Robotics Commons^™

Humanoid Robot Motion Control For Ramps And Stairs, Tommy Truong

USF Tampa Graduate Theses and Dissertations

Humanoid robot research and development have been an ongoing effort since the 1900sand can be broken down to two problems. A mechanical problem, getting a humanoid robot to move human-like or a software problem, getting a humanoid robot to behave human-like. These problems of moving and behaving human-like can be often solved using control theory as research advances. For the premise of this research, we explore how to balance and walk on non-flat terrain for the humanoid robot Darwin-Op. Since the focus was on the control theory, the vision control to detect the non-flat terrain was a side objective. The …

Challenges Of The Industrial Revolution Era 1.0 To 5.0 : University Digital Library In Indoensia, Merlin Apriliyanti, Ilham M

Library Philosophy and Practice (e-journal)

This study explains the development of the world of libraries to establish a very close relationship with the world of information technology. For this reason, facilities and infrastructure are needed to facilitate data and information retrieval quickly and accurately. Facing the challenges of the Industrial Revolution 5.0 era by utilizing information technology, libraries must also adapt to the times. Because the library has an important role, among others, as a source of information and the development of knowledge. Used libraries are still conventional to be converted into digital libraries. In essence, this development represents the desire of library users for …

Physiological Signal Analysis For Emotion Estimation Of Children With Autism Spectrum Disorder, Janet Pulgares Soriano, Karla Conn Welch Phd

Posters-at-the-Capitol

The diagnosis of Autism Spectrum Disorder (ASD) in children is based on human observations by a clinician. The medical evaluation assesses deficits in social communication, social interaction, and restricted, repetitive behaviors. Robotic technology can assist in quantitatively measuring the observations to be used as a future tool for autism diagnosis and intervention. The project explores this technology to produce robotic partners that can adapt to the needs of the ASD population. This way, such robots could serve as instructors or learning peers. A friendly, partner robot, specifically designed for children with ASD could be used to investigate the effect of …

A Water-Surface Self-Leveling Landing Platform For Small-Scale Uavs, Mbidi Santos

Electronic Theses and Dissertations

Because many of the most widely used UAVs, such as the Vertical Take-Off and Landing (VTOL), cannot land securely on sloped or fast-changing surfaces, there is a need to design better deployment and landing stations. This document proposes an approach to design a water-surface self-leveling landing platform by implementing the best concept to be used as a safe ground for UAVs to land and deploy on open waters. After conceptualizing multiple design ideas, these options were laid out in a decision matrix with four criteria: degrees of freedom, mechanical complexity, manufacturing, and cost. The chosen concept was the spherical parallel …

Transferring Studies Across Embodiments: A Case Study In Confusion Detection, Na Li, Robert J. Ross

Articles

Human-robot studies are expensive to conduct and difficult to control, and as such researchers sometimes turn to human-avatar interaction in the hope of faster and cheaper data collection that can be transferred to the robot domain. In terms of our work, we are particularly interested in the challenge of detecting and modelling user confusion in interaction, and as part of this research programme, we conducted situated dialogue studies to investigate users' reactions in confusing scenarios that we give in both physical and virtual environments. In this paper, we present a combined review of these studies and the results that we …

Design And Analysis Of Marangoni-Driven Robotic Surfers, Mitchel L. Timm

Dissertations, Master's Theses and Master's Reports

We designed and experimentally studied the dynamics of two robotic systems that surf along the water-air interface. The robots were self-propelled by means of creating and maintaining a surface tension gradient resulting from an asymmetric release of isopropyl alcohol (IPA). The imbalance in the distribution of surface tension surrounding the robots generates a propulsive force commonly referred to as Marangoni propulsion. First, we considered a single surfer, which was custom-made with novel control mechanisms that allow for both forward motion and steering to be remotely adjusted solely through the manipulation of local surface stresses. We analyzed the performance of this …

Can We Make Our Robot Play Soccer? Influence Of Collaborating With Preservice Teachers And Fifth Graders On Undergraduate Engineering Students' Learning During A Robotic Design Process (Work In Progress), Krishnanand Kaipa, Jennifer Kidd, Julia Noginova, Francisco Cima, Stacie Ringleb, Orlando Ayala, Pilar Pazos, Kristie Gutierrez, Min Jung Lee

Mechanical & Aerospace Engineering Faculty Publications

This work-in-progress paper describes engineering students’ experiences in an NSF-funded project that partnered undergraduate engineering students with pre-service teachers to plan and deliver robotics lessons to fifth graders at a local school. This project aims to address an apparent gap between what is taught in academia and industry’s expectations of engineers to integrate perspectives from outside their field to solve modern societal problems requiring a multidisciplinary approach. Working in small teams over Zoom, participating engineering, education, and fifth grade students designed, built, and coded bio-inspired COVID companion robots. The goal for the engineering students was to build new interprofessional skills, …

