Robotics Commons^™

Cutting-Edge Technologies To Achieve A Higher Level Of Modular Construction – Literature Review, Seungtaek Lee, Jin Ouk Choi, Seung Song

Civil and Environmental Engineering and Construction Faculty Research

Cost overruns, schedule delays, and a shortage of skilled labor are common problems the construction industry is currently experiencing. Modularization and standardization strategies have the potential to resolve the various problems mentioned above and have been applied for various construction applications for a long time. However, the level of modularization remains low, and modular construction projects have not been getting the full benefits. Thus, this review investigated the cutting-edge technologies currently being utilized to develop the modular construction field. For this paper, qualified research papers were identified using predetermined keywords from previous related research papers. Identified literature was then filtered …

The Current State And Future Directions Of Industrial Robotic Arms In Modular Construction, Seung Ho Song, Jin Ouk Choi, Seungtaek Lee

Civil and Environmental Engineering and Construction Faculty Research

Industrial robotic arms are widely adopted in numerous industries for manufacturing automation under factory settings, which eliminates the limitations of manual labor and provides significant productivity and quality benefits. The U.S. modular construction industry, despite having similar controlled factory environments, still heavily relies on manual labor. Thus, this study investigates the U.S., Canada, and Europe-based leading modular construction companies and research labs implementing industrial robotic arms for manufacturing automation. The investigation mainly considered the current research scope, industry state, and constraints, as well as identifying the types and specifications of the robotic arms in use. First, the study investigated well-recognized …

The Poly Rover Project, Eric Lei, Alla Alamsi, Neil Patel, Diego Ramos

Computer Engineering

The Polyver Project is an idea born from the curiosity of a few students who wondered what the interaction between a physical person and a rover as the host of random internet users would look like. It is also an experiment to enhance the exploration of real world sites in real time while also having the power of interaction.

The goal of the Polyver Project is to build the foundation for a system that can serve as the interface between the internet and a fleet of rovers. Each rover is equipped with at least a camera, microphone, and a speaker …

Dual-Axis Precision Imager, Gary Huarng

Computer Engineering

The Dual-Axis Precision Imager (DAPI) is a drawing robot that processes images and draws them on a whiteboard. The system has two modes: a Sobel filter mode that finds the edges of the input image with a Sobel filter, and a tri-tone grayscale mode that approximates the shading of the input image with the colors white, gray, and black. The DAPI consists of an Arduino-controlled XY gantry system with a pen mounted on the gantry head, and a Processing IDE program that processes the original image, converts the processed image into gantry instructions, and sends them to the Arduino for …

Developing A Miniature Smart Boat For Marine Research, Michael Isaac Eirinberg

Computer Engineering

This project examines the development of a smart boat which could serve as a possible marine research apparatus. The smart boat consists of a miniature vessel containing a low-cost microcontroller to live stream a camera feed, GPS telemetry, and compass data through its own WiFi access point. The smart boat also has the potential for autonomous navigation. My project captivated the interest of several members of California Polytechnic State University, San Luis Obispo’s (Cal Poly SLO) Marine Science Department faculty, who proposed a variety of fascinating and valuable smart boat applications.

Therapeutic Mechanical Horse, Cade M. Liberty, Aleya Dolorfino, Peter Philips, Zuzanna Dominik, Luke Watts

Mechanical Engineering

Jack's Helping Hand and its hippotherapy participants required a device to serve as an alternative to a live horseback riding experience that could also increase the range of riders. This would provide more clients with equine-assisted therapy that has proven to better the lives of people with both physical and mental disabilities. Horses can be unpredictable, tall, and sometimes anxiety-inducing, especially for new riders. Our group’s aim was to develop a mechanical horse that will be able to reduce these issues for equine therapy centers and the riders they help. When a rider gets to practice sitting on the horse …

Mars Rover Mechanical Arm & Turret, Kendall C. Chappell, Kyle D. Peterson, Rodrigo Gonzalez, Sam Cole

Mechanical Engineering

The Rover Mechanical Arm and Turret (RAT) team was originally tasked with designing and building a mechanical arm to attach to the Exo Mars rover: a project headed by Cal Poly professor, Rich Murray. The rover will be the 3rd in a series of rovers sponsored by Murray. Through ideation, comparison studies, research, and prototyping, the RAT team determined a design capable of fulfilling the sponsor’s specifications. The concept design is lightweight, durable, and capable of 4 degrees of freedom. With two links and a mechanical claw, the rover arm has the capability to retrieve small rock samples from Mars's …

Smartphone Control Of Rc Cars, Weston R. Fitzgerald

Electrical Engineering

The smartphone-controlled RC (remote-controlled) car is an inexpensive remote-controlled car designed to be fast and portable. Instead of manufacturing, packaging, and shipping a separate controller, the remote control is implemented in a phone application, which saves time and money in both the design process and the manufacturing process. Utilizing the user’s smartphone is more cost-effective since mobile devices are a common recurrence, and packaging fewer devices results in overall better portability of the product.

