Ocean Engineering Commons^™

Harbor Security System, Timothy Jonathan Brown, Matthew Birkebak

Honors Theses and Capstones

Harbors and ports provide the infrastructure for commercial trade and naval facilities. It is vital to ensure the safety of these locations. The Harbor Security System provides an optical ‘gate’ using underwater lasers and photodetectors. This system allows monitoring of both surface and submarine vessels traveling into and out of the harbor. Also, the system provides real time alerts when unauthorized vessels enter the harbor. This project provides a proof of concept for a Harbor Security System to be implemented in Portsmouth Harbor. A scaled model of the detection system was constructed and tested. This detection system is capable of …

Offshore Turbine Arrays: Numerical Modeling And Experimental Validation, Thomas Kroll, William Hall, Ian Gagnon

Honors Theses and Capstones

The interaction between wind turbines in a large wind farm needs to be better understood to reduce array losses and improve energy production. A numerical test bed for an array of offshore wind turbines was developed in the open-source computational fluid dynamics (CFD) framework OpenFOAM. It provides a computational tool which can be used in combination with physical model turbine array studies in the Flow Physics Facility (FPF) at UNH as well as other test facilities.

Turbines were modeled as actuator disks with turbulence sources to reduce computational cost. Both k-ϵ and k-ω SST turbulence models were utilized to capture …

Intelligent Supervisory Switching Control Of An Unmanned Surface Vehicle, Ivan Rodrigues Bertaska

Link Foundation Ocean Engineering and Instrumentation Fellowship Reports

The project originally proposed for this fellowship focused on developing a framework for multimodal control of an unmanned surface vehicle (USV) – transitioning it from an underactuated system to an overactuated one. This would assist in two main functions USVs are typically tasked with: transiting and station-keeping. This project has since expanded to encompass novel territory in control theory, robotics, and computer science. The author is hopeful that the work reported here will assist in the transition of USVs from an academic pursuit into a valuable, pervasive tool for the oceanic sciences and the ocean industry. For the continued expansion …

A Novel In Situ Microscope For Studying Benthic Organisms, Andrew Mullen

Link Foundation Ocean Engineering and Instrumentation Fellowship Reports

Coastal marine ecosystems such as coral reefs, kelp forests, sea grass beds and mangroves have significant societal value. As economic resources they support tourism, fisheries and storm protection while ecologically they host high biological diversity and productivity. Many basic biological, chemical, and physical processes taking place in these marine ecosystems occur at ‘micro-­‐scales’ less than a millimeter in size. Examples of significant micro-­‐scale activities include: coral bleaching of their single-­‐ celled symbiotic algae, larval settlement and attachment, competition between sessile organisms along thin interfaces, and fluxes of particles to and from the seafloor. It is also important to consider that …

The Simulation & Evaluation Of Surge Hazard Using A Response Surface Method In The New York Bight, Michael H. Bredesen

UNF Graduate Theses and Dissertations

Atmospheric features, such as tropical cyclones, act as a driving mechanism for many of the major hazards affecting coastal areas around the world. Accurate and efficient quantification of tropical cyclone surge hazard is essential to the development of resilient coastal communities, particularly given continued sea level trend concerns. Recent major tropical cyclones that have impacted the northeastern portion of the United States have resulted in devastating flooding in New York City, the most densely populated city in the US. As a part of national effort to re-evaluate coastal inundation hazards, the Federal Emergency Management Agency used the Joint Probability Method …

Cruise Ship Preliminary Design: The Influence Of Design Features On Profitability, Justin Epstein

LSU New Orleans Theses and Dissertations

This thesis provides a means to estimate the physical and performance characteristics of a preliminary cruise ship design. The techniques utilized to estimate these characteristics are showcased in the user-friendly interface known as the Cruise Ship Analysis Tool (CSAT). Using the CSAT, the implications that design feature decisions in the preliminary design stage have on a cruise ship’s profitability is analyzed. Then, the most profitable design feature assemblage among a finite number of varying design feature combinations is estimated and compared among cruise ship designs with different passenger carrying capacities. Profitability is analyzed using the measure of merit (MOM) known …

Design Of Gan-Based Low-Loss Y-Branch Power Splitter, Retno Wigajatri Purnamaningsih, Irma Saraswati, Nji Raden Poespawati, Elhadj Dogheche

Makara Journal of Technology

We present a Y-branch power splitter design with a multimode section using GaN on Sapphire at telecommunication wavelength. The GaN sample optical properties were also investigated, resulting in a refractive index for the GaN layers nTE=2.289±0.001 and nTM=2.324±0.00. Optimization of the structure parameters for this structure was conducted accurately using BPM methods. The results demonstrated the possibility of realizing a GaN-based Y-branch power splitter for various applications.