Biomimetic Design, Modeling, And Adaptive Control Of Robotic Gripper For Optimal Grasping, Mushtaq Al-Mohammed

Electronic Theses and Dissertations, 2020-2023

Grasping is an essential skill for almost every assistive robot. Variations in shape and/or weight of different objects involved in Activities of Daily Living (ADL) lead to complications, especially, when the robot is trying to grip novel objects for which it has no prior information –too much force will deform or crush the object while too little force will lead to slipping and possibly dropped objects. Thus, successful grasping requires the gripper to immobilize an object with the minimal force. In Chapter 2, we present the design, analysis, and experimental implementation of an adaptive control to facilitate 1-click grasping of …

Formation Control With Bounded Controls And Collision Avoidance: Theory And Application To Quadrotor Unmanned Air Vehicles, Zachary S. Lippay

Theses and Dissertations--Mechanical and Aerospace Engineering

This dissertation presents new results on multi-agent formation control and applies the new control algorithms to quadrotor unmanned air vehicles. First, this dissertation presents a formation control algorithm for double-integrator agents, where the formation is time varying and the agents’ controls satisfy a priori bounds (e.g., the controls accommodate actuator saturation). The main analytic results provide sufficient conditions such that all agents converge to the desired time-varying relative positions with one another and the leader, and have a priori bounded controls (if applicable). We also present results from rotorcraft experiments that demonstrate the algorithm with time-varying formations and bounded controls. …

An Experimental Study Towards Underwater Propulsion System Using Structure Borne Traveling Waves, Shreyas Suhas Gadekar

Dissertations, Master's Theses and Master's Reports

The method of generating steady-state structure-borne traveling waves underwater in an infinite media creates abundant opportunities in the field of propulsive applications, and they are gaining attention from several researchers. This experimental study provides a framework for harnessing traveling waves in a 1D beam immersed under quiescent water using two force input methods and providing a motion to an object floating on the surface of the water.

In this study, underwater traveling waves are tailored using structural vibrations at five different frequencies in the range of 10Hz to 300Hz. The resulting fluid motion provides a propulsive thrust that moves a …

Developing Reactive Distributed Aerial Robotics Platforms For Real-Time Contaminant Mapping, Joshua Ashley

Theses and Dissertations--Electrical and Computer Engineering

The focus of this research is to design a sensor data aggregation system and centralized sensor-driven trajectory planning algorithm for fixed-wing aircraft to optimally assist atmospheric simulators in mapping the local environment in real-time. The proposed application of this work is to be used in the event of a hazardous contaminant leak into the atmosphere as a fleet of sensing unmanned aerial vehicles (UAVs) could provide valuable information for evacuation measures. The data aggregation system was designed using a state-of-the-art networking protocol and radio with DigiMesh and a process/data management system in the ROS2 DDS. This system was tested to …

Garden Bot: Autonomous Home Garden Weed Removal Robot, Brendon Lovejoy, Robert Connolly, Isaac Lucas, Stevan Veselinov

Williams Honors College, Honors Research Projects

With frequent weeding being a tedious chore and an essential task for a successful garden, there is need for an automated method of handling this routine. Existing technologies utilize computer vision, GPS, multiple units and other tools to remove weeds from garden plots. However, these solutions are often complex and expensive, suited for large agricultural plots in contrast to small-scale home gardens. In addition, many of these technologies, along with manual tillers and cultivators suited for home use, are unable to perform weeding within rows of crops in a process known as intra-row weeding. The Garden Bot is an autonomous, …

Cardbot, Jakob Reiter, Grant Crump, Drake Drivere, Adam Miner

Williams Honors College, Honors Research Projects

Many people enjoy playing cards but playing cards in the times of COVID-19 is difficult. There are many designs for dealing and shuffling robots, but few include sanitization and autonomous operation. This design is for a BlackJack card dealing and shuffling robot that will be autonomous and will sanitize the playing cards using UV-C LEDs. This will assist in keeping the user safe while playing a game of BlackJack

Efficient And Accurate Cordic Pipelined Architecture Chip Design Based On Binomial Approximation For Biped Robot, Rih-Lung Chung, Yen Hsueh, Shih-Lun Chen, Patricia Angela R. Abu

