Engineering Commons^™

Data Compression In Additive Manufacturing: Recent Progress And Opportunities, Dongmin Ethan Kang, Wenmeng Tian

Publications

A crucial aspect of quality control for Additive Manufacturing (AM) processes is the acquisition of diverse data from the entire lifecycle of the product. AM data has grown significantly in terms of diversity and volumes, resulting in diverse data formats of increasing volumes, including time series, images, and point clouds. Large quantities of these data are essential for effective in-situ process monitoring and ex-situ non-destructive evaluation. However, this will result in large manufacturing and inspection datasets that are difficult to manage for users, which will delay the broader adoption of AM for mission critical applications. This motivates the urgent need …

Analyzing Lf/Vlf Lightning Waveforms To Estimate D-Region Electron Density Profiles, William R. Smith, Erin H. Lay, Kyle E. Fitch, Daniel J. Emmons

Faculty Publications

Lightning waveforms in the low frequency (LF; 30–300 kHz) and the very low frequency (VLF; 3–30 kHz) bands can be exploited to produce data-driven ionospheric D-region electron density profile (EDP) estimates with significantly higher spatial and temporal coverage than previously available. The lightning waveforms used in this paper are signals detected in the LF/VLF of negative cloud-to-ground lightning by the Earth Networks Total Lightning Detection Network. Each waveform contains a ground wave and a time-delayed ionospheric reflection. The time delay between the ground wave and ionospheric reflection has previously been used to estimate a single specular reflection altitude, where LF/VLF …

Irrigation Scheduling Methods: Checkbook Vs Fao-56, Adarsha Neupane, Vidya Samadi

Forestry and Natural Resources

Irrigation scheduling addresses two critical questions: when to irrigate and how much water to apply. Providing the optimal amount of water at the right time enhances water use efficiency, leading to improved crop production, while minimizing water losses and ensuring sustainable water management. This article compares two widely used soil water balance-based irrigation scheduling methods—Checkbook and FAO-56—by evaluating their principles, advantages, and limitations, with a focus on how each method tracks and manages soil moisture. To illustrate their differences, we present example calculations demonstrating how each method estimates irrigation timing and amount. The Checkbook method, widely adopted for its simplicity, …

Magnetic Nanoparticles Tethered With Zn–Dpa For The Removal Of Bacteria From Red Blood Cell Suspension, Tochukwu P. Okonkwo, Rajendra P. Gautam, Jacob B. Limburg, Breckin L. Forstrom, Bowen J. Houser, Aaron Rappleyea, Tyler P. Green, Joseph P. Talley, Alexander D. Daum, Stacey J. Smith, Karine Chesnel, William G. Pitt, Roger G. Harrison

Faculty Publications

Bacterial infections continue to drive the need for more effective and rapid methods for bacterial analysis. To address this, magnetic nanoparticles (MNPs) have emerged as promising tools, especially when their surfaces are modified with bacteria binders. The bis-zinc–dipicolylamine (Zn–DPA) complex is known for its broad affinity to bacteria. We have synthesized MNPs via a thermal decomposition method, encapsulated them in silica, modified their surface with Zn–DPA, and tested their ability to remove bacteria. The MNPs retain their superparamagnetic properties and crystallite structure after being encapsulated. The MNPs coated with silica and Zn–DPA effectively bind and remove both Gram-positive and Gram-negative …

A Pilot Study On Tissue Deformation Using An Integrated Sensor–Actuator Blood Collection Setup In Aquaculture (Salmo Salar), Ishrak Siddiquee, Md Ebne Al Ashad, Ahmed Hasnain Jalal

Electrical and Computer Engineering Faculty Publications

This pilot study presents a sensor–actuator setup designed to evaluate tissue deformation in Atlantic Salmon (Salmo salar) during needle insertion. The system integrates three types of low-cost, commercially available force sensors to capture force profiles and identify biomechanical events associated with tissue layer transitions. Controlled insertions were performed on a deceased specimen, and the resulting force data were analyzed to quantify insertion dynamics and estimate tissue deformation. A simulation model based on the recorded force values was developed to calculate stress distribution and deformation, which ranged from 0.001 µm to 8.4 µm and from 0.3 N/m2 to 4.9 N/m2, respectively. …

