Energy Systems Commons^™

Adapting To Extreme Heat: Social, Atmospheric, And Infrastructure Impacts Of Air Conditioning In Megacities - The Case Of New York City, Harold Gamarro

Dissertations and Theses

Extreme heat events are becoming more frequent and intense in most large cities. Built-up surfaces also limit cooling mechanisms, leading to warmer conditions in cities, a phenomenon called the Urban Heat Island (UHI). This presents major challenges to reduce adverse health effects of hot weather, particularly in vulnerable populations like the elderly and low-income communities. Here we explore the overall impacts of increasing air conditioning (AC) system adoption in residences as an adaptive measure to reduce human health risks under heat waves, with New York City (NYC) as a case study. This study uses AC adoption data from the 2017 …

Capillary Forces And Wetting Dynamics By Diffuse-Interface Modeling, Fanny Thomas

Dissertations and Theses

Wetting phenomena underlie many natural and industrial processes, from the proper functioning of the lungs to the thin coating of surfaces. The three-phase interactions involved at microscopic scales play a critical role. Adding solid particles to an emulsion, for example, can drastically change the flow behavior due to capillary bridging between the particles. The study of these three-phase systems is especially relevant to the petroleum industry, where gas hydrates forming large clusters in subsea pipelines during crude oil transportation is a major concern. The dynamics of such systems is also of great interest from a fundamental perspective. Indeed describing non-equilibrium …

On The Energy Sustainability Of Active And Passive Building Integrated Technologies In The Context Of A Changing Climate For Tropical Coastal Cities, Rabindra Pokhrel

Dissertations and Theses

Caribbean Sea surface temperatures have been rising at an alarming rate of 0.020C/year. The effect of rising sea surface temperatures is reflected in increasing in 2m air temperature over the Caribbean. The rise in extreme temperatures increases human discomfort and energy demands for air conditioning (AC) putting both the population and energy infrastructure at higher risk of vulnerability. This vulnerability is amplified in compact cities where anthropogenic heat removal from the built environment further increases the temperature of the urban canyon with feedback on human comfort and energy demands. Although there has been prior work reported on mitigating energy demands …

Experimental And Computational Characterization Of Sodium Nitrate @ Silica Nano Capsules For Thermal Energy Storage Applications, Wataru Hashimoto

Graduate Research Theses & Dissertations

In this investigation, a nanocapsule composed of a sodium nitrate core and a silicon dioxide shell is synthesized, characterized, and analyzed utilizing a mixture of analytical and computational tools. The sol-gel method was selected as the process of nanoencapsulation. Analytical characterization techniques employed in this investigation include differential scanning calorimetry (DSC) to measure melting temperatures and enthalpies of fusion, dynamic light scattering (DLS) to calculate particle size distributions, scanning electron microscopy (SEM) to analyze surface characteristics, transmission electron microscopy (TEM) to perform shell characterization, and energy dispersive X-ray spectroscopy (EDS) to determine chemical composition. Preliminary results indicated a decrease in …

Carbon-Based Interlayers In Perovskite Solar Cells, Aleksandr P. Litvin, Xiaoyu Zhang, Kevin Berwick, Anatoly V. Fedorov, Weitao Zheng, Alexander V. Baranov

Articles

Perovskites are solution-processed, high-performance semiconductors of interest in low-cost photovoltaics. The interfaces between the perovskite photoactive layers and the top and bottom contacts are crucial for efficient charge transport and minimizing trapping. Control of the collection of charge carriers at these interfaces is decisive to device performance. Here, we review recent progress in the realization of efficient perovskite solar cells using cheap, easily processed, stable, carbon-based interlayers. Interface materials including graphene, carbon nanotubes, fullerenes, graphene quantum dots and carbon dots are introduced and their influence on device performance is discussed.

Numerical Investigation Of Darrieus Wind Turbine With Slotted Airfoil Blades, Ahmed Elbaz, Omar Sherif Mohamaed, Ahmed Abdelhamid Ibrahim, Ahmed Khaled Etman, Amr A. Abdelfattah

Mechanical Engineering

Low starting torque is considered as one of the major drawbacks of Darrieus type vertical axis wind turbine (VAWT). Design optimization to overcome this problem by modifying the airfoil geometry has received great attention by the wind energy community. Moreover, efforts have been directed towards augmenting the power coefficient of the turbine. In the present work, the effect of employing slotted airfoil as turbine blade on the performance and starting characteristics has been investigated. The slot parameters; slot location, angle of inclination, and dimensions, were optimized for NACA 0018 airfoil which is commonly used in Darrieus turbines. The flow over …

