Coordination Compounds Of Copper, Cobalt And Nickel Formates With Formamide And Carbamide,
2020
Urgench State University
Coordination Compounds Of Copper, Cobalt And Nickel Formates With Formamide And Carbamide, Jumaniyazova Mukaddas, Azizov Tohir
CHEMISTRY AND CHEMICAL ENGINEERING
The synthesis of mixed ligand coordination compounds of copper, cobalt and nickel formates with formamide and urea in an aqueous solution was carried out. The metal content in the complexes was determined by complexometric titration. Using IR spectroscopy, it was proved that the coordination of formamide and urea with the complexing atom is carried out through the oxygen atom of the carbonyl group. The absorption spectrum of coordinated water is also present in the IR spectrum. The nature of the change in the frequency of stretching vibrations of the –OH group in the composition of water indicates its location in …
Configuration And Competitive Reactivity Of Ligands In Mixed Ligand Complexes Of Dialkylditiophosphates And Aminobenbenzimidazole (Part I: Au, Pt, Ag),
2020
State Enterprise “Uzbek-Japanese Youth Innovation Center”
Configuration And Competitive Reactivity Of Ligands In Mixed Ligand Complexes Of Dialkylditiophosphates And Aminobenbenzimidazole (Part I: Au, Pt, Ag), Esbergenova Botakoz, Daminova Shakhlo, Kadirova Zuhra, Sharipov Khasan
CHEMISTRY AND CHEMICAL ENGINEERING
With the aim of determination of electronic and geometrical structures of mixed-ligand complexes, theoretical modeling of the structures of coordination compounds of transition metals with dialkyldithiophosphate chelating ligands with aminobenzimidazoles carried out using quantum chemical methods. Using BIOVIA Materials Accelrys Studio 2017 software packages, the geometry, electron density distribution, and frontier orbitals calculated for the mixed ligand complexes of Au(III), Pt(II), Ag(I), Cu(II), Ni(II), Fe(III), which are necessary for understanding the electronic structure of coordination compounds with chelating ligands.
Educational Cluster - Foundation Of The National Economy And Regional Innovation System,
2020
Tashkent Chemical-Technological Institute
Educational Cluster - Foundation Of The National Economy And Regional Innovation System, Usmonov Botir, Kushiev Khabibjon
CHEMISTRY AND CHEMICAL ENGINEERING
The paper analyzes the available resources for the creation of a cluster approach to the integration of education, science and industry in order to create a mechanism to bring the development of the economy to the level of modern requirements. The article describes the collaboration of science, education and industry through the clustering process. Ways to introduce clustering in the national innovation system are described. At the same time, the role of the integration of education, science and industry with the elements of the National Innovation System is analyzed. In conclusion, the role of the education cluster in the regional …
The Impact Of Composition And Morphology On Ionic Conductivity Of Silk/Cellulose Bio-Composites Fabricated From Ionic Liquid And Varying Percentages Of Coagulation Agents.,
2020
Rowan University
The Impact Of Composition And Morphology On Ionic Conductivity Of Silk/Cellulose Bio-Composites Fabricated From Ionic Liquid And Varying Percentages Of Coagulation Agents., Bailey Blessing, Cory Trout, Abneris Morales, Karleena Rybacki, Stacy A Love, Guillaume Lamoureux, Sean M O'Malley, Xiao Hu, David Salas-De La Cruz
College of Science & Mathematics Departmental Research
Blended biocomposites created from the electrostatic and hydrophobic interactions between polysaccharides and structural proteins exhibit useful and unique properties. However, engineering these biopolymers into applicable forms is challenging due to the coupling of the material’s physicochemical properties to its morphology, and the undertaking that comes with controlling this. In this particular study, numerous properties of the Bombyx mori silk and microcrystalline cellulose biocomposites blended using ionic liquid and regenerated with various coagulation agents were investigated. Specifically, the relationship between the composition of polysaccharide-protein bio-electrolyte membranes and the resulting morphology and ionic conductivity is explored using numerous characterization techniques, including scanning …
