Construction Engineering and Management Commons^™

The Effects Of Lean Intervention (5s) On Perceived Musculoskeletal Workload And Perceived Hazardous Working Conditions In A Health Center Pharmacy, Jastinder Singh Dhindsa

LSU Master's Theses

The healthcare industry involves a significant level of health and safety risks in various work processes, and healthcare professionals are at risk for work-related musculoskeletal disorders and other health problems. In recent years, Lean has been introduced in healthcare with the goal of eliminating waste and improving efficiency. Lean is also believed to affect the health and safety of workers. The present research studies the effects of Lean (5S) implementation in an acute care pharmacy of a health center. A version of the Dutch Musculoskeletal Questionnaire (DMQ) was used to record the perceived musculoskeletal workload and perceived hazardous working conditions. …

The Impact Of 5s On The Safety Climate Of Manufacturing Workers, Siddarth Srinivasan

LSU Master's Theses

The occupational injury rate in the manufacturing sector is higher than the average of all private industries, necessitating safety studies. Occupational safety can be measured through different approaches. Safety climate, a predictive measure of safety, studies the workers’ perceptions of safety of the workplace. This measure includes several dimensions of safety like management commitment, involvement and work place hazard evaluation and was chosen as a method of evaluation in this study. Even though occupational safety is an important concern, management often prioritizes reducing waste and cost. So, there is a necessity for some technique which reduces waste and simultaneously improves …

Impact Of Lean Production On Workers' Exposure To Risk In Modular Home Building Manufacturing, Joel James

LSU Master's Theses

The construction industry records the highest number of work-related injuries and fatalities in the United States according to the Bureau of Labor Statistics. Workers’ exposure to risk may be affected by implementing Lean concepts. This study describes the effects on worker’s safety environment after a Kaizen event, a Lean tool, conducted in three workstations within a modular home manufacturer: base-framing, sheet-rock hanging, and painting. The effects of Lean on safety hazards at each of the three workstations were determined by conducting a Job Safety Analysis (JSA) before and after each Kaizen. Based on the JSAs a risk assessment tool (questionnaire) …

Pvc Stay-In-Place Panel Covers For Tilt-Up And Pre-Cast Construction, Purdue Ect Team

ECT Fact Sheets Archive

Octaform™ stay-in-place concrete forming system is PVC insulated concrete form system. These forms have been used in the industry for various applications to improve the insulation and corrosion resistance of structures. Octaform™ has developed the panel covers so the advantages of PVC stay-in-place concrete forming systems could be applied to tilt-up and pre-cast construction.

Conx Chassis System, Purdue Ect Team

ECT Fact Sheets Archive

Often referred to as a full-scale “Erector Set”, the ConX System applies technology to the building industry resulting in dramatic efficiencies. The systems approach is made possible by employing automated and efficient processes, from design through fabrication, shipping, and field assembly.

Nightbreeze™: Integrated Heating, Ventilation And Cooling System, Purdue Ect Team

ECT Fact Sheets Archive

NightBreeze™ provides ventilation cooling automatically, eliminating the necessity of operating windows. NightBreeze™ uses the heating/air conditioning system fan to bring in filtered outside air and flush out warm, stale indoor air. The system also allows you to select the lowest temperature you want the house to reach overnight.

Cmic Xprojects, Purdue Ect Team

ECT Fact Sheets Archive

xProjects is a cloud based collaboration and project management solution that resolves the interoperability issues associated with integrated project delivery (IPD) and electrifies the IPD process by enabling capital project owners to collaborate seamlessly with multiple project stakeholders. Using XML adapters to create connections between systems, CMiC Real Time Integration (RTI) tags data so it can be transferred bi-directionally between participants within the project ecosystem with no loss of information or the need for re-entry.

Autodesk Buzzsaw®, Purdue Ect Team

ECT Fact Sheets Archive

Autodesk® Buzzsaw® is a software solution enabling the successful execution of construction projects through a central database, collaboration and communication with access control. The software has capacities of exchanging and viewing drawings, schedule reminders and specifications. Users can directly comment on AutoCAD drawings with the date of comment and name of commenter displayed.

Bidtool.Net: An Integrated Web-Based Approach For Commercial Bid Data Management And Networking, Purdue Ect Team

ECT Fact Sheets Archive

BidTool is basically a web-based portal that allows the distribution and transfer of key commercial construction project data. Owners, architects, designers, engineers, estimators, contractors, material suppliers & construction professionals find track and manage everything from architectural plans specifications and renderings to action items and scheduling requirements such as bid due dates, pre bid meetings and bid results.

Contour Crafting, Purdue Ect Team

ECT Fact Sheets Archive

Victims of disasters such as floods, earthquakes and war have to seek shelter elsewhere. A need arises to rapidly construct houses on site and at minimal cost. This will eliminate the need to transport pre-fabricated shelters long distances, saving the time and costs associated with transportation. Since Contour Crafting is an automated process, labor needs are highly minimized allowing relief workers to allocate their time and effort to rebuilding local infrastructure such as water sanitation and distribution systems, roads, electrical and communication systems as well as irrigations systems.

