Dynamics and Dynamical Systems Commons^™

Collision Dynamics Of Compound Droplets In Microchannels: A Combined Numerical And Data-Driven Study, S M Abdullah Al Mamun

Dissertations

Understanding and predicting the hydrodynamic interactions of micron-scale droplets is crucial in a wide range of industrial and real-life applications, including microfluidics, pharmaceutics, drug delivery, food science, and enhanced oil recovery. These multi-phase and multi-scale phenomena are further complicated by the presence of core droplets of an immiscible fluid within shell droplets, known as compound droplets. The collisions and interactions of droplets in emulsions are influenced by various physical and geometric parameters, leading to distinct rheological and dynamic responses. This research employs numerical methods for a systematic parametric study of both simple and compound droplet pair collisions under confined shear …

Capacitive Sensors With Ultra-Small Capacitance For Smart Measurement And Control Systems, Rustam Baratov, Farrux Jabbor O'G'Li Ko'charov

Chemical Technology, Control and Management

This article discusses methods of low capacitance measurement of capacitive sensors. The results of the study of the amplitude-frequency (AF) and phase-frequency (PF) response of measurement circuits of capacitive sensors for low capacitances measurement, consisting of RC - differentiating elements are presented. The input and output parameters of the differentiating circuit and the complex transfer function are analyzed. The research results show that low capacitances measurement by measuring the rectangular pulses duration is the most effective measurement method.

Endwall Contouring For Lowering The Thermal Load And Augmenting The Turbine Efficiency, Arjun Kozhikkatil Sunil, Tide Porathoor Sunny

Makara Journal of Technology

Endwall contouring having significance in delineating ideal endwalls competent in thermal load depletion is the focus of this study. We have successfully utilized non-axisymmetric contoured endwalls to enhance turbine performance by controlling the secondary flow characteristics in a blade passage through steady-state numerical hydrodynamics. The supreme endwall pattern could lower the gross pressure loss at the design stage and is related to the size of the top-loss location being productively lowered. The selective numerical shape change using multi-objective optimization at the most prominent locations resulted in contoured endwall geometry and a considerable reduction of thermal exchange in the vane passage …

Perona-Malik Diffusion-Driven Regularization For Image Resolution Enhancement In Electrical Capacitance Tomography, Nassor Ally

Tanzania Journal of Engineering and Technology (TJET)

Electrical Capacitance Tomography (ECT) is a non-invasive promising method for monitoring industrial processes, such as oil-gas flow in pipelines and solid-gas flow in pneumatic systems. Despite its potential benefits, ECT generates poor-quality images, often used only for qualitative analysis. A non-linear relationship between measured capacitances and permittivity distribution and the ill-posedness of the sensitivity matrix elements causes this limitation. This hinders the applicability of ECT in monitoring online industrial process applications. This work proposes a reconstruction method based on a nonlinear diffusion function to generate high-quality images from the measured capacitance data from the ECT system. The diffusion regularization functional …

Lean Manufacturing Practices In Tanzania: Exploring Awareness, Training And Capital Investment, Francis D. Sinkamba

Tanzania Journal of Engineering and Technology (TJET)

With the growing competition among industries in the world, manufacturing industries are now forced to adopt the Lean Manufacturing philosophy to improve their competitive abilities. The adoption of the philosophy is very low in developing countries such as Tanzania, as is demonstrated with 1% of publications and the lack of knowledge and capital for Lean Manufacturing implementation causes this. Furthermore, the contribution of the sector to the Gross Domestic Product in Tanzania is low and stands at 8.4%. The study wants to bridge the gap in training, capital and awareness of Lean Manufacturing in Tanzania. Survey and purposive sampling techniques …

Assessment Of The Factors Affecting The National Ict Broadband Backbone (Nictbb) Systems Restoration Time, Victoria Mahabi

Tanzania Journal of Engineering and Technology (TJET)

This study investigates the factors affecting the prolonged system restoration time when national ICT broadband backbone (NICTBB) services are affected by breakdown incidents. NICTBB is the government-owned backbone infrastructure constructed nationally by the Republic of Tanzania to increase the usage of ICT for equitable and sustainable socio-economic development and accelerate poverty reduction. This study utilised a mixture of exploratory and descriptive study approaches. The sample size determination was executed using purposing and simple random sampling, thus involving 289 respondents. The data reliability test was undertaken. It was followed by factor analysis, analysis of variances (ANOVA), linear regression analysis, and confirmed …

Development And Testing Of Small-Scale Flash Dryer For Maize Bran, Eden Ngowi

Tanzania Journal of Engineering and Technology (TJET)

Sun drying is the most common technique used to dry various food products due to its economic convenience. However, it is not effective owing to its unreliable nature leading to microbial deterioration and aflatoxin contamination of food. In Tanzania, about 1.3 million tonnes of maize bran are at risk of deterioration annually due to improper drying. The aim of this study was to design, fabricate and test an efficient small-scale flash dryer for maize bran. Using principles of material and energy balance, a small-scale flash dryer with a throughput of 500 kg of dry product per hour was designed resulting …

