Engineering Commons^™

Plasma Electrolytic Oxidation Of Titanium Under Constant Applied Voltage, Joshua Paul Twaddle

Material Science and Engineering Theses - Archive

Plasma Electrolytic Oxidation (PEO) is a method capable of applying nonmetallic coatings to metallic substrates submerged in electrolyte via a plasma development under high voltage. The PEO technique is particularly useful in the coating of materials such as Ti-, Al-, and Mg-based alloys. In this study, the effects of varying processing voltage and time on oxide coating characteristics formed on pure titanium surfaces was investigated. First, it was necessary to prove that the selected electrolyte type and concentration could produce PEO coatings in a predictable fashion. Experiments were performed with constant current density by constantly controlling the voltage, so the …

Single Step Fabrication Of Shape Morphing 3d Surfaces, Amirali Nojoomi

Material Science and Engineering Dissertations - Archive

Shape-changing materials that can adopt programmable 3-dimensional (3D) shapes offer promise for a wide range of applications. Form the formation of the leaves and flowers to the shaping of complex organs, the analogues of such shape-morphing 3D surfaces are abundant in nature. However, since the formation of such surfaces in biological systems is fundamentally different from that of human-made materials, replicating their complex morphologies, movements, and thereby functions remains a challenge. Inspired by living organisms, we introduce an approach, called digital light 4D printing (DL4P), that encodes thermosensitive 2D hydrogels with a specific pattern of network density and thus temperature-induced …

Monolithic Chalcogenide Optical Nanocomposites Enable Infrared System Innovation: Gradient Refractive Index Optics, Myungkoo Kang, Laura Sisken, Charmayne Lonergan, Andrew Buff, Anupama Yadav, Claudia Goncalves, Cesar Blanco, Peter Wachtel, J. David Musgraves, Alexej V. Pogrebnyakov, Erwan Baleine, Clara Rivero-Baleine, Theresa S. Mayer, Carlo G. Pantano, Kathleen A. Richardson

Materials Science and Engineering Faculty Research & Creative Works

The size and weight of conventional imaging systems is defined by costly non-planar lenses and the complex lens assemblies required to minimize optical aberrations. The ability to engineer gradient refractive index (GRIN) optics has the potential to overcome constraints of traditional homogeneous lenses by reducing the number of components in optical systems. Here, an innovative strategy to realize this goal based on monolithic GRIN media created in Ge-As-Se-Pb chalcogenide infrared nanocomposites is presented. A gradient heat treatment to spatially modulate the volume fraction of high refractive index Pb-rich nanocrystals within a glass matrix is utilized, providing a GRIN profile while …

Characterization Of Mechanical, Thermodynamic And Surface Properties Of The Butterfly Proboscis, Tatiana Stepanova

All Theses

The butterfly proboscis is a fascinating fiber designed to probe and transport fluids. The built-in sensors and actuators make this fiber multifunctional. The proboscis consists of 2 hollow C-shaped tubes that are united when the butterfly comes out of the pupa. A single galea consists of a solid cuticular wall, muscles, nerves, and tracheae. The proboscis cuticular wall is mainly composed of polymers and small amounts of metals and non-metals. The proboscis is a porous material, and its water content is high, up to 50%. When the butterfly is not hungry, its proboscis is tightly coiled; when the butterfly is …

Additive Manufacturing And How 3d Printing Is Fighting Covid-19, Raghavan Srinivasan, Ahsan Mian, Joy Gockel, Laura M. Luehrmann

Mechanical and Materials Engineering Faculty Publications

This is the fourth installment in the Shelter in Place (SiP) Lecture series. This installment covers the creative ways that 3D printing has supported efforts to combat the pandemic. It covers the basics of what 3D printing is, some of the various creative projects that have used 3D printing to combat the pandemic, among other topics and questions by the pandemic.

Thiol-Induced Degradation Of Hydrogels Utilizing Multiresponsive Dithiomaleimides Crosslinkers, Kundu Thapa

Honors Theses

Hydrogels are hydrophilic, three-dimensional materials used as platforms for various biomedical applications such as drug delivery, biosensors, or as scaffolds in tissue engineering. The ability to degrade on demand in response to biological cues is particularly attractive whether dealing with microgels or if one aims to release an active ingredient from a scaffolding material. For instance, many cancer-remediation drug delivery platforms leverage the high concentration of glutathione, a thiol-containing tripeptide, found in cancerous cells. In this work, poly(ethylene glycol) acrylate hydrogels were fabricated using dithiomaleimide (DTM) moieties. DTMs are known to undergo thiol-exchange reactions favoring the dissolution of the hydrogel …

