Materials Science and Engineering Commons^™

Development And Testing Of Irradiation-Tolerant High-Entropy Alloys, Matthew John Luebbe

Doctoral Dissertations

"High entropy alloys (HEAs) are a novel class of alloys made of multiple principal elements in near equal proportions. They have been observed to possess an array of useful engineering properties, such as good ductility and fracture toughness, high temperature strength, oxidation and corrosion resistance and irradiation resistance. This makes them promising candidates for harsh environments, especially nuclear reactors. These properties could potentially realize advanced Gen IV nuclear reactor designs. However, most HEA compositions contain Co, which activates under irradiation, generating safety and waste management concerns. This work studies three compositions of Co-free HEAs whose strength and microstructures are evaluated …

Ceramic Dielectrics For High Temperature Capacitor Applications, Alan Daniel Devoe

Doctoral Dissertations

Technical progress in microelectronics is allowing operation in environments that were previously considered impossible. Building complete electronic circuits for applications above 450 degrees C, such as the planned NASA missions to Venus, require a variety of active and passive components, including multilayer ceramic capacitors (MLCC).

This study explores calcium zirconate CaZrO3 and magnesium oxide MgO based dielectric compositions for MLCC applications that are capable of operating at extreme temperatures between 450 degrees C and 600 degrees C. Both materials were characterized with respect to impurities, dopants, crystal structure and microstructural development. Dielectric properties were measured to determine permittivity, dissipation factor, …

Characterization And Optimization Of Sand And Tung Oil-Based Resins For Binder-Jet 3d Printing, Daniel I. Ajiola

College of Graduate Studies: Theses & Dissertations

Binder-jet 3D printing as a transformative technology in additive manufacturing, offers the ability to fabricate complex structures with diverse materials. This thesis investigates the use of a sustainable tung oil-based resin to create composites, exploring the potential for an eco-friendly alternative to synthetic binders.

The aim of this research is to develop and characterize a bio-based resin formulation, using tung oil as the primary binder, for application in binder-jet 3D printing with sand as the reinforcement. The resin formulation was prepared by combining tung oil, n-butyl methacrylate, divinylbenzene, and di-tert-butyl peroxide in precise proportions, ensuring a balanced mixture that supports …

Effect Of Metal Ions On The Reactive Oxygen Species Scavenging Capabilities Of Cerium Oxide For Biological Applications, Agastya Mittal

Honors Undergraduate Theses

Ceria nanoparticles' capabilities to defend cells against oxidative stress through superoxide dismutase activity are well-documented. Ceria nanoparticles demonstrate a ratio between 3⁺/4⁺ oxidative states on the surface of the particles to exhibit oxygen vacancies, a feature that allows these particles to scavenge Reactive Oxygen Species (ROS) in times of Oxidative Stress. Oxidative stress arises from many wounds in the body, such as wounds in the skin, and can have significant impacts on the health of an individual. Even when receiving treatment for the skin wound, ROS can circulate from around the wound, be generated from an imbalance …

A Signal Processing And Mechanical Design Approach To Understanding Triboelectric And Piezoelectric Nanogenerators’ Output, Nicholas Rose

Honors Undergraduate Theses

Scalable energy harvesters—capable of converting motion into electrical output—provide promising solutions to increasing energy demands. This thesis was inspired by the potential biomedical applications of piezoelectric nanogenerators (PENG) and triboelectric nanogenerators (TENG). In theory, these devices could convert mechanical energy from the body into usable electricity for self-powered electronics such as pacemakers or cochlear implants. In line with this goal, this project worked to design a sustainable and biocompatible PENG; however, early devices produced inconsistent voltage. These output inconsistencies motivated an exploration of device reproducibility, but characterizing piezoelectric output signals is a particular challenge in the field. Subtle to significant …

Effect Of Aging Duration On The Microstructure And Corrosion Characteristics Of 17-4 Ph Stainless Steel, G. Narasinga Rao, Subrat Kumar Baral, Y. Madhavi, Sriram Vijayan, Ravikumar Dumpala

Michigan Tech Publications

Heat treatment plays a critical role in inducing key microstructural changes necessary to enhance corrosion resistance of 17-4 PH stainless steel (SS). During the process, precipitates form within the metal matrix, contributing to the strength of the martensitic steel. Inconsistencies in the literature concerning the response of 17-4PH SS to heat treatment have been noted. Therefore, this study examines the impact of aging duration on microstructural characteristics, microhardness, and corrosion resistance of material. The solution heat-treatment process consisted of heating the material to 1040 °C for one hour and rapid cooling in water. Subsequently, aging treatment was carried out at …

Multifunctional Nanoscale Pigments: Emerging Risks And Circular Strategies For A Sustainable Future, Ajay Vikram Singh, Preeti Bhardwaj, Vimal Kishore, Sunil Choudhary, Akihiko Hirose, Neha Gupta, Madleen Busse, Swarn Lata Singh, Christopher J. Osgood

