Other Mechanical Engineering Commons^™

Scalability Study Of Explicit Finite Element Method On Shared And Distributed Memory Architectures, Leonardo Orea-Amador, Jack F. Chessa Ph.D.

COURI Symposium Abstracts, Summer 2012

Parallel architectures in computer systems are powerful tools for processing enormous amounts of information. The results of this research will illustrate their optimal usage by evaluating the scalability of the code Abaqus in the cases of domain decomposition and loop parallelization architectures. The scalability was analyzed using concomitant variation having the DoF (Degrees of Freedom) and CPU (Central Processing Unit) numbers as the variables. Abaqus jobs with less than 100,000 DoF showed similar scalability than that of jobs with more than 500,000. These results contradict the original hypothesis which proposed that small jobs would show poor scalability and vice versa. …

Development Of A Pyrotechnic Shock Simulation Apparatus For Spacecraft Applications, Joseph Binder, Matthew Mccarty, Chris Rasmussen

Aerospace Engineering

This report details the research, design, construction, and testing of a pyrotechnic shock simulation apparatus for spacecraft applications. The apparatus was developed to be used in the Space Environments Lab at California Polytechnic State University. It will be used for testing spacecraft components with dimensions up to 24”x12”x12” as well as CubeSats. Additionally, it may be used as an instructional or demonstrational tool in the Aerospace Department’s space environments course. The apparatus functions by way of mechanical impact of an approximately 20 lb stainless steel swinging hammer. Tests were performed to verify the simulator’s functionality. Suggestions for improvement and further …

Pier Portal, Andrew Belis, Andrew (Andy) Crafts, Jeremy Depangher, Aaron Hein, Michael Machado, Aaron Poulos

Computer Engineering

This project constitutes the design, build, and test of a camera system that runs on a track along the length of a pier piling at the Cal Poly pier in Avila Beach. The goal of the camera system is to observe the abundant sea life active on the surface of the piling underwater and in the tidal zone. The camera system will stream live video to the internet, record HD video, and be controllable remotely. The track is mounted to the piling with brackets and extends from the sea floor to a few feet above the pier deck. The camera, …

Robotic Fingerspelling Hand For Deaf-Blind Communication, Brian Fang, Colby Dixon, Trevor Wong

Mechanical Engineering

Robotic fingerspelling hand for the deaf-blind. The hand forms the shapes of the American Manual Alphabet with 11 servos. The project was sponsored by The Smith-Kettlewell Eye Reaserch Institute.

Mini Pump, Stephen Scruggs, Britta Berg-Johansen, Kyle Kriete

Mechanical Engineering

No abstract provided.

Innovative Cargo Rack Solutions, Travis Mccart, Brian Blummer, Whit Ratcliff

Mechanical Engineering

This report describes the process of designing, building, and testing a lowering mechanism for a roof-mounted SUV cargo box. It provides a detailed problem description and a specific list of requirements that our design must comply with. Existing products and concepts are presented which meet one or more of our design requirements. Six design concepts are discussed and down-selected to three for further development. A final design has been chosen and described in detail. A team management plan is included to specify member responsibilities and a schedule details major deadlines and goals. Manufacturing processes and testing procedures are described in …

Formula Hybrid Drivetrain Design, Zachary (Zak) Mcfarland, Alex Pruitt, William Domhart

Mechanical Engineering

The Formula Hybrid senior project group was tasked with designing and building a drivetrain system for the Cal Poly Society of Automotive Engineers (SAE) Formula Hybrid (FHSAE) team. FHSAE gave customer requirements for performance and geometry for the drivetrain and the FHSAE rulebook has guidelines regarding safety requirements. The team chose to compete in the electric category of the 2012 FHSAE competition. After getting feedback from previous car performance and researching different powertrain options, the senior project team arrived at three conceptual ideas. Using a quality function deployment method, the senior project team chose the concept where two motors independently …

Throwing Frame For Athletes With Dissabilities, Andrew Higgins, Stefan Owechko, Gabriel (Gabe) Terrasas, Kevin Crisfield

Mechanical Engineering

Team Zeus’ senior project was to design, build and test a working throwing frame system for Bridge II Sports, a nonprofit organization in North Carolina. The throwing frame is used to allow athletes and individuals with disabilities to throw shot-put, discus, and javelin using a frame to sit against. Team Zeus was specifically tasked to build a frame that is lighter weight and more transportable than products that are currently on the market. This frame also is adjustable to accommodate a wide range of athlete weights, sizes, and abilities. The final result is a 35lb aluminum frame with two different …

Thermocouple Calibration Device, Angelica M. Larios, Cameron D. Peck, Andrew J. Smith

Mechanical Engineering

The goal of this project is to develop a thermocouple calibration unit with a high degree of confidence and accuracy. This thermocouple calibration device will be designed and developed at Cal Poly San Luis Obispo and delivered to Tesla Motors Inc.

To best utilize thermocouples, they must be calibrated to a known accuracy. Non-commercially produced thermocouples have unknown accuracies. The final deliverable will be a semi-automated device that produces a calibration curve for each thermocouple with a known confidence and accuracy.