Selfsame Epoxide-Amine Microparticle Systems: Investigation Of Crosslink Density, John J. Peyrefitte

Honors Theses

Epoxide-amine matrix materials containing microparticles with the same chemical composition provide a model system to study interphase formation in highly crosslinked epoxide-amine matrix materials. The epoxide monomer was varied between three different monomer systems to study the model system’s relationship with crosslink density. The same amine monomer, cure procedure, and stoichiometric ratio of epoxide and amine groups were used to prepare each type of microparticle and matrix material. The differences in the epoxide monomer structure affected the crosslink density of the unmodified matrix material, which was concluded to influence the effect of microparticle presence on crosslink density. For the unmodified …

Tailoring Photodegradation Rates Of Acetal-Containing Polymer Networks, Michael Sandoz

Honors Theses

In this thesis, we explore the degradation of poly (thioether acetal) thermosets via a photoinduced thiol-catalyzed ß-scission of acetal linkages incorporated as network crosslink junctions. Specifically, a library of bis-allyl acetal-containing monomers derived from para-substituted benzaldehydes was synthesized and formulated into photopolymerizable thiol-ene resins with commercially available thiol monomers. By varying the electron donating or withdrawing nature of the monomer substituent, we explored the impact of substituent effects on the rate of polymer degradation. Furthermore, we compare the results to those expected from a classical Hammett-type relationship of substituent electronic effects. FTIR was employed to track the appearance of the …

Hydrolytic Degradation Study Of Polyphosphazene-Plga Blends, Riley Blumenfield

Honors Scholar Theses

The synthesis and in vitro degradation analysis of thin films of poly[(glycineethylglycinato)₇₅(phenylphenoxy)₂₅phosphazene]
(PNGEG₇₅PhPh₂₅) and poly[(ethylphenylalanato)₂₅(glycine-
ethylglycinato)₇₅phosphazene] (PNEPA₂₅GEG₇₅) blended with poly(lactic-co-glycolic acid) (PLGA) was conducted to determine the blends’ potential for use as scaffolding materials for tissue regeneration applications. The samples were synthesized with glycylglycine ethyl ester (GEG) acting as the primary substituent side group, with cosubstitution by phenylphenol (PhPh) and phenylalanine ethyl ester (EPA) to make the final product [1]. Blends of 25% polyphosphazene, 75% PLGA and 50% polyphosphazene, 50% PLGA were …

Size-Dependent Inhibitory Effects Of Antibiotic Nanocarriers On Filamentation Of E. Coli, Preeyaporn Songkiatisak, Feng Ding, Pavan Kumar Cherukuri, Xiao-Hong Nancy Xu

Chemistry & Biochemistry Faculty Publications

Multidrug membrane transporters exist in both prokaryotic and eukaryotic cells and cause multidrug resistance (MDR), which results in an urgent need for new and more effective therapeutic agents. In this study, we used three different sized antibiotic nanocarriers to study their mode of action and their size-dependent inhibitory effects against Escherichia coli (E. coli). Antibiotic nanocarriers (AgMUNH–Oflx NPs) with 8.6 × 10², 9.4 × 10³ and 6.5 × 10⁵ Oflx molecules per nanoparticle (NP) were prepared by functionalizing Ag NPs (2.4 ± 0.7, 13.0 ± 3.1 and 92.6 ± 4.4 nm) with a monolayer …

Chemical And Electronic Surface Structure Of Chalcopyrite-Based Thin Films For Solar Water Splitting, James C. Carter

UNLV Theses, Dissertations, Professional Papers, and Capstones

In recent years, various thin film solar devices have reached markedly high efficiencies on both the laboratory and large area scale. To further evaluate their potential, and help drive device optimization of efficient solar devices, a detailed understanding of the chemical and electronic structure of the surfaces and interfaces is required. It is these interfaces that play a pivotal role in dictating aspects of device performance. Chalcopyrite-based materials, such as Cu(In,Ga)S2 (CIGS) are regarded as one of the most promising absorber materials for use in highly efficient solar devices. In the context of photoelectrochemical (PEC) hydrogen generation, the tunability of …

Synthesis Of Nickel-Titanium Intermetallic Surface Coatings Via Electrolytic Plasma Processing, Brody Allen Moore

Material Science and Engineering Theses - Archive

Electrolytic plasma processing (EPP) is an environmentally friendly surface cleaning and deposition technique. Dependant on circuit polarity, anionic or cationic species can be deposited from an aqueous electrolyte bridge, resulting in characteristic nanograin surface morphology and very high deposition rates. This work was conducted to study the EPP process, develop optimal parameters for the synthesis of very hard surface coatings, and study the resultant physical and electrochemical properties of produced titanium-nickel intermetallic surfaces. This study focuses on Ni deposited onto pure Ti surfaces for improvement of surface wear, hardness, and corrosion properties while retaining uncompromised Ti bulk characteristics. The surface …