Ultra-Wideband Notched Characteristic Fed By Coplanar Waveguide, Rastanto Hadinegoro, Yuli Kurnia Ningsih, Indra Surjati

Makara Journal of Technology

In this paper, a novel Ultra-Wide Band (UWB) notch patch antenna with co-planar waveguide (CPW) fed is presented. This antenna only used one layer and the patch antenna is constructed on the first layer and back to back with CPW fed and bottom part is ground plane. The width notch is used to achieve the UWB characteristic. The results shown that the impedance bandwidth is 1130 MHz (1.662–2.792 GHz) or about 50.7% for VSWR <2.

Analysis Of Vibration Generated By The Rubbing Of Flat Surfaces, Zahrul Fuadi

Makara Journal of Technology

Among the phenomena that occur as a result of contact between two surfaces is friction sound, in which surface roughness is of great importance. In this study, the parameter of contact stiffness is used to explain the frequency characteristic of vibration generated by the rubbing of flat surfaces under a small load. A 3-disk configuration rubbing method was used, which provides a unique characteristic of the system's frequency response function containing specific information about the rubbing vibrations. It is shown that the peak frequency of the rubbing vibration can be explained by using a two-degrees-of-freedom model incorporating the parameter of …

Endoscopic Application Of A Compact Compound-Eye Camera, Keiichiro Kagawa, Shoji Kawahito

Makara Journal of Technology

A multi-functional compound-eye endoscope enabling multi-spectral imaging and variable field-of-view is presented, which is based on a compact compound-eye camera called TOMBO (thin observation module by bound optics). Narrow-band filters attached to some lenses provide snap-shot multi-band images. Fixed and movable mirrors are introduced to control the field of view, which realizes several observation modes such as three-dimensional shape measurement, wide field-of-view, and close-up observation.

Development Of The Soekarno–Hatta International Airport Rail Link Project Using The Value Engineering Method: Creating Value For Money, Mohammed Ali Berawi, Bambang Susantono, Suyono Dikun, Tommy Ilyas, Herawati Zetha Rahman, Abdur Rohim Boy Berawi, Teuku Yuri Zagloel, Perdana Miraj, Jade Sjafrecia Petroceany

Makara Journal of Technology

Soekarno–Hatta Airport is the main gateway for international flights to Greater Jakarta. Its accessibility depends on the inter-city and Sedyatmo toll roads, which causes congestion in peak hours, leading to uncertainty about travel times. The Soekarno–Hatta International Airport Rail Link (SHIARL) is proposed as an alternative mass transportation project, which is expected to provide accessibility and mobility for people and goods to and from the airport. Previously, the project was unattractive to private investors as it was technically and financially unfeasible. Therefore, this research aims to improve the feasibility of the Soekarno-Hatta International Airport Rail Link (SHIARL) by using a …

The Mechanical And Tribology Properties Of Sputtered Titanium Aluminum Nitride Coating On The Tungsten Carbide Insert Tool In The Dry Turning Of Tool Steel, Esmar Budi, Mohd. Razali Bin Muhamad, Md. Nizam Bin Abdul Rahman

Makara Journal of Technology

The effect of the sputtering parameters on the mechanical tribology properties of Titanium Aluminum Nitride coating on the tungsten cabide insert tool in the dry turning of tool steel has been investigated. The coating was deposited using a Direct Current magnetron sputtering system with various substrate biases (-79 to -221 V) and nitrogen flow rates (30 to 72 sccm). The dry turning test was carried out on a Computer Numeric Code machine using an optimum cutting parameter setting. The results show that the lowest flank wear (~0.4 mm) was achieved using a Titanium Aluminum Nitride-coated tool that was deposited at …

Modified Design Of Pin-On-Ring Tribometer For Hip Joint Prostheses Measurement; Case Study On Salat Activity, Muhammad Khafidh, Jamari Jamari, Sulardjaka Sulardjaka, Mohamad Tauviqirrahman, Emile Van Der Heide

Makara Journal of Technology

Total hip replacement (THR) is one of the most successful orthopedic surgical procedures for replacing a broken hip joint. In THR, wear may occur at the articulating surface of the acetabular cup and the femoral head. In Indonesia, the country with the largest Muslim population in the world, most of the inhabitants do salat (praying) every day. THR users are banned from doing salat for fear it will damage the hip joint prostheses. The previous wear calculation methods on the hip joint prostheses use the gravimetric, coordinate measuring machine (CMM), profiler, and geometric method. The disadvantages of the previous methods …

Continuous Production Of Nanotubes And Carbon Clusters By Use Of The Revolver-Injection-Type Arc Jet Producer, Tetsu Mieno, Naoki Matsumoto, Takahashi Tomie, H. Inoue

Makara Journal of Technology

Efficient and continuous production of fullerenes, single-walled carbon nanotubes (SWNTs), and carbon nano-particles has been developed by the JxB arc jet method, where the Lorentz force of magnetic field jets out gaseous carbon particles to the JxB direction. In order to realize continuous mass production of these carbon clusters, the revolverinjection- type arc jet producer (RIT-AJP) has been developed. Production of fullerenes, endohedral metallo-fullerenes, SWNTs, metal-encapsulated carbon nano particles has been examined.

