Civil Engineering Commons^™

Rapid Condition Assessment Of Bridges By Falling Weight Deflectometer, Jeremy David Rawn

Graduate Theses and Dissertations

The objective of this thesis is to investigate the feasibility of using a Falling Weight Deflectometer (FWD) as an impact source to rapidly assess the condition of an in service bridge through the evaluation of its modal properties. Tests were conducted on two bridges, a Parker Pony Truss and a modern concrete deck on rolled steel beam bridge. Two full tests were performed on these structures with a hand held impact hammer and a falling weight deflectometer as sources for excitation. The advantage of using a FWD is that many transportation agencies already use these machines for pavement testing and …

The Investigation Of Cold-Mix Asphalt Creep Stiffness Testing Using Multiple Test Apparatuses And Gradations, Alexander Jackson

Graduate Theses and Dissertations

Many current methods of designing and testing Cold In-Place Recycled (CIR) asphalt are undesirable because they require large amounts of material and significant preparation. In an effort to lessen the cost and time of materials testing, this research utilizes several different methods of small scale testing of creep stiffness. These methods include using a Discovery Hybrid Rheometer (DHR) and a three point bending test to find the creep stiffness of emulsion based CIR. The new testing methods utilized samples on the scale of up to a hundredth the size of what the traditional methods of testing require. The two smaller …

The Characterization Of Foamed Asphalt Binders Using A Rotational Viscometer, John William Ryan

Graduate Theses and Dissertations

Foamed asphalt is a popular technic of vaporizing water into asphalt binder that falls under the umbrella term of warm-mix asphalt. In order to understand how to adjust mix designs for the use foamed asphalt, methods must be developed for characterizing different foamed asphalt binders. One way to characterize the asphalt binder is through viscosity testing using a rotational viscometer. The standard method of using a viscometer to measure the viscosity of asphalt binder is insufficient when dealing with foamed asphalts, so a new method has been created along with 4 metrics to analyze the data to characterize foamed asphalt …

Development Of A Visualization System For Highway Safety Management Using Safety Analyst, Indira Khanal

UNLV Theses, Dissertations, Professional Papers, and Capstones

The AASHTOWare software, Safety Analyst, is a state-of-the-art tool with significant capabilities and advanced analytical methods for comprehensive analysis and management of highway safety. However, currently, this tool provides very limited visualization capabilities. To address this limitation, this study proposes a Visualization System for Safety Analyst that provides graphical displays, including location and color-coded information for each module. In addition, the system generates charts, which have various degrees of resolution and aggregation; tables; and a report summarizing safety performance measures. The system can use Google Maps and/or ESRI ArcGIS to generate the graphical displays. The advantage of using Google Maps …

Effect Of Particle Shape And Size On Compressibility Behavior Of Dredged Sediment In A Geotextile Tube Dewatering Application, Louis Lafata

Renée Crown University Honors Thesis Projects - All

Each year, more than 250 million cubic yards of sediment need to be dredged from U.S. ports, harbors and waterways to maintain navigability. This is accomplished by dredging, the process of excavating submerged sediment by means of scooping or suction. Dredged sediments have low solids content, typically between 10% and 20% for hydraulic dredging. Geotextile tubes are one of many methods utilized to dewater these sediments, which is a process of removing water from sediment that contains low percent solids. Understanding the engineering behavior of slurries inside geotextile tubes is critical for the evaluation of the properties of the dewatered …

Developing A South Carolina Traffic Incident Management Plan Along The I-26 Corridor Between Columbia And Charleston, Laura Rowe

All Theses

Traffic Incident Management (TIM) programs are used in many states across the nation to efficiently clear interstate incidents and alleviate congestion in response to incidents. The overarching goal of this research is to maintain safety of the motoring public and incident responders while reducing congestion, secondary collisions, and traffic delays from incidents that occur on South Carolina highways. To reduce incident clearance times along the I-26 corridor between Columbia and Charleston through the implementation of a Traffic Incident Management (TIM) Program, several objectives for this thesis were established to move toward the goal, including; defining gaps between national TIM best-practices …

Investigation Of Warm Mix Asphalt Overlays And Geosynthetic Pavement Interlayers, William Bolger

