Civil Engineering Commons^™

Geophysical Assessment Of Internal Erosion Damage At The Crawford County Levee, Samuel Ross Hokett

Graduate Theses and Dissertations

Levee failures during flooding events can result in catastrophic loss of life and property. Soil erosion during high water events is a primary cause of levee failures. Accordingly, this research focuses on the geophysical assessment of internal erosion damage in levees. This thesis presents a case study utilizing Capacitively Coupled Resistivity (CCR), Direct Current Electrical Resistivity Tomography (DC ERT), and Multichannel Analysis of Surface Waves (MASW) to assess internal erosion damage at the Crawford County Levee System in Van Buren, AR, that occurred during the 2019 Arkansas River flood. Geophysical surveys acquired included longitudinal CCR, DC ERT, and MASW lines …

Analyze The Effect Of Urbanization And Development Over The Flow Regime And River Channel Hydraulics Of The Big Bear Creek Channel, Machiraju Pakasasana Kashyap

Civil Engineering Theses - Archive

This thesis focuses on investigating the influence of urbanization and development on flow regime and river channel hydraulics in the Bear Creek watershed, Texas using a comprehensive set of hydrologic and 1D/2D coupled hydraulic model. The Bear Creek watershed, located in North Texas, has experienced rapid urbanization and land development in recent years, raising concerns about the potential impacts on hydrological processes and the hydraulic behavior of the river system. To address these concerns, this research utilizes an integrated modeling approach, combining the HEC-HMS and HEC-RAS software tools, to assess changes in flow rates and simulate their effects on river …

Performance Of Percussion Driven Earth Anchors For Riverbank Slope Stabilization: Comprehensive Laboratory And Field Studies, Natnael Tilahun Asfaw

Civil Engineering Dissertations - Archive

ABSTRACT: The unpredictability of the stability of embankment slopes is a recurring problem that threatens the safety of the traveling public, as it compromises the integrity of the structures built on them. Slopes that undergo seasonal variations of stream flow are of particular concern, as they are usually located under a bridge structure that spans a stream, and the meandering of the stream flow, the seasonal variations of the flow depth, and the velocity in the channel induce scouring and increase the risk of the bridge failing. Departments of transportation have long attempted to address these concerns by designing systems …

Optimization Of Primary Chemical Feed Rates And Application Points At An Existing Potable Water Treatment Plant, Brently Keith Jordan

Civil Engineering Theses - Archive

Due to a major upset in the treatment processes for the Dallas County Park Cities Municipal Utility District caused by a required change in treatment techniques, an optimization study was conducted to find the best treatment strategies for the primary coagulation, flocculation, and settled processes for the treatment plant. A methodology for determining how to optimize jar testing while injecting both ferric sulfate and calcium hydroxide in an almost simultaneous manner was developed, and a large number of jar tests were conducted to determine both the best dosages and the best application points of the two chemicals. As a result …

Use Of Smartphone Apps While Driving: Variations On Driving Performances, Perceived Risks And Behaviors, Juana Perez

Civil Engineering Theses - Archive

ABSTRACT: Distracted driving increases the crash frequencies on the road and subsequently leads to fatalities involved with crashes. As technology has evolved, drivers are continuously exposed to newer technology in their vehicles and applications in their phones, which has led to technology representing one of the main secondary tasks that distract drivers on the road. The impact of technology-involved distraction appears to be different by the type of distraction since a secondary task that can be exceedingly distracting to the driver causes more reckless and risky driving. Moreover, the impact of distracted driving may differ by roadway geometries since distracted …

Formal Processes For Inspecting Bridge Deck Drains Using Lidar And Photogrammetry, Ahmad Kamal Bani Hani

Civil Engineering Dissertations - Archive

ABSTRACT: Poor-performing bridge deck drains result in water standing on the bridge deck. The standing water threatens the safety of bridge users and deteriorates bridge structural elements. Bridge deck drains are only inspected biennially, and they do not impact the bridge rating established from inspections. Furthermore, literature shows that visual inspection results are sometimes skewed due to human errors. In this regard, a part of this research was conducting a survey study to help identify the problems with deck drains to help transportation agencies minimize the consequences of poor drainage. Another part of this research was to create a convolutional …

Application Of Photogrammetry For Monitoring Soil Surface Movement, Arjan Poudel

Civil Engineering Theses - Archive

Understanding slope behavior and forecasting failure requires accurate soil surface movement measurements. Research gaps and constraints remain despite the development of diverse methods. Recently, photogrammetry has become a promising method for detecting soil surface movement. This method involves setting coded targets and ground points on the soil surface, taking photographs before and after the movement, and using photogrammetric software to measure accurately. However, past studies have mostly used high-end cameras with excellent resolution and geotagging, which may not have been available in all contexts. Thus, this study compares the accuracy and precision of geotechnical soil surface measurement with a consumer-grade …

