Materials Science and Engineering Commons^™

Femtosecond Photon-Mediated Plasma Enhances Photosynthesis Of Plasmonic Nanostructures And Their Sers Applications, Peng Ran, Lan Jiang, Xin Li, Bo Li, Pei Zuo, Yongfeng Lu

Department of Electrical and Computer Engineering: Faculty Publications

Laser ablation in liquid has proven to be a universal and green method to synthesize nanocrystals and fabricate functional nanostructures. This study demonstrates the superiority of femtosecond laser-mediated plasma in enhancing photoredox of metal cations for controllable fabrication of plasmonic nanostructures in liquid. Through employing upstream high energetic plasma during laser-induced microexplosions, single/three-electron photoreduction of metallic cations can readily occur without chemical reductants or capping agents. Experimental evidences demonstrate that this process exhibits higher photon utilization efficiency in yield of colloidal metal nanoparticles than direct irradiation of metallic precursors. Photogenerated hydrated electrons derived from strong ionization of silicon and water …

Atmospheric Pressure Plasma‐Induced Decolorisation Of Cotton Knitted Fabric Dyed With Reactive Dye, Yaohui Liu, Chester Kin-Man To, Mei‐Ki Ngai, Chi-Wai Kan, Chua Hong

Faculty of Science & Technology (THEi)

The aim of this study was to investigate the decolorisation effect of atmospheric pressure plasma treatment on knitted fabrics dyed with reactive dyes under different processing parameters, ie, air concentration, treatment duration and water content. The fabrics were dyed with reactive dye of a blue colour, and the colour depths were 0.5%, 1.5% and 3.0% on weight of fabric. The colour properties of untreated and plasma‐treated fabric samples were evaluated by means of reflectance, K/S and relative unlevelness index. The colour properties were evaluated instrumentally and quantitatively in order to study the decolorisation effect induced by atmospheric pressure plasma treatment. …

An Orthogonal Study Of Industrial Scale Colour Fading Process Of Cotton Fabric, Yaohui Liu, Chester Kin-Man To, Hiu-Yan Cheung, Chi-Wai Kan, Chua Hong

Faculty of Science & Technology (THEi)

Colour fading is now a popular process used for imparting a vintage look to textile and fashion products, which enhances market value because of the current fashion trends. This study examined a non-aqueous colour fading process with the use of oxygen plasma-induced ozone treatment. An industrial scale machine and commercially available red sulpur-dyed cotton fabric (with 0.5 %, 1.5 % and 2.5 % colour depths) were used in this study. Since the colour fading process factors are inter-related to each other, a specific experiment approach, i.e. orthogonal method, was used for obtaining the optimum conditions in an industrial scale colour …

Engineering Of Gold Nanoparticles For Drug Delivery, Fangchao Liu

Wayne State University Dissertations

Due to their ease of synthesis, versatile surface chemistry, ease of imaging, and biocompatibility, gold nanoparticles (AuNPs) are employed as drug delivery devices in the treatment of respiratory problems associated with spinal cord injury (SCI). We have developed a method for the synthesis of a tripartite nanoconjugate comprised of an AuNP drug carrier chemically conjugated to a transporter protein (wheat germ agglutinin coupled to horseradish peroxidase or WGA-HRP) and to potent SCI drugs. The therapeutic efficacy and biodistribution were studied in a validated animal model. Our results show that a single administration of the nanoconjugate improved diaphragmatic activity at a …

Shear Band Formation In Amorphous Materials Under Oscillatoryshear Deformation, Nikolai V. Priezjev

Mechanical and Materials Engineering Faculty Publications

The effect of periodic shear on strain localization in disordered solids is investigated using molecular dynamics simulations. We consider a binary mixture of one million atoms annealed to a low temperature with different cooling rates and then subjected to oscillatory shear deformation with a strain amplitude slightly above the critical value. It is found that the yielding transition occurs during one cycle but the accumulation of irreversible displacements and initiation of the shear band proceed over larger number of cycles for more slowly annealed glasses. The spatial distribution and correlation function of nonaffine displacements reveal that their collective dynamics changes …

Structural Relaxation Of Porous Glasses Due To Internal Stresses And Deformation Under Tensile Loading At Constant Pressure, Nikolai V. Priezjev, Maxim A. Makeev

Mechanical and Materials Engineering Faculty Publications

The time evolution of the pore size distributions and mechanical properties of amorphous solids at constant pressure is studied using molecular dynamics simulations. The porous glasses were initially prepared at constant volume conditions via a rapid thermal quench from the liquid state to the glassy region and allowing for simultaneous phase separation and material solidification. We found that at constant pressure and low temperature, the porous network becomes more compact and the glassy systems relocate to progressively lower levels of the potential energy. Although the elastic modulus and the average glass density both increase with the waiting time, their dependence …

Rare-Earth-Activated Group Vi D0 Metal Oxides As Thermosensitive Phosphors, Samarage Sameera Perera