Department of Information Systems & Computer Science Faculty Publications

Recently, much research has focused on the design of biped robots with stable and smooth walking ability, identical to human beings, and thus, in the coming years, biped robots will accomplish rescue or exploration tasks in challenging environments. To achieve this goal, one of the important problems is to design a chip for real-time calculation of moving length and rotation angle of the biped robot. This paper presents an efficient and accurate coordinate rotation digital computer (CORDIC)-based efficient chip design to calculate the moving length and rotation angle for each step of the biped robot. In a previous work, the …

Design Of Human Inspired Feet For Mithra, A High-Performance Humanoid Robot, Spencer Lyle Brewster

Electronic Theses and Dissertations

This thesis explores the foot design for the new humanoid robot Mithra, with the goal to improve impact mitigation, natural gait throughout the gait cycle and balance. Using human gait parameters, a stiff aluminum foot was designed to emulate human center of pressure rollover trajectories. In addition, a 2D dynamic Finite Element Analysis (FEA) of the gait cycle was created in Abaqus to rapidly prototype foot designs. Data from the FE model provided impact forces, parameters for distal foot power evaluation and maximum lean angles. From this model a flexible nylon foot was optimized for the given design objectives. The …

Design And Control Of Quasi-Direct Drive Actuation For Lightweight And Versatile Wearable Robots, Shuangyue Yu

Dissertations and Theses

Wearable robots have shown great potential for augmenting the physical capabilities of humans in lab settings. However, wearable robots for augmenting the physical capabilities of humans under community-based conditions are the new frontier of robotics. Furthermore, the design and control are still considered to be grand challenges for providing physical augmentation for humans. In terms of design, the state-of-the-art exoskeletons are typically rigid, bulky, and limited to lab settings. In terms of control, most of the rhythmic controllers are not versatile and are focused only on steady-state walking assistance.

The motivation behind my research is to improve both the design …

The Implementation Of Advanced Digitalization In The Oil And Gas Industry, Ensieh Rezafar

Walden Dissertations and Doctoral Studies

AbstractThe immature advanced digitalization in the oil and gas industry can limit access to the potential value of mature progressive digitalization. Oil and gas leaders must expedite the implementation of advanced digitalization to increase organizational proficiencies and reduce costs and losses. Grounded in Pettigrew and Whipp’s dimensions of strategic change theory, the purpose of this qualitative multiple case study was to explore strategies some leaders in the oil and gas industry used to implement advanced digitalization. The participants were seven leaders in two oil service companies in North America involved in the successful implementation of progressive digitalization. Data were collected …

A Machine Learning Approach To Intended Motion Prediction For Upper Extremity Exoskeletons, Justin Berdell

Graduate Research Theses & Dissertations

A fully solid-state, software-defined, one-handed, handle-type control device built around a machine-learning (ML) model that provides intuitive and simultaneous control in position and orientation each in a full three degrees-of-freedom (DOF) is proposed in this paper. The device, referred to as the “Smart Handle”, and it is compact, lightweight, and only reliant on low-cost and readily available sensors and materials for construction. Mobility chairs for persons with motor difficulties could make use of a control device that can learn to recognize arbitrary inputs as control commands. Upper-extremity exoskeletons used in occupational settings and rehabilitation require a natural control device like …

High Energy And Power Density Peptidoglycan Musclesthrough Super-Viscous Nanoconfined Water, Haozhen Wang, Zhi-Lun Liu, Jianpei Lao, Sheng Zhang, Rinat Abzalimov, Tong Wang, Xi Chen

Advanced Science Research Center

Water-responsive (WR) materials that reversibly deform in response to humidity changes show great potential for developing muscle-like actuators for miniature and biomimetic robotics. Here, it is presented that Bacillus (B.) subtilis’ peptidoglycan (PG) exhibits WR actuation energy and power densities reaching 72.6 MJ m−3 and 9.1 MW m−3, respectively, orders of magnitude higher than those of frequently used actuators, such as piezoelectric actuators and dielectric elastomers. PG can deform as much as 27.2% within 110 ms, and its actuation pressure reaches ≈354.6 MPa. Surprisingly, PG exhibits an energy conversion efficiency of ≈66.8%, which can be attributed to its super-viscous nanoconfined …

Factors Influencing The Effectiveness Of Managing Human–Robot Teams, Theodore B. Terry

Walden Dissertations and Doctoral Studies

Certain factors can influence the capabilities of a robot–human team by affecting their social and behavioral dynamics in a work environment. But these factors were not known due to the progressive nature of human–robot partnerships and a lack of peer-reviewed literature on the topic. This e-Delphi study aimed to identify and understand these unknown influential factors based on the participants’ insights. The overarching research question asked about the need to determine factors that might influence the effectiveness of managing human-robot teams. The basis for the conceptual framework for this study was the theory of communication used in organizational management. Twelve …