Manufacturing Commons^™

Simulating The Flow Of Students Through Cal Poly's Undergraduate Industrial Engineering Program For Policy Analysis, Alexander Clayton Weber

Industrial and Manufacturing Engineering

The purpose of this project is to analyze the flow of Industrial Engineering students at California Polytechnic University San Luis Obispo in order to measure various graduation metrics by use of a simulation. Currently, graduation rates are relatively low in comparison with the rest of the state of California and future growth and decreased budgets may threaten graduation rates for incoming students. This simulation will identify bottleneck classes [those that hold up students from graduating] and provide a basis for a sensitivity analysis in which different scenarios are constructed to determine their effects on graduation metrics. The simulation will offer …

Lunalight - Bringing Light To The Expanding World, Gabriela M. Igel, Daniel J. Patrick, Kimberley M. Smith

Materials Engineering

The LunaLight, a solar rechargeable light and cell phone charger, addresses the lack of access to electricity faced by 1.4 billion of the world’s population (International Finance Corporation). The LunaTech team has developed a product that is bright, simple, compact, versatile and competitive with existing products. Through a partnership with the non-profit organization One Million Lights, LunaTech has improved a previous team’s design to address user feedback, concerns of durability, and manufacturability.

The LunaLight design includes a 5 component plastic housing held together by 4 screws, a surface mounted PCB, a lithium-ion (Li-Ion) battery, one high-brightness LED, a solar panel, …

Application Of Systems Engineering And Project Management For Algae Photo Bioreactors, Andrew S. Balberchak

Industrial and Manufacturing Engineering

EXECUTIVE SUMMARY

Today there is much talk about different sources for biofuel to replace the decreasing supply of fossil fuels. Algae seem very promising with its abundance across the globe and relatively simple growing conditions. Lipids can be extracted from this organism which is then converted to biofuel. Although biofuel production from algae is not economically viable at this stage, researchers are suggesting using the by-products of algae for supplemental and healthcare use. If true, this could justify the economics of obtaining fuel from algae by creating more markets from various algae products.

Cal Poly State University’s Food Science and …

Convertible High Heel Design, Mathew Caspari, Tyler Shelton

Industrial and Manufacturing Engineering

Many women feel pain and discomfort when wearing high heels to certain events. This is a problem because it can lead to a variety of health issues. It would be beneficial and convenient if a woman could remove the heelpiece from her shoe while still wearing the same product. However, there is currently no popular high heels that can convert to a flat shoe on the market today. Our goal was to perform an in depth human factors analysis with regards to high heel use and formulate a solution to these problems. After reviewing literature, conducting a survey, and analyzing …

Thermal Characterization Of A System On Chip (Soc), James Gilstrap

Industrial and Manufacturing Engineering

Electronics are getting more and more advanced. Companies are designing their product to be more powerful, but at the same time they are designing them to be smaller and more user friendly. Heat becomes a major factor with the limited amount of surface area. The objective of this project is to measure the junction temperature of three system on chips (SoC) under various loading conditions and their time constant. The junction temperature was measured based on the diode’s I-V linear relationship. Both calibration and measurement of the junction temperature were conducted for three different SoC packages. The measurement results can …

Reason-To-Reuse: A Sustainable To-Go Food Storage Container System For Restaurants, Ryan Christopher Labuda

Industrial and Manufacturing Engineering

A food storage container (FSC), also known as a to-go box, is a very popular way for Americans to pick up food when in a rush and take it with them or store leftovers after dining. Some of the more popular materials that make up FSCs include Styrofoam, paper and plastic. These FSCs are meant for one time use and subsequently the majority end up as waste in their local regions. Reason-To-Reuse is a sustainable business that provides an alternative to the current model of disposable FSCs at restaurants by cutting down on waste. The objective of the Reason-To-Reuse project …

Design And Analysis Of A Materials Management System For Boeing Commercial Airplanes' (The Boeing Company) Metallic Raw Material Supply Chain With A Focus On Lead Time Manipulation And Corresponding Effects On Inventory And Cost, Henry Lu

Industrial and Manufacturing Engineering

The purpose of this project is to identify the costs associated with an aggregation strategy run by Boeing Commercial Airplanes. In order to identify these costs, a rudimentary replenishment system must be designed for the supply chain due to the fact that there is currently no such system in place. This replenishment system will be used to create a model (created in Excel) to calculate the total annual costs of the system. The model must allow changes to some of the important inputs such as mill performance measures and lead times and report the resulting changes in the total annual …

Companion Pass Program, Andrew Toney

Industrial and Manufacturing Engineering

At the end of each quarter the students of Cal Poly prepare to sign up for their classes for next quarter. This process is more difficult for seniors who must meet very specific requirements in order to graduate on time. Students can spend hours trying to find the “perfect schedule”, that one schedule that fits their personal schedule and their graduation requirements, while not over taxing themselves during that quarter by having too much class work. This Cal Poly explores the creation and implementation of an extra scheduling tool to address the weaknesses of the current scheduling system, PASS, and …

Bicycle Mounted Iphone 5 Case With Charging System, Patrick Goebel

Industrial and Manufacturing Engineering

This purpose of this project is to design and manufacture a bicycle handlebar mounted case that will house Apple’s iPhone 5 and a charging system that utilizes a charge from a generator hub in the front wheel of a bicycle. The charging system and software for this project will be developed by an Electrical Engineering Graduate student. The case and charging system must be a self-contained unit that is weather-proof and aesthetically pleasing. It must allow the user to use all of the features of the iPhone 5 under a wide range of speeds. It must be adjustable between portrait …