The Atmospheric Waves Experiment (Awe), L. Scherliess, M. J. Taylor, P.-Dominique Pautet, Y. Zhao, B. Lamborn, H. Latvakoski, G. Cantwell, P. Sevilla, E. Syrstad, J. Forbes, S. Eckermann, D. Fritts, D. Janches, H. Liu, J. Snively

Space Dynamics Laboratory Publications

Modern theory and modeling indicate that atmospheric gravity waves (AGWs) play an important role in vertical coupling of the atmosphere-ionosphere system. Although small-scale AGWs (horizontal wavelengths ~30–300 km) are thought to account for the dominant energy and momentum inputs at Ionosphere-Thermosphere-Mesosphere (ITM) altitudes, the sources, variability, and influences of small-scale AGWs are still major unknowns. NASA’s Atmospheric Waves Experiment (AWE) mission is a Heliophysics Small Explorers Mission of Opportunity designed to investigate how terrestrial weather affects space weather, via small-scale AGWs produced in Earth’s atmosphere. Installed on the International Space Station (ISS) in November 2023, AWE began its 2-year mission …

Clinic Vs. Daily Life Gait Characteristics In Patients With Spinocerebellar Ataxia, Vrutangkumar V. Shah, Daniel Muzyka, Adam Jagodinsky, Hannah Casey, James Mcnames, Mahmoud El-Gohary, Kristen Sowalsky, Delaram Safarpour, Patricia Carlson-Kuhta, Fay B. Horak, Christopher M. Gomez

Electrical and Computer Engineering Faculty Publications and Presentations

Background:

Recent findings suggest that a single gait assessment in a clinic may not reflect everyday mobility.ObjectiveWe compared gait measures that best differentiated individuals with spinocerebellar ataxia (SCA) from age-matched healthy controls (HC) during a supervised gait test in the clinic vs. a week of unsupervised gait during daily life.

Methods: Twenty-six individuals with SCA types 1, 2, 3, and 6, and 13 (HC) wore three Opal inertial sensors (on both feet and lower back) during a 2-minute walk in the clinic and for seven days in daily life. Seventeen gait measures were analyzed to investigate the group differences using …

Experimental And Theoretical Studies Of Novel Resilient Smart Shear Keys For Speedy Functional Recovery Of Highway Bridges After Extreme Events, Xinzhe Yuan, Jun Han, Jian Zhong, Haibin Zhang, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Sacrificial shear keys in small-to-medium-span highway bridges mainly provide lateral support to the bridge superstructure under extreme events such as earthquake and/or tsunami. However, such support could lead to irreparable harm to important bridge elements like abutments and bent caps (base), delaying the functional recovery of bridges in the aftermath. In addition, existing designs of the shear key primarily emphasize resistant capacity but overlook resilience. This study introduces a new sliding, modular, adaptive, replaceable, and two-dimensional (SMART) shear key designed to enhance the resilience of I-girder highway bridges. The SMART shear key has three primary goals: 1) enabling the rapid …

Positive Effects Of Sulfates On Performance Of Cement Paste Incorporating Low-Grade, High-Aluminum Steel Slag, Nannan Zhang, Gao Deng, Wenyu Liao, Chuanlin Hu, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Steel slag with high aluminum (Al) content significantly delays the early hydration of cement when used as a supplementary cementitious material (SCM). To address this challenge, this study investigates the effects of gypsum (Gy) and sodium sulfate (SS) additions on the performance of cement pastes with 30 % high-Al ladle metallurgy furnace (LMF) slag. The mechanical properties, hydration kinetics, phase evolution, as well as the early-age hydration mechanism were explored. The results indicate that C3S hydration is substantially inhibited under high-Al conditions, mainly attributed to the rapid dissolution and reaction of reactive aluminates (particularly mayenite) in the slag. Both Gy …

Risk Allocation Model For Price Escalations In Construction Projects: Integrating Bargaining Game Theory And Probabilistic Bayesian Modeling, Yasser Jezzini, Rayan H. Assaad, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Economic market uncertainties, like those witnessed during pandemics and supply chain-related challenges, introduce complexity in ascertaining precise price estimates for construction materials. Despite some studies on risk allocation in construction projects utilizing quantitative and qualitative approaches, these studies fail to explain the underlying process of risk allocation due to a lack of theoretical support, indicating a need for a more structured and theoretically grounded approach to understanding risk allocation, specifically under volatile market conditions. To bridge this knowledge gap, this study proposes a novel game-theoretical model integrating Bayesian statistics and bargaining game theory dynamics, offering a robust framework for optimal …