Wayne State University Dissertations

ABSTRACT

RARE-EARTH-ACTIVATED GROUP VI d0 METAL OXIDES AS

THERMOSENSITIVE PHOSPHORS

by

SAMARAGE SAMEERA PRASAD PERERA

AUGUST 2019

Advisor: Dr. Federico A. Rabuffetti

Major: Chemistry

Degree: Doctor of Philosophy

Thermosensitive phosphors are solid-state materials that demonstrate distinct dependence of luminescence emission on temperature. These materials enable optical temperature sensing in environments where conventional thermometry is not possible (e.g., gas turbines, combustion engines, surface temperature distributions). However, the design of thermosensitive phosphors that show adequate sensitivity and low thermal quenching in the intermediate temperature range (i.e., 500–1000 K) remains challenging. This challenge can be addressed by understanding how to rationally manipulate the …

3d Textile Preforms And Composites For Aircraft Strcutures: A Review, Abbasali Saboktakin

International Journal of Aviation, Aeronautics, and Aerospace

Over the last decades, the development of 3D textile composites has been driven the structures developed to overcome disadvantages of 2D laminates such as the needs of reducing fabrication cost, increasing through-thickness mechanical properties, and improving impact damage tolerance. 3D woven, stitched, knitted and braided preforms have been used as composites reinforcement for these types of composites. In this paper, advantages and disadvantages of each of them have been comprehensively discussed. The fabric architects and their specification in particular stitched preforms and their deformation mode for aerospace applications have been reviewed. Exact insight into various types of damage in textile …

Leaching Characteristics Of Rare Earth Elements From Bituminous Coal-Based Sources, Xinbo Yang

Theses and Dissertations--Mining Engineering

The demand for rare earth elements (REEs) has increased over the last decade due to applications in high technology devices including those in the defense industry. The recovery of REEs from primary sources such as rare earth minerals are viable using physical separations followed by chemical processing. However, weak market values and environmental concerns have limited the viability of such operations. On the other hand, REE recovery from secondary sources such as apatite ore, bauxite waste, and waste recycling, provides an opportunity to take advantage of a resource that does not require mining costs as well as other associated costs …

A Total Life Cycle Approach For Developing Predictive Design Methodologies To Optimize Product Performance, Buddhika M. Hapuwatte, Ibrahim S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

Sustainable products must be designed by considering how design decisions impact their total life cycle (TLC) sustainability content. Even more so important when designing products to incorporate the technological elements of sustainable manufacturing, the 6Rs (Reduce, Reuse, Recycle, Recover, Redesign and Remanufacture), to achieve Circular Economy (CE). This paper presents the preliminary work of an ongoing research project on developing a novel framework incorporating predictive models with TLC considerations. This unique approach develops and integrates models with associated risks, and optimizes for maximizing the sustainability benefits due to design decisions. Such predictive capability is extremely useful for process planning, where …

Sustainable Production Through Balancing Trade-Offs Among Three Metrics In Flow Shop Scheduling, Amin Abedini, Wei Li, Fazleena Badurdeen, Ibrahim S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

In sustainable manufacturing, inconsistencies exist among objectives defined in triple-bottom-lines (TBL) of economy, society, and environment. Analogously, inconsistencies exist in flow shop scheduling among three objectives of minimizing total completion time (TCT), maximum completion time (MCT), and completion time variance (CTV), respectively. For continuous functions, the probability is zero to achieve the objectives at their optimal values, so is it at their worst values. Therefore, with inconsistencies among individual objectives of discrete functions, it is more meaningful and feasible to seek a solution with high probabilities that system performance varies within the …

Designing And Redesigning Products, Processes, And Systems For A Helical Economy, Ryan Bradley, Ibrahim S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

The Circular Economy (CE) concept has promised to unlock trillions of dollars in business value while driving a significant reduction in the world’s resource consumption and anthropogenic emissions. However, CE mainly lives in ambiguity in the manufacturing domain because CE does not address the changes needed across all of the fundamental elements of manufacturing: products, processes, and systems. Conceptually, CE is grounded in the concept of closed-loop material flows that fit within ecological limits. This grounding translates into a steady state economy, a result that is not an option for the significant portion of the world living in poverty. Therefore, …

Rotary Friction Welding Versus Fusion Butt Welding Of Plastic Pipes – Feasibility And Energy Perspective, Ramsey F. Hamade, Tarek R. Andari, Ali H. Ammouri, Ibrahim S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

According to the Plastics Pipe Institute, butt fusion is the most widely used method for joining lengths of PE pipe and pipe to PE fittings “by heat fusion” (https://plasticpipe.org/pdf/chapter09.pdf). However, butt-welding is not energy-cognizant from the point of view of a phase-change fabrication method. This is because the source of heating is external (heater plate). The initial heating and subsequent maintenance at relatively high temperature (above 200 C for welding of high-density polyethylene pipe) is energy intensive. Rotary friction welding, on the other hand focuses the energy where and when as needed because it uses electric motor to generate mechanical …