Analysis Of The Factors Affecting The Oil Recovery From Oilseeds In A Multistage Crosscurrent Leaching Process, Samuel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

The analysis of the total oil recovery from oilseeds in a multi-stage crosscurrent leaching process is presented. The model created using mass balance equations for three stages was used to analyze the factors affecting total oil recovery, To. The key performance factors (raw meal feed flow rate, solvent feed flow rate in each stage, solvent distribution factor for each stage, percent oil in the raw meal (Poil), solids to solution ratio in the underflow (N), solvent to solids ratio (SSR), solvent to oil ratio (SOR) and wash ratio (WR) were varied while assessing To. While SSRi and SORi ranged from …

Can Smart Supply Chain Bring Agility And Resilience For Enhanced Sustainable Business Performance?, Mahak Sharma, Rose Antony, Ashu Sharma, Tugrul Daim

Engineering and Technology Management Faculty Publications and Presentations

Purpose

Supply chains need to be made viable in this volatile and competitive market, which could be possible through digitalization. This study is an attempt to explore the role of Industry 4.0, smart supply chain, supply chain agility and supply chain resilience on sustainable business performance from the lens of natural resource-based view.

Design/methodology/approach

The study tests the proposed model using a covariance-based structural equation modelling and further investigates the ranking of each construct using the artificial neural networks approach in AMOS and SPSS respectively. A total of 234 respondents selected using purposive sampling aided in capturing the industry practices …

Numerical Investigation Of Supersonic Flow Over A Wedge By Solving 2d Euler Equations Utilizing The Steger–Warming Flux Vector Splitting (Fvs) Scheme, Mitch Wolff, Hashim H. Abada, Hussein Awad Kurdi Awad Kurdi Saad

Mechanical and Materials Engineering Faculty Publications

Supersonic flow over a half-angle wedge (θ = 15°) with an upstream Mach number of 2.0 was investigated using 2D Euler equations where sea level conditions were considered. The investigation employed the Steger–Warming flux vector splitting (FVS) method executed in MATLAB 9.13.0 (R2022b) software. The study involved a meticulous comparison between theoretical calculations and numerical results. Particularly, the research emphasized the angle of oblique shock and downstream flow properties. A substantial iteration count of 2000 iteratively refined the outcomes, underscoring the role of advanced computational resources. Validation and comparative assessment were conducted to elucidate the superiority of the Steger–Warming flux …

Investigation On The Effects Of Biofouling On The Boundary Layer, Adam N. Bacon

LSU New Orleans Theses and Dissertations

This study is an investigation of the effect of biofouling on the boundary layer of a flat plate and a NACA 4-digit series foil. Three identical hydrofoils made of resin were placed in the Gulf of Mexico at Grand Isle, Louisiana, and observed and analyzed by marine biologists at the University of New Orleans for their species composition. The resulting biofouling that grew was primarily made up of barnacles and bryozoans. The foils were submerged in an open channel flume at zero incidence and subjected to a series of experiments whose arc-length Reynolds numbers ranged from approximately 13000 to 32000. …

Towing Tank Trials Of Hydrokinetic Turbine Scale Model To Support Marine Energy System Verification, Shahab Rouhi

LSU New Orleans Theses and Dissertations

In response to the escalating demand for sustainable energy solutions and the critical reevaluation of conventional fossil fuels due to environmental concerns, this dissertation embarks on a comprehensive exploration of hydrokinetic energy as a promising alternative. The study delves into the underexplored domain of hydrokinetic energy, leveraging innovative methodologies for effective utilization and harnessing, particularly through the development and investigation of hydrokinetic turbines.

In the realm of hydrokinetic energy conversion, our research has exclusively concentrated on horizontal-axis turbines, distinct from other turbine configurations. Noteworthy is the adaptation of a conventional horizontal-axis wind turbine for water currents, revealing enhanced performance through …

Enhanced Post Deposition Annealing Conditions On The Fabrication Of High Quality Thermochromic Vanadium Dioxide Films, Nuru R. Mlyuka

Tanzania Journal of Engineering and Technology (TJET)

Sputter deposition of thermochromic VO2 thin films for smart window applications has been faced with several challenges including the need for high deposition temperature, extremely precise and narrow range of oxygen/argon flow ratio and target poisoning during sputtering. Deposition of VO2 at room temperature without oxygen followed by post-deposition annealing has been cited as one of the potential mitigations to the challenge. In this study, the effects of post-deposition annealing conditions on the structural, electrical and optical properties of VO2 thin films are reported. The films were prepared on soda lime glass substrates using DC magnetron sputtering of metallic vanadium …

Causes And Consequences Of Inefficient Drilling And Blasting In Mine Development Headings: A Case Study Of Hard Rock Gold Mining Operations In Northern Tanzania, George Bennett

Tanzania Journal of Engineering and Technology (TJET)