Materials-Processing Relationships For Metal Fused Filament Fabrication Of Ti-6al-4v Alloy., Paramjot Singh

Electronic Theses and Dissertations

Additive manufacturing (AM) is at the mainstream to cater the needs for rapid tooling and small-scale part production. The metal AM of complex geometries is widely accepted and promoted in the industry. While several metal AM technologies exist and are matured to a level where expectation in terms of design and properties are possible to realize. But the metal AM suffers from the heavy expense to acquire equipment, isotropic property challenges, and potential hazards to work with loose reactive metal powder. With this motivation, the dissertation aims to develop the fundamental aspects to print metal parts with bound Ti-6Al-4V powder …

Selective Laser Melting 17-4 Ph Stainless Steel And The Effect Of Varied Thermal Treatments On Fatigue Behavior., Sean Daniel Dobson

Electronic Theses and Dissertations

Fatigue failure is the leading source of loss in industry. In order for new means of manufacturing to move towards mainstream use a complete understanding of material and mechanical behavior must be gained. This endeavor seeks to aide in that task by observing the fatigue behavior of selective laser melting (SLM) additive manufacturing (AM) specimens and the effect of differing thermal treatment conditions for an optimized AM process. Stainless steel 17-4 PH specimens were fabricated using SLM AM and thermally treated to three conditions: as-built, solutionized and hardened, and direct hardened. These specimens were characterized for material (powder quality, density, …

Discontinuous Grain Boundaries Of Forged René 41, Aaron Rabin, Bryce Bitter

Materials Engineering

Certain nickel-based alloys, particularly René 41, characteristically have many low-angle grain boundaries (grain arrangements of less than 15 degrees), present in the microstructure of an in-use component. Frequently, these low-angle grain boundaries are not optically visible after the etching process, leading to the phenomena of discontinuous grain boundaries. There exists a risk for René 41 grain boundary characterization; since one cannot assume that a grain boundary continues beyond a discontinuity, the grain size requirements become difficult to meet. Despite favorable characteristics of René 41, such as the corrosion and oxidation resistance coupled with excellent strength at high temperatures, the risks …

Sub-/Surface Evaluation Of Industry-Grade Endodontic File Micro-/Nanoscale Structures And Low-Cost, Low-Energy Methods Of Rapidly Annealing And Nitriding Titanium, Nicholas Broadbent

Mechanical Engineering Undergraduate Honors Theses

Because of their unique mechanical properties, shape memory capabilities and biocompatibility, Nickel-titanium alloys are frequently used in the medical industry for a variety of applications including endodontic files. Until now, the performance of industry-standard endodontic files has been characterized by this alloying property and a limited set of macroscale surface structures and features. In this work, High Resolution Transmission Electron Microscopy (HRTEM), Low Resolution Transmission Electron Microscopy (LRTEM), Scanning Electron Microscopy (SEM), and Energy Dispersive X-Ray Spectroscopy (EDX) analyses are conducted at both the surface and sub-surface levels of a wide selection of industry-grade endodontic files currently offered on the …

An All-Optical Excitonic Switch Templated On A Dna Scaffold Operated In The Liquid And Solid Phases, Donald L. Kellis

Boise State University Theses and Dissertations

The natural excitonic circuitry of photosynthetic organisms, including light harvesting antennas, provides a distinctive example of a highly attractive bio-inspired alternative to electronic circuits. Excitonics, which capitalizes on spatially arranged optically active molecules ability to capture and transfer light energy below the diffraction limit of light has garnered recognition as a potential disruptive replacement for electronic circuits. However, assembly of optically active molecules to construct even simple excitonic devices has been impeded by the limited maturity of suitable molecular scale assembly technologies.

An example of nanophotonic circuitry, natural light harvesting antennas employ proteins as scaffolds to organize and self-assemble light-active …

Diffusion Bonding Of Inconel 600 To Silicon Carbide For Next Generation High Temperature Applications, Yaiza Rodriguez Ortego

Boise State University Theses and Dissertations

Ceramic to metal interfaces are of interest for applications in extreme environments because they allow increased operational temperatures, resulting in greater thermodynamic efficiency in energy conversion processes. Ceramics offer high temperature corrosion resistance while metals offer robust and versatile solutions to assemblies. Understanding the solid-state reactions, the resulting interfacial microstructure, and the properties of the joints produced by diffusion bonding is essential for developing reliable ceramic to metal interfaces.