Cmas/Volcanic Ash Infiltration Performance Of Yttria Rich-Zirconia Thermal Barrier Coatings Produced By Electron Beam Physical Vapor Deposition, Juan Jose Gomez Chavez

Open Access Theses & Dissertations

For many years the use of thermal barrier coatings (TBC) in gas turbine engines has allowed a significant increase in engine operating temperatures which are above the Ni-based super alloys' melting point. The base material for TBCs is the state of the art 7 wt % yttria stabilized zirconia (YSZ) which provides the thermal protection. Current industry demands for increased engine efficiency has pushed TBCs to the limits where significant technological constrains have been identified. One of the main ones represents the high temperature corrosion of the TBC material due to the ingestion of silicate based airborne particles commonly referred …

Tailoring The Mechanical And Optical Properties Of Silicon-Niobium-Nitride Composite Coatings, Cristian Orozco

Open Access Theses & Dissertations

Nitride nanocomposite thin films have generated significant attention as a result of their robust mechanical properties, excellent triobology, and good chemical (corrosion) stability. Due to their excellent hardness and high wear resistance NbN coatings have found use in a wide variety of applications such as the coating of cutting tools and to strengthen the surface mechanical properties of superconducting cavities. The mechanical properties of NbN can be further improved through mixing with Si3N4, leading to the formation of a nanocomposite structure. NbN-Si3N4 nanocomposite coatings have been actively studied due to their high hardness, high elastic modulus, and high resistance to …

Exploration And Optimization Of Biomaterials And Cells Required For The Fabrication Of A "Cardiac Patch", Shweta Anil Kumar

Open Access Theses & Dissertations

Cardiac failure induced by myocardial infarction is believed to be one of the primary causes of morbidity and mortality all over the world. Affecting more than 26 million people worldwide, its prevalence has been observed to increase steadily. Myocardial infarction, which intitially begins as the occlusion of of a coronary artery, results in the death of millions of cardiomyocytes by obstructing blood flow to the serviced regions of the myocardium. The dead myocardium is replaced by a dense,collagenous scar which reduces the contractility of the heart, gradually leading to heart attacks. Most of the existing treatment therapies are palliative in …

A Study Of The Effect Of Heat Treatment On 3d Printed Pla Impact Strength, Suresh Thota

Electronic Theses and Dissertations

Environmental conditions have a significant effect on the mechanical properties of various materials. Environmental parameters such as temperature and humidity have a major impact on mechanical properties of materials such as compressive strength, tensile strength, bending strength and impact strength. The purpose of this research is to study how temperature and humidity affect the impact strength of 3D printed PLA plastic. Impact strength is the ability of a material to absorb energy subjected to an impact load by a pendulum. In this research, 3D printing was employed to produce PLA specimens which were later used for different experimental testings. For …

Mechanical Properties Of 3d Printed Acrylonitrile Styrene Acrylate, William Cahyadi

Electronic Theses and Dissertations

Several studies have been conducted on FDM 3d printed materials such as PLA (Polylactic Acid) and ABS (Acrylonitrile Butadiene Styrene), however, not for ASA (Acrylonitrile Styrene Acrylate). The use of ASA has been increasing due to its resistance to UV, heat, and some chemicals. The resistance to UV prevents the material from degrading its material properties in common outdoor conditions, whereas resistance to heat and oil prevents the material from discoloration. This combination of effects allows designers to use ASA in outdoor applications, however, material properties for ASA in the FDM 3d printing manufacturing process are not well defined. It …

Cadmium Sulfide-Buffered Pv Systems: Assessing The Environmental, Health, And Economic Impacts, Maqsood Ali Mughal, Rajesh Sharma

Journal of the Arkansas Academy of Science

As the world’s population continues to grow, global energy crises are expected to rise in the future, thus accelerating the demand for renewable energy technology, particularly solar photovoltaics. The energy sector will face an increasingly complex array of interlocking challenges - technological, environmental, health, economic, and regulatory. In this paper, we study CdS, a widely used buffer material in thin film photovoltaics, to assess and monetize environmental, health, and socio-economic externalities associated with the use of the material. Currently, CdS has a significant advantage over other alternate buffer materials in terms of efficiency and low-cost production of large-area processing of …

Performance Of Plunge Depth Control Methods During Friction Stir Welding, Jinyoung Yoon, Cheolhee Kim, Sehun Rhee

Mechanical and Materials Engineering Faculty Publications and Presentations

Friction stir welding is a preferred solid state welding process for Al/Fe joints, and in friction stir lap welding, the plunge depth is the most critical parameter for joint strength. We compared three plunge depth control methods, namely conventional position control, offset position control, and deflection compensation control in the friction stir lap welding of 3 mm-thick Al 5083-O alloy over 1.2 mm-thick DP 590 steel. The desired plunge depth was 0.2 mm into the steel sheet. However, the pin did not reach the steel surface under conventional position control due to deflection of the vertical axis of the welding …