Biological Sciences Faculty Publications

The substantial penetration of nanoscale pigments into a range of sectors has changed the dynamics of industries such as medical, material science, and many more. Nonetheless, their persistence in the environment and probable adverse impacts on health require that an assessment of such risks be formulated considering the One Health perspective. This viewpoint considers the crossing of boundaries of progress in the nanotechnology of nanoscale pigments with environmental, animal, and human health and emphasizes the significance of collaborative activity. Traditional perspectives explain the distribution of pigment history, while the nanotechnology of today's accessibility poses problems regarding utilization, toxicities, and interactions …

First-Principles Study Of Ferroelectric Properties And Co2 Reduction Reaction Capabilities In Two-Dimensional Monolayers And Heterostructures, Mo Li

Dissertations

Two-dimensional (2D) materials hold significant potential for CO₂ reduction reactions (CO₂RR) due to their high surface-to-volume ratio. However, achieving high selectivity for desired products and overcoming limitations posed by scaling relationships remain challenging. Recent studies suggest that ferroelectric (FE) materials with switchable out-of-plane polarization (OOP) can effectively tune the adsorption behavior, thermodynamics, and kinetics of CO₂RR, offering promising solutions to these challenges. Using density functional theory (DFT) and the Berry phase approach, this work expands the family of 2D ferroelectrics by theoretically identifying Y₂CO₂, Y₂CS₂, and Sc …

Determination Of Electrochemical Parameters For Predicting Reaction Mechanism And Algorithmic Approaches To Pain Assessment, Huize Xue

Dissertations

This dissertation introduces novel advancements in electrochemical kinetics and pain assessment, structured into two main parts. The first part focuses on the comprehensive analysis of the kinetic and mechanistic aspects of electrochemical reactions, utilizing a combination of experimental techniques and simulation methods. A new software tool, Envismetrics, was developed using Python to facilitate the analysis of complex electrochemical data, including cyclic voltammetry (CV), chronoamperometry (CA), and hydrodynamic voltammetry (HDV). The software was rigorously tested and validated with well-characterized redox systems such as the ferricyanide/ferrocyanide couple, dimethylamine borane (DMAB), and Per- and Polyfluoroalkyl Substances (PFAS). It was successfully used to determine …

Gas-Generating Reactive Materials: Design, Evaluation And Effect Of Morphology On Their Ignition And Combustion, Purvam Mehulkumar Gandhi

Dissertations

This work investigates optimizing gas-generating reactive materials, focusing on particle morphology's effect on ignition and combustion behavior. Metal-based gas-generating energetic materials (EMs) are promising alternatives to replace traditional CHNO compounds. Design of advanced metal-based EMs requires consistent ways of evaluating how their characteristics affect their ignition and combustion. Many relevant evaluation approaches exist; however, the results may be difficult to compare directly across different studies. Commonly, experimentalists ignite metal-based EMs in enclosed chambers and report pressures, P. However, direct comparison of these pressures is hindered by variations in the chamber volume, V, and the EM mass, m. To standardize the …

Decomposition Of Diisopropyl Methylphosphonate (Dimp) Exposed To Elevated Temperatures And Combustion Products Of Reactive Materials, Elif Irem Senyurt

Dissertations

The safe and efficient destruction of chemical weapon agents (CWAs) stockpiles remains a critical global challenge. Understanding the thermophysical properties, decomposition mechanisms, and interactions of CWAs with their environment is crucial for developing effective strategies to mitigate their threats. Diisopropyl methylphosphonate (DIMP) and Dimethyl methylphosphonate are commonly used nerve agent surrogates. This dissertation focuses on DIMP and DMMP, investigates their properties and behavior under conditions relevant to prompt defeat scenarios.

The thermophysical properties of DIMP and DMMP were experimentally characterized, including vapor-liquid surface tension (3-60 °C) and viscosities of neat and aqueous solutions. Results revealed significant non-ideal behavior in aqueous …

High-Frequency Gold Price Forecasting: Optimizing Multi-Layer Perceptron With Genetic Algorithm, Vrtagic Sabahudin, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Accurately forecasting gold price actions is critical in financial markets due to gold's role as a safe-haven asset. This paper addresses the challenge of forecasting gold prices by applying a Genetic Algorithm (GA) with a Multi-Layer Perceptron (MLP) model. The research exploits historical financial data from various instruments, including gold futures, Bitcoin, and key currency pairs, to improve prediction accuracy. By optimizing the MLP's hyper parameters through GA, the model efficiently captures complex relationships in high-frequency data, achieving a remarkable R² score of 0.9993. This level of precision demonstrates the model's potential for providing actionable insights for traders and investors. …

Single-Step Synthesis Of Activated Carbon From Arabica Spent Coffee Ground Using K2co3 As Activator Agent, Ghina Ivana Mieldan, Yuliusman Yuliusman

Journal of Materials Exploration and Findings

Activated carbon is a nanomaterial that is often used as an effective adsorbent. Activated carbon raw materials can use biomass, such as coffee grounds, which can be found along with the growth of public interest in coffee drinks. Chemical activators are used for activation to increase biomass carbon's adsorption capacity. Using K₂CO₃ activator to increase the specific surface area of activated carbon is more harmless than KOH. The use of spent coffee grounds as carbon source and food additive K₂CO₃ as an activator can make food-grade activated carbon that can be used for food. …