Analyzing The Costs Of Different Energy Storage Systems For California Polytechnic State University, Christian Royer

Industrial and Manufacturing Engineering

The goal of this project was to analyze the different ways to release energy from an energy storage device into the grid to save money. This project was worked in conjunction with a Master’s of Science student. An entire year of Cal Poly’s energy usage was examined and multiple trends were observed about when the maximum amount of energy was used. These trends looked at the time of day, the day of the week, and season to see what would be the best way to release energy into the grid to save money. There were two different batteries sizes examined …

The Decision Process Of Transitioning From A 3-Axis To A 4-Axis Or 5-Axis Mill Machine, Andrew Van Cleve, David Sherman

Industrial and Manufacturing Engineering

Companies are always looking for new ways to increase productivity and help the company save money. The way this is done is by researching new and more efficient ways to produce whatever it is the company is selling. Since there are always new technologies coming forward it can be difficult to distinguish which ones are viable and which ones are not. This paper looks at the decision of moving a company from a traditional 3-axis milling set-up to a 4-axis or 5-axis milling set-up. Through research and analysis this report will guide a company through the decision making process and …

Reducing Customer Wait Time And Improving Processes At Abc’S Atv Rentals, Thomas Allen Merrill Jr.

Industrial and Manufacturing Engineering

This project serves to explore the system bottlenecks of a small, family owned ATV rental company. The main objective is to reduce the average time a customer spends in the system, focusing on customer wait time as well as other areas that can be improved. This was done by collecting time studies and inputting the values into simulation software, which was run to represent the current system as well as various other possible scenarios encountered by rental companies. While creating the simulation, adaptive techniques were incorporated into the simulation. These techniques aim to increase the durability and reusability of the …

Evaluation And Redesign Of Potting Shed For The Non-Profit Organization, Growing Grounds Farms, Adya Sinha, Julianna Levy

Industrial and Manufacturing Engineering

Growing Grounds, a local nonprofit organization, operates as a fully functioning nursery in San Luis Obispo. Their planting facility is outdated and the process is inefficient. They have new funding available and need to determine if they should automate certain processes or improve existing methods. This report details the current process and presents two possible ergonomic solutions and the accompanying layouts and improvements. An analysis is conducted to determine which new layout is recommended for Growing Grounds based on their current production and revenue, and future recommendations are given.

Edwards Lifesciences - Skirt To Frame Attachment Manufacturing Aid, Samuel Joda, Cesar Grimaldo, Patrick Hutchinson

Mechanical Engineering

No abstract provided.

Drape Forming Machine, Adam Johnson, Will Schlosser, Brian Miller

Mechanical Engineering

The goal of this project was to build a prototype machine that formed multiple sheets of debulked pre-preg OOA carbon fiber into a 2-foot long trapezoidal shape. The machine was required to do this process semi-automatically.

Rapid Decompression Containment System, Evan Domingue, Michelle Rudney, Daniel Trees

Mechanical Engineering

Cal Poly students; Evan Domingue, Michelle Rudney and Daniel Trees; are working with General Atomics Aeronautical Systems, Inc. (GA, ASI) and engineer John Wilcox to complete a senior project. The senior project is focused on finding a solution to meet the requirement set forth in MIL-HDBK 1791 4.2.5.2 for rapid decompression which requires cargo items to be designed with pressure relief devices or to be configured for air shipment as to prevent any part from becoming a projectile in the event of catastrophic loss of aircraft cabin pressure. The goal of this project is to design a safe, cost-effective, and …

Titan 130 Engine Aft-Mount, Woody Newell, Michael Haworth, Dylan Perry

Mechanical Engineering

No abstract provided.

Exploration Station Kidshake Table, Jeremy Duhe, Philip Hopkins, Matt Ostiguy, Samantha Weiner

Mechanical Engineering

The KIDShake Table is an all mechanical earthquake shake table sponsored by the Exploration Station Children's Museum of Grover Beach. This interactive exhibit has two working mechanisms, a hand crank and pull rope, that provide two axis movement for knocking down block structures. This table was built and designed for a target age of 10 years.

Beach Wheelchair Project, Rory Aronson, Joshua Marcum, Samuel Coyne, Alex Hayes, Alexa Colburn, Max Hessel, Benedikt Strauss, Marvin Rimmele, Marco Pietsch

Mechanical Engineering

The Beach Wheelchair, Sandcrawler, is a machine intended to help give people with disabilities the full beach experience. The non-profit organization Bridge II Sports sponsored this project, and tasked us with developing the design and fabricating a prototype. This chair has several features including a linkage mechanism that raises and lowers a chair relative to an external frame, hand crank drive with Gates Carbondrive belt and sprockets, buoyant Wheeleez balloon tires, and much more.

Rebounder Fatigue Test Machine, Caroline Reeves, Will Robertson, Ethan Flory

Mechanical Engineering

JumpSport, a company that designs and sells trampolines and trampoline accessories, has sponsored this senior project team to design, build, and test a trampoline fatigue test machine. The machine must simulate a person jumping on the trampoline to test the life of JumpSport’s fitness trampolines and kids’ trampolines. Partway through the design process, the objectives were altered and this senior project team was tasked with merging with another Cal Poly senior project group to create an all-inclusive test machine to accommodate both full-trampoline testing and individual bungee cord testing.

The final design is centered on a slider crank linkage driven …