Progressive Insights Into 3d Bioprinting For Corneal Tissue Restoration, Ilayda Namli, Deepak Gupta, Yogendra Pratap Singh, Pallab Datta, Muhammad Rizwan, Mehmet Baykara, Ibrahim T. Ozbolat

Michigan Tech Publications

The complex architecture of the cornea, characterized by specifically organized collagen fibrils and distinct cellular layers, poses significant challenges for traditional tissue engineering strategies to replicate its native function. 3D Bioprinting offers a promising solution by enabling the precise, layer-by-layer fabrication of corneal tissues, closely mimicking the essential characteristics needed for vision restoration and long-term graft success. This Review critically examines the key biomechanical, optical, and structural attributes of the cornea necessary for its effective engineering and accurate 3D bioprinting. It provides a comprehensive overview of different 3D bioprinting modalities utilized for corneal tissue engineering and offers insights into potential …

Development Of A Balanced Mix Design Approach For Stone Matrix Asphalt Mixtures, Bo Lin, Yizhuang David Wang, Jenny Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Stone Matrix Asphalt (SMA) has been widely used as a durable, high-quality mixture for primary roads. With the growing interest in incorporating innovative materials into SMA designs, developing effective and reliable mix design methodologies has become essential to ensure durability, sustainability, and cost-effectiveness. While performance tests have gained national acceptance for asphalt mix design and balanced mix design (BMD) methods have been adopted in many states for hot mix asphalt (HMA), SMA has not been fully considered with the BMD implementation. This study aimed to develop a BMD approach for SMA, incorporating both SMA-specific volumetric parameters and performance requirements. To …

Performance Evaluation Of Kytc Bridge Deck Overlays Used For Maintenance Activities, Sudhir Palle, Christopher Goff

Kentucky Transportation Center Research Report

State departments of transportation use bridge deck overlay systems to prolong bridge deck service lives. Consisting of a thin layer of material applied to a concrete bridge deck surface, overlays form a protective barrier that improves ride quality, protects embedded reinforcement from harsh environmental conditions, enhances structure durability, and improves deck drainage. Over the past 20 years, the Kentucky Transportation Cabinet has made significant investments in overlays, rehabilitating nearly 5,000 bridge decks with them — roughly ¹/₃ of all bridges statewide. Given the significant investment in overlays, and the fact they degrade over time — eventually re-exposing bridge …

Formation Of A Prism-Focused Working Group To Address Mcrs Issues And Expanded Prism Requirements, Brian Howell, Robin Baskette, Jennifer Walton

Kentucky Transportation Center Research Report

This study, sponsored by the International Registration Plan (IRP), Inc. in partnership with the Kentucky Transportation Center (KTC), examined systemic challenges and opportunities to strengthen two critical safety oversight mechanisms in U.S. commercial vehicle operations—the Motor Carrier Responsible for Safety (MCRS) and the Expanded Performance and Registration Information Systems Management (PRISM) program. The research traced the evolution of federal and state data systems used to identify and monitor carriers, emphasizing the modernization role of the IRP Data Repository (IDR). The IDR now provides a secure, centralized platform for daily vehicle registration data and financial transactions, facilitating the exchange of carrier …

Effect Of Graphene Nanoplatelets Fraction On The Microstructure And Mechanical Properties Of Inconel 718 Composites Prepared By Spark Plasma Sintering, Sanoj Karki, Manoj Mugale, Satyavan Digole, Amit Choudhari, Mayank Garg, Caleb Schenck, Fu-Yun Tsai, Bharat Gwalani, Tushar Borkar

