Space Habitation and Life Support Commons^™

Artificial Intelligence In Human Spaceflight Safety-Critical Systems: A Requirements Framework For Ai-Enabled Computer-Based Control Systems, Liz Bosch

Doctoral Dissertations and Master's Theses

Currently, there is no governing standard that addresses the safe integration of AI into computer-based control systems (CBCS) in human spaceflight. The computer-based control expectations of those safety-critical systems on the International Space Station (ISS) are captured in SSP 50038, Computer-Based Control System Safety Requirements, with one caveat: the standard was not designed with AI applications in mind. SSP 50038 does not cover the probabilistic behavior, opacity, and training-data dependency of modern AI/ML systems. The objectives of this work is to develop an AI taxonomy relevant to safety characteristics (determinism, transparency, data dependency, failure predictability), systematically map AI characteristics against …

A Computational Approach To Graduated Centrifuge Profiles For Partial Gravity Planetary Environments, Cabell W. Jones

Mechanical & Aerospace Engineering Faculty Publications

Missions such as NASA’s Artemis and SpaceX’s Starship aspire towards creating permanent settlements beyond Earth. In order to achieve this goal, it must be considered that the gravity present on planetary surfaces such as the Moon (0.165 g) and Mars (0.378 g) may be insufficient to support human physiology for long term habitation. On near-Earth missions, issues such as muscular atrophy, neuro-ocular changes, cardiopulmonary variations, and bone mineral density loss have been observed proportional to the duration spent in microgravity. Further studies have suggested that the severity of these conditions scales linearly with decreasing gravity, meaning that astronaut health can …

Automation And Habitat Development For A Space Based Marine Life Environment, Logan Trimmer, Alexander Hang

Harrisburg University Other Works

This project was a cross-collaboration between the Environmental Sciences and Advanced Manufacturing and Robotics programs for the company Monolith Space.

The goal of this project was to design an autonomous system to be able to track qualities of water in an aquaculture system designed to be sent to space.

Performance Comparison Of A Low Mass Vibratory Lunar Surface Compactor In Vacuum Versus Atmosphere, Robin D. Austerberry

Dissertations, Master's Theses and Master's Reports

As space agencies prepare to return to the moon, an emphasis is being placed on establishing a sustained human presence that requires permanent structures and supporting infrastructure, making site preparation a critical factor. Michigan Technological University’s Planetary Surface Technology Development Lab has developed a novel low-mass surface compaction tool for use on a site preparation vehicle in collaboration with Colorado School of Mines. Testing in vacuum is necessary to simulate a relevant environment, which is required to increase the technology readiness level of this tool to TRL 5. Testing concluded significant interactions between the presence of atmosphere and other factors. …

System-Level Assessment Of Non-Ideal Phase Change Material Behavior In Low Earth Orbit Spacecraft Thermal Control Models, Nathan S. Bruursema

Dissertations, Master's Theses and Master's Reports

Phase change materials (PCMs) are of interest in spacecraft thermal control because their latent heat capacity can provide passive thermal buffering during transient or cyclic heat loads. PCM behavior is often treated using idealized assumptions such as repeatable phase transition temperatures, consistent thermal accessibility across cycles, and full latent recovery. However, practical PCM behavior may be affected by non-ideal phenomena such as supercooling, interfacial resistance, and degradation of internal transport accessibility. This thesis examines the system-level relevance of these effects for low Earth orbit (LEO) spacecraft thermal control and identifies the operating conditions under which non-ideal PCM behavior becomes design-relevant. …

Dynamic Modeling Of The Earth's Trapped Proton Environment, Xiaojing Xu, Steve R. Blattnig, Francis F. Badavi, Martha S. Clowdsley, Edward J. Semones

