North American Standard For Cold-Formed Steel Framing -- Product Data, 2017 Edition,
2018
Missouri University of Science and Technology
North American Standard For Cold-Formed Steel Framing -- Product Data, 2017 Edition, American Iron And Steel Institute
American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
No abstract provided.
Test Standard For Determining The Strength And Deformation Characteristics Of Cold-Formed Steel Connections, 2017 Edition,
2018
Missouri University of Science and Technology
Test Standard For Determining The Strength And Deformation Characteristics Of Cold-Formed Steel Connections, 2017 Edition, American Iron And Steel Institute
American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
No abstract provided.
Test Standard For Determining The Flexural Strength Reduction Factor Of Purlins Supporting A Standing Seam Roof System, 2017 Edition,
2018
Missouri University of Science and Technology
Test Standard For Determining The Flexural Strength Reduction Factor Of Purlins Supporting A Standing Seam Roof System, 2017 Edition, American Iron And Steel Institute
American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
No abstract provided.
Test Standard For Determining The Strength Of A Roof Panel-To-Purlin-To-Anchorage Device Connection, 2017 Edition,
2018
Missouri University of Science and Technology
Test Standard For Determining The Strength Of A Roof Panel-To-Purlin-To-Anchorage Device Connection, 2017 Edition, American Iron And Steel Institute
American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
No abstract provided.
Test Standard For Determining The Web Crippling Strength Of Cold-Formed Steel Flexural Members, 2017 Edition,
2018
Missouri University of Science and Technology
Test Standard For Determining The Web Crippling Strength Of Cold-Formed Steel Flexural Members, 2017 Edition, American Iron And Steel Institute
American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
No abstract provided.
Test Standard For Determining The Distortional Buckling Strength Of Cold-Formed Steel Hat-Shaped Compression Members, 2017 Edition,
2018
Missouri University of Science and Technology
Test Standard For Determining The Distortional Buckling Strength Of Cold-Formed Steel Hat-Shaped Compression Members, 2017 Edition, American Iron And Steel Institute
American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
No abstract provided.
Test Standard For Determining The Strength And Deformation Behavior Of Joist Connectors Attached To Cold-Formed Steel Structural Framing, 2017 Edition,
2018
Missouri University of Science and Technology
Test Standard For Determining The Strength And Deformation Behavior Of Joist Connectors Attached To Cold-Formed Steel Structural Framing, 2017 Edition, American Iron And Steel Institute
American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
No abstract provided.
Test Standard For Determining The Strength And Deformation Behavior Of Hold-Downs Attached To Cold-Formed Steel Structural Framing, 2017 Edition,
2018
Missouri University of Science and Technology
Test Standard For Determining The Strength And Deformation Behavior Of Hold-Downs Attached To Cold-Formed Steel Structural Framing, 2017 Edition, American Iron And Steel Institute
American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
No abstract provided.
Test Standard For Determining The Load-Carrying Strength Of Panels And Anchor-To-Panel Attachments For Roof Or Siding Systems Tested In Accordance With Astm E1592, 2017 Edition,
2018
Missouri University of Science and Technology
Test Standard For Determining The Load-Carrying Strength Of Panels And Anchor-To-Panel Attachments For Roof Or Siding Systems Tested In Accordance With Astm E1592, 2017 Edition, American Iron And Steel Institute
American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
No abstract provided.
Test Standard For Determining The Flexural Strength Of Cold-Formed Steel Hat-Shaped Members, 2017 Edition,
2018
Missouri University of Science and Technology
Test Standard For Determining The Flexural Strength Of Cold-Formed Steel Hat-Shaped Members, 2017 Edition, American Iron And Steel Institute
American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
No abstract provided.
Test Standard For Determining The Strength And Stiffness Of Cold-Formed Steel Diaphragms By The Cantilever Test Method, 2017 Edition,
2018
Missouri University of Science and Technology
Test Standard For Determining The Strength And Stiffness Of Cold-Formed Steel Diaphragms By The Cantilever Test Method, 2017 Edition, American Iron And Steel Institute
American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
No abstract provided.