Impacts Of Diagonal Crosswalk Misuse, Elizabeth Francis

Civil Engineering Undergraduate Honors Theses

A diagonal crosswalk paired with an all-red phase traffic signal is an effective approach to manage intersections with high pedestrian volume. This allows pedestrians to cross both north-south and east-west bound roads at the same time. However, ineffective diagonal crosswalk marking, and lack of signs reduces the use of diagonal crosswalks which in turn results in jaywalking, often in unsafe capacities. The objective of this study is to determine the impacts of pedestrian-caused delay and safety impacts due to the misuse of a diagonal crosswalk. To better understand the impacts, a camera-based data collection was conducted during a four-hour period …

An Experimental And Numerical Investigation Of The In-Plane Shear Behavior Of Cantilever Cross-Laminated Timber Diaphragms, Bibek Bhardwaj

All Dissertations

This research focuses on investigating the behavior of Cross Laminated Timber (CLT) diaphragms under in-plane shear loads through an experimental, analytical, and numerical approach. Full-scale destructive tests were conducted on cantilever CLT diaphragms to measure their response to cyclic loading. The results showed that the ultimate capacity of the diaphragms was primarily influenced by the fasteners used and exceeded the LRFD capacity. The primary energy dissipation mechanism was through the slip of diaphragm components and rotation of CLT panels due to fastener deformations. The strain data revealed that the diaphragms exhibited deep-beam-like behavior, with resistance to tensile and compressive forces …

Trace Dna Detection Using Diamond Dye: A Recovery Technique To Yield More Dna, Leah Davis

Master's Theses

This study aspires to find a new screening approach to trace DNA recovery techniques to yield a higher quantity of trace DNA from larger items of evidence. It takes the path of visualizing trace DNA on items of evidence with potential DNA so analysts can swab a more localized area rather than attempting to recover trace DNA through the general swabbing technique currently used for trace DNA recovery. The first and second parts consisted of observing trace DNA interaction with Diamond Dye on porous and non-porous surfaces.

The third part involved applying the Diamond Dye solution by spraying it onto …

Force Coefficients And Wind Loads For Wide Flange Section And Retrofitted Pipe Racks, Sovanroth Ou

All Theses

While relatively rare, the failures of steel structures occasionally occur due to extreme wind events such as hurricanes and tornadoes. The American Society of Civil Engineers (ASCE) provides well-defined guidelines for determining wind loads for regular buildings; nonetheless, the actual wind loads for complex open-frame steel structures are not as clearly understood by practicing engineers. Pipe bridges and pipe racks are open-frame structures, commonly used in many petrochemical plants. Over the years, additional pipes are often added to existing pipe racks or pipe bridges to accommodate changes in the operation needs of the petrochemical plant. The objectives of this study …

Ranking Highway Transportation Asset Criticality Through Stakeholder Input Using The Analytical Hierarchy Process (Ahp), Kwadwo Amankwah-Nkyi

Graduate Theses and Dissertations

The transportation system is especially vulnerable to natural and human-made disasters which can have effects on mobility, safety, and the economy. This thesis presents a method to rank transportation assets based on their criticality to the transportation system by uniquely gathering stakeholder input on criticality criteria weights. This serves as a typical first step in vulnerability and resilience assessments. Six criteria were used to estimate asset criticality: Annual Average Daily Traffic (AADT), roadway classification, freight output, tourism output, Social Vulnerability Index (SoVI), and redundancy. Then, the criteria are combined via stakeholder input using a weighted ranking scheme called the Analytical …

Non-Destructive Means Of Predicting Masonry Prism Strength Using Ultrasonic Pulse Velocity (Upv), Connor J. Barlow

UNLV Theses, Dissertations, Professional Papers, and Capstones

Current ASTM standards call for grouted masonry prisms to be tested for compressive strength at 28-days to ensure compliance with the structural design. In the event of failing tests, the subject samples may require redesign or reconstruction which can pose problems due to ongoing development around and including the prisms between the time of placement and obtaining test results. The purpose of this research is to determine if the use of ultrasonic pulse velocity (UPV) testing can be utilized to determine a correlation between prism composite strength of the masonry prism with ultrasound readings as to provide preliminary means of …

Enhancing Security At Baxter Arena, Jennifer Davis

Theses/Capstones/Creative Projects

The purpose of this report is to detail two options proposed for enhancing security at Baxter Arena. Both options are focused on metal detection. In this report we will look at the benefits and negatives of metal detection, both handheld and stationery, and how it can be used in enhancing building security.

