Method To Provide Meta-Stable Operation Of Dc Microgrid Comprising A Pulsed Load,
2018
Michigan Technological University
Method To Provide Meta-Stable Operation Of Dc Microgrid Comprising A Pulsed Load, David G. Wilson, Wayne Weaver, Rush D. Robinett Iii, Ronald Matthews, Steven F. Glover
Michigan Tech Patents
A Hamiltonian surface shaping power flow control (HSSPFC) method is used to analyze the meta-stability and adjust pulsed power loads on a DC electric power distribution network. Pulsed power loads are nonlinear, time-variant systems that cause nonlinear limit-cycles. During the on periods of a pulsed load, the system can be in an unstable state and is damped back to stability during the off state of the load. Therefore, over the entire period of the pulse the system may only be assessed as meta-stable. As shown through simulation, HIL and hardware results, the HSSPFC method is more accurate than the other …
A Study Of The Diffusion Characteristics Of Tungsten Bar Stock And Tungsten Produced Via Direct Metal Laser Sintering (Dmls),
2018
Marquette University
A Study Of The Diffusion Characteristics Of Tungsten Bar Stock And Tungsten Produced Via Direct Metal Laser Sintering (Dmls), Jonathan Robert Bruss
Master's Theses (2009 -)
Using a vacuum hot extraction method diffusivity and concentration of hydrogen were measured in samples of tungsten bar stock and direct metal laser sintered (DMLS) tungsten. It was found that the tungsten bar stock closely adhered to the model established by Frauenfelder. The DMLS samples approximately follow a downward sloping trend over the 500K-1200K temperature range. The trend is opposite of what is expected suggesting processing has a major effect on diffusion behavior. A CFD model was created using ANSYS Fluent to simulate the diffusion behavior. The model functions by separating out diffusion mechanisms and solving Fick’s law with each …
Modeling Sulfate Attack In Modern Concrete For Building Sustainable And Resilient Infrastructure,
2018
Texas A&M University
Modeling Sulfate Attack In Modern Concrete For Building Sustainable And Resilient Infrastructure, Zachary Grasley
Publications
External sulfate attack is a complex phenomenon and is manifested in the form of large expansion, cracking, and spalling depending on the exposure solution and material constituent properties. Several models were developed in the past to demonstrate sulfate attack mechanisms that account for the diffusion of sulfate ions into the porous concrete and the successive deformation triggered by the chemical reaction and precipitation of expansive agents. However, none of these models accounts for the effect of the migration of solvent water from the low solute concentration solution to high solute concentration solution driven by the osmotic pressure. Osmotic pressure is …
Current-Driven Production Of Vortex-Antivortex Pairs In Planar Josephson Junction Arrays And Phase Cracks In Long-Range Order,
2018
Old Dominion University
Current-Driven Production Of Vortex-Antivortex Pairs In Planar Josephson Junction Arrays And Phase Cracks In Long-Range Order, Francisco Estellés-Duart, Miguel Ortuño, Andrés M. Somoza, Valerii M. Vinokur, Alex Gurevich
Physics Faculty Publications
Proliferation of topological defects like vortices and dislocations plays a key role in the physics of systems with long-range order, particularly, superconductivity and superfluidity in thin films, plasticity of solids, and melting of atomic monolayers. Topological defects are characterized by their topological charge reflecting fundamental symmetries and conservation laws of the system. Conservation of topological charge manifests itself in extreme stability of static topological defects because destruction of a single defect requires overcoming a huge energy barrier proportional to the system size. However, the stability of driven topological defects remains largely unexplored. Here we address this issue and investigate numerically …
Experimental Tests And Numerical Simulations For Failure Investigation On Corrugated Boxes Used On Household Appliance Packaging,
2018
Whirlpool Latin America
Experimental Tests And Numerical Simulations For Failure Investigation On Corrugated Boxes Used On Household Appliance Packaging, Diego Fernandes Rodrigues, José Carlos Pereira
Journal of Applied Packaging Research
Packages made of corrugated paper are fundamental to the protection, transportation and handling of the appliance product market. During the storage and sales stages of a product, the package must resist compressive loads in different directions beyond moderate impacts. In this context, the objective of this work is to develop and implement a post-processor that allows the simultaneous analysis of two of the most common failure modes of packages made of corrugated paper: failure due to tensile or compressive stress limit, and failure due to local buckling, when the buckling of the faces of the corrugated paper between two peaks …
Nanoflower-Like Bi2moo6/Ag3po4 In Water Treatment,
2018
