Ulsi And Tft Technologies In Industry, Research And Higher Education In France: An Evolution Towards Innovation Resulting From Close And Sustainable Interaction,
2019
University of Rennes 1, GIP-CNFM
Ulsi And Tft Technologies In Industry, Research And Higher Education In France: An Evolution Towards Innovation Resulting From Close And Sustainable Interaction, Olivier Bonnaud
Semiconductor Technology for Ultra Large Scale Integrated Circuits and Thin Film Transistors VII (ULSIC VS TFT 7)
The semiconductor industry and associated microelectronic production began in France in the early 1980s as part of the national microelectronics plan launched by the French government to meet the needs of new economic sectors that are heavy users of microelectronic products. Indeed, microelectronic circuits, devices and systems are the key elements of the information technology field, which includes computer and communications capabilities, and application fields such as aerospace, transport, and energy, mainly. Several new technologies had to be developed, corresponding to the first advent of communication tools such as Minitel (ancestor of the web) or credit cards, which then underwent …
Mechanical Properties And Applications Of Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing,
2019
Michigan Tech
Mechanical Properties And Applications Of Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing, Matthew J. Reich, Aubrey Woern, Nagendra Gautam Tanikella, Joshua M. Pearce
Michigan Tech Publications, Part 1
Past work has shown that particle material extrusion (fused particle fabrication (FPF)/fused granular fabrication (FGF)) has the potential for increasing the use of recycled polymers in 3D printing. This study extends this potential to high-performance (high-mechanical-strength and heat-resistant) polymers using polycarbonate (PC). Recycled PC regrind of approximately 25 mm2 was 3D printed with an open-source Gigabot X and analyzed. A temperature and nozzle velocity matrix was used to find useful printing parameters, and a print test was used to maximize the output for a two-temperature stage extruder for PC. ASTM type 4 tensile test geometries as well as ASTM-approved …
The Effect Of Fabric Architecture On The Processing And Properties Of Composites Made By Vacuum Assisted Resin Transfer Molding,
2019
University of Dayton
The Effect Of Fabric Architecture On The Processing And Properties Of Composites Made By Vacuum Assisted Resin Transfer Molding, Francois Ntakobatagize, Oscar Ntakontagize, Donald A. Klosterman
Chemical and Materials Engineering Faculty Publications
The goal of this research project was to evaluate and compare the effect of fabric architecture on the processing and properties of composites made by Vacuum Assisted Resin Transfer Molding (VARTM). The fabric architectures investigated included plain weave, satin weave, and warp-knit unidirectional. The fiber types included E-glass and standard modulus carbon fiber. Flat panels were fabricated with a lab scale VARTM process using an epoxy resin system. Fabric plies were cut to 45 cm x 30 cm (18 in. x 12 in.), and the number of plies used depended on the fiber areal weight of each fabric to produce …
Conference Program,
2019
Texas A&M University, USA
Conference Program, Yue Kuo, Junichi Murota, Yasuhiro Fukunaka, Yukiharu Uraoka
Semiconductor Technology for Ultra Large Scale Integrated Circuits and Thin Film Transistors VII (ULSIC VS TFT 7)
No abstract provided.
Novel Low Shear 3d Bioreactor For The Scaled Production Of High Purity Human Mesenchymal Stem Cells,
2019
Claremont Colleges
Novel Low Shear 3d Bioreactor For The Scaled Production Of High Purity Human Mesenchymal Stem Cells, Andrew Burns
KGI Theses and Dissertations
Human mesenchymal stem cells are an ideal candidate for stem cell therapies. They have been researched since the 1960’s and can differentiate into many desired functional cell types without undergoing teratogenesis. However, higher yields are needed for a marketable, successful stem cell therapy. To accomplish this, cells will have to be cultured to expand them to therapeutically relevant dosages for multiple patients. Bioreactor production is an ideal method to solve this problem.
The aim of this thesis is to test and validate a novel bioreactor for the cultivation of human mesenchymal stem cells. In this work, we investigate a novel …
Design And Control Of Fiber Encapsulation Additive Manufacturing,
2019
Southern Methodist University
Design And Control Of Fiber Encapsulation Additive Manufacturing, Matt Saari
Mechanical Engineering Research Theses and Dissertations
This work presents the design, development, and analysis of the Fiber Encapsulation Additive Manufacturing (FEAM) system developed at the Laboratory for Additive Manufacturing Robotics \& Automation at the Lyle School of Engineering at Southern Methodist University. The innovation introduced by FEAM is the ability to insert a continuous fiber of different material into the flowing extrudate. Correctly positioning the fiber feed inside the extrudate while turning the fiber in arbitrary directions is a critical aspect of the technology. This will allow for the full exploitation of the capabilities of the FEAM technology to produce robotic components that actuate and sense. …
Using Numerical Models Of Dewatering At Coal Ash Impoundments To Understand Cost And Schedule,
2019
University of Kentucky
Using Numerical Models Of Dewatering At Coal Ash Impoundments To Understand Cost And Schedule, Peter Bell, Joel Thompson, Don Fuller
World of Coal Ash Proceedings
No abstract provided.