Influence Of Deposition Temperature On Properties Of Multilayered Gallium Doped Zinc Oxide Films Prepared By Dc Magnetron Sputtering Technique,
2020
Department of Physics, CoNAS, University of Dar es Salaam
Influence Of Deposition Temperature On Properties Of Multilayered Gallium Doped Zinc Oxide Films Prepared By Dc Magnetron Sputtering Technique, Elisante Maloda, Anayesu Malisa
Tanzania Journal of Science
Multilayered transparent conducting films based on ZnO: Ga were deposited onto glass substrate by DC magnetron sputtering technique. The films were prepared from alloy (Zn: Ga) and ceramic (ZnO: Ga) targets with gallium composition of 3 at% and 4 at%, respectively. Crystal structure and phase analysis were measured using X-ray diffractometer (XRD). The XRD structural analysis results indicated that all multilayered films were polycrystalline with (002) orientation slightly shifted of diffracting angles due to gallium dopant concentrations as increase in the deposition temperatures. The films were hexagonal wurtzite structure, having preferred growth orientation in c-axis perpendicular to the substrate surface. …
Preparations Of Nano-MnoX/Ti Electrocatalytic Membrane Electrode For Catalytic Oxidation Of Cyclohexane Using Intermittent Electrodeposition,
2020
1. State Key Laboratory of Separation Membranes and Membrane Processes, School of Materials Science and Engineering, Tianjin Polytechnic University, Tianjin 300387, P. R. China;
Preparations Of Nano-MnoX/Ti Electrocatalytic Membrane Electrode For Catalytic Oxidation Of Cyclohexane Using Intermittent Electrodeposition, Xue Zhou, Hong Wang, Zhen Yin, Yu-Jun Zhang, Jian-Xin Li
Journal of Electrochemistry
Cyclohexanone and cyclohexanol (KA oil) obtained from highly selective oxidation of cyclohexane (CHA) show important industrial value and application prospects. In this work, the intermittent electrodeposition was developed to prepare nano-MnOx catalyst loading porous tubular titanium membrane electrode (MnOx/Ti), which was employed to constitute an electro-catalytic membrane reactor (ECMR) for the oxidation of cyclohexane to produce cyclohexanol and cyclohexanone. The surface morphology, crystal structure and electrochemical property of the catalysts were characterized by FESEM, XRD and electrochemical workstation, respectively. The results show that the catalyst prepared by the intermittent electrodeposition displayed nano-flower-like γ-MnO2. Compared with …
Preparation Of Α-Hydroxylated Acetal From 2-Butanone By Indirect Electrooxidation,
2020
State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China;
Preparation Of Α-Hydroxylated Acetal From 2-Butanone By Indirect Electrooxidation, Hai-Qing Huang, Ye Miao, Xin-Sheng Zhang
Journal of Electrochemistry
Acetoin (3-hydroxy-2-butanone) is an important food spice. As a platform compound, it is widely used in medicine, tobacco, cosmetics, chemical material and other industries. In this paper, α-hydroxylated acetal, an intermediate of acetoin, was prepared from 2-butanone by indirect electrooxidation in the plate and frame electrolytic cell, in which graphite plates were used as both an anode and a cathode, while KOH as an electrolyte and KI as a catalyst. Acetoin could be prepared by hydrolysis in acidic aqueous solution from acetoin intermediate. The effects of current density, electrolyte flow rate between the plates, 2-butanone concentration and electrolysis temperature …
Electrochemical Response Of A Single Wire-Electrode Ac Probe In 3.5wt.% Nacl,
2020
1. Center for Marine Materials Corrosion and Protection, College of Materials, Xiamen University,Xiamen 361005, Fujian, China;
Electrochemical Response Of A Single Wire-Electrode Ac Probe In 3.5wt.% Nacl, Zhen-Wen Zou, Da-Jiang Zheng, Zi-Ming Wang, Guang-Ling Song
Journal of Electrochemistry
In this paper, a recently developed single wire-electrode AC probe technology which does not need a reference or counter electrode was employed to investigate the electrochemical corrosion and sacrificial anode protection behaviors of steel and zinc in 3.5wt.% NaCl. With this simple, fast, reliable and stable probe, the instantaneous corrosion rate and accumulated corrosion loss of carbon steel in 3.5wt.% NaCl were measured, and the results revealed that both were greater than those of zinc. Furthermore, the observed different corrosion behaviors between carbon steel and zinc during the immersion could be caused by their different surface films. With the galvanic …