Aerodynamic Test Platform For Human Powered Vehicle (Hpv), Spencer Wangerin, Spencer Lillywhite, Colburn Davis

Mechanical Engineering

The Aerodynamic Test Platform (ATP) for the Cal Poly HPV Club is a system that was designed by Cal Poly mechanical engineering students to measure aerodynamic characteristics of a human-powered vehicle (HPV). The HPV team desired a system that could quantify the lift, drag, and other aerodynamic qualities of a full scale HPV at various orientations in oncoming airflow. Established methods for determining aerodynamic characteristics include computational fluid dynamics (CFD) and wind tunnel testing of scaled models. The ATP was devised to simulate the test results given by a full-scale wind tunnel without requiring a wind tunnel large enough to …

Supermileage Chassis Dynamometer, Jose Garcia, Steve Janning, Timothy Lui, Kyla Purvis

Mechanical Engineering

This report describes the final design and analysis of a hydraulic chassis dynamometer as a testing tool for California Polytechnic State University, San Luis Obispo Supermileage Vehicle Team (CPSMV). Literature review was conducted to understand the various types of chassis dynamometers on the market as of the year 2011. After rigorous research, it was determined that a hydraulic system was the best system for a chassis dynamometer in terms of functionality, performance, and cost. Critical study of hydraulics, dynamometers, and data acquisition systems (DAQ) was followed by a complete design of a hydraulic system. The chassis dynamometer proposed in this …

Main Reduction Gear Debris Identification And Removal Device, Gordon Cline, Alex Tittiger, Michael O'Brien

Mechanical Engineering

This report details the development of a tool to remove objects and debris from a large gearbox found on ships of the United States Navy, specifically to be used by NAVSEA. The tool is to be used in situations where an object or contaminant cannot easily be removed or found without completely disassembling the gearbox. This will be done using a boom arm, a cable, a gripper and a borescope. This combination will allow for a large amount of mobility and versatility when searching for the object or contaminant, which is necessary for use in different gearboxes. The process we …

Design Of A Releasable Snowboard Binding, Rex Crossen, Brian Kruse, Timothy Scott

Mechanical Engineering

A releasable snowboard binding will be proposed to our sponsor. This binding will allow the user to release and engage on demand for aerial tricks, comfort, and increased safety. The releasable snowboard binding we will come up with will be revolutionary within the snowboard industry and make current bindings old and inferior.

Human Powered Generation - Seesaw: A Dc House Project, William Varsh, Jeffrey Healy

Electrical Engineering

This project is a proof of concept work, where playground equipment is implemented for power generation. In using a seesaw design, this project was able to show how a simple mechanical motion could be transformed in electrical power. A seesaw power generator was designed and constructed to demonstrate its feasibility. Results show that with some modification and improvement to the current design, the seesaw me indeed provide a viable method to produce electricity.

Three-Dimensional Geometry Of The Human Carotid Artery, Alexey Kamenskiy, Jason N. Mactaggart, Iraklis I. Pipinos, Jai Bikhchandani, Yuris A. Dzenis

Department of Mechanical and Materials Engineering: Faculty Publications

Accurate characterization of carotid artery geometry is vital to our understanding of the pathogenesis of atherosclerosis. Three-dimensional computer reconstructions based on medical imaging are now ubiquitous; however, mean carotid artery geometry has not yet been comprehensively characterized. The goal of this work was to build and study such geometry based on data from 16 male patients with severe carotid artery disease. Results of computerized tomography angiography were used to analyze the cross-sectional images implementing a semiautomated segmentation algorithm. Extracted data were used to reconstruct the mean three-dimensional geometry and to determine average values and variability of bifurcation and planarity angles, …

Identification Of A Maximum Guardrail Height For The Midwest Guardrail System Using Computer Simulation, Ramen D. Julin

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

W-beam guardrails are by far the most common restraint system used along both local and major roadways. Traditionally, these restraint systems have been full-scale crash tested with a rail height ranging between 27 in. and 32 in. However, the maximum rail height which allows for safe performance of guardrails, especially in impacts involving small vehicles, has never been identified.

The main concern associated with an increase of the rail height is that small vehicles, because of their low profile, may have a tendency to lift the rail and penetrate the barrier. The objective of this project was to determine the …

Agent-Based Modeling Of Emergency Building Evacuation, Vi Q. Ha

Master's Theses

Panic during emergency building evacuation can cause crowd stampede, resulting in serious injuries and casualties. Agent-based methods have been successfully employed to investigate the collective human behavior during emergency evacuation in cases where the configurational space is extremely simple - usually one rectangular room - but not in evacuations of multi-room or multi-floor buildings. This implies that the effect of the complexity of building architecture on the collective behavior of the agents during evacuation has not been fully investigated. Here, we employ a system of self-moving particles whose motion is governed by the social-force model to investigate the effect of …

Rehabilitation And Exercise Machine, Judith M. Burnfield, Yu Shu, Thad W. Buster, Carl Nelson

Department of Mechanical and Materials Engineering: Faculty Publications

An improved rehabilitation and exercise machine is provided which allows a person with physical limitations, disabilities or chronic conditions to use the machine in order to rehabilitate their muscles, improve joint flexibility, and enhance cardiovascular fitness.

Pore Network Model Construction From Ct Scanned Rock Samples For Carbon Sequestration Simulation, Daniel Llausas^, P. Delgado, Vinod Kumar*

COURI Symposium Abstracts, Spring 2012

No abstract provided.

Model-Based Systems And Methods For Analyzing And Predicting Outcomes Of Vascular Interventions And Reconstructions, Yuris A. Dzenis, Alexey Kamenskiy, Iraklis I. Pipinos, Jason N. Mactaggart

Department of Mechanical and Materials Engineering: Faculty Publications

Systems and methods for analyzing and predicting treatment outcomes of medical procedures such as vascular interventions and reconstructions are disclosed. An illustrative system for analyzing and predicting therapeutic outcomes of medical procedures comprises a relational database configured for classifying and storing patient specific input data for multiple patients, a fluid-solid interaction biomechanical model configured for performing a biomechanics simulation and generating biomechanics data, and a graphical user interface.