The combination of silicon carbide (SiC) and a nickel-based alloy (Inconel 600) offers improved strength and resistance to high temperature degradation. This work focuses on the understanding of the solid-state diffusion …

Empirical Modeling Of Structural Distortions In Perovskite Ceramics, Evan Connor Smith

Boise State University Theses and Dissertations

Predictive models for composition-structure-property relationships are essential to realizing the full potential of electroceramic materials; however, the electroceramics industry has largely failed to invest in predictive models in favor of simple rules of thumb or expensive, time-consuming trial-and-error methods. Empirically derived predictive models have the potential to significantly improve and guide future research in a more cost-effective and timely manner. It may even be possible to predict some intrinsic properties (e.g., polarization) on the order of a unit cell using only the charge and size of each chemical component. Scientists and researchers may ultimately be able to use …

Investigation On The Morphology Of Charge-Transfer Complexes In Low Density Polyethylene, Wade Korf

Master's Theses

Fillers are used ubiquitously throughout the fields of polymer and material science to overcome many inherent limitations to polymeric materials (i.e. poor stiffness or strength) and to expand their potential applications. There is a need to develop controllable particle architectures to better understand fundamental structure-property relationships in particle reinforced polymer composites. Charge-transfer complexes (CTCs) can assemble in situ into various needle and dendritic shapes via simple fabrication processes and at low loading levels. In this study, the effect of tetrathiafulvalene (TTF) and 7,7,8,8-tetracyanoquinodimethane (TCNQ) CTC crystallites of various shapes and sizes on composite mechanical properties was investigated in an LDPE …

Effects Of Polytetrafluoroethylenemicro–Particles On Mechanical Andtribological Properties Of Glass Fiberreinforced Polyoxymethylene, Kunnan Singh Jasbir Singh

Student Works (2020-2029)

Reinforcing polyoxymethylene (POM) with glass fibers (GF) enhances its mechanical properties, but at the expense of tribological performance. Formation of a transfer film to facilitate tribo–contact is compromised due to the abrasiveness of GF. As a solid lubricant, for example, polytetrafluoroethylene (PTFE) significantly improves friction and wear resistance. The effects of chemically etched PTFE micro–particles on the fiber– matrix interface of POM/GF/PTFE composites have not been systematically characterized. This research investigated the effects of PTFE micro–particles on mechanical and tribological properties of POM/GF/PTFE composites. Since PTFE is immiscible with most polymers, the surface was etched using sodium naphthalene salt dissolved …

Pollution Prevention Via Recovery Of Cerium (Iv) Oxide In Optics Company, Eugene Park, William Gallagher, Sydor Optics, Flint Creek Resources

Articles

Pollution prevention methods were applied at an optics manufacturer in an effort to improve recovery of a valuable polishing component, cerium oxide (ceria), 77% of which was lost to dragout and sewer discharge. Centrifugation and microfiltratiion were evaluated to develop a process that would increase recovery of used ceria, which would then be sent back to the ceria supplier for reclamation and reuse. Full-scale implementation included a high-speed centrifuge that operates continuously with a microfiltration system through recirculation in a single process tank. Sydor Optics has improved ceria recovery from 23% to 48%, saving thousands of dollars annually.

Co-Assembly Behavior Of Neutral And Zwitterionic Amphiphilic Block Copolymers In The Fabrication Of Glassy Polymer Vesicles, Elina Ghimire

Honors Theses

Polymersomes, also known as polymer vesicles, are hollow capsules fabricated through the solution assembly of amphiphilic block copolymers. Polymer vesicles have garnered a great deal of interest in materials science because of their potential application in areas such as drug delivery, diagnostics and imaging, gene therapy, and as nanoreactors. The goal of this project is to understand the factors that affect the arrangement of triblocks in vesicle membrane via the study of the co-assembly behavior of linear amphiphilic triblocks with different hydrophilic blocks. We investigated the self- and co-assembly behavior of amphiphilic triblock copolymers with neutral hydrophilic blocks. Moreover, we …

In-Service Performance Evaluation Of Concrete Sloped End Treatments In Iowa, Jessica Lingenfelter

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Sloped end treatments were historically developed as low-cost, low-maintenance end treatments for rigid features like concrete barriers and bridge rails. Crash testing indicated that sloped end treatments are associated with significant instability for impacting vehicles. However, the in-service performance of these features has not been evaluated. An in-service performance evaluation (ISPE) was performed to evaluate vehicle crashes with sloped end treatments in Iowa between 2008 and 2017. Researchers generated a geographic inventory of sloped end treatment locations, reviewed crash narratives and scene diagrams for crashes near these sloped end treatments, and calculated an estimated crash rate and crash cost for …