Utility-Scale Solar Pv Performance Enhancements Through System-Level Modifications, Andrew D. S. Glick, Naseem Ali, Juliaan Bossuyt, Marc Calaf, Raul Bayoan Cal

Mechanical and Materials Engineering Faculty Publications and Presentations

Performance of solar PV diminishes with the increase in temperature of the solar modules. Therefore, to further facilitate the reduction in cost of photovoltaic energy, new approaches to limit module temperature increase in natural ambient conditions should be explored. Thus far only approaches based at the individual panel level have been investigated, while the more complex, systems approach remains unexplored. Here, we perform the first wind tunnel scaled solar farm experiments to investigate the potential for temperature reduction through system-level flow enhancement. The percentage of solar irradiance converted into electric power depends upon module efficiency, typically less than 20%. The …

Development Of An Activity-Based Windowing Approach To Evaluate Real-World Nox Emissions From Modern Medium And Heavy-Duty Diesel Trucks, Rasik Pondicherry

Graduate Theses, Dissertations, and Problem Reports (ETD)

The introduction of in-use emissions regulations by the United States Environmental Protection Agency (U.S.EPA) requires medium-duty (MD) and heavy-duty (HD) engine manufacturers to demonstrate emissions compliance during in-fleet operation. In the United States (U.S.), the Not-to-Exceed (NTE) method is used to evaluate real-world emissions compliance from on-highway MD and HD trucks. Regulatory agencies, engine manufacturers and research entities have identified that the NTE method incorporates numerous exclusions and evaluates emissions compliance only under selective operating conditions that are favorable for the selective catalytic reduction (SCR) system to reduce oxides of nitrogen (NOx) emissions efficiently. Such operation is typically encountered only …

Techno-Economic Feasibility Of Solar Powered Electric Vehicle Charging Stations In West Virginia, Houssem Eddine Younes

Graduate Theses, Dissertations, and Problem Reports (ETD)

This project explores the techno-economic feasibility of installing a photovoltaic (PV) system to power electric vehicle (EV) charging stations in West Virginia. A case study of a parking garage charging station is considered. The PV system performance and economic feasibility are assessed for two different system configurations and two financial scenarios. Two system variations one including PV only and another with on-site storage battery are modelled using the System Advisor Model (SAM) developed by the National Renewable Energy Laboratory. Initial technical specifications of the PV system, battery system and EV chargers were selected as a reference case. Through parametric simulation, …

A Solar‐Driven Membrane‐Based Water Desalination/Purification System, Abdellah Shafieian Dastjerdi

Theses: Doctorates and Masters

Lack of fresh water has turned into one of the major challenges of the world in the present century. Desalination of brackish or seawater has been proven to be one of the best solutions to cope with this global challenge. Among all the desalination methods, Membrane Distillation (MD) is well known as a cost effective and profitable technology for treating saline water. However, higher energy consumption compared to other separation techniques has been reported as MD’s main drawback. That is why the application of solar energy to provide the thermal energy requirement of MD modules has been the focal point …

Indirect Thermosiphon Flat-Plate Solar Collector Performance Based On Twisted Tube Design Heat Exchanger Filled With Nanofluid, Mahmoud Eltaweel, Hazem Hussien, Ahmed A. Abdel-Rehim

Mechanical Engineering

No abstract provided.

Energetic And Exergetic Analysis Of A Heat Pipe Evacuated Tube Solar Collector Using Mwcnt/Water Nanofluid, Mahmoud Eltaweel, Ahmed A. Abdel-Rehim

Mechanical Engineering

Increasing the energy demand and the limited availability of conventional energy sources are the main challenges to secure the human future. Solar energy is an attractive source of energy to ensure the sustainability of energy in this world for now and for the future. Evacuated tube solar collector is a solar thermal collector mostly used for domestic applications. The replacement of the working fluid with nanofluid can enhance the heat transfer even for low temperature applications. The effect of multi-walled carbon nanotubes and water nanofluid as working fluid in evacuated tube solar collector is used to experimentally investigate the energy …

A Reduced Model For Microbial Electrolysis Cells, Dina Aboelela, Moustafa A. Soliman, Ibrahim Ashour

Chemical Engineering

Microbial electrolysis cells (MECs) are breakthrough technology of cheap hydrogen production with high efficiency. In this paper differential-algebraic equation (DAE) model of a MEC with an algebraic constraint on current was studied, simulated and validated by implementing the model on continuous-flow MECs. Then sensitivity analysis for the system was effectuated. Parameters which have the predominating influence on the current density and hydrogen production rate were defined. This sensitivity analysis was utilized in modeling and validation of the batch-cycle of MEC. After that parameters which have less influence on MEC were eliminated and simplified reduced model was obtained and validated. Finally, …