All Theses

Geosynthetics play an ever increasing role in enhancing pavements. The construction of asphalt overlays with geosynthetic interlayers is a common method to rehabilitate flexible and rigid pavements. Geosynthetic interlayers provide numerous benefits to a pavement system. When utilized properly, geosynthetic interlayers can prevent water from infiltrating a roadway base and can extend the life of a pavement and assist in absorbing stresses. Geoysnthetics lead to an increase in a pavement overlay's performance and also retard reflective cracking. Warm mix asphalt has become more popular as a result of the search for more sustainable construction practices. WMA and its technologies are …

Clemson University Science Master's Program In Sustainable And Resilient Infrastructure: A Program Evaluation, Elizabeth O'Sell

All Theses

The Clemson University Science Master's Program (SMP) in Sustainable and Resilient Infrastructure is a program which aims to link engineering, materials, construction, environment, architecture, business, and public policy to produce graduates with unique holistic perspective and expertise to immediately contribute to the workforce in the area of sustainable and resilient infrastructure. A program evaluation of the SMP has been performed to study the effectiveness of the SMP and identify areas where the goals and vision of the SMP are achieved and areas where improvements can be made. This was completed by analysis of trends within survey responses, review of Master's …

Preliminary Evaluation Of Kenaf As A Structural Material, Andrew Sheldon

All Theses

Kenaf (Hibiscus cannabinus L.) is an annual fiber plant that is kin to cotton and okra and native to east-central Africa, though it is currently grown in numerous locations around the globe. The plant's apparent high strength and light weight along with its environmental and sustainability advantages makes it a good candidate for use in structural materials. The goal of this study was to design a kenaf product that resembled parallel strand lumber and required minimal processing of the kenaf. The mechanical properties of the two main components of kenaf, the bast fibers and the core, were evaluated using experimental …

Influence Of Different Rubber Modified Binder Variables On Performance Properties Of Porous Asphalt Mixtures, Katelyn Love

All Theses

Porous asphalt is a type of pavement in which surface water can permeate down into the subbase below. Open graded friction course (OGFC) is a type of porous asphalt often used as a surface course on top of dense graded pavements on high speed roadways. Due to an increase in waste tires, rubber modified asphalt has become an increasingly popular material around the world, including the US. The rubber modified asphalt is created by utilizing processed rubber particles blended into the mixture. This research investigated the effects of rubber modified binder on the performance of porous asphalt by evaluating the …

Numerical Simulation Of Flow In Ozonation Process, Jie Zhang

USF Tampa Graduate Theses and Dissertations

In the last two decades, Computational Fluid Dynamics (CFD) has shown great potential as a powerful and cost-efficient tool to troubleshoot existing disinfection contactors and improve future designs for the water and wastewater treatment utilities.

In the first part of this dissertation two CFD simulation methodologies or strategies for computing turbulent flow are evaluated in terms of the predicted hydraulic performance of contactors. In the LES (large eddy simulation) methodology, the more energetic, larger scales of the turbulence are explicitly computed or resolved by the grid. In the less computationally intensive RANS (Reynolds-averaged Navier-Stokes) methodology, only the mean component of …

The Development Of Empirical Models To Evaluate Energy Use And Energy Cost In Wastewater Collection, David Young

All Dissertations

This research introduces a unique data analysis method and develops empirical models to evaluate energy use and energy cost in wastewater collection systems using operational variables. From these models, several Best Management Processes (BMPs) are identified that should benefit utilities and positively impact the operation of existing infrastructure as well as the design of new infrastructure. Further, the conclusions generated herein display high transferability to certain manufacturing processes. Therefore, it is anticipated that these findings will also benefit pumping applications outside of the water sector. Wastewater treatment is often the single largest expense at the local government level. Not surprisingly, …

Dynamic Excitation Related Uncertainty In Ambient Vibration Testing Of A Truss Bridge, Ryan T. Dufour

Civil Engineering Undergraduate Honors Theses

The aging and deteriorating state of bridges in the US, along with the many limitations of the visual inspection data that is used for assessing and evaluating their condition, have provided motivation for research on experimental methods to quantitatively describe and evaluate their in-situ performance and condition. Ambient vibration testing is one such global characterization approach that has been widely explored due to its low cost and ease of implementation for in-service bridges. The testing is used to identify the modal properties of the structure, typically the natural frequencies, mode shapes, and damping ratios. Although ambient vibration testing has been …

