Civil Engineering Commons^™

Flood Disaster Resilient Bridge Structures For Sustainable Bridge Management Systems, Alper Durmus

Electronic Theses and Dissertations

Extreme weather events are occurring at an increasing ferocity and frequency. Floods are the most comand damaging natural disaster. More than 4,400 occurrences of flood disasters have been reported globally between 1900 and 2016. As a result, around seven million people were killed and millions more were displaced. Climate impacts are expected to intensify weather related flooding events, and sea level rise expected worldwide will increase the risk of coastal disasters. Transportation infrastructure, vital to the economy and society of every country, is especially prone to the inland and coastal floods. Bridge structures are under the constant threat of these …

Characterization Of Human-Induced Vibrations, Benjamin Thomas Davis

Theses and Dissertations

In the US alone, 20% of citizens will be over the age of 65 by the year 2030, and the largest challenge facing this growing demographic is not a new disease but a simple motion - the fall. These events are the premier cause of fatal and nonfatal injuries. In fact, a fall is so common that every 17 seconds an older adult is treated for fall-related injuries, and every 30 minutes, an older adult dies from fall complications. Research has shown a positive outcome of a fall event is largely dependent on the immediate response (<30 minutes) and rescue of the person.

This work explores …

Deposits Emplaced In Upper Regime, Ricardo Rafael Hernández Moreira

Theses and Dissertations

Relatively common to the submarine setting are depositional sequences that begin with a lower erosional boundary, followed in ascending order by a either a graded or an inherently massive basal unit, a relatively coarse parallel laminated unit, a cross laminated unit, a relatively fine parallel laminated unit, and a capping layer of massive mud. These sequences are present in turbidity current, coastal storm and tsunami deposits, and their study is the key to understanding the physical processes governing sediment transport, erosion and deposition in submarine settings, to the reconstruction of global paleoclimate and paleoflow, to the exploration of hydrocarbon reservoirs …

Use Of Biochar-Ultrafiltration Membrane Processes For Removal Of Humic Acid, Vaibhavi Shankar

Theses and Dissertations

The performance of an ultrafiltration (UF)-biochar process was evaluated in comparison with a UF membrane process for the removal of humic acid (HA). Bench-scale UF experiments were conducted to study the rejection and flux trends under various hydrodynamic, pH, conductivity, and pressure conditions. The resistance-in-series model was used to evaluate the processes and it showed that unlike stirred conditions, where low fouling resistance was observed, comparable trends were obtained for UF-biochar and UF alone for unstirred conditions. Thus, the processes were further evaluated under unstirred conditions. Additionally, total fouling resistance was decreased in the presence of biochar, indicating that HA …

Modeling Embankment Breach Due To Overtopping, Ali Asghari Tabrizi

Theses and Dissertations

Despite numerous embankment failures around the world, in-depth assessments as well as reliable, comprehensive sets of data of such failures are limited. Detailed understanding of the earthen embankment failure process and the dominant parameters affecting the failure are needed to predict and model the breach process precisely. Therefore, a series of laboratory experiments on embankment (i.e., dam and levee) overtopping as well as erodibility measurements using the Submerged Jet test are conducted. Also, to study the influence of different model parameters (e.g., turbulence model, bedload formula), one of the dam embankment experiments is simulated. The main goal of this research …

Shear Behavior Of Reinforced Fly Ash-Based Geopolymer Concrete, Noor S. Yacob

Masters Theses

"The geopolymerisation of aluminosilicate materials such as fly ash has been a radical change in construction material's chemistry and composition, compared to the portland cement-based concrete calcium silicate-hydrate chemistry. The adoption of fly ash in concrete industry is a good use of by-product ashes to reduce emissions of the greenhouse gas implicitly. However, in this research, the replacement of portland cement by fly ash is 100%, which makes it a zero-cement concrete with no proprietary chemical additives.

Geopolymer concrete (GC) is a revolutionary synthetic material that combines sustainability and high engineering properties, and it is relatively cost-effective compared to portland …

Microwave Material Characterization Of Alkali-Silica Reaction (Asr) Gel In Cementitious Materials, Ashkan Hashemi

Doctoral Dissertations

"Since alkali-silica reaction (ASR) was recognized as a durability challenge in cement-based materials over 70 years ago, numerous methods have been utilized to prevent, detect, and mitigate this issue. However, quantifying the amount of produced ASR byproducts (i.e., ASR gel) in-service is still of great interest in the infrastructure industry. The overarching objective of this dissertation is to bring a new understanding to the fundamentals of ASR formation from a microwave dielectric property characterization point-of-view, and more importantly, to investigate the potential for devising a microwave nondestructive testing approach for ASR gel detection and evaluation. To this end, a comprehensive …

Geotechnical State-Of-The-Art In Guatemala -- Ground Stabilization, Fernando Rafael Callejas Benitez

Doctoral Dissertations

"History provides an understanding of the present and in a way, a guide for the future. The state-of-the-art is often referred to as a snapshot of the most significant works and contributions made in a field of study; In this case the focus is on Guatemalan geotechnical engineering. This study presents a comprehensive description of the different events that impulse geotechnical engineering in Guatemala.