The Interaction Of Ternary Components Of Ionic Liquid Gel Polymer Electrolytes For Lithium Metal Batteries,
2020
1. School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001,Heilongjiang;
The Interaction Of Ternary Components Of Ionic Liquid Gel Polymer Electrolytes For Lithium Metal Batteries, Xiao-Na Pan, Li-Lai Liu, Zhi-Pu Wang, Dan Wang, Yun Li, Pei-Xia Yang, Jin-Qiu Zhang, Mao-Zhong An
Journal of Electrochemistry
Ionically conductive gel polymer electrolyte is an excellent candidate due to its inflammable, nonvolatile and high thermal stability as compared to commercial liquid electrolytes which are usually flammable, volatile, and containing toxic organic solution as solvent, The synthesis and application of ionic gel polymer electrolytes in lithium ion/metal batteries have been previously reported. However, the interaction effects of N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide (PP13TFSI) ionic liquid (as plasticizer) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) on PVDF-HFP polymer remain unclear. In this work, the molecular structure of ionic liquid gel polymer electrolyte (ILGPE) composed of PP13TFSI, LiTFSI and PVDF-HFP was studied by Raman spectroscopy and Fourier-transform …
Electrochemical Oxidation Of Metal Chromium In Odium Hydroxide Aqueous Solution,
2020
1. Key Laboratory of Comprehensive and Highly Efficient Utilization of Salt Lake Resources, Qinghai Institute of Salt Lakes, Chinese Academy of Sciences, Xining 810008, China;2. Qinghai Engineering and Technology Research Center of Salt Lake Resources Development, Xining 810008, China;3. University of Chinese Academy of Sciences, Beijing 100049, China;
Electrochemical Oxidation Of Metal Chromium In Odium Hydroxide Aqueous Solution, Ping Han, Hai-Tao Feng, Ya-Ping Dong, Sen Tian, Bo Zhang, Wu Li
Journal of Electrochemistry
Ferrochrome electrolysis technology is a novel method for preparing sodium chromate (Na2CrO4). Although the method performs well at soft reaction conditions, controllable process, environmentally friendly production process, etc., the electrochemical oxidation process of metal chromium in NaOH aqueous electrolyte is still unclear. At present, there are few research articles about specific electrochemical oxidation of metal chromium in NaOH aqueous electrolyte. It is, therefore, meaningful to carry out the research in electrochemical oxidation mechanism of chromium. The electrochemical oxidation of metal chromium in 0.01 mol·L-1 ~ 10 mol·L-1 NaOH aqueous electrolytes at 20 °C was …
Ordered Mesoporous Carbon/Graphene/Nickel Foam For Flexible Dopamine Detection With Ultrahigh Sensitivity And Selectivity,
2020
1. Department of Electronic Engineering, Shanghai Jiao Tong University, Shanghai, 200240, P. R. China;
Ordered Mesoporous Carbon/Graphene/Nickel Foam For Flexible Dopamine Detection With Ultrahigh Sensitivity And Selectivity, Lai-Yu Wang, Xin Xi, Dong-Qing Wu, Xiong-Yu Liu, Wei Ji, Rui-Li Liu
Journal of Electrochemistry
Electro-catalytic reduction is an efficient way to achieve resourcable transformation of CO2, which is one of the important techniques to solve the global environmental problems originated from excessive CO2 emission. In this study, a membrane electrode assembly(MEA) type CO2 electro-reduction electrolytic cell was constucted, which enables CO2 feeding and real-time KHCO3 aqueous updating on both sides of the cathode gas diffusion electrode (GDE). By means of the electrolytic cell, effects of KHCO3 concentration and updating inside the liquid electrolytic chamber on CO2 electro-reduction activity, production distribution and stability were investigated. The experimental …
Poly(Ethylene Oxide) Based Polymer Electrolytes For All-Solid-State Li-S Batteries,
2020
College of Energy, Xiamen University, Xiamen 361005, Fujian, China;
Poly(Ethylene Oxide) Based Polymer Electrolytes For All-Solid-State Li-S Batteries, Xue Li, Zheng-Liang Gong
Journal of Electrochemistry