Test Standard For Determining The Uniform And Local Ductility Of Carbon And Low-Alloy Steels, 2017 Edition,
2018
Missouri University of Science and Technology
Test Standard For Determining The Uniform And Local Ductility Of Carbon And Low-Alloy Steels, 2017 Edition, American Iron And Steel Institute
American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
No abstract provided.
Test Standard For Determining The Tensile And Shear Strengths Of Steel Screws, 2017 Edition,
2018
Missouri University of Science and Technology
Test Standard For Determining The Tensile And Shear Strengths Of Steel Screws, 2017 Edition, American Iron And Steel Institute
American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)
No abstract provided.
From Architectural Design To Structural Analysis: A Data-Driven Approach To Study Building Information Modeling (Bim) Interoperability,
2018
Western Michigan University
From Architectural Design To Structural Analysis: A Data-Driven Approach To Study Building Information Modeling (Bim) Interoperability, Mohammed Aldegeily
Masters Theses
BIM has been playing an essential role in building construction projects in recent years. It was used to automate many tasks such as clash detection, 4D planning, and quantity takeoff, among others. However, the interoperability of BIM still lacks in many fields across the architecture, engineering, and construction domains. This research studies the interoperability between architectural design and structural analysis. The goal is to explore structural analysis of BIM models through data transfer processes between different software platforms via three types of paths: (1) Application Programming Interface (API); (2) “immediately connect,” which is the direct link between software programs from …
Structural And Photoluminescence Properties Of Zno Thin Films Deposited By Ultrasonic Spray Pyrolysis,
2018
Physics Study Program, Faculty of Mathematics and Natural Sciences, Universitas Negeri Jakarta, Rawamangun 13220, Indonesia
Structural And Photoluminescence Properties Of Zno Thin Films Deposited By Ultrasonic Spray Pyrolysis, Iwan Sugihartono, Erfan Handoko, Vivi Fauzia, Artoto Arkundato, Lara Permata Sari
Makara Journal of Technology
Zinc oxide (ZnO) thin films on a silicon (Si) (111) substrate were grown herein using ultrasonic spray pyrolysis at 450 °C with different Zn concentrations. The ZnO thin films had X-ray diffraction patterns of a polycrystalline hexagonal wurtzite structure. The (002) and (101) peak intensities changed under different Zn concentrations. Furthermore, according to Scherer's and Stokes–Wilson equations, the crystallite size and the internal strain of the ZnO thin films in the (002) and (101) peaks changed with the Zn concentration. Optically, the photoluminescence spectra indicated that the ratio of the UV/GB emission of the ZnO thin films was the highest …
An Exploratory Study Of Sukuk Utilisation For Transportation Infrastructure Development In Indonesia,
2018
School of Civil Engineering and Built Environment, Science and Engineering Faculty, Queensland University of Technology, Brisbane, 4000, Australia
An Exploratory Study Of Sukuk Utilisation For Transportation Infrastructure Development In Indonesia, Fiona Lamari, Ayomi Dita Rarasati, Meilia Evita
Makara Journal of Technology
Investment in infrastructure is one of the principal drivers of the growth of the economy. For that reason, the Indonesian government has proposed an investment budget in the railway and sea and air transport sectors over the next 10 years. In order to overcome the burden of direct outflows and for the future, a study was conducted to lay down the framework of Shariah-compliant payments for the development of infrastructure in Indonesia in the transport sector. This paper aims to explore the opportunity and implementation of sukuk utilisation to develop transportation infrastructure. Secondary data study and interviews were selected for …
Small-Signal-Stability Enhancement Using A Power-System Stabilizer Based On The Cuckoo-Search Algorithm Against Contingency N-1 In The Sulselrabar 150-Kv System,
2018
Department of Energy Conversion Engineering, Politeknik Negeri Ujung Pandang, Makassar 90245, Indonesia