University of Nevada, Las Vegas
Nanoflower-Like Bi2moo6/Ag3po4 In Water Treatment, Xavier Morgan-Lange, Jaeyun Moon, Kaleab Ayalew
McNair Poster Presentations
• Environmental issues continue to intensify causing natural resources such as clean water to become increasingly scarce while demand only continues to grow. • Some of the most effective measures taken appear to be bioremediation tactics and their synthetic counterparts. • A critical area of interest are semi-conducting photocatalytic nanomaterials that take advantage of the photo-electric effect and use the introduction of ultra violet (UV) and visible light to induce oxidation and reduction reaction in p-type semiconductors. This results in the decomposition of certain pollutants and/or deactivates certain microbes in water. • These materials have the potential to operate using …
Post-Wrapping Behavior Of High-Performance Stretch Film,
2018
Atlantic Packaging
Post-Wrapping Behavior Of High-Performance Stretch Film, Jake Wyns, John Cook, Kyle Dunno
Journal of Applied Packaging Research
Compressive force is the energy a stretch film exerts onto the corners of a unit load of product, this paper analyzes the effects of compressive force overtime after application to a unit load. Previous research has shown how storage conditions, pallet configurations, and storage duration affect the performance of various packaging materials, however, there is a lack of this type of study relating to stretch film and load unitization. This paper looks at trends in compressive force depending on whether a film is applied with negative or positive secondary stretch. When a load is stretch wrapped with negative secondary stretch, …
Strong And Tough Continuous Nanofibers,
2018
Lincoln, NE
Strong And Tough Continuous Nanofibers, Yuris Dzenis
Department of Mechanical and Materials Engineering: Faculty Publications
Amethod of fabricating a continuous nanofiber is described . The method includes preparing a solution of one or more polymers and one or more solvents and electrospinning the solution by discharging the solution through one or more liquid jets into an electric field to yield one or more continuous nanofibers . The electrospinning process ( i ) highly orients one or more polymer chains in the one or more continuous nanofibers along a fiber axis of the one or more continuous nanofibers , and ( ii ) suppresses polymer crystallization in the one or more continuous nanofibers . The one …
Me-Em Enewsbrief, September 2018,
2018
Michigan Technological University
Me-Em Enewsbrief, September 2018, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University
Department of Mechanical and Aerospace Engineering eNewsBrief
No abstract provided.
Complex Coordination Silver Electrocrystallization Mechanism On Glassy Carbon Electrode Surface,
2018
State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, Fujian, China;
Complex Coordination Silver Electrocrystallization Mechanism On Glassy Carbon Electrode Surface, Shuai-Shuai Huang, Cheng Liu, Lei Jin, Fang-Zu Yang, Zhong-Qun Tian, Shao-Min. Zhou
Journal of Electrochemistry
Cyclic voltammetry and potential step methods were successfully used to study the electrochemical crystallization mechanism of silver deposition on glassy carbon electrode (GCE) in the practical cyanide-free silver plating electrolyte containing composite complexing agents. Scharifker-Hill (SH) theory was used to fitting the experimental data. The results showed that the electrodeposition of silver is a diffusion controlled irreversible electrode process according to three-dimensional instantaneous nucleation mechanism. When the step potential shifted from -750 mV to -825 mV, the peak deposition current Im was increased, while the induced nucleation time tm shortened. The calculated kinetic parameters showed that the diffusion coefficient (D) …
Preparation And Characterization Of Self-Supporting Flexible Nitrogen-Doped Carbon Fabric Electrodes,
2018
Fundamental Experimental Chemistry Center, Donghua University, Shanghai 201620, China;
Preparation And Characterization Of Self-Supporting Flexible Nitrogen-Doped Carbon Fabric Electrodes, Bo Yang, Zhi-Hang Jin, Ya-Ping Zhao, Zai-Sheng Cai
Journal of Electrochemistry
With the wide applications of intelligent wearable devices in various fields, developing a new generation of flexible energy storage devices has become a major challenge for the current technology. As a wide application of wearable flexible substrate, cotton fabric has the advantages over low price, non-toxic and environmental friendly, but the poor conductivity becomes a major problem limiting its development. As a nitrogen-containing conducting polymer, polypyrrole is traditionally used as electrode materials, but poor mechanical performance and cycle stability severely limit its application in electrode materials. In this article, a self-supporting flexible nitrogen-doped carbon fabric electrode was prepared by in …
Hybrid Battery-Capacitor System Based On Liti5O12 Anode And Ptpan Cathode,
2018