In recent years, research on lithium-sulfur (Li-S) batteries has received much attention because the sulfur positive electrode and the lithium metal negative electrode produce a high theoretical specific capacity (lithium metal ~ 3800 mAh·g-1, sulfur ~ 1675 mAh·g-1). In addition, sulfur is considered to be the most promising cathode material for secondary lithium batteries, due to its advantages of low price and environmental friendly. However, the practical application of conventional liquid Li-S batteries is still obstructed by several critical issues, such as lithium ploysulfides shuttle effect, long-term stability of lithium metal anode with organic liquid electrolytes, …
Synthesis And Raman Study Of Hollow Core-Shell Ni1.2Co0.8P@N-C As An Anode Material For Sodium-Ion Batteries,
2020
1. College of Physical Science and Technology, Xiamen University, Xiamen 361005, Fujian, China;
Synthesis And Raman Study Of Hollow Core-Shell Ni1.2Co0.8P@N-C As An Anode Material For Sodium-Ion Batteries, Jia-Hui Chen, Xiao-Bin Zhong, Chao He, Xiao-Xiao Wang, Qing-Chi Xu, Jian-Feng Li
Journal of Electrochemistry
With the increasing demand for large-scale energy storage, great progress has been made in discovering new advanced energy storage materials. Sodium-ion batteries (SIBs) have attracted much attention in recent years due to their use of abundant sodium resources and their comparable electrochemical capacity to lithium-ion batteries (LIBs). In this paper, we developed novel hollow core-shell Ni-Co bimetallic phosphide nanocubes with N-doped carbon coatings (Ni1.2Co0.8P@N-C) as the anode material for SIBs. The material was synthesized through a low-temperature phosphorization method using resorcinol formaldehyde (RF) resin coating with a Ni-Co Prussian blue analogue (PBA) as a template and …
Stability Studies For A Membrane Electrode Assembly Type Co2 Electro-Reduction Electrolytic Cell,
2020
1. School of Chemical Engineer, Dalian University of Technology, Dalian 116024, China;
Stability Studies For A Membrane Electrode Assembly Type Co2 Electro-Reduction Electrolytic Cell, Qing Mao, Bing-Yu Li, Wei-Yun Jing, Jian Zhao, Song Liu, Yan-Qiang Huang, Zhao-Long Du
Journal of Electrochemistry
Electro-catalytic reduction is an efficient way to achieve resourcable transformation of CO2, which is one of the important techniques to solve the global environmental problems originated from excessive CO2 emission. In this study, a membrane electrode assembly(MEA) type CO2 electro-reduction electrolytic cell was constucted, which enables CO2 feeding and real-time KHCO3 aqueous updating on both sides of the cathode gas diffusion electrode (GDE). By means of the electrolytic cell, effects of KHCO3 concentration and updating inside the liquid electrolytic chamber on CO2 electro-reduction activity, production distribution and stability were investigated. The experimental …
Degradation Mechanism Of Lini0.83Co0.12Mn0.05O2 Cycled At 45 ℃,
2020
Tianjin Lishen Battery Joint-Stock Co., Ltd. Tianjin 300384, China;
Degradation Mechanism Of Lini0.83Co0.12Mn0.05O2 Cycled At 45 ℃, Hong-Yun Ma, Xiao-Hui Yao, Meng-Yao Miao, Yang Yi, Shao-Zhong Wu, Jiang Zhou
Journal of Electrochemistry
Nickel-rich layered material has been considered as the most promising one for lithium ion batteries due to its high specific capacity. To further improve the lifetime performance, it is significant to investigate the degradation mechanisms deeply. In this study, the degradation mechanism of NCM811 (LiNi0.83Co0.12Mn0.05O2) being cycled at 45oC was systematically researched. Electrochemical impedance spectrum (EIS) results showed that the SEI resistance (RSEI) and charge transfer resistance (Rct) went up to 83.41% and 211.34% before and after the NCM811 material being cycled at 45oC, …
Open-Source Digitally Replicable Lab-Grade Scales,
2020
Michigan Technological University
Open-Source Digitally Replicable Lab-Grade Scales, Benjamin R. Hubbard, Joshua M. Pearce
Michigan Tech Publications, Part 1
This study provides designs for a low-cost, easily replicable open-source lab-grade digital scale that can be used as a precision balance. The design is such that it can be manufactured for use in most labs throughout the world with open-source RepRap-class material extrusion-based 3-D printers for the mechanical components and readily available open-source electronics including the Arduino Nano. Several versions of the design were fabricated and tested for precision and accuracy for a range of load cells. The results showed the open-source scale was found to be repeatable within 0.05 g with multiple load cells, with even better precision (0.005 …
