Space Habitation and Life Support Commons^™

A Study Of Microgravity On Fluid Transport Through Porous Structures In Microfluidic Devices, Sylvain Le Henaff

Electronic Theses and Dissertations, 2020-2023

The objective of this study is to refine the understanding of micro-fluidics subject to micro-gravity in an attempt to support future space exploration efforts. A combination of experimental and numerical approaches were utilized to build a validated assessment approach. A quasi-pore geometry, inspired by CT scans of rat bones, was used in lieu of human bone structures. A quasi-1D assessment of the conservation of momentum was used to identify the dominant forces acting on the fluid at the operating length-scales. The dominant forces were surface tension, gravity, and shear stress. Experiments were conducted to visualize the flow moving through the …

Interactions Of Aerosol Droplets With Ventilated Airflows In The Context Of Airborne Pathogen Transmission, Steven Schroeder

Electronic Theses and Dissertations, 2020-2023

This multidisciplinary study provides a comprehensive visualization of airborne aerosols and droplets coming into contact with a crossflow of moving air utilizing both experimental particle measuring methods and multiphase computational fluids dynamics (CFD). The aim of this research is to provide a Eulerian visualization of how ventilation can alter the position and density of an aerosol cloud, with the goal of applying this information to our understanding of social distancing ranges within outdoor settings and ventilated rooms. The results indicate that even minor perpendicular crossflows across the trajectory of an aerosol cloud can greatly reduce both the linear displacement and …

Sensitivity Of Combustion Liner Contour To Sand Ingestion Clogging, Nelson Padilla

Electronic Theses and Dissertations, 2020-2023

This currently presented work is an evaluation of the characteristics of different cooling hole geometries to particulate ingestion clogging. Experimentation was conducted using a premixed bluff body flame combustor facility to generate high temperature combustor flow conditions. Sand ingestion along the cooling path of the combustion liner was reproduced using an air-assisted seeder providing consistent sand ingestion. Mass flow rate of cooling air was controlled using a sonic orifice downstream of a pressure regulator so that the mass flow rate of the air and sand mixture is independent of the clogging state. Pressure data upstream of a small section of …

Design And Mechanical Characterization Of Functionally Graded Sandwich Beams Fabricated Via Additive Manufacturing, Timothy Grondin

Electronic Theses and Dissertations, 2020-2023

Lightweight aerospace structures have been sought after since humans took flight in 1903, making major strides in NASA's pursuit of the moon with the development of sandwich panel composites. Sandwich structures typically consist of two stiff phases (i.e., face sheets) separated by a lightweight phase (i.e., core), which are stacked together through adhesive layers. Such a structural arrangement provides a high stiffness-to-weight ratio and is often used in applications where weight saving is critical. Functionally Graded Materials (FGMs), refer to multifunctional materials, which contain a spatial variation of composition and/or microstructure for the specific purpose of altering thermal and structural …

Quantification Of The Aerodynamic Drivers Of A Deployable Propeller, David Malyszek

Electronic Theses and Dissertations, 2020-2023

With the use deployable drones becoming more common research into their improvement is necessary. Deployable drones that are launched from tubes have size limits on the diameter of the propeller during launch and storage. The purpose of this research is to develop deployable propeller blades for practical uses, such as tube launched propeller driven drones and easier to transport wind turbine blades. A deployable propeller will allow for the utilization of larger propellers when a large non-deployable blade isn't an option. Because deployable propellers need to fold, the deployable propeller blades were designed to be hollow and with a slit …

Aerodynamic Characterization Of An Elliptical Fairing In The Wake Of A Bluff Body, Luis Amaya

Electronic Theses and Dissertations, 2020-2023

Aerodynamic optimization is a key step in designing planes, cars, and even buildings. Numerical modeling is used to automate the optimization process and can use different methods to iterate through designs. In this process, consideration of the starting design is paramount as a poor choice can use up computational time and effort. Often, these designs are made with the intention of being out in the open, for which studies on shape variations in freestream situations abound. However, for the case where an object must be placed in the wake of another, there is little research. The study presented here aims …