As part of the description of the state-of-the-practice an investigation of the different human (engineers/contractors) and physical resources (laboratories/field equipment) and their capabilities are presented. An overview of the civil engineering programs is presented. Then, the …

Static And Dynamic Characterization Of Tied Arch Bridges, John Edward Finke

Doctoral Dissertations

"Tied arch bridges have been designed and constructed since the late 19th century. With their open vista owing to minimalist features tied arch bridges continue to appeal the public. Tied arch bridges are both aesthetic and economical alternates to long span bridges holding a place in the hierarchy of major bridges. They fit in a niche between viable and economical plate girder spans and short cable stayed bridge spans. There are several variations of the tied arch with the most common form being those having vertical hangers, stiff tie girders and slender arch ribs. This tied arch variation is examined …

Enhanced Pump Schedule Optimization For Large Water Distribution Networks To Maximize Environmental And Economic Benefits, Seyed Mohsen Sadatiyan Abkenar

Wayne State University Dissertations

For more than four decades researchers tried to develop optimization method and tools to reduce electricity consumption of pump stations of water distribution systems. Based on this ongoing research trend, about a decade ago, some commercial pump operation optimization software introduced to the market. Using metaheuristic and evolutionary techniques (e.g. Genetic Algorithm) make some commercial and research tools able to optimize the electricity cost of small water distribution systems (WDS). Still reducing the environmental footprint of these systems and dealing with large and complicated water distribution system is a challenge.

In this study, we aimed to develop a multiobjective optimization …

Finite Element Modeling Of Frp Strengthened Concrete Beams And Columns At Different Temperatures, Bassma Ibrahim Gawil

Wayne State University Dissertations

FINITE ELEMENT MODELING OF FRP STRENGTHENED CONCRETE BEAMS

AND COLUMNS AT DIFFERENT TEMPERATURES

By

BASSMA I. GAWIL

October 2016

Advisor: Dr. Hwai-Chung Wu

Major: Civil and Environmental Engineering (Structural Engineering)

Degree: Doctor of Philosophy

Collapse of buildings or bridges is one of the worst scenarios to which built-infrastructure

may be subjected during their lifetime. In recent years, due to external environmental conditions

(temperature and humidity). Often times these effects are not immediately evident and develop

years later – making determination of responsibility difficult and repair expensive.

Fiber reinforced polymer (FRP) has proven efficient and economical for the development

and repair …

The Impact Of Traffic Incident Locations On A Metropolitan Evacuation, Karzan Bahaaldin, Ryan N. Fries, Michael R. Williamson, Mashrur Chowdhury

SIUE Faculty Research, Scholarship, and Creative Activity

Modeling emergency evacuations can help engineers, planners, and emergency managers identify the approximate time it would take for evacuees to leave a disaster area. Unfortunately, many evacuation studies do not account for traffic incidents. This study examined the effect of traffic incidents during a no notice emergency evacuation in the eastern St. Louis metropolitan area road network. The roadway network was modeled using traffic micro-simulation software VISSIM, which utilized the expected traffic volumes that were determined by the regional planning agency, and guided by input from the transportation engineers at the Illinois Department of Transportation (IDOT). Because traffic speeds are …

Beneficial Reuse Of Marine Sediment, Sinead Tangney

Theses

Dredging is essential for ports and harbours to maintain navigational access. In Ireland approximately 1.2 million m^ is dredged annually and the management of this dredged sediment is an ongoing issue. This thesis investigates the management options available for marine dredged sediment and examines the technical, environmental and economic feasibility and social acceptability of a range of specific beneficial uses of marine sediment.

A literature review is presented on the international dredging industry and outlines why dredging is an essential infrastructural activity. Current dredged marine sediment management techniques are presented and discussed.