Reprapable Automated Open Source Bag Valve Mask-Based Ventilator,
2020
Michigan Technological University
Reprapable Automated Open Source Bag Valve Mask-Based Ventilator, Aliaksei Petsiuk, Nagendra Gautam Tanikella, Samantha C. Dertinger, Adam Pringle, Shane Oberloier, Joshua M. Pearce
Michigan Tech Publications, Part 1
This study describes the development of an automated bag valve mask (BVM) compression system, which, during acute shortages and supply chain disruptions can serve as a temporary emergency ventilator. The resuscitation system is based on the Arduino controller with a real-time operating system installed on a largely RepRap 3-D printable parametric component-based structure. The cost of the system is under $170, which makes it affordable for replication by makers around the world. The device provides a controlled breathing mode with tidal volumes from 100 to 800 milliliters, breathing rates from 5 to 40 breaths/minute, and inspiratory-to-expiratory ratio from 1:1 to …
Additive Manufactured And Laser Enhanced Optical Fiber On Flexible Kapton Substrate,
2020
University of South Florida
Additive Manufactured And Laser Enhanced Optical Fiber On Flexible Kapton Substrate, Dianhao Hou
USF Tampa Graduate Theses and Dissertations
This thesis mainly focuses on the realization of laser enhancing additive manufactured optical fibers on the flexible substrate based on previous work on the rigid surface, and the exploration of their loss at different bend status by optical transmission test. Optical fibers are successfully fabricated using polymethyl methacrylate by fused deposition modeling technology within Norland Optical Adhesive 1369 which is chosen as the cladding material and micro-dispensed on the Kapton substrate. The Laser cutting technology and scanning electron microscope have been used to enhance and characterize the flatness of two end facets of samples, respectively. The optical adhesive and PMMA …
Van Der Waals Epitaxy Of Ultrathin Early Transition Metal (Ti & V) (Di)Selenides: Charge And Magnetic Order In The Ultrathin Limit,
2020
University of South Florida
Van Der Waals Epitaxy Of Ultrathin Early Transition Metal (Ti & V) (Di)Selenides: Charge And Magnetic Order In The Ultrathin Limit, Manuel Bonilla Lopez
USF Tampa Graduate Theses and Dissertations
Since the isolation of graphene in 2004, two-dimensional (2D) layered materials, specially the transition metal dichalcogenides (TMDs), have attracted immense interest from theoreticians and experimentalist due to the diversity of properties presented in this family of materials. The main reason for the interest in such materials has been the observation of emergent properties as a consequence of the reduced dimensions, i.e. the monolayer regime. Initially the monolayer regime was obtained via the scotch-tape method. The implementation of exfoliation techniques was successful since layered 2D materials are composed of stacked layers held together by weak van der Walls forces that permits …
Simultaneous Effects Of Rice Husk Silica And Silicon Carbide Whiskers On The Mechanical Properties And Morphology Of Sodium Geopolymer,
2020
New York City College of Technology
Simultaneous Effects Of Rice Husk Silica And Silicon Carbide Whiskers On The Mechanical Properties And Morphology Of Sodium Geopolymer, Akm Rahman, Chirag Shah, Nihkil Gupta
Publications and Research
The current research is focused on developing a geopolymer binder using rice husk ash–derived silica nanoparticles. Four types of rice husks were collected directly from various rice fields of Bangladesh in order to evaluate the pozzolanic activity and compatibility of the derived rice husk ashes with precursors of sodium-based geopolymers. Silicon carbide whiskers were introduced into sodium-based geopolymers in order to evaluate the response of silicon carbide whiskers to the interfacial bonding and strength of sodium-based geopolymers along with rice husk ashes. Compression, flexural and short beam shear tests were performed to investigate the synergistic effect of rice husk ashes–derived …