Wireless Power Transfer In Autonomous Mobile Microgrids, Carl Greene

Dissertations, Master's Theses and Master's Reports

The ability to autonomously dock unmanned ground vehicles plays a key role in mobile micro-grids, where efficient power transfer is paramount. The approach utilized in this work allows for near-field wireless power transfer in remote locations with minimal support. Establishing a micro-grid power system connection autonomously using wireless power eliminates the arduous task of designing a complex, multiple degrees of freedom (MDOF) robotic arm. The work presented in this thesis focuses on both the hardware and software within the micro-grid system. This particular near-field wireless system consists of a primary and secondary set of modules, comprised of Litz wire coils, …

Self-Acquisition Of Liquid Propellant Versatile Arsenal Of Resources Endeavour (S.A.L.V.A.R.E.), Vittorio Baraldi, Nikki Smith-Cielo, Sotirios Zormpas

Student Works

Unlocking the mysteries of Mars’s past and future habitability is just within humanity’s grasp. With a multitude of inherent similarities to Earth, Mars is one of the most promising locations to extend humankind’s reach in manned space exploration. As humanity is at the summit of taking the next leap for mankind by preparing the first crewed missions to Mars, a need that must be met is to significantly reduce the mass necessary to deliver to the surface.

The Self-Acquisition of Liquid propellant Versatile Arsenal of Resources Endeavour (SALVARE) project details a mission for creating the first Mars water-based In-Situ Resources …

Calorimetric Measurements Of Lunar Regolith Simulant And Water. An Experimental Study Correlating Weight Percent Water And Temperature Change Through Periods Of Phase Change., George B. Johnson

Dissertations, Master's Theses and Master's Reports

Permanently Shaded Regions (PSRs) are cold traps located around the lunar south pole that have been confirmed to contain possible interesting quantities or volatiles such as H2O, CO2, SO2, CH4, and others. [1] The identification of these volatiles on the lunar surface was a critical step in the development of NASA’s strategic goals for scientific discoveries, sustained space travel and exploration, and re-establishing a human presence on the moon. These volatiles are vital to the future of operating in and exploring space. The LCROSS impact revealed the existence of these resources in PSRs but more information is needed about the …

Lupa: An Excursion Vehicle For The Moons Of Mars, Shannon Kavanagh, Bo Lewis, Alex Odinamba, Joshua Mulhern

Senior Design Project For Engineers

Our team has designed a spacecraft and mission for exploring the moons of Mars. The Lithological and Ultraviolet Photometry Assessment (LUPA) excursion vehicle is capable of crew habitation, autonomous rendezvous, and in-vacuum sample collection all in support of a parallel Mars surface mission to be carried out in the year 2040. Our project's key focus areas revolve around orbital mechanics, space vehicle propulsion analysis, scientific exploration, and the management of various interconnected spacecraft subsystems.

Radiation Effects On Space Solar Cells At Various Earth And Jupiter Orbital Altitudes, Naazneen Rana

Discovery Undergraduate Interdisciplinary Research Internship

Solar cells are used as the primary power source for earth-orbiting satellites and as a primary/secondary power source for various missions within the solar system. However, high energy particles from the sun, planetary magnetospheres, and the galaxy can affect the performance and life expectancy of the space solar cell and associated power systems. As the interests for interplanetary travel and the exploration of planets within our solar system increase, the need to understand a device’s performance within a particular planet’s environment is necessary. Therefore, this study will analyze the performance of space solar cells, particularly the SolAero IMM-α, at various …

Plasma-Based Water Purification For Crewed Space Missions: Laboratory Experimental Comparisons For On-Board Applicability, Ryan P. Gott, Sydney D. Miller, Josie C. Hodges, Kunning G. Xu

PRC-Affiliated Research

Low-temperature, atmospheric pressure plasma presents a new, inexpensive, and environmentally friendly method of water purification. For long duration crewed space missions, a novel water purification system that does not rely on consumable filters and chemicals would be desirable. Plasma systems provide a viable option for these missions, but their operation and designs need to be optimized and compared to existing technology. For this application, gas and power usage are key limiting factors. In this work, water contaminated with methylene blue is purified with plasma. The rate of purification, gas flow usage, and power consumption are compared for multiple devices. A …

Plasma-Based Water Purification For Crewed Space Missions: Laboratory Experimental Comparisons For On-Board Applicability, Ryan P. Gott, Sydney D. Miller, Josie C. Hodges, Kunning G. Xu