Mechanical Engineering Faculty Publications

Nickel-based superalloy, particularly Inconel 718, is a promising candidate in advanced structural and high-temperature applications, including turbine blades, combustors, and turbochargers. However, high-efficiency energy systems such as jet engines and land-based gas turbines demand increasingly high strength for advanced structural applications. Therefore, significant efforts are underway to enhance the strength of these materials. Reinforcement of graphene nanoplatelet (GNP), owing to its exceptional mechanical strength, lightweight, high aspect ratio, and high level of coherency with metal matrix, has been proposed as an effective way of incorporating high strength into the existing Inconel 718. In addition, the spark plasma-assisted heating process is …

A Tailored Analog-To-Digital Converter Architecture For Optimal Performance In Troponin Cardiac Protein Detection, Karem Abdelgawad, Sameh O. Abdellatif

Electrical Engineering

In recent years, the detection of troponin cardiac proteins has emerged as a crucial component in the diagnosis and management of acute coronary syndromes. This paper presents a tailored analog-to digital converter(ADC) architecture specifically designed to enhance the performance of diagnostic systems for troponin detection. Utilizing a 180 nm CMOS process technology, the developed 8-bit Successive Approximation Register(SAR) ADC integrates key components, including a preamplifier, comparator, and a digital-to-analog converter(DAC), to optimize signal processing and ensure accurate data conversion from analog to digital formats. The ADC architecture is evaluated for its ability to achieve a substantial sampling rate of 10 …

Digital Strategies And Non-Conventional Sources Of Innovation: Analysis Of Causal Relationships Using Interpretive Structural Modeling, Ines M. Ferinha, Fernando A. F. Ferreira, Neuza C. M. Q. F. Ferreira, Edwin Garces, Tugrul Daim

Engineering and Technology Management Faculty Publications and Presentations

Digitalization appears to have sped up in recent years, and many companies have seen their business models changed irreversibly. In this context, small and medium-sized enterprises (SMEs) should adopt different business approaches that help these firms thrive and maintain and/or create sustainable competitive advantages. SMEs’ specificities can present obstacles to this adaptation process, yet these challenges may turn out to be the greatest allies of these companies if they stimulate swift, quick transformations. This study sought to develop an analysis system that identifies appropriate digital strategies and non-conventional sources of innovation, which can thus promote sustainable SME innovation. To achieve …

Amorphous Sio2-Stabilized High-Valent Iron-Oxo Complexes Derived From Fe- And Si-Rich Solid Wastes For Efficient Tetracycline Hydrochloride Degradation, Cuirong Yan, Hongyan Ma, Xiunan Cai, Zhongqiu Luo, Jinyu Shi, Wenhao Li, Xintao Zhou

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High-valent iron-oxo complexes show promise as green oxidants for water remediation but suffer from critical limitations in stability and pH adaptability. Herein, we report a facile method to synthesize amorphous SiO₂-stabilized high-valent iron-oxo complexes via Na⁺ diffusion activation of iron/silicon-rich copper smelting slag. In the complex, the synergistic coexistence of two distinct silica‑oxygen tetrahedral configurations-basic Na₂SiO₃ and acidic SiO2 oxides establishes a self-regulating pH buffering system that stabilizes solution neutrality. This unique structural design ensures sustained oxidative activity of the complex, representing a significant advancement over conventional silica-supported catalysts due to its intrinsic acid-base …

Interfacial Shear Transfer Between Steel H-Piles And Concrete Encased In Cfrp, Mohanad M. Abdulazeez, Binod Shrestha, Mohamed A. Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Numerous in-service steel H-piles, a common structural element in the bridge industry, suffer severe corrosion. One of the adopted solutions is to use concrete jackets to encase the corroded sections. Therefore, interfacial shear strength between the uncorroded section and the jacket is crucial. This paper presents an experimental investigation of the interfacial shear stresses of 18 full-scale H-piles encased in concrete jackets and subjected to push-out static testing. The concrete jackets are confined using different carbon fiber-reinforced polymer (CFRP) confinement ratios. Different cross-sectional areas and distributions of shear studs are investigated. The average and maximum bond stresses are evaluated and …

Price Adjustment Clauses: Enhanced Price Volatility Forecasting For Construction Materials, Ahmed Shiha, Mariam Elazhary, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Price adjustment clauses (PACs) are used by state departments of transportation (DOTs) to share the risk of material price fluctuations. Existing models that depict the price fluctuations of materials forecast a mean within a horizon while relying on the assumption of a constant volatility throughout that horizon. However, none of them examine whether the prices of construction material exhibit similar volatility following a sudden price surge or a price drop. The prospect of PACs and their associated trigger values is hindered in the absence of empirical assessments of their capacity to capture the volatilities in material prices. This paper fills …