Investigating Ccr Units And Evaluating The Physical Properties Of Ponded Ccr,
2019
University of Kentucky
Investigating Ccr Units And Evaluating The Physical Properties Of Ponded Ccr, David Skeggs, Zahra Aghazadeh, Rachel Combs
World of Coal Ash Proceedings
No abstract provided.
Demonstration Of “No Migration” Alternative Performance Standard For Ccr Facilities In Arid To Semi- Arid Regions Using Unsaturated Zone Modeling,
2019
University of Kentucky
Demonstration Of “No Migration” Alternative Performance Standard For Ccr Facilities In Arid To Semi- Arid Regions Using Unsaturated Zone Modeling, James Aiken, Katy Lindstom
World of Coal Ash Proceedings
No abstract provided.
Coal Combustion Residuals Management Using Geotextile Containers- Considerations For Various Options,
2019
University of Kentucky
Coal Combustion Residuals Management Using Geotextile Containers- Considerations For Various Options, Randall Wilcox, Gregg Lebster, Bryan Hamilton, Thomas Stephens
World of Coal Ash Proceedings
No abstract provided.
State Vs Federal Ccr Rule Regulations: Comparisons And Impacts,
2019
University of Kentucky
State Vs Federal Ccr Rule Regulations: Comparisons And Impacts, Nicole Kron, Eric Nelson
World of Coal Ash Proceedings
No abstract provided.
Continuous, Real-Time Tss Monitoring Verifies Effluent Quality And Coal Ash Management Performance While Reducing Compliance Costs,
2019
University of Kentucky
Continuous, Real-Time Tss Monitoring Verifies Effluent Quality And Coal Ash Management Performance While Reducing Compliance Costs, Dave Fraley, Chris Bauman, Dave Donahue
World of Coal Ash Proceedings
No abstract provided.
Effect Of Coal Fly Ash On Agricultural Crops :Second Phase Showcase Project On Use Of Fly Ash In Agriculture In And Around Thermal Power Station Areas Of National
Thermal Power Corporation Ltd., India.,
2019
University of Kentucky
Effect Of Coal Fly Ash On Agricultural Crops :Second Phase Showcase Project On Use Of Fly Ash In Agriculture In And Around Thermal Power Station Areas Of National Thermal Power Corporation Ltd., India., K. Arivazhagan, M. Ravichandran, S.K. Dube, V.K. Mathur
World of Coal Ash Proceedings
No abstract provided.
Advantages Of Single Source Contracting In-Plant Ccr Services,
2019
University of Kentucky
Advantages Of Single Source Contracting In-Plant Ccr Services, Kevin Foody, Marcella Funderburg, Blake Whittington
World of Coal Ash Proceedings
No abstract provided.
Design And Construction Of A Ccr Landfill Adjacent To The Missouri River,
2019
University of Kentucky
Design And Construction Of A Ccr Landfill Adjacent To The Missouri River, Thomas Gredell, Jeffrey Fouse, Jay Ellington
World of Coal Ash Proceedings
No abstract provided.
Geochemical Tools For Groundwater Monitoring At Coal Fired Utilities,
2019
University of Kentucky
Geochemical Tools For Groundwater Monitoring At Coal Fired Utilities, Jeff Gillow, Bruce Sass, Hari Parthasarathy
World of Coal Ash Proceedings
No abstract provided.
Bottom Ash Handling Conversions – Lessons Learned,
2019
University of Kentucky
Bottom Ash Handling Conversions – Lessons Learned, Dustin Doerr
World of Coal Ash Proceedings
No abstract provided.
Encapsulation Of Thermoevaporation Brines Using Coal Combustion Residuals,
2019
University of Kentucky
Encapsulation Of Thermoevaporation Brines Using Coal Combustion Residuals, Dale Prentice, Kirk Ellison, Gaurav Sant
World of Coal Ash Proceedings
No abstract provided.
Recycling Of Coal Ash In Agriculture: Use Of Vermicomposting Biotechnology,
2019
University of Kentucky
Recycling Of Coal Ash In Agriculture: Use Of Vermicomposting Biotechnology, G.N. Chattopadhyay, Gourab Roy, Wasim Iftikar
World of Coal Ash Proceedings
No abstract provided.
Surface Water And Groundwater Mixing In Alluvial Floodplains: A Significant Issue For Understanding Contaminant Transport At Coal Ash Facilities Adjacent To Rivers,
2019
University of Kentucky
Surface Water And Groundwater Mixing In Alluvial Floodplains: A Significant Issue For Understanding Contaminant Transport At Coal Ash Facilities Adjacent To Rivers, Joel Thompson, Peter Bell, John Griggs
World of Coal Ash Proceedings
No abstract provided.