Using Metal-Organic Frameworks (Mofs) In Producing Self-Curing Concrete, Lama Fathi Allan

Theses

Curing of concrete is the presence of adequate moisture content in concrete throughout its early stages to produce the desired properties, as it is significant in improving the concrete microstructure and pore structure and hence in developing its performance and durability. However, good curing is not always practical in several cases, such as in hot weather regions and areas of water inadequacy. For that reason, the need to develop self-curing concrete attracted several researchers. The use of self-curing agents minimizes the water evaporation from concrete and consequently increases its water retention capacity compared to conventional concrete. This thesis is concerned …

Pyrolysis—A Tool In The Wastewater Solids Handling Portfolio, Not A Silver Bullet: Benefits, Drawbacks, And Future Directions, Patrick J. Mcnamara, Zhongzhe Liu, Yiran Tong, Hari Santha, Lynne Moss, Daniel Zitomer

Civil and Environmental Engineering Faculty Research and Publications

Pyrolysis is the process whereby carbonaceous materials, such as biosolids, are heated between 400°C and 900°C in the absence of oxygen. Three main products are generated: a solid product called biochar, a py-liquid that consists of aqueous phase and non-aqueous phase liquid, and py-gas. The biochar holds value as a beneficial soil amendment and sequesters carbon. The py-liquid is potentially hazardous and needs to be dealt with (including potentially reducing it on-site via catalysis or thermal oxidation). Py-gas can be used on-site for energy recovery. Pyrolysis has gained recent interest due to concern over per- and polyfluoroalkyl substances (PFAS) in …

Slo Botanical Garden Deck, Noah E. Demer

Architectural Engineering

This project consists of the design and construction of an outdoor-use deck. This deck is to be located in the NE corner of the Sage Meadow at the San Luis Obispo Botanical Garden at 3450 Dairy Creek Rd, San Luis Obispo, CA 93405. This deck’s intended use is as a gathering area for people to congregate. Originally, the ideal deck area was proposed as 700+ square feet, but with further site and project limitations the final design was ~480 square feet. This deck has not been constructed.

Characterization And Modeling Of Unbound And Cementitiously Stabilized Materials For Structural Analysis Of Multilayer Pavement Systems, Edgar Daniel Rodriguez Velasquez

Open Access Theses & Dissertations

The incorporation of cement for soil improvement is a sustainable solution for utilizing marginal materials in the construction of new pavements and the rehabilitation of existing roadway systems. To effectively design and assess the performance of pavement structures, it is crucial to determine the strength and resilient properties of cementitiously stabilized aggregates. Accurate determination of the Unconfined Compressive Strength (UCS), tensile strength, and Resilient Modulus (Mr) is of utmost importance for thoroughly characterizing the structural capacity of pavement layers through a mechanistic approach.The tensile strength of stabilized materials can be assessed in a laboratory setting through the implementation of two …

Optimizing Laboratory Curing Conditions For Hot Mix Asphalt To Simulate Field Behavior, Benjamin Arras

Open Access Theses & Dissertations

The engineering properties of asphalt mixtures change with time. Shortly after placement, asphalt concrete (AC) layers are more susceptible to rutting. As the pavement ages, the AC layer becomes stiffer, brittle, and thus more susceptible to cracking. Current protocols provide guidelines for the selection of materials, the determination of the material proportions (e.g., aggregates and binder content), and the evaluation of the engineering properties (e.g., cracking and rutting potentials) of any given asphalt mix design. However, these protocols do not consider the impact of aging on the mixture. This study investigated existing and novel laboratory methods to determine protocols that …

An Approach For Verification Of Traffic Speed Deflectometer Measurements, Mahsa Beizaei

Open Access Theses & Dissertations

Recent research studies have shown the usefulness and applicability of Traffic Speed Deflectometers (TSD) in support of the network-level pavement management process. There are, however, no accepted procedures for verification and validation of the TSD measurements to be utilized by practitioners. To address this need, TSD measurements may be verified with the data obtained by widely accepted road-testing equipment, Falling Weight Deflectometer (FWD). In this study, TSD and FWD operations on pavement sections were simulated employing the finite layer approach which resulted in the development of a comprehensive database of pavement responses. Using the established numerical simulation database, theoretical relationships …