Small-Signal-Stability Enhancement Using A Power-System Stabilizer Based On The Cuckoo-Search Algorithm Against Contingency N-1 In The Sulselrabar 150-Kv System, Muhammad Ruswandi Djalal, Muhammad Yusuf Yunus, Herlambang Setiadi, Awan Uji Krismanto
Makara Journal of Technology
Small-signal stability is one of the main factors limiting power transmission in conventional power systems. This concern is primarily handled by adding damper windings of a synchronous generator and power-system stabilizer (PSS). However, due to the impact of the N-1 contingency, damper windings and a conventional PSS are insufficient to overcome this problem. Proper placement and design of the PSS are crucial for improving stability. One approach to optimizing the placement and tuning of the PSS is to use an artificial-intelligence method. Here, the cuckoo-search algorithm (CSA) is proposed to optimize the PSS tuning and placement. Based on simulation, it …
Isolation And Molecular Weight Characterization Of Tetragonula Laeviceps Honey Protein,
2018
Bioprocess Engineering, Department of Chemical Engineering, Faculty of Engineering, Universitas Indonesia, Depok 16424, Indonesia
Isolation And Molecular Weight Characterization Of Tetragonula Laeviceps Honey Protein, Muhamad Sahlan, Nurul Azizah, Kazuaki Hakamada, Keiichi Noguchi, Masafumi Yohda
Makara Journal of Technology
The concentration of protein in honey is lower than polysaccharide. However, recently the honey’s protein is intensively studied and it showed that protein also have several biological activities such as antibacterial activity. The purpose of this research is to isolate and characterize Tetragonula laeviceps honey protein by determining the molecular weight. Honey protein of Trigona laeviceps was isolated using ultra-filtration with the membrane’s size of 30 kDa, then concentrated using tube membrane size 10 kDa. Molecular weight was analyzed by SDS PAGE. From the analysis, there was major protein band in honey produced by Tetragona laeviceps identified. The produced molecular …
Prerequisites For Public Acceptance Of Waste-To-Energy Plants: Evidence From Germany And Indonesia,
2018
Technische Universitat Darmstadt, Fachbereich Bauingenieurwesen und Geodaesie, Institut IWAR, Fachgebiet,Abfalltechnik, Petersenstraβe 13, 64287 Darmstadt
Prerequisites For Public Acceptance Of Waste-To-Energy Plants: Evidence From Germany And Indonesia, Uwe Lahl, Barbara Zeschmar-Lahl
Makara Journal of Technology
Construction of waste incinerators often encounters resistance from the public. The minimum requirements for the ac- ceptance of these installations include modern air pollution control (APC) technology and safe disposal of residues. Confidence in the statements of government and government agencies as well as on those who support is an important point of acceptance. Independent scientific bodies such as universities can help to make this happen. In the case of the installation of waste into energy (WtE), such scientific support can be the measurement of emissions and their evalua- tion. Many products that enter the waste stream contain heavy metals, …
Hybrid Brain-Computer Interface: A Novel Method On The Integration Of Eeg And Semg Signal For Active Prosthetic Control,
2018
Electrical Engineering, School of Electrical Engineering and Informatics, Institut Teknologi Bandung, Bandung 40132, Indonesia
Hybrid Brain-Computer Interface: A Novel Method On The Integration Of Eeg And Semg Signal For Active Prosthetic Control, Reza Darmakusuma, Ary Setijadi Prihatmanto, Adi Indrayanto, Tati Latifah Mengko
Makara Journal of Technology
This paper describes a novel method for controlling active prosthetics by integrating surface electromyography (sEMG) and electroencephalograph signals to improve its intuitiveness. This paper also compares the new method (RTA-2) with other existing methods (AND and OR) for controlling active prosthetics. Based on analysis, RTA-2 features higher true positive rate (TPR) and balanced accuracy (BA) than AND method. On the other hand, the new method (RTA-2) yields lower false detection rate (FPR) than OR method. Analysis also shows that RTA-2 possesses equal TPR, FPR, and BA with the detection of movement intention using sEMG-based system. Although the RTA-2 method shows …
