximum period of 30 days. Static and dynamic compression tests were performed at different immersion times to assess how S/V ratio influences the degradation process. CT images showed that scaffold pore structure remained interconnected after biodegradation, with no significant change in strut thickness or …

From Waste To Solution: Modeling And Characterization Of Grape Seed Bio-Waste For Phosphate Removal From Wastewater, Abeer Al-Bsoul, Zakaria Al-Qodah, Muhammad Tawalbeh, Khalid Bani-Melhem, Khalideh Al Bkoor Alrawashdeh, Mohammad Hailat, Ahmed A. Al-Taani, Eid Gul

All Works

In this study, particles of ground grape seeds were utilized to adsorb phosphate ions from a prepared solution, aiming to reduce phosphate concentration. Through a series of adsorption experiments, the effects of the adsorbent concentration, initial phosphate ion concentration, temperature, and pH on the phosphate ion uptake were studied. The removal efficiency of the phosphate ion decreased from 77 to 61% as a 25 to 45 °C increment in temperature was observed, which indicated the exothermicity in the adsorption process. The phosphate ion movement onto the adsorbent surface that exhibited the highest uptake value favored a neutral reaction environment with …

Revealing Building Operating Carbon Dynamics For Multiple Cities, Winston Yap, Abraham Noah Wu, Clayton Miller, Filip Biljecki

Research Collection College of Integrative Studies

Achieving carbon neutrality is a critical yet elusive goal for many cities, hindered by limited understanding of the relationship between building emissions and their surroundings. To address this challenge, we present a generalizable open science framework that integrates building energy-consumption data, multi-modal geospatial inputs and graph deep learning to quantify building operating emissions and their links to urban form and socio-economic factors. Applying this approach to five cities with diverse climates and planning contexts—Melbourne, New York City (Manhattan), Seattle, Singapore and Washington DC—we demonstrate that our models explain 78.4% of the variation in building operating carbon emissions across cities, achieving …

International Comparison Of Weather And Emission Predictive Building Control, Christian Hepf, Ben Gottkehaskamp, Clayton Miller, Thomas Auer

Research Collection College of Integrative Studies

Building operational energy alone accounts for 28% of global carbon emissions. A sustainable building operation promises enormous savings, especially under the increasing concern of climate change and the rising trends of the digitalization and electrification of buildings. Intelligent control strategies play a crucial role in building systems and electrical energy grids to reach the EU goal of carbon neutrality in 2050 and to manage the rising availability of regenerative energy. This study aims to prove that one can create energy and emission savings with simple weather and emission predictive control (WEPC). Furthermore, this should prove that the simplicity of this …

Developing An Integrated Risk Assessment Framework To Quantify The Resilience Of Critical Railway Infrastructure: Characterization Of Risks And Hazards To The U.S. Rail Network Through Empirical Data And Past Events, Haizhong Wang, Brian M. Staes, Benyamin Ghoreishi

Mineta Transportation Institute

To improve understanding of the impact of natural hazards on the U.S. railway system, this project developed a comprehensive, geospatially precise dataset that maps historical hazard events to specific rail segments. The project provides insight into when, where, and how much damage natural hazards have inflicted on rail infrastructure across the country. While a rail-specific hazard database did not previously exist, this research combines data from the Geological Survey (USGS) Flood Events Database, Hydrologic Unit Codes (HUC), the National Centers for Environmental Information (NCEI) from the National Oceanic and Atmospheric Administration (NOAA), and the National Weather Service (NWS) forecast zones. …

Impact Of Non-Uniform Surface Temperature On The Apparent Radiative Properties Of Cavity Receivers, Ehsan Mofidipour, Matthew R. Jones, Brian D. Iverson

Faculty Publications

Radiative surface properties play a critical role in the design, analysis and optimization of solar–thermal systems. Cavity receivers increase the efficiency of solar–thermal energy systems through the cavity effect. The cavity effect refers to increased absorption of radiation due to multiple reflections within a cavity. Apparent radiative surface properties of a cavity characterize the effective interactions of radiation passing through an imaginary surface covering the cavity aperture. In this study, we investigate the extent to which the apparent emissivity of a cavity with a non-uniform surface temperature profile may be estimated using an isothermal enclosure model. A cylindrical cavity was …