Physics Faculty Publications

Context: Reliable prediction of space radiation exposure is critical for safeguarding spacecraft systems and ensuring astronaut health during missions. Accurate radiation risk assessment for space mission requires advanced models of the Earth’s trapped proton environment. These models must reflect temporal variations driven by geomagnetic field evolution and solar cycle modulation. Existing static models, such as AP8 and IRENE-AP9, are not designed to fully capture these evolving conditions. Aims: This paper presents a dynamic modeling method for the prediction of trapped proton fluxes, which incorporate time-dependent variations due to geomagnetic field evolution and solar cycle fluctuations. Methods: The …

Made On Mars: Design And Manufacturing Of Structural Polymer-Regolith Composites, Pailey M. Vitale

Williams Honors College, Honors Research Projects

Human exploration of Mars is constrained by harsh environmental conditions and the prohibitive cost of transporting materials from Earth. Long-term sustainability requires the local production of mechanical and structural components using resources available on Mars, thereby minimizing payload mass. This project investigates polymer–regolith composites derived from atmospheric CO₂ and mineral-rich regolith as a pathway toward in-situ manufacturing. These composites, when compatible with additive manufacturing, could replace imported plastics, enable on-demand fabrication, and support closed-loop recycling systems. The objective is to design and evaluate polymer–regolith composites that maintain mechanical integrity and environmental resistance under Martian conditions, including extreme temperature swings, radiation …

Breaking The Vapor Barrier And Scale: Revolutionizing Steel Quenching With Ultrasound Technology, Anthony O. Santos

Williams Honors College, Honors Research Projects

The quenching process is a fundamental heat treatment used to enhance material properties by heating steel to its austenitizing temperature and rapidly cooling it to form high-strength martensite. However, this process is often hindered by two surface barriers: the Leidenfrost effect (vapor blanket) and oxide scale. These cooling limitations restrict the use of steel in high-performance aerospace applications due to inconsistent material properties and unpredictable engineering properties. This research investigates the use of fully submersible, 50-watt 40 kHz ultrasound technology to improve cooling rates in a Jominy test [4]. Through numerical simulations and experimental validation, the study demonstrates that acoustic …

Orbital Reliable Printed Circuit Boards, Thomas Maxwell Starnes, Keegan Blake Jordan, Ian Griffith, Grant Monroe Pesqueira, Vishal Navin Patel

Senior Design Project For Engineers

Deep Interstellar Solutions is proposing a device to produce custom, serviceable printed circuit boards (PCBs) in low Earth orbit. This technology uses blank PCBs that are laser-etched and prepared for electrical components, then stored in the module. This method of PCB production allows for rapid repairs or prototyping without the need for subsequent resupply missions. By implementing this technique, future missions will achieve greater autonomy, sustainability, and resource efficiency. The goal of this development is to pioneer the creation of custom circuitry for use in deep-space missions where resupply is neither cost-effective nor timely.

Surp: Space Robotics Laboratory Lab Manuals And Experiment Development, Connell Crawford

College of Engineering Summer Undergraduate Research Program

This SURP project is focused on the preparation of the lab, experiments, and operation procedures necessary for the proposed equipment in the Space Robotics Lab. As such, the primary goal is to create safety and test documentation that shall be used in the lab. Students selected for this project shall gain a hands-on learn-by-doing with equipment that is intended for teaching and research of a simulated planar space test environment for an air-bearing vehicle test bed to be able to test sensors, actuation and deployment of mechanisms, spacecraft collaboration through closed loop control, as well as experimental propulsion systems.