1. Department of Chemistry, Fudan University, Shanghai 200438, China;
2. Shanghai Elect Group Co Ltd, Center Academy, Shanghai 200070, China;
Hybrid Battery-Capacitor System Based On Liti5O12 Anode And Ptpan Cathode, Xiu-Li Su, Xiao-Li Dong, Yao Liu, Yong-Gang Wang, Ai-Shui Yu
Journal of Electrochemistry
Owing to its high safe, high rate and long life characteristics, lithium titanate (Li4Ti5O12) anode material has attracted extensive attention in recent years, and many efforts are being made to develop the Li4Ti5O12 based high performance hybrid supercapacitors and Li-ion batteries. Herein, we prepared the organic cathode material polytriphenylamine (PTPAn) through chemical oxidation and polymerization of triphenylamine (TPAn), and investigated its charge storage mechanism and electrode kinetics withthe typical electrochemical methods in an organic electrolyte. It was demonstrated that the PTPAn exhibited the reversible capacity of 85 mA·g-1 …
Electrochemical Performances Of Neodymium Doped Lead Dioxide Composite Anode,
2018
Key Laboratory of Estuarine Ecological Security and Environmental Health, Fujian Province University; School of Environmental Science and Engineering, Xiamen University Tan Kah Kee College, Zhangzhou 363105, Fujian, China;
Electrochemical Performances Of Neodymium Doped Lead Dioxide Composite Anode, Hong-Hui Wang, Ming-Jie Ma, Jie Feng, Huang-Ya Kang, Wen-Jie Huang
Journal of Electrochemistry
Neodymium (Nd) doped titanium (Ti)-based lead dioxide (PbO2) composite anode was prepared by electrodeposition. The surface morphologies and crystal structures of the as-prepared anodes were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD) technique, respectively. The electrochemical performances of PbO2-Nd anode were studied by electrochemical impedance spectroscopy, linear sweep voltammetry and cyclic voltammetry. Additionally, the electrocatalytic activity and durability of PbO2-Nd anode were investigated through the degradation of simulative refractory organic wastewater of phenol. The results showed that Nd doping made the PbO2 anode surface structure dense and uniform with smaller …
Assemblies And Properties Of Asymmetric Supercapacitors Based On Wo3/Carbon Cloth,
2018
Key Laboratory of Catalysis and Materials Science of the State Ethnic Affairs Commission and Ministry of Education, Hubei Province, South-Central University for Nationalities, Wuhan 430074, Hubei,China;
Assemblies And Properties Of Asymmetric Supercapacitors Based On Wo3/Carbon Cloth, Wen-Ke Shao, Lei Zhao, Chao Liu, Yan-Ying Dong, Yuan-Jie Zhu, Qiu-Fan Wang
Journal of Electrochemistry
The demand for a new generation of flexible, portable, and high-capacity power sources increases rapidly with the development of advanced wearable electronic devices. One dimensional (1D) nanowires structures have been demonstrated as one of the most ideal electrode materials in energy storage systems due to their advantages in both micorstructures and their high surface areas. Here we report a simple process for large-scale fabrication of self-standing composite film electrodes composed of WO3 nanorods on carbon cloth. In order to improve the energy density of supercapacitor, we assembled an asymmetric supercapacitor using WO3 nanorods and activated carbon cloth as …
Preparations Of Nano-Manganite Loaded Titanium Electocatalytic Membrane Electrode For Phenolic Wastewater Treatment,
2018
State Key Laboratory of Separation Membranes and Membrane Processes, School of Materials Science and Engineering, Tianjin Polytechnic University, Tianjin 300387, China;
Preparations Of Nano-Manganite Loaded Titanium Electocatalytic Membrane Electrode For Phenolic Wastewater Treatment, Le Li, Hong Wang, Rong-Hua Ma, Hong-Sen Hui, Xiao-Ping Liang, Jian-Xin Li
Journal of Electrochemistry
Nano-manganese oxide loaded on titanium electrocatalytic membrane electrodes (nano-MnOx/Ti) were synthesized bysol-gel method using porous Ti membrane as a substrate and the manganese acetate as a raw material without releasing NOx. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Field-emission scanning electron microscopy (FESEM) were employed to characterize crystal form, valence state and surface morphology of nano-MnOx, respectively. Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronoamperometry (CA) were used to investigate the electrochemical properties of nano-MnOx electrode. The results indicated that the MnOx catalysts consisted of γ-MnO2 and Mn2 …
Electrochemical Preparation And Photo-Electro Catalytic Properties Of Flexible Znni/Al-Ldhs/Carbon Fibers Composite,
2018
Anhui Key Lab of Controllable Chemical Reaction & Material Chemical Engineering, School of Chemistry and Chemical Engineering, Hefei University of Technology, Hefei 230009, Anhui, China;
Electrochemical Preparation And Photo-Electro Catalytic Properties Of Flexible Znni/Al-Ldhs/Carbon Fibers Composite, Jing-Jing Tian, Tao Chen, Xing-Chen Bao, Meng-Xu Gao, Ye-Xiao Yu, Si-Yao Peng, Guan-Ping Jin
Journal of Electrochemistry