Evaluation Of The Effects Of Dynamic Excitation Characteristics On Ambient Vibration Test Results For A Multi-Girder Bridge, Gibran Santana

Civil Engineering Undergraduate Honors Theses

The bridge population in the US is currently aging and deteriorating rapidly. More than 30% of the bridges across the country have already exceeded their expected design life. Therefore, it is important to develop more timely, reliable and quantitative alternatives to the qualitative visual inspection approach that is currently used to evaluate these structures. One experimental approach that has been researched extensively for quantitatively characterize bridges is Ambient Vibration Testing (AVT) also known as Operational Modal Analysis (OMA). In this approach, the vibration responses of a structure due to unmeasured and uncontrolled ambient dynamic excitation are measured and analyzed to …

Temperature Sensitivity Of Foamed Warm Mix Asphalt, Ryan Michael Hagedorn

Civil Engineering Undergraduate Honors Theses

Foamed warm mix asphalt (WMA) is a technology that is beginning to be utilized across the United States. Often, producers are placing foamed WMA at decreased temperatures without fully understanding the properties of this relatively new product. By studying the volumetric properties of laboratory produced foamed WMA, this study sought to better understand the temperature sensitivity of foamed WMA and the potential factors that contribute to this sensitivity. Two mix designs containing primarily limestone aggregate were tested using differing binder grades. It was determined that binder grade, binder source and potentially the inclusion of recycled asphalt pavement all influence how …

Examination Of Nitrogen To Phosphorus Ratio In Nutrient Removal From Wastewater Through Chlorella Vulgaris, Courtney L. Hill

Civil Engineering Undergraduate Honors Theses

A need for phosphorus removal is becoming increasingly evident as some wastewater treatment plants struggle to meet wastewater effluent nutrient requirements. High nutrient levels in wastewater effluents have also caused ongoing tension between the state of Oklahoma and Arkansas regarding the pollution of the Illinois River. This research seeks to establish the relationship between nitrogen to phosphorus ratio in wastewater and the level of nutrient reduction using Chlorella vulgaris. Seed cultures of Chlorella vulgaris were added into solutions with various ratios of nitrate to phosphate representative of treated domestic wastewater and the removal of nitrogen and phosphorus were measured in …

Shear Capacity Of Prestressed Lightweight Self-Consolidating Concrete, Micah Alan Wyssmann

Civil Engineering Undergraduate Honors Theses

In prestressed members, self-consolidating concrete (SCC) has in some cases exhibited lower shear capacity than conventional concrete, which has been attributed to decreased aggregate interlock. However, little data is currently available to assess whether use of lightweight aggregate in prestressed SCC beams has further impact on aggregate interlock and shear strength. This study measured the shear capacity of six prestressed beams made from three different concrete mixtures: lightweight self-consolidating concrete (LWSCC) with expanded shale aggregate, LWSCC with expanded clay aggregate, and control normal weight SCC with limestone aggregate. Predicted shear capacities were determined based on current ACI Building Code and …

An Assessment Of The Emas Pump And Its Potential For Use In Household Water Systems In Uganda, Jacob Daniel Carpenter

USF Tampa Graduate Theses and Dissertations

Rural improved water supply coverage in Uganda has stagnated around 64% for a number of years and at this point more than 10 million rural people do not have access to an improved drinking water source. It has been recognized that progress toward improved water supply coverage and increased service levels may be gained through Government and nongovernmental organization (NGO) support of private investment in household and shared water supplies, commonly known as Self-supply. Self-supply can be promoted by introducing and building local capacity in appropriate and affordable water supply technologies such as hand-dug wells, manually drilled boreholes, low-cost pumps, …

Causes And Countermeasures For Nappe Oscillation: An Experimental Approach, Aaron Allan Anderson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Weirs are commonly used as spillways to release flows from a reservoir. The freefalling jet on the downstream side of the weir is called the nappe. Under certain hydraulic conditions, determined mainly by the size, design, and construction of the weir, nappe oscillation, otherwise known as nappe vibration, can occur. Characteristics of this dynamic behavior include excessive acoustic energy manifested as sound pressure waves and lowfrequency noise accompanied by horizontal waves or banding on the nappe. Mitigation of this process may be required, especially if the weir operates in close proximity to occupied structures. Instability of water jets moving through …

Bs News May/June

Building Services Engineering

No abstract provided.