Proceedings Of The 33rd United States – Japan Bridge Engineering Workshop, David Y. Yang

Civil and Environmental Engineering Faculty Publications and Presentations

This report summarizes the 33rd United States–Japan Bridge Engineering Workshop, an event that convenes bridge engineers from both countries. The workshop serves as a platform to exchange innovative ideas and technologies, as well as to share crucial knowledge and lessons learned, all with the aim of advancing bridge engineering. The 33rd workshop specifically addressed transportation asset management and seismic retrofitting, two subjects of increasing importance to both the United States and Japan. The report details the workshop's discussions on topics relevant to bridge engineers.

Understanding The Relationship Between Structural Failure And Fatalities In Tornadoes: A Quantitative Investigation Of The 2021 Midwest Tornado Outbreak, Yi Zhao, Ruwen Qin, John W. Van De Lindt, Justin Sharpe, Grace Yan

Engineering Management and Systems Engineering Faculty Research & Creative Works

During 1950-2011, the number of fatalities caused by tornadoes in the U.S. significantly exceeded the fatalities caused by both hurricanes and earthquakes. To reduce tornado induced fatalities, it is essential to understand how structures/building failures correlate with fatalities and who are more vulnerable to tornadoes. Insights from this study are intended to help provide information to decision-makers on where to allocate limited resources for enhancing tornado resilience. By examining both the fatality data and structural damage data in the 2021 Midwest Tornado Outbreak, the objective of this study is to examine the occurrence of fatalities during tornadoes across various types …

Identification Of Flow Regime In A Co-Current Upflow Packed Bed Reactor (U-Pbr) Using Gamma-Ray Densitometry (Grd), Youssef Yatimi, Ahmed Alalou, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Owing to their significant impact on the reaction rate, the comprehensive understanding of the hydrodynamics in any novel design of the Upflow Packed Bed Reactor (U-PBR) is essential for the optimization of its throughput. In this regard, the identification of the flow regime is of paramount importance. Therefore, in this work, we use the photon counts time-series data obtained using the non-invasive Gamma-ray densitometry (GRD) to identify, for the first time, the flow regimes and their transition velocities at two axial locations (Z/D=0.8,1.56) and five radial locations (r/R=0,±0.5,±0.9) within the packed catalysts' bed of U-PBR with a novel plenum design …

Synergetic Adsorptive Mechanisms, Reusability And Cost Evaluations Of Green Fabricated Hybrid Barium Cobalt Nanocomposites For Methylene Blue And Lead Removal From Wastewater, Titus Chinedu Egbosiuba, Chibuike Christogonus Njoku, Ijeoma Jacinta Ani, Godwin Ifeanyi Ogbuehi, Abdulkareem Omeiza Yusuf, Abiodun Azeez Saka, Ugochukwu Ewuzie, Ebuka Emmanuel Ezennajiego, Blessing Onyinye Okafor, Walter Chibuike Anene, Cecilia Chika Unegbu, Florence Acha, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Barium nanoparticles (BaNPs), cobalt nanoparticles (CoNPs), and hybrid barium-cobalt nanocomposites (BaCoNCs) were synthesized using an eco-friendly green technique with Anacardium occidentale leaf extract for sequestration of methylene blue (MB) dye and lead (Pb (II)) ions from industrial wastewater. The nanoparticles and nanocomposites were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), high-resolution scanning electron microscopy (HRSEM), and Brunauer-Emmett-Teller (BET) analysis to assess their functional groups, crystalline structure, morphology, and surface properties, confirming successful synthesis. Batch adsorption studies showed that optimal pollutant removal occurred at pH values of 8 for MB and 5 for Pb(II), with a contact time …

Systematic Hazard Analysis Of Flare System Nodes In Chemical Process Safety, Hayder A. Alhameedi, Athmar A. Alzubaidi, Joseph D. Smith, Doug Allen, Saud Aldawood, Paul Ani