Extraction Of Aluminum From Lunar Regolith Through Molten Salt Electrolysis, Jacob N. Ortega, Todd P. Sander, Jeffrey D. Smith, Fateme Rezaei, David J. Bayless, William Schonberg, Daniel S. Stutts, Frank D. Han

Materials Science and Engineering Faculty Research & Creative Works

This paper presents the methodology, development, and results of an end-to-end regolith-to-metal concept for producing aluminum in-situ on the lunar surface, namely, the Lunar In-Situ Aluminum Production through Molten Salt Electrolysis (LISAP-MSE) method. Using electrolytic reduction, aluminum oxide (i.e., alumina) can be reduced into aluminum and oxygen via electrolysis in a molten salt bath. A steady supply of hydrogen chloride could allow this in-situ resource utilization (ISRU) method to supply several necessary materials consumed in the electrolytic reduction step of the process to produce bulk aluminum metal, oxygen, water, and silica from anorthite abundant in lunar highland regions. In this …

Sal-E: Responsive Space Pathfinder Mission, Adrian Serniak, Kayla Wong

College of Engineering Summer Undergraduate Research Program

The main objective of the SAL-E mission is to grow the Cal Poly CubeSat Lab’s (PolySat) capabilities in rapid spacecraft design and testing, as well as to provide the current generation of students with the opportunity to design, test, integrate, and communicate with a satellite. This summer we will mainly be focusing on aspects of spacecraft test and integration, as we prepare for our satellite handoff in the Fall. Specifically, we will be conducting satellite assembly, Thermal Vacuum Chamber (TVAC) Testing, Vibrations Testing, and software validation and testing on the flight unit satellite. Students participating in this multidisciplinary SURP will …

Terra Lunaris: Assessment Of A Lunar Habitat For Scientific Astronauts, Space Miners, Or Space Tourists, Dirk Schumann, Robert A. Goehlich

Publications

This conceptual paper explores ground- based habitable space modules for various applications. The Terra Lunaris concept serves as the baseline and is evaluated in comparison to existing and theoretical studies in this field. Terra Lunaris is a compact hybrid habitat that expands to offer nearly four times its transport volume by combining rigid modules with an inflatable shell. With most interior elements pre-installed and foldable, setup time and complexity are minimized. The design integrates technical zones, living quarters, and shared spaces, while also supporting psychological well-being under extreme conditions. The paper provides both qualitative and quantitative analyses of lunar habitation …

Towards Accountability: A Primer On The Space Debris Problem And An Overview Of The Legal Issues Surrounding It, William Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Since 1957, the near-Earth population of trackable space objects has grown in number to over 36,000. Of these 36,000+ trackable objects now in low Earth orbit, just a few thousand are working spacecraft. The rest are Earth-orbiting objects which are no longer operational and are considered to be space junk. Because this junk can no longer receive maneuvering commands from its Earth-based owners, the survivability of other spacecraft traveling through or operating in Earth orbit can be jeopardized by the impacts of any number of pieces of this space junk, whose origins can usually be traced back to defunct satellites. …

Evaluating The Physiological Effects Of A Spacesuit While Performing Cpr, Marielle Lenehan

Beyond: Undergraduate Research Journal

Limited research exists on the challenges of performing cardiopulmonary resuscitation (CPR) while wearing a spacesuit/pressure suit; but, during a space mission or following spacecraft egress, astronauts may need to perform Basic Life Support (BLS) on a crewmember. BLS consists of CPR and External Chest Compressions (ECC). In an emergency, astronauts may not have time to remove their intravehicular (IVA) spacesuits/pressure suits or wait for their heart rates to return to resting conditions and, therefore, would have to perform CPR while physically exerted. This study sought to evaluate the physiological exertion on rescuer performance while performing ECCs over 6 minutes while …

Re-Analysis Of The Anthropogenic Effect Of The Covid-19 Global Lockdown On Night-Time Lunar Surface Temperatures, W. Schonberg, S. Haque

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A study by Durga Prasad and Ambily observed an anomalous decrease in the lunar surface temperatures during the period April–May 2020, which they then attributed to the anthropogenic effects of the COVID-19 global lockdown effect. We have re-examined their data and while the anomalous decrease in the lunar surface temperature during April–May 2020 appears in our analysis as well, so does another significant dip in early 2018. Furthermore, the decline to the minimum observed during April–May 2020 is seen to begin in 2019, that is, quite some time before the COVID-19 event that led to the global lockdown and the …