An overview of the Irish dredging industry is …

Structural Health Monitoring Of Composite Overwrapped Pressure Vessels, Luca Letizia

Honors Undergraduate Theses

This work is focusing to study the structural behavior of Composite Overwrapped Pressure Vessels (COPVs). These COPVs are found in many engineering applications. In the aerospace field, they are installed onto spaceships and aid the reorientation of the spacecraft in very far and airless, therefore frictionless, orbits to save energy and fuel. The intent of this research is to analyze the difference in performance of both perfectly intact and purposely damaged tanks. Understanding both the source and location of a structural fault will help NASA engineers predict the performance of COPVs subject to similar conditions, which could prevent failures of …

Behavior Of Concrete Beams With Corroded Reinforcement Retrofitted With Carbon Fiber Reinforced Polymer, Needa Marwan Lingga

Civil and Environmental Engineering Master's Project Reports

Severe premature deterioration has been reported in a large number of reinforced concrete (RC) structures in corrosive environments. This research project focused on the behavior of beams that contained corroded steel and were retrofitted with CFRP. The steel in RC beams were assumed to be fully corroded, representing the most severe loss in steel cross-section. Unidirectional CFRP sheets were used to strengthen the deteriorated beams. The experimental program included testing five simply supported rectangular cross section concrete beams. All beams were approximately 1/3^rd scale models, 4in. x 6in. cross sections, and 6ft. long. In three beams, the oiled steel …

Evaluating Arterial Congestion And Travel Time Reliability Performance, Galen T. Smith

Theses and Dissertations--Civil Engineering

This thesis presents an investigation of arterial travel time and reliability. Specifically an examination of the proposed arterial travel time reliability performance measures detailed in Federal Highway Administration’s Notice of Proposed Rulemaking on national performance management measures are performed. These measures, including level of travel time reliability and peak hour travel time ratio, are computed and compared to those currently used to quantify congestion and travel time reliability. Within this process several commonly used data sources are evaluated to determine the effects of data quality and data source on performance measure evaluation. The newly created Urban Streets Reliability tool is …

Using Unmanned Aerial Systems (Uas) And Photogrammetry To Remotely Assess Landslide Events In Near Real-Time, Jordan T. Keeney

Theses and Dissertations--Civil Engineering

Commercially available unmanned aerial systems (UAS) and photogrammetry software have undergone rapid advancements in recent years. However, the use of UAS and photogrammetry techniques for monitoring surface landform deformation has not been adopted for the most part due to complicated workflows and complex UAS systems. This study demonstrates the ability to monitor landslides in near-real time with commercially available UAS and photogrammetry software using direct georeferencing and co- registration techniques. The results of this research were then assessed to develop an optimal workflow for the rapid assessment of surface deformations with direct georeferenced UAS obtained imagery and photogrammetry software.

Evaluation Of Real World Toll Plazas Using Driving Simulation, Kali Carroll

Electronic Theses and Dissertations

Toll plazas are becoming an essential part of the highway system, especially within the state of Florida. Many crashes reported on highways occur at toll plazas. A primary reason for many vehicle collisions happening at these facilities is the fact that each toll plaza agency has different design, signage and marking criteria. This, in turn, causes driver confusion and possible last minute weaving maneuvers. Even though the varying design of toll plazas is a clear highway safety factor, research in the field is very limited but expanding. This study focuses on one toll plaza, in particular the Dean Mainline Toll …

Impact Of The Longer Change And Clearance Intervals On Signalized Intersections And Corridors, Mohammed Alfawzan

Electronic Theses and Dissertations

Evaluating the impact of longer change and clearance intervals on signalized intersections and corridors is the main goal of this study. In fact, the Florida department of Transportation (FDOT) has adopted a new signal retiming effort in a number of signalized intersections along several corridors. The Orange County started implementing the new signal timing from December, 2013 and completed it in June, 2015. The other objective of this new signal timing is to minimize the red light running rate. This study is dedicated to investigate the signal retiming effort adopted by the FDOT and how the new signal timing might …

The Effect Of Building Information Modeling On Design And Construction Industry, Yahya Alassaf

Electronic Theses and Dissertations

Construction industry's evolution is, historically, in the lowest level, if compared to other industries, such as auto manufacturing. Construction is a multidisciplinary industry, considering that designers, contractors, and owners are all involved in the same project, each one seeking their own interests. The complex environment surrounding design and construction makes the decision-makers hesitate about adopting new methodology. Building Information Modeling (BIM) is a new method and technology, which can improve both the design and the construction processes. The adoption of BIM is increasing significantly over the last years, and its effects can be seen on real life projects. In order …