Chemical and Biochemical Engineering Faculty Research & Creative Works

Multidimensional consequences may arise from an accident in the flare system of any chemical or petrochemical plant due to the improperly managed flare system, which can lead to the presence of the toxic and flammable gases. The Hazard and Operability Study (HAZOP) is a systematic method used to assess and identify risks that can occur during operation, ensuring risk reduction and the safety of using equipment or units. This study aims to apply the HAZOP technique to identify the hazards associated with the gas flaring process in an air-assisted flare. The air-assisted flare system was subdivided into four sections (nodes), …

Preliminary Investigation Of The Potential Health Risks Of Non-Formfitting Body Armor With A Focus On Female Warfighters, Melissa Sutter, Catherine E. Johnson

Mining Engineering Faculty Research & Creative Works

Introduction Body armor is an important piece of protective equipment for warfighters in battlefield environments. With more women now filling military roles, body armor designs may need to be further refined to accommodate the female anatomy instead of the male-based unisex designs. Unisex designs have been found to have negative effects on female warfighter performance, resulting in discomfort, breathing difficulty, and air gaps forming between the armor and torso. This study aimed to investigate increased injury risk because of air gaps from shock wave exposure on warfighters wearing nonform-fitting armor and the influence of material properties. Based on literature, lowered …

Large Language Models For Construction Risk Classification: A Comparative Study, Abdolmajid Erfani, Hussein Khanjar

Michigan Tech Publications

Risk identification is a critical concern in the construction industry. In recent years, there has been a growing trend of applying artificial intelligence (AI) tools to detect risks from unstructured data sources such as news articles, social media, contracts, and financial reports. The rapid advancement of large language models (LLMs) in text analysis, summarization, and generation offers promising opportunities to improve construction risk identification. This study conducts a comprehensive benchmarking of natural language processing (NLP) and LLM techniques for automating the classification of risk items into a generic risk category. Twelve model configurations are evaluated, ranging from classical NLP pipelines …

Incorporation Of E-Waste Plastics Into Asphalt: A Review Of The Materials, Methods, And Impacts, Sepehr Mohammadi, Dongzhao Jin, Zhongda Liu, Zhanping You

Michigan Tech Publications

This paper presents a comprehensive review of the environmentally friendly management and reutilization of electronic waste (e-waste) plastics in flexible pavement construction. The discussion begins with an overview of e-waste management challenges and outlines key recycling approaches for converting plastic waste into asphalt-compatible materials. This review then discusses the types of e-waste plastics used for asphalt modification, their incorporation methods, and compatibility challenges. Physical and chemical treatment techniques, including the use of free radical initiators, are then explored for improving dispersion and performance. Additionally, in situations where advanced pretreatment methods are not applicable due to cost, safety, or technical constraints, …

Comprehensive Review Of In Vitro Approaches For Environmental Heavy Metal Exposure, Manas Warke, Madeline English, Camila Padilla, Lexie Gasco, Wendy Leisner, Rupali Datta, Smitha Rao

Michigan Tech Publications

Heavy metals are ubiquitous environmental pollutants, contaminating air, soil, and water via the erosion of natural deposits, as well as originating from anthropogenic sources, such as agriculture, industries, transportation, and landfills. The increasing utilization of heavy metals over the years, combined with the persistent nature of metals in the environment poses a direct threat to human and environment health. Although regulatory limits have been established for toxic metals, assessing the associated health risks using real-life exposure scenarios remains challenging. In this review, we summarize the development and use of in vitro models based two- and three-dimensional cell culture systems, focusing …

Data-Driven Shear Capacity Prediction Of Studs Embedded In Uhpc For Steel-Uhpc Composite Structures, Yanping Zhu, Woubishet Zewdu Taffese, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study employs ensemble learning algorithms to accurately predict the shear capacity of studs embedded in ultrahigh performance concrete (UHPC), a critical aspect of structural engineering. Using a comprehensive data set featuring six UHPC slab features, seven stud features, and one shear pocket feature, 35 ensemble models are developed across five cases and seven algorithms (bagging, random forest, AdaBoost, gradient boosting, XGBoost, CatBoost, and LightGBM). The Shapley additive explanations (SHAP) analysis is conducted on the top-performing models to gain insights into their decision-making mechanisms. Results indicate that transforming UHPC slab geometry parameters into a volume, alongside different diameter ratios, proves …