Structure And Deformation Of Carbyne Deposited On A Nickel Substrate, Abigail Eaton

Mechanical Engineering Undergraduate Honors Theses

Carbyne is a nanomaterial of great interest due to its ability to withstand high forces similarly to other carbon allotropes such as graphene or carbon nanotubes. However, it is currently difficult to synthesize and maintain without the assistance of a composite material substrate that the carbyne can be integrated with, which will affect its reaction to varying conditions. This thesis focuses on studying the effects of carbyne on a nickel surface and its mechanical properties to predict its future usages and potential for applications in varying fields. We perform a three-point bending test simulation using molecular dynamics with pure Ni …

Enhancement Of Phase Change Material Sorbitol By Nanoparticle Inclusion For Improving Thermal Energy Storage Capabilities, Joshua Kasitz

Mechanical Engineering Undergraduate Honors Theses

Thermal management of electronic devices has become an increasingly vital field of study with the rapid miniaturization of many key electrical components. With the significant improvement of semiconductor manufacturing and intensified focus on interconnects, electronic devices have decreased in size at an incredible rate. Decreasing spatial requirements is essential to improving device capabilities as the electronic system is able to incorporate more components. Currently, electronic systems are drastically limited by the capabilities of their cooling mechanisms. Smaller devices lead to large increases in the energy density of the system and require more powerful cooling systems to maintain proper component operating …

Peptoid And Antibody-Based Gfp Sensors, Solomon Isu

Graduate Theses and Dissertations

In this work, we have made and characterized a pair of immunobiosensors for detecting the green fluorescent protein (GFP) in an aqueous matrix. An anti-GFP antibody-based biosensor was assembled to detect GFP, while a novel peptoid (N-substituted oligomers of glycine designated as IOS-1) biosensor was also assembled for GFP detection. A quartz crystal microbalance (QCM) gold sensor was used as the supporting substrate for self-assembly of the immunobiosensors. Gravimetric measurements of the QCM gold sensor during immunobiosensor construction and operation were available in real-time using a QCM instrument. X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and Fluorescence microscopy were used …

Spherical Cavity Expansion Approach For The Study Of Rigid-Penetrator’S Impact Problems, Mario Buchely, Alejandro Marañon

Materials Science and Engineering Faculty Research & Creative Works

In recent years, Spherical Cavity Expansion (SCE) theory has been extensively utilized to model dynamic deformation processes related to indentation and penetration problems in many fields. In this review, the SCE theory is introduced by explaining the different mathematical features of this theory, its solution, and a potential application to model the penetration of a rigid penetrator into a deformable target. First, a chronologically literature review of the most common models used to study this kind of penetration problems is introduced, focusing on the SCE theory. Then, the engineering model of penetration is presented using the SCE approach. The model …

Antibacterial And Anticancer Activity Of Hydrothermally-Synthesized Zinc Oxide Nanomaterials Using Natural Extracts Of Neem, Pepper And Turmeric As Solvent Media, C. Abinaya, R. Manjula Devi, P. Suresh, N. Balasubramanian, N. Muthaiya, N. D. Kannan, J. Annaraj, V. Shanmugaiah, Joshua Pearce, P. Shanmugapriya, J. Mayandi

Michigan Tech Publications, Part 1

A novel and simple wet chemical hydrothermal synthesis method was employed in the preparation of zinc oxide (ZnO) nanoparticles using neem (N), pepper (P) and turmeric (T) extracts as solvent media. The structural and optical properties as well as the antibacterial and anticancer properties of all the samples (ZnO, N/ZnO, P/ZnO, T/ZnO and NPT/ZnO) were characterized and analyzed. Solvent media was found to have an effect on both the size and the morphology of the nanoparticles, which in turn effected their optical and cytotoxic properties. The colony forming unit (CFU) assays were done for E. coli, S. aureus and S. …

Development Of A Novel Vehicle Guidance System: Vehicle Risk Mitigation And Control, Michael Sweigard

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Over a half of fatal vehicular crashes occur due to vehicles leaving their designated travel lane and entering other lanes or leaving the roadway. Lane departure accidents also result in billions of dollars in cost to society. Recent vehicle technology research into driver assistance and vehicle autonomy has developed to assume various driving tasks. However, these systems are do not work for all roads and travel conditions. The purpose of this research study was to begin the development a novel vehicle guidance approach, specifically studying how the vehicle interacts with the system to detect departures and control the vehicle

A …