Exploring Metal Additive Manufacturing In Martian Atmospheric Environments, Zane Mebruer

Mechanical Engineering Undergraduate Honors Theses

On-surface manufacturing is key to the success of a planetary colonization, especially that of Mars. However, traditional subtractive manufacturing processes are equipment, energy, and material intensive, meaning novel additive manufacturing (AM) processes must be pursued for this end. Selective laser melting, one of the most effective and versatile AM methods, would be incredibly beneficial to a Martian mission but requires an artificial argon atmosphere to create effective parts. The purpose of this study was to examine if carbon dioxide, the gas that makes up over 95% of Mars’ surface atmosphere, would be a sufficient substitute for argon in SLM fabrication. …

Mars Sample Return Earth Entry System Uncertainty Analysis, Michael D. Squire, Victor Cabrera, Eric Christiansen, Alan Jenkin, Kevin Hoffman, Quincy Mckown, Peter Parker, Glenn Peterson, Bruno Victorino Sarli, William P. Schonberg, Katie Steward, Brian Tulaba, Joel Williamsen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Spacecraft designers and operators use micrometeoroid and orbital debris (MMOD) risk assessments to predict the probability that an MMOD particle impact will cause a critical failure to their systems. An important aspect of MMOD risk and associated requirements is the treatment of uncertainty, often difficult to quantify, or even estimate, for many elements of MMOD risk. This paper describes recent efforts to estimate uncertainties in inputs to the MMOD risk assessment process for a portion of the planned Mars Sample Return (MSR) campaign. The uncertainty bounds developed were used to examine their effect on overall mission MMOD risk.

Analyzing Micrometeoroid And Orbital Debris Shield Performance For Sample Return Spacecraft, William P. Schonberg, Michael Squire

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Sample-return missions typically seek to collect and return samples from extraterrestrial locations to Earth for analysis. The return of samples from certain locations in the solar system represents a potential hazard to Earth's biosphere from foreign microorganisms. One way this could occur would be a break-up of the returning capsule during entry (which would disperse the samples through the air) due to undetected damage to the capsule thermal protection system (TPS). As a result, missions that plan to return payloads from some destinations are likely to have certain design requirements for the TPS surrounding their returning capsules, which may include …

Reduced Set-Shifting Processing Speed In Male Rats Following Low Dose (10 Cgy) Proton Exposure, Hui Ho Vanessa Chang, Gyutae Kim, Kyu-Sung Kim, Richard A. Britten

Center for Integrative Neuroscience and Inflammatory Diseases (CINID) Faculty Publications

Space radiation (SR) exposure poses significant biomedical risks, including effects on the central nervous system (CNS). These risks are particularly relevant to cognitive function during long-duration space missions. One critical cognitive skill is decision-making, which requires attentional set-shifting (ATSET)—the ability to quickly assess problems, evaluate options, and select the best actions. Previous studies have shown that exposure to However, the impact of low LET (< 1 keV/μm) protons, which significantly contribute to the total radiation flux astronauts encounter within spacecraft, on ATSET performance is unknown. To address this gap, we evaluated the effects of cranial irradiation with 10 cGy of 100 MeV/n protons (LET = 0.732 keV/μm) on ATSET performance in male Sprague-Dawley rats. We also investigated whether concurrent exposure to variable gravity (hypergravity step-up, step down, purported to have the same effect as exposure to microgravity (another major spaceflight stressor) exacerbated SR-induced cognitive deficits. Our findings indicate that proton exposure alone significantly impaired ATSET performance, as evidenced by decreased processing speed while performing compound discrimination reversal and extra-dimensional shifting. Notably, no additive or synergistic effects were observed when hypergravity was combined with proton exposure. The impact that low-dose proton exposure has on CNS functionality, particularly in reducing processing speed during complex tasks, warrant further investigation. If similar cognitive deficits were to occur in astronauts exposed to galactic cosmic rays, mission success and safety could be significantly compromised.