This smartphone-controlled car is speedy and intuitive to learn for typical smartphone users. The user can change the car’s speed and direction wirelessly using their phone; …

Low-Cost Uav Swarm For Real-Time Object Detection Applications, Joel Valdovinos Miranda

Master's Theses

With unmanned aerial vehicles (UAVs), also known as drones, becoming readily available and affordable, applications for these devices have grown immensely. One type of application is the use of drones to fly over large areas and detect desired entities. For example, a swarm of drones could detect marine creatures near the surface of the ocean and provide users the location and type of animal found. However, even with the reduction in cost of drone technology, such applications result costly due to the use of custom hardware with built-in advanced capabilities. Therefore, the focus of this thesis is to compile an …

Outdoor Operations Of Multiple Quadrotors In Windy Environment, Deepan Lobo

Dissertations

Coordinated multiple small unmanned aerial vehicles (sUAVs) offer several advantages over a single sUAV platform. These advantages include improved task efficiency, reduced task completion time, improved fault tolerance, and higher task flexibility. However, their deployment in an outdoor environment is challenging due to the presence of wind gusts. The coordinated motion of a multi-sUAV system in the presence of wind disturbances is a challenging problem when considering collision avoidance (safety), scalability, and communication connectivity. Performing wind-agnostic motion planning for sUAVs may produce a sizeable cross-track error if the wind on the planned route leads to actuator saturation. In a multi-sUAV …

Design And Control Of Next-Generation Uavs For Effectively Interacting With Environments, Caiwu Ding

Dissertations

In this dissertation, the design and control of a novel multirotor for aerial manipulation is studied, with the aim of endowing the aerial vehicle with more degrees of freedom of motion and stability when interacting with the environments. Firstly, it presents an energy-efficient adaptive robust tracking control method for a class of fully actuated, thrust vectoring unmanned aerial vehicles (UAVs) with parametric uncertainties including unknown moment of inertia, mass and center of mass, which would occur in aerial maneuvering and manipulation. The effectiveness of this method is demonstrated through simulation. Secondly, a humanoid robot arm is adopted to serve as …

Cloudbots: Autonomous Atmospheric Explorers, Akash Binoj

Honors Scholar Theses

The CloudBot is an autonomous weather balloon that operates on the principle of variable buoyancy to ascend and descend in the atmosphere. This project aims to develop a device that will collect atmospheric measurements and communicate them mid-flight. The apparatus consists of a helium-filled balloon, the robotic payload, and an air cell. The fixed-volume helium balloon at the top provides an upwards buoyancy force, while the air cell at the bottom can hold a variable amount of pressure to adjust the weight of the CloudBot. By doing so, it is able to travel in storm conditions and collect valuable atmospheric …

A Music-Therapy Robotic Platform For Children With Autism: A Pilot Study, Huanghao Feng, Mohammad H. Mahoor, Francesca Dino

Electrical and Computer Engineering: Faculty Scholarship

Children with Autism Spectrum Disorder (ASD) experience deficits in verbal and nonverbal communication skills including motor control, turn-taking, and emotion recognition. Innovative technology, such as socially assistive robots, has shown to be a viable method for Autism therapy. This paper presents a novel robot-based music-therapy platform for modeling and improving the social responses and behaviors of children with ASD. Our autonomous social interactive system consists of three modules. Module one provides an autonomous initiative positioning system for the robot, NAO, to properly localize and play the instrument (Xylophone) using the robot’s arms. Module two allows NAO to play customized songs …

Du Undergraduate Showcase: Research, Scholarship, And Creative Works: Abstracts, Emma Aggeler, Elena Arroway, Daisy T. Booker, Justin Bravo, Kyle Bucholtz, Megan Burnham, Nicole Choi, Spencer Cockerell, Rosie Contino, Jackson Garske, Kaitlyn Glover, Caroline Hamilton, Haley Hartmann, Madalyne Heiken, Colin Holter, Leah Huzjak, Alyssa Jeng, Cole Jernigan, Chad Kashiwa, Adelaide Kerenick, Emily King, Abigail Langeberg, Maddie Leake, Meredith Lemons, Alec Mackay, Greer Mckinley, Ori Miller, Guy Milliman, Katherine Miromonti, Audrey Mitchell, Lauren Moak, Megan Morrell, Gelella Nebiyu, Zdenek Otruba, Toni V. Panzera, Kassidy Patarino, Sneha Patil, Alexandra Penney, Kevin Persky, Caitlin Pham, Gabriela Recinos, Mary Ringgenberg, Chase Routt, Olivia Schneider, Roman Shrestha, Arlo Simmerman, Alec Smith, Tessa Smith, Nhi-Lac Thai, Kyle Thurmann, Casey Tindall, Amelia Trembath, Maria Trubetskaya, Zachary Vangelisti, Peter Vo, Abby Walker, David Winter, Grayden Wolfe, Leah York