Super Flex Wall - New Frame System For High Rise Buildings, Purdue Ect Team

ECT Fact Sheets Archive

The "Super Flex Wall" is a structural frame method newly developed by the Takenaka Corporation, used in combination with a core wall (the earthquake-resistant reinforced concrete wall penetrating through the center of the building from the lower part to the top floor) and a structural control method or with a base-isolation method. Part of the structure is cantilevered from the central core along the periphery of the building.

Carbon Frp Grid Structures For Use In Reinforcing Concrete, Purdue Ect Team

ECT Fact Sheets Archive

Carbon FRP Grids are structural reinforcement materials that improve the performance of concrete structures such as insulated wall panels, architectural panels, double tee parking garage tee beams, concrete countertops and other products. The carbon grids can be used in place of welded wire mesh in most structures and is imbedded the same way as a welded wire mesh.

Conx Space Frame System, Purdue Ect Team

ECT Fact Sheets Archive

Off-site manufacture is one of the key initiatives being used by contractors to achieve these goals. Sandwich Plate System (SPS) Floors deliver a compelling off-site solution for structural floors. Their composite steel panels provide a similar performance to concrete floors at one quarter the weight, 10 - 15% shorter project schedules and broader benefits such as reduced complexity and the elimination of the majority of wet-work above ground level.

Commercial Construction Supply Chain Management Issues Involving Traveling Contractors, Fred Akers

Masters Theses

Supply chain management (SCM) is an important aspect of running any business. To stay competitive in today's marketplace a supply chain management system must be in place to achieve success in this volatile global environment (Fewings, 2005).

This research differentiates the issues between executing a construction project close to home compared to away from home. Being away from home, there typically is no supplier relationship established. Furthermore, the research intends to document certain issues of the commercial construction industry that develop during the execution of a project. This will be based on the comparison of having or not having an …

Bridge Deck Cracking Investigation And Repair, Vidal Velez Vargas

UNF Graduate Theses and Dissertations

The focus of this study is to investigate the cracking of concrete bridge decks and the sealants used in repairing transverse cracks. Cracking could occur in both hardened mature concrete and early age concrete. Several factors affect concrete cracking, such as age-dependent material properties, thermal- and moisture-related stresses and strains, material viscoelastic behavior, restraints, concrete expansion and contraction, casting sequence, formwork, material characteristics, and environmental exposure. The causes of early age cracking are primarily attributed to effects such as plastic shrinkage, temperature effects, autogenous shrinkage, and drying shrinkage. This deck cracking could greatly reduce durability, lead to a loss of …

The Repair Of Laterally Damaged Concrete Bridge Girders Using Carbon Fiber Reinforcing Polymers (Cfrp), Matthew Kent Graeff

UNF Graduate Theses and Dissertations

In recent years the use of carbon fiber reinforcing polymers (CFRP) to repair damaged structural components has become more accepted and practiced. However, the current reference for designing FRP systems to repair and strengthen reinforced concrete (RC) and prestressed concrete (PSC) girders has limitations. Similarly, very few resources address solutions for the debonding problem associated with CFRP laminates or the use of CFRP laminates to repair structural members with pre-existing damage. The included experimental program consists of testing both RC and PSC girders with simulated lateral damage and CFRP repairs. A total of 34 RC beams were statically tested under …

Safety Issues Among Hispanic Construction Workers Along The Wasatch Front In Utah, Phavel Israel Loayza Chahuayo

Theses and Dissertations

During the last few decades immigration by foreigners seeking work in the construction industry in the United States has increased dramatically. Of those seeking jobs in construction, Hispanics represent the largest and fastest growing population. The proportion of reportable accidents among Hispanic on-site construction workers in the United States is higher than that of non-Hispanics. This trend of on-site construction accidents is evident not only in states that have traditionally high populations of Hispanics, such as New York, Florida, California, Arizona, and Texas, it is also manifested in the State of Utah. This research focused on causes of accidents among …

Determining A Community Retrofit Strategy For The Aging Housing Stock Using Utility And Assessor Data, Nathan A. Barry

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Residential buildings account for about 21.5% of the nation’s primary energy consumption and carbon emissions, and about 38% of electricity use. The housing stock in the United States consists of over 128 million residences with over 60% being constructed prior to 1979 when building codes and regulations began standardizing building practices. Seeking an opportunity to understand and reduce consumption, the scientific community developed a number of model-driven auditing software. While these computer models have been successful in predicting usage patterns in newer residential structures, they have been inaccurate in predicting and analyzing energy use in aging housing stock, predominantly homes …

Utilizing Technology To Increase The Recycled Content Of Asphalt Mix Designs, Nicholas Ricketts

Purdue Polytechnic Masters Theses

This directed project examined the idea that increasing the amount of recycled asphalt product in road construction will result in a comparable performance to the current levels of recycled asphalt product in today’s pavement. A critical review of literature is structured in four areas: describing the need (financial and environmental) for the increased use of recycled materials, describing how others have addressed the issue and technology needed for increasing the use of recycled content, describing how some contractors have created the technology needed, and finally describing the direction needed in order to encourage customers and government agencies to embrace the …

Combined Heat, Air Moisture And Pollutant Simulations (Champs) For Buildings, Jianshun Zhang, Menghao Qin

Mechanical and Aerospace Engineering - All Scholarship

No abstract provided.