A Reduced Model For Microbial Fuel Cell, Dina Aboelela, Moustafa A. Soliman, Ibrahim Ashour

Chemical Engineering

Microbial fuel cells (MFCs) are a group of microbial electrochemical cells (bioreactors) that are used to generate energy from organic waste found in wastewater. MFCs represent a promising method of waste disposal and production of electricity. Scaling up the use of MFCs requires extensive analysis and detailed grasp of the required processes. The current work aimed to study a model of an MFC, and find the optimum parameters needed for maximum energy production. The process was simulated and validated on continuous-flow MFCs with a Columbic efficiency of 162% and 35% COD removal. Sensitivity analysis of the model was performed. The …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

Synthesis And Connection Of Iridium Hydrogen Evolution Catalyst To Chlorella Vulgaris Photosystem I For Light-Driven Hydrogen Evolution, Anna Ramirez

Honors Program Theses and Projects

Hydrogen gas has been shown to be a promising energy source as options other than fossil fuels are being looked at in the face of anthropogenic climate change. It is known that anthropogenic climate change is caused by the production of greenhouse gases being let into the atmosphere, specifically a common reason for this is the burning of fossil fuels for energy. The overall goal of this project is to design a biochemical hybrid system that will be used to make H 2 gas and does not require the use of fossil fuels. Burning hydrogen as fuel produces only water …

City Of New Smyrna Beach Solar Feasibility Assessment, Florida Solar Energy Center, Charles Withers, Jr.

FSEC Energy Research Center®

At the request of the City of New Smyrna Beach, the Florida Solar Energy Center (FSEC) assessed rooftop solar and building energy efficiency improvement potential for 17 city-owned facilities. The intent has been to assist City leaders in identifying opportunities to reduce the City's overall electricity consumption and increase its use of renewable energy.

The FSEC team conducted Level 1 energy audit activities and site assessments including:

On-site assessment

• Solar feasibility measurements and characterization including orientation, roof shading (adjacent structures, encroaching trees, etc.), available roof area, system output, annualized savings
• HVAC characterization
• Lighting survey
• Occupancy density, schedule, thermostat settings

Post …

Experimental Study Of Condensation In A Thermoacoustic Cooler With Various 3d Printed Regenerators Using Water Vapor As The Working Fluid, Aibek Bekkulov, Andrew Luthen, Ben Xu

Mechanical Engineering Faculty Publications

Thermoacoustics (TA) deals with the conversion of heat into sound and vice versa. The device that transfers energy from a low temperature reservoir to a high temperature one by utilizing acoustic work is called TA cooler (TAC). The main components of a typical TAC are a resonator, a porous regenerator (e.g. stack of parallel plates) and two heat exchangers. The thermoacoustic phenomenon takes place in the regenerator where a nonzero temperature gradient is imposed, and interacts with the sound wave. The low temperature at the cold end of TAC can be used to condense water from the humid air and …

Energy Performance Certification: Misassessment Due To Assuming Default Heat Losses, Ciara Ahern, Brian Norton

Articles

Energy Performance Certificates (EPCs) are issued when dwellings are constructed, sold or leased in the EU. Where the cost of obtaining the required data is prohibitive, EPC assessors use nationally applicable default-values. To ensure that dwellings are not assigned a wrongly-higher EPC rating, a standardised thermal bridging transmittance coefficient (Y-value) is typically adopted for all existing dwellings while worst-case overall heat loss coefficients (U-values) are used. Default U-values are applied to a specific building element type (roof, wall, floor etc.) based on building codes and regulations applicable at time of construction. Due to significant building fabric upgrades, default U-values are …

Hvac System Energy Audit For Leverett Elementary School, Connor Smalling

Biological and Agricultural Engineering Undergraduate Honors Theses

Leverett Elementary School is located in Fayetteville, AR. The school needs significant upgrades to its infrastructure. The Fayetteville Public School District has voted to pursue an Energy Services Performance Contract (ESPC) in order to finance the desired upgrades to Leverett Elementary, among other schools in the district.

The scope of this thesis was to perform an energy audit on the existing heating, ventilation, and air conditioning (HVAC) system. By using an energy modeling software, eQuest, the building and the existing base system were modeled to determine utility consumption. Three different HVAC system alternatives were analyzed against the base system by …