DU Undergraduate Research Journal Archive

Abstracts from the DU Undergraduate Showcase.

Automotive Sensor Fusion Systems For Traffic Aware Adaptive Cruise Control, Jonah T. Gandy

Theses and Dissertations

The autonomous driving (AD) industry is advancing at a rapid pace. New sensing technology for tracking vehicles, controlling vehicle behavior, and communicating with infrastructure are being added to commercial vehicles. These new automotive technologies reduce on road fatalities, improve ride quality, and improve vehicle fuel economy. This research explores two types of automotive sensor fusion systems: a novel radar/camera sensor fusion system using a long shortterm memory (LSTM) neural network (NN) to perform data fusion improving tracking capabilities in a simulated environment and a traditional radar/camera sensor fusion system that is deployed in Mississippi State’s entry in the EcoCAR Mobility …

The Effects Of Ecological Simulation For Ground Vehicle Mobility Forecasting, Christopher R. Hudson

Theses and Dissertations

Unmanned ground vehicles (UGV) are being explored for use in military domains. Military UGVs operate in complex off-road environments. Vehicle mobility forecasting plays an important role in understanding how and where a vehicle can operate. Traditional mobility forecasting has been done using an analytical model known as the NATO Reference Mobility Model (NRMM). There has been a push to extend the forecasting capabilities of NRMM by integrating more simulation methods. Simulation enables the repeated testing of UGVs in scenarios that would be difficult or dangerous to study in real world testing. To accurately capture UGV performance in simulation, the operating …

Automated Robotic Light Bulb Testing Platform, Agha I. Akram, Muhammad Ali Ummy

Publications and Research

The main purpose of this project is to create a functional prototype of a multilayered system that incorporates aspects of electrical, mechanical, and computer engineering technology. The main objective of the system is to be able to determine whether a light bulb is working or not. The building blocks of this system are a robotic arm that is able to slide along a rail (for added mobility), a conveyor belt, and an electromechanical device that holds and tests light bulbs. Initially, the robot arm picks up a light bulb and places it into the holder which then tests it. A …

Control, Decision-Making, And Learning Approaches For Connected And Autonomous Driving Systems With Humans-In-The-Loop, Fangjian Li

All Dissertations

By virtue of vehicular connectivity and automation, the vehicle becomes increasingly intelligent and self-driving capable. However, no matter what automation level the vehicle can achieve, humans will still be in the loop despite their roles. First, considering the manual driving car as a disturbance to the connected and autonomous vehicles (CAVs), a novel string stability is proposed for mixed traffic platoons consisting of both autonomous and manual driving cars to guarantee acceptable motion fluctuation and platoon safety. Furthermore, humans are naturally considered as the rider in the passenger vehicle. A human-centered cooperative adaptive cruise control (CACC) is designed to improve …

Designing Autonomous Drone For Food Delivery In Gazebo/Ros Based Environments, Hrishitva Patel

Computer Science and Engineering Research

There has been a growing global trend towards convenience, speed, and ease in delivery services, and this has been further accelerated by the COVID pandemic. With the everincreasing demand for easily accessible deliveries and expanded delivery service coverage, it has become critical that innovations in this space be developed to further ensure the industry’s smooth operation. With the emergence of the COVID-19 pandemic, the inadequacies became more apparent, emphasizing the need to revolutionize and accelerate the trend in order to meet the increased demand. Drone delivery systems are of particular interest in this context because they can enable faster and …

Autonomous Navigator Mobile Robot Upgrade, David Sansoucy

Thinking Matters Symposium

The mobile robot platform has been developed over the course of 10 years at USM. In Spring 2020, Belle-Isle and Werner updated the previous framework by rewriting the software to use the ROS framework running on an on-board Raspberry Pi 3. They also implemented navigation using an A* motion planning algorithm and image processing. In Summer 2021, Ames incorporated Lidar and Kinect sensors onto the robot to improve its real-time navigation capabilities. He also made improvements to the power distribution systems. This project aimed to build on the ROS frameworks developed by the previous 2 teams with the main goal …