Despite the introduction of the perimeter blasting technique at the Tulawaka Gold Mine, the mine continued to suffer from an overbreak of mine development headings, with an average overbreak of 24% every 22 m, which is approximately twice the acceptable 10% overbreak. The causes of this problem include ineffective drilling practices and uneven and excessive charging of explosives, resulting in a slightly high powder factor of 3.94 kg/m3 instead of 3.8 kg/m3, as per the design. The problem of overbreak resulted in ore dilution, a longer mine development cycle time and additional costs of approximately US$ 45 per cut, especially …

General Hydrogeochemical Characterization Of Groundwater In Coastal Aquifers Of Kilwa Kisiwani Oceanic Island, South East Tanzania, Simon R Melchioly

Tanzania Journal of Engineering and Technology (TJET)

The main objective of this study was to determine the hydrogeochemical processes controlling the groundwater chemistry on the Island and assess its suitability for human consumption and irrigation. The methodology used in the study include hydrogeological assessment of the study area and laboratory analysis for general physico-chemical parameters of groundwater. Other parameters such as Soluble sodium percentage (SSP) or % Na+, Sodium Adsorption Ratio (SAR), Magnesium adsorption ratio (MAR), Residual sodium carbonate (RSC), hydrochemical facies classification, and Water Quality Index (WQI) were calculated using empirical formulae. The effects of salinization of groundwater were classified using the chloride-Bicarbonate (Cl/HCO3) and the …

Production Of Biofertilizer From Fruit And Garden Waste, Neema Msuya

Tanzania Journal of Engineering and Technology (TJET)

The project focused on the production of bio-fertilizer from fruit and garden waste, with a specific emphasis on utilizing pineapple tops in the composting process. The objective was to produce and assess the properties of the bio fertilizer obtained from this process and evaluate its potential application in agriculture. In this study, the composting process was done in a 0.7 m long, 0.85 wide and 1.1 m high vessel, and 0.238 m3 pineapple top wastes, resulting in 0.35 m3 of biofertilizer. The bio fertilizer produced exhibited favorable characteristics, including a moisture content of 36%, pH of 7.1, and a total …

Optimization Pump As Turbine Coupled To A Self-Excited Induction Generator Using Multi-Objective Genetic Algorithm, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

As a way of accelerating the deployment of affordable and clean renewable energy generation technologies, applying a pump working as a turbine coupled to a self-excited induction generator is gaining popularity in various areas including energy recovery and micro hydro systems. However, it is currently challenging to predict the performance of the PAT-SEIG system and there is no agreed-upon rule on the selection of the appropriate system to be installed at a particular site. This paper has presented multi-objective optimization to select the best operating point of the PAT-SEIG system. The results show that the peak efficiencies for the PAT …

Assessment Of Risk Factors Related To Body Pain Complaints In Tanzania Construction Industry, Fatma K. Mohamed

Tanzania Journal of Engineering and Technology (TJET)

The construction industry is associated with risks that can result in musculoskeletal diseases. Although young male workers who are presumed to be healthy dominate the industry in Tanzania, body pain complaints have been widely reported. The aim of this study is to assess the prevalence and causes of body pains in workers. A cross-sectional study involving 396 workers was conducted. A chi square test was used for testing association of independent categorical variables and binary logistic regression analysis was used to determine predictors for body pain complaints. The results show that all study participants complained of at least one form …

Comparison Of Meteorological Drought Indices In Tanzania Using The Meteorological Drought Monitoring Software Package, Paul Ts Limbu

Tanzania Journal of Engineering and Technology (TJET)

Low precipitation, substantial evaporation, and an unequal distribution of precipitation throughout the area are the characteristics of drought, a climatic abnormality. This study used the Meteorological Drought Monitoring (MDM) software and monthly rainfall data from the Tanzania Meteorological Authority (TMA) to examine and compare the Deciles Index (DI), Standardised Precipitation Index (SPI), Percent of Normal Index (PNI), Rainfall Anomaly Index (RAI), Z-Score Index (ZSI), China-Z Index (CZI), and Modified China-Z Index (MCZI) for drought monitoring in Tanzania from 1988 to 2017. It was found that ZSI represented the dry years better than other indices, followed by DI, RAI, PNI, SPI, …

Hygrothermal Risk Assessment Of External Wall Insulation Retrofit To Non-Traditional Wall Types In An Irish Context, Using The Glaser Method And A Heat, Air And Moisture Transient Model, Gareth Mcdonnell, Joseph Little

Articles

The Climate Action Plan 2019 targets the low-energy retrofit of 500,000 existing Irish homes before 2030.1 Up to 80 per cent of building failures can be attributed to moisture risks.2 The literature indicated that external wall insulation (EWI, ETICS) failures are mostly due to moisture ingress at junctions and interfaces. A hygrothermal risk assessment of EWI on three walls with rendered concrete/concrete blockwork/cavity walls in Dublin, Belfast and Belmullet was undertaken using transient numerical simulation and the Glaser method. The guidance, common practice indicates a preference for Glaser. The initial simulation results were compared to assess the appropriateness of Glaser. …