In this work, a promising flexible composite consisting of zinc (Zn), nickel (Ni) and aluminum (Al) layered double hydroxide coated carbon fibers (ZnNi/Al-LDHs/CFs) was prepared by electrochemical method with convenient recovery and separation. The structures, morphologies, and photo-electro catalytic properties of ZnNi/Al-LDHs/CFs were characterized by X-ray diffraction, infrared spectroscopy, field emission scanning electron microscopy, inductively coupled plasma atomic emission spectrometry and electrochemical impedance spectroscopy techniques. The excellent photo-electro bifunctional catalytic properties were obtained with the ZnNi/Al-LDHs/CFs composite as compared to that of Zn/Al-LDHs/CFs (photo catalyst) or Ni/Al-LDHs/CFs (electrocatalyst) alone, which could be used in the electro-catalytic oxidations of methanol and …
An Aqueous All-Metal Oxide Asymmetric Supercapacitor With High Gravimetric And Volumetric Energy Densities,
2018
School of Materials Science and Engineering, Ocean University of China, Qingdao 266100, Shandong, P. R. China;Qingdao Center of Resource Chemistry & New Materials, Qingdao 266000, P.R. China;
An Aqueous All-Metal Oxide Asymmetric Supercapacitor With High Gravimetric And Volumetric Energy Densities, Xin Jing, Xu Zhang, Wei Wang, Jun-Wei Lang
Journal of Electrochemistry
Only with both high gravimetric and high volumetric energy densities, can supercapacitors find more extensive applications.In this paper, by making good use of the interesting nanostructures and the high packing densities of RuO2 (nanoshpheres,1.69 g·cm-3) and Co-Ni oxide (nanoflakes, 2.14 g·cm-3), the RuO2//KOH//Co-Ni oxide all-metal oxide asymmetric supercapacitors with high performance were successfully fabricated, which led to the maximum specific capacitance of 217.5 F·g-1 (412.3 F·cm-3) and specific energy density of 61.8 Wh·kg-1 (121 Wh·L-1) in a cell voltage between 0 and 1.5 V in KOH electrolyte. …
Highly Crystalline Nickel Borate Nanorods As Oxygen Evolution Reaction Electrocatalysts,
2018
State Grid Jiangxi Electric Power Research Institute, Nanchang 330096, Jiangxi, China;
Highly Crystalline Nickel Borate Nanorods As Oxygen Evolution Reaction Electrocatalysts, Xi Xu, Juan Liu, Hua-Zong Wu, Wen-Jie Jiang
Journal of Electrochemistry
Hydrogen energy, a kind of clean and renewable energy, is considered to be the solution to the problems of energy crisis and environmental deterioration. Electrochemical water splitting is an efficient and promising technology for the production of high-purity hydrogen. However, oxygen evolution reaction (OER) at the anode of water electrolyzer limits the efficiency of water splitting due to the high overpotential. Therefore, the challenges still remain for the exploration of highly active, stable and low-cost catalysts with superior activity for OER. Herein, nickel borate nanorods with high crystallinity were prepared via high-temperature calcination. The as-obtained nickel borate nanorods with 2 …
Influences Of Na-Mn Ratio On Electrochemical Performances And Intercalation-Deintercalation Processes Of Sodium Ion In NaXMno2,
2018
1. School of Chemistry of and Chemical Engineering, Guangxi University, Nanning 530004, China;
Influences Of Na-Mn Ratio On Electrochemical Performances And Intercalation-Deintercalation Processes Of Sodium Ion In NaXMno2, Yong-Chun Xie, Cheng Wang, Fang Jiang, Yang Yang, Jing Su, Yun-Fei Long, Yan-Xuan Wen
Journal of Electrochemistry
In this work, NaxMnO2 was synthesized by a solid-state reaction. The influences of Na:Mn ratio on the structure, morphology and electrochemical performance, and sodium ion intercalation/deintercalation processes were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, field emission scanning electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic charge-discharge test. The prepared NaxMnO2 was mainly composed of Na0.7MnO2 and Na0.91MnO2, and the content of Na0.91MnO2 increased with the increase of Na:Mn ratio. However, the activation energy values of surface membrane diffusion, interfacial electrochemical reaction and …
Development Of Self-Healing Mechanisms For Asphalt Pavements,
2018
Louisiana State University and Agricultural and Mechanical College
Development Of Self-Healing Mechanisms For Asphalt Pavements, Max Abelardo Aguirre Deras
LSU Doctoral Dissertations
Self-healing mechanisms, such as microcapsules or hollow-fibers, filled with an asphalt rejuvenator present an emerging technology that would enhance an asphalt mixture’s resistance to cracking damage caused by vehicular and environmental loading. The objectives of this study were to: (a) Evaluate the effects of asphalt rejuvenators on hot-mix asphalt mixtures in order to test its effects on the fundamental engineering properties of the mixtures at high and intermediate temperatures; (b) Develop a synthesis procedure for production of microcapsules and hollow-fibers containing an asphalt rejuvenator; (c) Evaluate the self-healing efficiency of double-walled microcapsules and hollow-fibers filled with an asphalt rejuvenator, through …