PRC-Affiliated Research

Low-temperature, atmospheric pressure plasma presents a new, inexpensive, and environmentally friendly method of water purification. For long duration crewed space missions, a novel water purification system that does not rely on consumable filters and chemicals would be desirable. Plasma systems provide a viable option for these missions, but their operation and designs need to be optimized and compared to existing technology. For this application, gas and power usage are key limiting factors. In this work, water contaminated with methylene blue is purified with plasma. The rate of purification, gas flow usage, and power consumption are compared for multiple devices. A …

Effects And Solutions On The Human Body After Long-Duration Space Flights, Jose Jaime Esquivel Patricio

McNair Research Journal SJSU

During the Cold War, President John F. Kennedy made it a mission for the National Aeronautics and Space Administration (NASA) to accomplish a lunar landing and return to Earth. The final lunar landing and the last time humans left Low Earth Orbit (LEO) was in December, 1972. However, 47 years have passed and the fascination with traveling into deep space remains alive and flourishing. A major problem with future human missions to Mars is the effects of microgravity and Mars’ 0.38g environment. Unfortunately, space medicine is limited and little is known about the effects of microgravity on the human body …

Nasa Micro-G Next Challenge: Sample Container Dispensing Device, Kristin G. Kraybill-Voth, Kelsey L. Mickelson, Oscar D. Popravka

Mechanical Engineering

This Final Design Review (FDR) report outlines a Cal Poly San Luis Obispo senior design project developing a sample container dispensing device for NASA Johnson Space Center’s Micro-g NExT design challenge, a competition for university students. NASA aims to bring the first woman and next man to the moon through the Artemis missions beginning in 2024. The Micro-g NExT 2021 challenges focus on developing equipment which will support the Artemis mission, where Astronauts will conduct extensive geological sampling to further the scientific understanding of the moon. Our team designed, built, and tested a device that holds sample bags as they …

Space Suit Attachment Quick Release System, Elyse C. Gillis-Smith, Andres I. Elzaurdia, Cole H. Stanton, Michael T. Roth

Mechanical Engineering

NASA plans to make it back to the Moon by 2024 with their Artemis Program, and stay there for a longer period of time to conduct research which will support the future of space exploration. While on the lunar surface, astronauts need to maximize their efficiency by carrying tools on their Exploration Extravehicular Mobility Unit (xEMU), and to accommodate this need, the Extravehicular Activity (EVA) Tools Team is pursuing a utility belt concept. The objective of this project is to develop a system capable of interfacing between the utility belt and any given tool, while also accommodating numerous restrictions and …

Spacecraft Informatics, K. L. Yung, Lida Xu, Chris Zhang

Information Technology & Decision Sciences Faculty Publications

No abstract provided.

Modeling And Simulation Of Electromagnetic Fields To Maintain Bone Density During Prolonged Low Gravity Exposure, Austin Tapp, Michael Francis, Michel A. Audette

Electrical & Computer Engineering Faculty Publications

Astronauts in a long term, low-gravity environments experience bone density loss at 10 times the rate of those diagnosed with osteoporosis. One treatment effective at maintaining bone density in osteoporotic individuals is electromagnetic field (EMF) therapy. Tools that induce EMFs are becoming increasingly prevalent, but to amplify osteogenesis and encourage superior bone density retention for astronauts, ideal EMF therapy parameters must be determined on patient-specific bases. Therefore, this study explores simulation environments that elucidate highly favorable EMF factors. Pulsed electromagnetic field and combined magnetic field generating devices are variably introduced near partient-specific, finite element (FE) models of the femur, spine, …

Investigating The Feasibility Of 5g In A Lunar Environment, Adam Usher, William Wilcox, Taylor Modlin

Williams Honors College, Honors Research Projects

The goal of this project is to examine the feasibility of implementing a 5G wireless network in a lunar environment. In order to do so, the ideas and technologies behind 5G should be explored, as well as how it relates to previous wireless technologies in terms of speed, coverage, latency, and other important factors for a successful lunar network. A simplified representation of the lunar network was created to observe how the system would function. Two Arduino Uno boards were used alongside a wifi shield to simulate a lunar rover taking in data through sensors, compiling the data, sending it …

Celebrating 90-Orbits Around The Sun, Stafford Air & Space Museum

Programs

In celebration of the 90th birthday of Oklahoma astronaut and aerospace legend, Gen. Thomas P. Stafford, the Stafford Air & Space Museum in Weatherford, Oklahoma is offering free admission on September 17th, 2020.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].