Effect Of Alkyd And Polyester Resin Compositions On Corrosion Resistance, Blistering, And Adhesion In Utilization Of Oily Sludge As Anti-Rust Coating Material, Gerets Land Kakalang, Yohanes David Kristianto, Johny Wahyuadi Mudaryoto

Journal of Materials Exploration and Findings

Oil sludge is a waste derived from upstream and downstream activities of the oil and gas industry which is estimated at 10,000 tonnes generated from all PERTAMINA downstream activities spread across various fields, processing units and depots throughout Indonesia. Oil sludge has the same characteristics as asphalt, where asphalt in previous studies can be used as an anti-rust coating, so that the handling of oily sludge can be topped up by reusing and having its own added value. The purpose of this research is to utilise waste oily sludge as an alternative anti-rust coating material and compare alkyd resin and …

A Comparative Study Of Conventional And Statistically Active Corrosion Methods For Corrosion Growth Assessment Of A 24-Inch Gas Pipeline, Rudi Rinaldi, Jaka Fajar Fatriansyah

Journal of Materials Exploration and Findings

Component failures in oil and gas pipelines can have fatal consequences, leading to operational downtimes and environmental damage. Knowledge of the corrosion growth rate is fundamental to pipeline integrity management, as it is essential for risk assessment and decisions related to asset management. This article aimed to compare two approaches for the corrosion growth estimation of the 24-inch offshore gas pipeline: the conventional method versus the Statistically Active Corrosion (SAC) method. This article is based on the in-line inspection (ILI) results of two consecutive assessments from 2020 to 2023 of the entire 73 km of the pipeline. The results show …

Comparative Analysis Of Risk-Based And Time-Based Inspection Application In Hydrocarbon And Chemical Industries: A Review, Azizar Azizar, Nofrijon Sofyan

Journal of Materials Exploration and Findings

RBI and TBI strategies are comparatively reviewed in terms of their contribution to maintaining asset integrity for asset owners in the hydrocarbon and chemical industries. The objective is to assess various methods on a cost-efficient and risk-managed operational safety basis. It utilizes common industry standards such as API 580 for RBI, and API 510, API 570, and API 653 for TBI, and also case studies and literature analysis. The analysis of data was conducted to examine how each approach deals with inspection planning and decision-making. They suggest that RBI's risk-based prioritization strategy leads to more effective management of high-risk assets, …

Cropsync: Ai-Powered Sustainable Crop Management, Ziad Doughan, Ibrahim Mneimneh, Zouheir Nakouzi, Noor Al Khaib, Samer Damaj, Jamal Chaaban, Hamza Mrad, Sari Itani

BAU Journal - Science and Technology

CropSync is a smart agriculture system that uses AI and IoT technologies to enable sustain- able crop management and precision farming. The system aims to address the challenges faced by the agriculture sector, such as increasing food production to meet global population demands while minimizing environmental impact. CropSync integrates sensors, cameras, and cloud-based analytics to provide farmers with real-time insights and recommendations for optimizing crop cul- tivation. The system upholds engineering professional and ethical standards, considering broader social, environmental, and economic implications. From a social perspective, CropSync improves food security and enhances farmers’ livelihoods through increased productivity and efficient re- …

Dendrite-Free Strategies For Aqueous Zinc-Ion Batteries: Structure, Electrolyte, And Separator, Gang Wu, Wu-Hai Yang, Yang Yang, Hui-Jun Yang

Journal of Electrochemistry

Continued growth in energy demand and increased environmental pollution constitute major challenges that need to be addressed urgently. The development and utilization of renewable, sustainable, and clean energy sources, such as wind and solar, are crucial. However, the instability of these intermittent energy sources makes the need for energy storage systems increasingly urgent. Aqueous zinc-ion batteries (AZIBs) have received widespread attention due to their unique advantages, such as high energy density, cost-effectiveness, environmental friendliness, and safety. However, AZIBs face significant challenges, mainly the formation of zinc dendrites that seriously affect the stability and lifetime of the batteries, leading to battery …

Electrochemical-Method-Induced Strong Metal-Support Interaction In Pt-Cnt@Sno2 For Co-Tolerant Hydrogen Oxidation Reaction, Shen-Zhou Li, Zi-Jie Lin, Qi-An Chen, Zhao Cai, Qing Li

Journal of Electrochemistry

Inducing the classic strong metal-support interaction (SMSI) is an effective approach to enhance the performance of supported metal catalysts by encapsulating the metal nanoparticles (NPs) with supports. Conventional thermal reduction method for inducing SMSI processes is often accompanied by undesirable structural evolution of metal NPs. In this study, a mild electrochemical method has been developed as a new approach to induce SMSI, using the cable structured core@shell CNT@SnO₂ loaded Pt NPs as a proof of concept. The induced SnO_x encapsulation layer on the surface of Pt NPs can protect Pt NPs from the poisoned of CO impurity in …

Contributions To Journal Of Electrochemistry, The Flagship Journal Of Chinese Chemical Society Electrochemical Committee, Will Be Listed As A New Recommendation Policy For China Youth Awards Of Electrochemist, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.