Lateral Load Resistance Of Laminated Veneer Lumber Sengonwooden Joints With Wooden Dowels, Niken Palaeowati, Ali Awaludin, Suprapto Siswosukarto

Makara Journal of Technology

Analytical models for wooden-doweled joints need to be developed. The objective of this research is to determine whether the strength of wooden-doweled joints can be well predicted by equations developed for steel-doweled joints. In this experiment, various connection parameters, such as dowel diameter, species of the wooden dowel, and angle of joints, are studied. The joint specimens are loaded in a quasi-static state with four replications each. A5% offset diameter method is used to determine the lateral load resistance of the tested joints, while the predictions are evaluated by equations given in Indonesian National Standard (SNI) 7973-2013 and the European …

Assessing Fishing Port Locations For Adaption Into Yacht Marinas In Taiwan, Ching-Min Yang, Chi-Chang Lai1, Long-Jing Wu, Jan-Jung Li

Journal of Marine Science and Technology–Taiwan

As fishing resources gradually disappear, the original functions of fishing ports change. Modernizing traditional fishing ports is valuable for the fishing industry, tourism, and waterfront development. To determine suitable locations for such ports, an analytic hierarchy process and an interview survey were used to objectively analyze inputs from fishing port managers and yacht users. To establish additional yacht marinas in fishing ports, both groups attached importance to the “support of government and integration of policies” (rank and additive weight of manager : user = 1[0.185] : 2[0.119]). Therefore, inclusion of a complete and appropriate management mechanism must be emphasized during …

Offshore Structural Dynamic Analysis Considering Soil-Structure Interaction By A Coupled Bem And Meshfree Method, Min-Chou Tsai, Hsien Hua Lee, Tinh Quoc Bui, Chuanzeng Zhang

Journal of Marine Science and Technology–Taiwan

An investigation of dynamic offshore structure considering soil-structure interaction by a coupled approach based on boundary element and meshfree methods is presented. The moving Kriging interpolation is used for generating the shape functions because of possessing the Kronecker delta property, which makes easier in imposing the essential boundary conditions. The governing elastodynamic equations are transformed into a standard weak formulation. It is then discretized into a meshfree system of time-dependent equations, which are solved by the standard implicit Newmark time integration scheme. Numerical examples illustrating the applicability and effectiveness of the proposed method are presented and discussed in details. A …

Bio-Inspired Robotic Fish With Vision Based Target Tracking, Eric Anderson

Open Access Theses

The lionfish is an invasive species that out-competes and overcrowds native sh species along the eastern seaboard of the United States and down into the Caribbean. Lionfish populations are growing rapidly. Current methods of monitoring lionfish populations are costly and time intensive. A bio-inspired robotic fish was built to use as an autonomous lionfish tracking platform. Lionfish are tracked visually using an onboard processor. Five different computer vision methods for identification and tracking are proposed and discussed. These include: background subtraction, color tracking, mixture of Gaussian background subtraction, speeded up robust feature (SURF), and CamShift based tracking. Each of these …

Geometric Solution In Progressive Collapse Analysis Of Hull Girder, Ertekin Bayraktarkatal, Gökhan Tansel Tayyar

Journal of Marine Science and Technology–Taiwan

This paper presents a calculation model for stiffened plates to determine the ultimate strength of ship hull girders from their curvatures using a geometrical approach. The present study employed Smith’s method, in which the cross-section is divided into smaller elements consisting of a stiffener(s) and attached plating. The strength of beam-columns and stiffened plates was obtained using an iterative numerical approach. The deflection curve was evaluated using the curvature values directly instead of by solving differential equations. The deflection curve was taken as an assembly of chains of circular arcs. The ultimate strength of the hull girder of a 1/3 …

Adjustable Resonance Frequency Of Rf-Mems Capacitor By Using Comb- Drive Actuators: A Design Approaches, Agus Santoso Tamsir, Sandy Tannu Wijaya, Dato’ Burhanuddin Yeop Majlis

Makara Journal of Technology

The needs of smaller size RF varactor is a must today, and MEMS comes to be the potential one. In this paper we proposed an adjustable resonance RF-MEMS varactor by using comb-drive actuators placing in each side of the square movable plate. In our preliminary simulation, we found that the device can work properly but some constraints comes such as the dominancies of harmonic resonance frequencies that influences into the nominal capacitances. Therefore for the next step of development we have to find out the window of the structural dimension for a certain spans and a certain operating frequencies.